Purpose of Object class:Production & Profit analysis

Dear All,
While creating the Internal Order,we need to select the one of the Object class,(i.e Overhead,Investment,Production or Profit Analysis) 
I know the purpose of Overhead and Investment Object Class,but I could not understand the purpose of Production & Profit Analysis Object Classes.
Can anybody share an information with little examples about the purpose and in which scenario the Production & Profit Analysis would be used .
Regards
Su

Dear All,
Please throw some light on the purpose of  Object Classes :Production and Profit Analysis ,while using the Internal Orders.
Regards
Su

Similar Messages

  • How to confirm activity for Internal order having object class PRODUCTION

    Hi,
    We have Internal order which has object class PRODUCTION. In it material and labour cost got confirmed
    Here my doubt is how can I check the activity confirmation details in the system (Not CO15)
    In otherwords how can I display internal order activity confirmation
    I ll be grateful anybody answer quickly
    Regards
    Sneha

    Hi Sneha
    1. You can use KB21N - Screen variant ALL
    2. If you want to check any postings on this Interna order - Use KOB1
    Regards
    Ajay M

  • Object Classes - purpose

    Hi,
    Can someone please clarify the purpose of Object classes?
    Are they just to define which modules can use which authorisation objects (via which object classes can be used by each module)?
    Thanks,
    Ben

    Hi Ben,
    Welcome to SDN,
    Please go through this link..
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0a33479c-0b01-0010-7485-dc8c09d6bc69
    And check this link
    [Why to use ABAP OBJECTS|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3e59b790-0201-0010-88aa-bc8a7f95f6fb]
    Hope this would help you.
    Good luck
    Narin

  • Object Class -Thread

    Hai Respected Friend ,
    I have one doubt regarding Object Class. for what purpose the Object class has some methods like Notify(),Notify All(),wait() though we are not using those methods except with Thread class.
    why they are defined these methods in the Object Class ,why not in the Thread Class even though it is only useful with Thread Class.
    Please give clear ans.
    Thanks
    Selvakumar

    BigDaddyLoveHandles wrote:
    malcolmmc wrote:
    Actually, though these methods are useful only in a multi-threaded environment, no Thread objects are directly involved. What you need to specify isn't a thread object (the current thread is always the one affected) but the monitor, which can be any kind of Object.I would have been happy if they had defined a Lock class with wait and notify methods, because I prefer doing:
    public class C {
    private final Object lock = new Lock();
    public void method() {
    synchronized(lock) {...}
    }to
    public class C {
    public synchronized void method() {
    }In the second case, you have to contend with other code incorrectly calling wait/notify on an instance of C.
    So I don't see the win in these being java.lang.Object methods, other than allowing you to create one less object -- what an efficiency win ;-)However, there are times when it makes sense to expose the lock. For instance Collections.synchronizedXxx.

  • List of Object Classes

    Hello,
    Does anyone know the relationship between 'Object Class' and R/3 Document Types... My question is how one determines, for example, that VERKBELEG pertains to Sales Document Changes; and LIEFERUNG is for ... and so on...? Where in R/3 (or in Help Documentation)is this defined?
    This relationship is helpful in searching thru the massive table CDHDR.
    The table TCDOB <b>only</b> lists all of Object Classes.
    Thanks in advance.
    Naved

    Hello Naved,
    I do not think that the Object List will be linked to a document type. At best, we can expect to find the purpose of an Object Class, as intended (not "defined") by SAP.
    If you go to the table TCDOBT (text table of TCDOB), you will find the descriptions of each of the change document classes, as given by SAP. For Example,
    LIEFERUNG          Delivery
    LIBE               Change document vendor evaluation
    VERKBELEG          Sales document
    PRCTR              Profit center master record
    PRODCAT            Product catalog
    and so on.
    Also, there's a Function Module that you might find to be useful - CDNAMES_GET.
    If you want to find out the Object Class for a particular scenario, the best way that I can think of is to go to the table TCDOBT and search with the help of the OBTEXT field.
    Hope this information was helpful. All the best.
    Regards,
    Anand Mandalika.

  • Purpose of debug class and limits in pipelinesession

    Hi
    What is the purpose of debug class(com.bea.p13n.util.debug.Debug)? I found
    it in an InputProcessor. Also I am unable to find the javadocs for it.
    My next question may seem trivial, but is there any limitation to the number
    of attributes that can be set in the pipelinesession object or something like
    that?
    Thanks,
    Raghu

    Hi Raghu,
    I think those are internal java classes used by the portal server. To your next
    question, i am not aware of any limitation on the number of pipeline attributes.
    Regards
    Syed
    "Raghu V.N" <[email protected]> wrote:
    >
    Hi
    What is the purpose of debug class(com.bea.p13n.util.debug.Debug)?
    I found
    it in an InputProcessor. Also I am unable to find the javadocs for it.
    My next question may seem trivial, but is there any limitation
    to the number
    of attributes that can be set in the pipelinesession object or something
    like
    that?
    Thanks,
    Raghu

  • Internal Order , object class related issue

    hi
    when i created internal order with the object class (Assignment Tab) :- Investment and not specified any assignment like (cost center ) i am  able to view line items posted to internal order by transaction KOB1
    but if i am selecting object class as Overhead and not specified any other assignment like (cost center )i am not able to see actual posted line items . so How we will get this line items ?
    is there any other transaction available ?
    Thanks in advance
    sachin

    HI,
    I can view real actual postings for order object classes "Overhead costs, Investment, Production" using KOB1.
    Check your postings (value type!) and your KOB1 selection screen.
    Best regards, Christian

  • Object Class and Object Id for material Determination tables.

    I want to know what is the Object Class and Object Id for material Determination records to verify tables CDHDR and CDPOS.
    The purpose is to know the changes done by the different users for material determination records.
    Can any one help.

    Hi ZZZSUNNY,
    Similar question is answered recently.Please find the below link which will helps you
    Material determination: how to see the creater of a record?
    Thanks
    Dasaradha

  • GRC10 Exclude Objects (Roles) - Batch Risk Analysis Job

    All -
    We are setting up some non-production GRC 10.1 systems at this time and are trying to exclude project roles from our dashboards via the "Maintain Exclude Objects for Batch Risk Analysis" table [SPRO --> GRC --> AC --> ARA --> Batch Risk Analysis].
    The problem that we are encountering is that this Batch Risk Analysis is taking an extremely long time to run on our Project Users even though we have excluded the project roles that these users are assigned.
    For example, User A has 3 project roles which hit a very large number of SoD violations in our rule set, however in the exclusion list we have defined the three roles the user is assigned to be in the exclusion table for All systems and for the specific system that the job is running against. With no luck. The job still takes an average of 30 minutes to run on each user even though the roles they are assigned are excluded.
    We have tested that the exclusion table works because we can exclude the users by adding them to this table and we can also exclude the groups that they are in and this also works. However we have instances where there are other users in this groups that have other roles in addition to these excluded roles that need to be checked.
    Does anyone have any recommendations for how to excluded roles so that the job quickly checks the users with these roles? It is my understanding that if the roles are in the exclusion list they should be skipped by the Batch Risk Analysis job which is running to check these users for the dashboards.
    Thanks,
    Darnell

    Hi,
    Was a solution found for this error?
    Thanks,
    Glen

  • Object class in WBS should be blank

    Hi Friends,
    I am activating the project definition and tope level WBS element from appropriation request(AR),
    I am creating AR and releasing it theN--> in AR measures/asset tab and activating project definition and WBS there and saving .
    Now project definition and top level WBS element is created.
    Now I want that in top level WBS in assignment tab object class should be blank , it is coming as Investment.
    Any pointers
    Thanks
    Ashu

    Thanks
    Am agreed.
    Actually this problem I am getting in production after releasing the measures object class is coming blank in top level WBS
    am trying to test in development but i am getting object class once measures are released.
    Thanks
    Ashu

  • Product-profit center

    Hi guys,
    Rules & any documentation to map Product categories from legacy system to Profit centers...unable to approach the issue...any help...thanks

    We created a custom infoobject for our legacy products. Inside that custom object we added profit center as an attribute.
    When loading the data from your legacy system you have the product, in the update rules map the profit center as a attribute of what ever product is in the record.
    Done.

  • REO Profit. analysis//5  Profitability Analysis

    Hi Expert,
    I am facing an issue on controlling document, when i do posting in WTY (warraty module) in DBM project (SAP R/3).
    My FI doc is posted to correct profit center but when i check on controlling document, it show "REO Profit. analysis//5  Profitability Analysis". Other controlling document will show correct internal order number.
    Is this issue related to Profitability Analysis? As i did not activate profitability analysis in DBM ERP.
    Please advice is there any configuration i missed out?
    Thanks.
    regards,
    chuan

    Hi
    This issue arises when category 11 or 12 cost elements are posted w/o a true CO object i.e. you enter only the PC as the account assignment obj for revenues
    Make message KI 166 as E in OBA5.. You wont be allowed to post w/o entering a true CO object (Like IO, PSG etc)
    As of now, you can modify the CO object using KB61 for the posted docs
    br, Ajay M

  • Directory Editor adding object classes to the Extensions Tab

    I'm using Sun's Directory Editor web based product. Under the extensions tab lists the object classes you can add (obviously there are only a select few there). I would like to have shadowAccount available there. I have went through the installation and configuration guide but can't find how to do this. Just wondering if anyone knows how to add custom object classes to this tab.

    I'm using Sun's Directory Editor web based product.
    Under the extensions tab lists the object classes you
    can add (obviously there are only a select few
    there). I would like to have shadowAccount available
    there. I have went through the installation and
    configuration guide but can't find how to do this.
    Just wondering if anyone knows how to add custom
    object classes to this tab.this link has such an example:
    http://blogs.sun.com/kevlar/entry/directory_editor_tips
    Disclaimer: that's my feedback under the blog post. I'm trying to figure out how to use DE to maintain an extended schema that includes migrated NIS maps. The overall goal is to migrate from NIS to LDAP as a naming service AND create realistically easy method for day-to-day administration (constantly using the console is out of the question). I believe DE might provide a solution, if custom forms can be figured out. It's been very slow going.
    Does anyone else have examples of modifying Directory Editor forms? Any help would be appreciated.
    Thanks,
    Ron

  • HashCode function in Object class.

    Hi! to all!
    I have got a confusion about hashCode function of Object class, which returns an integer.
    What is the real purpose of introducing this method in Object class.
    Please comment.

    hashCode() method of the object is intorduced for the benefit of collections like HashTables. Typically
    hashCode method should return distinct integers for distinct objects which are decided distinct based on
    equals method of the object. Though this is not mandatory , if distinct objects have distinct
    hashCodes, it will improve the performance of HashTables.A good distribution of hash codes will indeed help in the performance of a HashMap or Hashtable. However, by definition, hashcodes are not necessarily distinct for objects that are distinct based on equals. Two objects for which "equals" is true should have the same hashcode, but two objects which have the same hashcode don't have to have "equals" be true. There is a limited number of hashcodes (the range of int), but an unlimited number of objects. So, some objects will necessarily have the same hashcode. The pigeonhole principle describes this situation:
    http://en.wikipedia.org/wiki/Pigeonhole_principle

  • Use of Object Class-INVESTMENT on KO04

    Dear experts,
    Pls explain me what is purpose of using Investment as the Object class??
    by using this object class is it possible to prevent cost going to consumption Account(P&L)??
    My requirement is to capture cost to balance sheet once u done the GR for materials which u procure using Internal order...
    Your advices are highly appreciated..
    Reg,
    Sampath

    Hi Sneha,
    Object Class "Investments" is realted to Investment Orders. Especially when you implement "Investment Management" module, once the "Apporpriation Request" (in IM Module) is of "Approved" status, then, we need to have some "Investment Measures" (Internal Orders or WBS Elements) ready in the system so that the Plan Values on the Appropriation Requests can be moved to Investment Measures.
    You make settings about the Object Class in the "Order Types".
    If there is no Investment Management module implemented, still, Investment Object class is useful to capture the cost of AUC.
    Hope this clarifies, pls revert back for further explanation...
    Srikanth Munnaluri

Maybe you are looking for