Purpose of the function modules BAPI_IOBJ_GETDETAIL, BAPI_MDPROVIDER_GET_ME
Hi,
Can any one please explain the following doubts...
1) What is the purpose of the function modules BAPI_IOBJ_GETDETAIL, BAPI_MDPROVIDER_GET_MEMBERS and when will they be used in BW, the purpose.
2) What are the different function modules useful in tracing the performance on the BW Side?
Thanks & Regrads,
Dinakar.
HI,
BAPI_IOBJ_GETDETAIL:
To get the information about the InfoObjects.
BAPI_MDPROVIDER_GET_MEMBERS:
when you call BAPI_MDPROVIDER_GET_MEMBERS, BI hierarchies with
time-dependent names or time-dependent structures are also evaluated with the
current key date.
Check this thread and the link
List Of BAPIs used for Extraction..?
http://help.sap.com/saphelp_nw04s/helpdata/en/9b/c1993c54966f3ae10000000a114084/frameset.htm
Similar Messages
-
Pls explain me the use and purpose of following Function modules
pls explain me the use and purpose of following Function modules
1. G_MAX_PERIOD_AND_OFFSET_GET
2. DEQUEUE_E_TABLE
3. FI_COMPANY_CODE_CHECK
4. G_PERIOD_GET
5. alv_display_function
6. G_SET_GET_ID_FROM_NAME
thanks ,
phyrose1. <b>G_MAX_PERIOD_AND_OFFSET_GET</b>
For given No. of period & periods it gives the offset
<b>2. DEQUEUE_E_TABLE</b>
To Unlock the table records
<b>3. FI_COMPANY_CODE_CHECK</b>
To validate Company Code
<b>
4. G_PERIOD_GET</b>
Returns no. of Posting period & Special period for give company code, posting date & ledger
<b>5. alv_display_function</b> -
No such FM exists
<b>
6. G_SET_GET_ID_FROM_NAME -</b> Use this module to derive the internal set Id from the name that appears on the user interface, for example, in order then to import the set (see the function group documentation).
The function module first determines a candidate list of sets based on the set name and the class that might have been specified that could match the set name. The class can also be masked (e.g. 000+ for all FI-SL sets, including dynamic sets). -
Information about the function module SAPWL_READ_STATISTIC_FILES
Hi all,
I want to know the use of the given sap standard function module SAPWL_READ_STATISTIC_FILES.
In this all_stats change parameter is there. what exactly it is returning i want to know and what is the purpose of this function module? There is no documentation available in english language for this.
thanks in advance
g.s.naiduHi Mahalakshmi garu
Yes, the previous thread itself has been posted by me, but till now i didnt get the purpose of that function module. as you said it reads the historical records for a day or week or month. Thats right but can you give me some more details like the same in depth.
Thanks
g.s.naidu -
Could i use the function module in my BAPI
Hi,
guys i am confused, can i use the standard function module which has not been released, in my BAPI.
BAPI is used for cross applications.
regards,
chintaHi Chinta
It is not advisable to use a not released Function Module for any business purpose, as there is always a chance that, the function module may get changed. So it is better to create a custom function module and use it.
Thanks and regards,
Rinzy Deena Mathews. -
Purpose of this function module:HR_BEN_MAP_SELOPT_TO_DYNSEL
Hi,
I could see in many benefit standard programs using the function module HR_BEN_MAP_SELOPT_TO_DYNSEL. I just want to know purpose of this.
This FM does not have any documentation to know what it is.
Please share if you know why and how it works.
Thanks,
Ravi.Speaking as someone who happens to be named Michael Broughton ;), let me note that I did not depend on trying to parse the OWB runtime repository to determine the last run status for a given mapping. I used a set of our own tables that we use to audit various processes that run against our database.
Similar to you, we had the notion of a master process and sub-processes. So, our load could be described as:
Insert master process row with status "Started".
For each mapping to execute:
insert a sub-process row with status "started"
if the last run of the master process ran to "COMPLETE", or the last run of this master process ran to "FAILED" but there is no row for this sub-process with status "COMPLETE", then we need to run the process. run it and update the sub-process row with the return status. If status <> OK, then update master process to status "FAILED" and exit.
otherwise, If we determined that the mapping did not need to be executed, then update the sub-process row with status "COMPLETE"
We put in the stubs for the processes whether we need to run them or not so that if the load fails multiple times, each run will contain the complete list of mappings that were completed.
In point of fact, if you insert the stubs when skipping over mappings during a restart then you can condense the "do I need to run this time" logic to: Run allways unless the last master process run failed but this process succeeded.
How you want to code that query will depend entirely on how you are saving your data.
Hope this helps. I'd offer code snippets but I away from my work 'puter 'til next week.
Mike -
What is the transaction to trace all the function module and its returned m
HI ,
What is the transaction to trace ALL the function module and its returned messages in a program/transaction execution?
Thank you.You can use this function module for that purpose.
RS_CROSSREFERENCE -
List out the function modules..
Hi Friends..
I want to list out all the available function modules and also i want to store all the function modules in internal table for that purpose what can i do..
Thanks
GowrishankarHere is the porgram to display the list of functionmodules in the SAP IN alv.
*& Report ZDEMO_ALVGRID *
*& Example of a simple ALV Grid Report *
*& The basic requirement for this demo is to display a number of *
*& fields from the TFDIR table. *
REPORT zdemo_alvgrid .
TABLES: TFDIR.
type-pools: slis. "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_TFDIR .
include structure TFDIR .
types : END OF t_TFDIR.
DATA: it_TFDIR TYPE STANDARD TABLE OF t_TFDIR INITIAL SIZE 0,
wa_TFDIR TYPE t_TFDIR.
select-options : s_FUN for TFDIR-FUNCNAME.
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
gd_tab_group type slis_t_sp_group_alv,
gd_layout type slis_layout_alv,
gd_repid like sy-repid.
*Start-of-selection.
START-OF-SELECTION.
perform data_retrieval.
perform build_fieldcatalog.
*perform build_layout.
perform display_alv_report.
*& Form BUILD_FIELDCATALOG
* Build Fieldcatalog for ALV Report
form build_fieldcatalog.
fieldcatalog-fieldname = 'FUNCNAME'.
fieldcatalog-seltext_m = 'Purchase Order'.
fieldcatalog-col_pos = 0.
fieldcatalog-outputlen = 10.
fieldcatalog-emphasize = 'X'.
fieldcatalog-key = 'X'.
* fieldcatalog-do_sum = 'X'.
* fieldcatalog-no_zero = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'PNAME'.
fieldcatalog-seltext_m = 'PO Item'.
fieldcatalog-col_pos = 1.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'INCLUDE'.
fieldcatalog-seltext_m = 'Status'.
fieldcatalog-col_pos = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'FREEDATE'.
fieldcatalog-seltext_m = 'Item change date'.
fieldcatalog-col_pos = 3.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'APPL'.
fieldcatalog-seltext_m = 'Material Number'.
fieldcatalog-col_pos = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MAND'.
fieldcatalog-seltext_m = 'PO quantity'.
fieldcatalog-col_pos = 5.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'FMODE'.
fieldcatalog-seltext_m = 'Order Unit'.
fieldcatalog-col_pos = 6.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'HOST'.
fieldcatalog-seltext_m = 'Net Price'.
fieldcatalog-col_pos = 7.
fieldcatalog-outputlen = 15.
fieldcatalog-do_sum = 'X'. "Display column total
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'UTASK'.
fieldcatalog-seltext_m = 'Price Unit'.
fieldcatalog-col_pos = 8.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT
* Build layout for ALV grid report
*& Form DISPLAY_ALV_REPORT
* Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = gd_repid
* i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
* i_callback_user_command = 'USER_COMMAND'
* i_grid_title = outtext
is_layout = gd_layout
it_fieldcat = fieldcatalog[]
* it_special_groups = gd_tabgroup
* IT_EVENTS = GT_XEVENTS
i_save = 'X'
* is_variant = z_template
tables
t_outtab = it_TFDIR
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISPLAY_ALV_REPORT
*& Form DATA_RETRIEVAL
* Retrieve data form EKPO table and populate itab it_TFDIR
form data_retrieval.
select *
from TFDIR
into table it_TFDIR where FUNCNAME in s_FUN.
endform. " DATA_RETRIEVAL
reward points if it is usefull ..
Girish -
Purpose of this function module?
Hi Abapers,
Please let me know the purpose of this function module.
RH_START_EXCEL_WITH_DATA.
regards,
vijayHi vijay,
1. Suppose i want to show some data
DIRECTLY IN EXCEL,
from my internal table.
2. Just copy paste in new program.
(it will show data from T001 Table,
directly into excel)
3.
report abc.
data : itab like table of t001 with header line.
select * from t001 into CORRESPONDING FIELDS OF table itab.
CALL FUNCTION 'RH_START_EXCEL_WITH_DATA'
EXPORTING
DATA_FILENAME = '\ABCdd.XLS'
DATA_TABLE = ITAB[]
WAIT = 'X'
DELETE_FILE = 'X'
EXCEPTIONS
NO_BATCH = 1
EXCEL_NOT_INSTALLED = 2
INTERNAL_ERROR = 3
CANCELLED = 4
DOWNLOAD_ERROR = 5
NO_AUTHORITY = 6
FILE_NOT_DELETED = 7
OTHERS = 8.
regards,
amit m. -
Error during generation of the function module..need help urgently
Hello everyone,
m trying to generate data source in BWDevelopment.
After mapping all the BW fields to Source Object elements I click on Generate DataSource(for UD Connect) so following error comes
'An error occurred in step 1 during generation of the function module'
RFC connection is fine, error free and extractor is also fine.
Where could be the problem?
Thanks & Regards,
PriyankaHello everybody,
my problem is solved.For the UDConnect, whatever DATA SOURCES you create gets registered in a FUNCTION MODULE which has a capacity of only 99 enties, so to increase it implement the SAP NOTE 876340 - UDC Error available on SERVICE MARKET PLACE.
This problem occurs with BW version 3.5 level 17 or below.
Regards,
Priyanka
Edited by: Priyanka Joshi on Jun 10, 2008 11:03 AM -
Jobs to run the function modules to extract the generic extarctors
Gurus,
I have a Datasource 'ZCMS_PP_TRAN' with extract structure 'ZBW_ST_CMSD_PP'. The extract structure is populated using the function module Z_BW_GET_CMSD_PP.
But how do I schedule this FM or in general, are they run using std programs?
Thanks,
SimmiHi Simmi,
what ever it may be the DS(i mean Business Content DS, Generic DS).... these will extract the Data using Dynamic Function Calls(not always). Comming to Generic DS using FM, this will be called using Dynamic Function Module.
In RSA3 or while extracting data from BW, you will pass request number, Update Mode, debugging option, selection fields, BW source System ID, DS Name.
Based on these details system will extract the underlying extract structure and function module(or table/view/infoset).
No job(Job created from BW while extracting data in the source system BI_requestid) created for Generic DS while extracting data in SAP.
For Queue Delta, Background job will be created, it will move the data to Delta Queue.
i will update the thread with related function modules. Try to debugg in RSA3, you could find all the information.
all the best.
Nagesh. -
Not able to use Commit after the function module STATUS_OBJECT_CREATE
I am using function module STATUS_OBJECT_CREATE
CALL FUNCTION 'STATUS_OBJECT_CREATE'
EXPORTING
CHGKZ = 'X'
CLIENT = SY-MANDT
OBJNR = LV_OBJNR3
OBTYP = 'IWE'
STSMA = 'ZS_RE_01'
IMPORTING
OBJNR = LV_OBJNR3.
STONR = LV_STONR.
IF SY-SUBRC = 0.
COMMIT WORK.
ENDIF.
i am getting error after the COMMIT WORK .
I am not getting any issue in the function module .after the function module i am using the COMMIT WORK and i am getting the following error message
Category ABAP Programming Error
Runtime Errors SAPSQL_ARRAY_INSERT_DUPREC
Except. CX_SY_OPEN_SQL_DB
ABAP Program SAPLBSVU
Application Component CA-GTF-TS-SMT
Date and Time 03/17/2014 07:01:29
|Short text |
| The ABAP/4 Open SQL array insert results in duplicate database records. |
|What happened? |
| Error in the ABAP Application Program |
| |
| The current ABAP program "SAPLBSVU" had to be terminated because it has |
| come across a statement that unfortunately cannot be executed. |
|What can you do? |
| Note down which actions and inputs caused the error. |
| |
| |
| To process the problem further, contact you SAP system |
| administrator. |
| |
| Using Transaction ST22 for ABAP Dump Analysis, you can look |
| at and manage termination messages, and you can also |
| keep them for a long time. |
|Error analysis |
| An exception occurred that is explained in detail below. |
| The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught |
| in |
| procedure "STATUS_UPDATE" "(FUNCTION)", nor was it propagated by a RAISING |
| clause. |
| Since the caller of the procedure could not have anticipated that the |
| exception would occur, the current program is terminated. |
| The reason for the exception is: |
| If you use an ABAP/4 Open SQL array insert to insert a record in |
| the database and that record already exists with the same key, |
| this results in a termination. |
| |
| (With an ABAP/4 Open SQL single record insert in the same error |
| situation, processing does not terminate, but SY-SUBRC is set to 4.) |
|How to correct the error |
| Use an ABAP/4 Open SQL array insert only if you are sure that none of |
| the records passed already exists in the database. |
| |
| If the error occures in a non-modified SAP program, you may be able to |
| find an interim solution in an SAP Note. |
| If you have access to SAP Notes, carry out a search with the following |
| keywords: |
| |
| "SAPSQL_ARRAY_INSERT_DUPREC" "CX_SY_OPEN_SQL_DB" |
| "SAPLBSVU" or "LBSVUU01" |
| "STATUS_UPDATE" |
| |
| If you cannot solve the problem yourself and want to send an error |
| notification to SAP, include the following information: |
| |
| 1. The description of the current problem (short dump) |
| |
| To save the description, choose "System->List->Save->Local File |
| (Unconverted)". |
| |
| 2. Corresponding system log |
| |
| Display the system log by calling transaction SM21. |
| Restrict the time interval to 10 minutes before and five minutes |
| after the short dump. Then choose "System->List->Save->Local File |
| (Unconverted)". |
| |
| 3. If the problem occurs in a problem of your own or a modified SAP |
| program: The source code of the program |
| In the editor, choose "Utilities->More |
| Utilities->Upload/Download->Download". |
| |
| 4. Details about the conditions under which the error occurred or which |
| actions and input led to the error. |
| |
| The exception must either be prevented, caught within proedure |
| "STATUS_UPDATE" "(FUNCTION)", or its possible occurrence must be declared in |
| the |
| RAISING clause of the procedure. |
| To prevent the exception, note the following: |
|System environment |
| SAP Release..... 702 |
| SAP Basis Level. 0010 |
| |
| Application server... "sds6ci" |
| Network address...... "11.224.101.53" |
| Operating system..... "Linux" |
| Release.............. "2.6.18-194.el5" |
| Hardware type........ "x86_64" |
| Character length.... 16 Bits |
| Pointer length....... 64 Bits |
| Work process number.. 17 |
| Shortdump setting.... "full" |
| |
| Database server... "gctsdb01lds.hsi.hugh" |
| Database type..... "ORACLE" |
| Database name..... "DS6" |
| Database user ID.. "SAPDS4" |
| |
| Terminal.......... "GCTEMP02VDI" |
| |
| Char.set.... "C" |
| |
| SAP kernel....... 720 |
| created (date)... "Sep 14 2013 05:28:14" |
| create on........ "Linux GNU SLES-9 x86_64 cc4.1.2 use-pr130820" |
| Database version. "OCI_102, 10.2.0.5.0, V2, default" |
| |
| Patch level. 500 |
| Patch text.. " " |
| |
| Database............. "ORACLE 10.1.0.*.*, ORACLE 10.2.0.*.*, ORACLE 11.2.*.*.*" |
| SAP database version. 720 |
| Operating system..... "Linux 2.6, Linux 3" |
| |
| Memory consumption |
| Roll.... 1317248 |
| EM...... 0 |
| Heap.... 0 |
| Page.... 0 |
| MM Used. 1242912 |
| MM Free. 53400 |
|User and Transaction |
| Client.............. 160 |
| User................ "DV018458" |
| Language key........ "E" |
| Transaction......... "SE38 " |
| Transaction ID...... "5323C30FC9364665E10000000BE06533" |
| |
| EPP Whole Context ID.... "002655EE0F241ED3ABB7D81260A28C44" |
| EPP Connection ID....... 00000000000000000000000000000000 |
| EPP Caller Counter...... 0 |
| |
| Program............. "SAPLBSVU" |
| Screen.............. "RSM13000 3000" |
| Screen Line......... 2 |
| Debugger Active..... "none" |
|Information on where terminated |
| Termination occurred in the ABAP program "SAPLBSVU" - in "STATUS_UPDATE". |
| The main program was "RSM13000 ". |
| |
| In the source code you have the termination point in line 60 |
| of the (Include) program "LBSVUU01". |
| The program "SAPLBSVU" was started in the update system. |
| The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in |
| procedure "STATUS_UPDATE" "(FUNCTION)", but it was neither handled locally nor |
| declared |
| in the RAISING clause of its signature. |
| |
| The procedure is in program "SAPLBSVU "; its source code begins in line |
| 1 of the (Include program "LBSVUU01 ". |
|Source Code Extract |
|Line |SourceCde |
| 30| LOOP AT jsto_upd WHERE chgkz = 'X'. |
| 31| CHECK: jsto_upd-chgnr > '000', |
| 32| jsto_upd-stsma NE jsto_upd-stsma_old. |
| 33| CLEAR jcdo_tab. |
| 34| MOVE-CORRESPONDING jsto_upd TO jcdo_tab. |
| 35| MOVE-CORRESPONDING chdat TO jcdo_tab. |
| 36| jcdo_tab-stsma_new = jsto_upd-stsma. |
| 37| APPEND jcdo_tab. |
| 38| ENDLOOP. |
| 39|* Änderungen zu Einzelstatus (Insert) |
| 40| LOOP AT jest_ins WHERE chgkz = 'X'. |
| 41| CHECK jest_ins-chgnr > '000'. |
| 42| CLEAR jcds_tab. |
| 43| MOVE-CORRESPONDING jest_ins TO jcds_tab. |
| 44| MOVE-CORRESPONDING chdat TO jcds_tab. |
| 45| jcds_tab-chind = 'I'. |
| 46| APPEND jcds_tab. |
| 47| ENDLOOP. |
| 48|* Änderungen zu Einzelstatus (Update) |
| 49| LOOP AT jest_upd WHERE chgkz = 'X'. |
| 50| CHECK jest_upd-chgnr > '000'. |
| 51| CLEAR jcds_tab. |
| 52| MOVE-CORRESPONDING jest_upd TO jcds_tab. |
| 53| MOVE-CORRESPONDING chdat TO jcds_tab. |
| 54| jcds_tab-chind = 'U'. |
| 55| APPEND jcds_tab. |
| 56| ENDLOOP. |
| 57|* Verbuchung Statusobjekte |
| 58| DESCRIBE TABLE jsto_ins LINES sy-tabix. |
| 59| IF sy-tabix > 0. |
|>>>>>| INSERT jsto CLIENT SPECIFIED |
| 61| FROM TABLE jsto_ins. |
| 62| ENDIF. |
| 63| DESCRIBE TABLE jsto_upd LINES sy-tabix. |
| 64| IF sy-tabix > 0. |
| 65| field-symbols <fs_jsto_line> like jsto_upd. |
| 66| loop at jsto_upd assigning <fs_jsto_line>. |
| 67| IF <fs_jsto_line>-chgnr = '000'. |
| 68| <fs_jsto_line>-chgnr = '999'. |
| 69| ENDIF. |
| 70|* on change of status profile delete user status related to old profile |
| 71| IF <fs_jsto_line>-STSMA NE <fs_jsto_line>-STSMA_OLD. |
| 72| DELETE FROM JEST CLIENT SPECIFIED WHERE |
| 73| MANDT = <fs_jsto_line>-MANDT AND |
| 74| OBJNR = <fs_jsto_line>-OBJNR AND |
| 75| STAT LIKE 'E%'. |
| 76| DELETE FROM JCDS CLIENT SPECIFIED WHERE |
| 77| MANDT = <fs_jsto_line>-MANDT AND |
| 78| OBJNR = <fs_jsto_line>-OBJNR AND |
| 79| STAT LIKE 'E%'. |i tried with out using commmit but it is not creating Status.
When i see the function module help and they are trying to COMMIT
FU STATUS_OBJECT_CREATE
Short Text
Create Status Object
Functionality
The function module generates a status object.
Take the object number from the object number management (function modules OBJECT_NUMNBER_GET_xx).
If no object number is given, the module takes a temporary object number that must be replaced later (function module STATUS_OBJECT_SWITCH_NUMBER).
Example
Creating an internal order with number 100123 (object type "ORC") for status profile "STATSCHEM" with final object number
call function 'OBJECT_NUMBER_GET_OR'
exporting
aufnr = '100123'
importing objnr = objektnummer.
call function 'STATUS_OBJECT_CREATE'
exporting
objnr = objektnummer
obtyp = 'ORC'
stsma = 'STATSCHEM'.
commit work.
Creating the same order with a temporary object number
data: objectkey like ionra.
* TBO00-REFSTRUCT for object type 'OR' is 'IONRA'
objectkey-aufnr = '100123'.
call function 'STATUS_OBJECT_CREATE'
exporting
i_objectkey = objectkey
obtyp = 'ORC'
stsma = 'STATSCHEM'.
importing
objnr = objektnummer.
call function 'OBJECT_NUMBER_GET_OR'
exporting
aufnr = '100123'
importing objnr = objektnummer_neu.
call function 'STATUS_OBJECT_SWITCH_NUMBER'
exporting
objnr_old = objektnummer
objnr_new = objektnummer_neu.
commit work.
Notes -
How to create a secondary list of alv grid inside the function module
Hi All,
My requirement is to create a RFC function module to display the alv grid of one table.
i have created that.
while clicking on the records of the alv it should open the secondary list of another table.
My problem is it is not fetching the records of the internal table of the primary list since it is created inside the function module(FUNCTION...ENDFUNCTION).
pls help me on this.
Thanks in Advance.hi,
READ TABLE sel_sheet INTO wa_sheet INDEX rs_selfield-tabindex.
here sel_sheet is the internal table for the primary list..
i called the function module "reuse_lav_grid_display" inside Function...Endfunction.
so when i am using READ TABLE sel_sheet INTO wa_sheet INDEX rs_selfield-tabindex.
inside the user command perform therecords in this internal table is not populating..
pls help me on this.
thanks in advance. -
Error while using the function module..pack_handling_unit_dlvry
Hi all...
while using the function module pack_handling_unit_dlvry,
we need to pass the handling unit number as per the functionality we require.
but the mandatory field for the function module is the handling unit number in the form of bar code..
so how to use this function module..
All the useful answers will be regarded..
Regards,
Saroja.Have you tried using BAPI BAPI_HU_CREATE. Also view Function Module Documentation on its usage.
-
Error while executing the function module BAPI_RE_CN_CREATE
Dear All
I was using the the function module BAPI_RE_CN_CREATE. When I am trying to execute the function module I am getting the error message u201CBusiness transaction RECN doest existu201D. While inputting the parameters for the function module I have given RECN In the input field TRANS. Requesting you to please kindly suggest.
Regards.
VaraprasadHi Varaprasad,
please try the following.
1. Create a contract manually in the system
2. Use BAPI_RE_CN_GET_DETAIL to show how the fields and structures are filled.
3. Check and change the parameters for BAPI_RE_CN_CREATE accordingly.
Hope that helps.
Regards, Franz -
Error while activating the function module
hi,
am getting error while activating the function module i.e. program or report statement is missing.
thank you in advance
karthikhii vinu,
hi there....
make sure that the Processing type in Attributes tab is 'Normal function module'. Also chk the general data, it must be having some name in the Program Name and include name column.try checking the program names in se38, if the program is of type include or not. you can also chk by writting a program call the function module and test it
I hope this will solve the query. in my case, SAPLZ123 is the program name and LZ123U28 is the include name.
or
Its common prob with Function module.
Goto SE80->Give Function group name->Right click on it->Activate.
regards,
Shweta
Maybe you are looking for
-
Is there a feasible way to use effects from photo booth in imovie? I would like to have the background-effect and use my isight-camera. There is no effect to choose. Unfortunately the quality is too bad if I record directly from photo booth. I did no
-
I plugged my Iphone into the computer to put my pics on the computer. It went strait to itunes an erased all my contacts and pictures and replaced them with my husbands contacts and photos. Can i get the contacts and photos back?
-
Can any body help in data scheduling issue I am able to load data manually the issue is i selected some of the datafields in InfoPackage data selection field and saved . i put this Ip in the process chain.now the issue is i don't to load data immed
-
Load and syc Palm Z22 with Windows Vista 64
I have an HP, Windows Vista 64 desktop. I have a Palm z22 PDA. When I load the installation disk I get the following error - "Error 0x80040702, Failed to Load, DLL HSAPI, set up will terminate." I can't load the disk so I can't even get to the inst
-
Having a very hard time dragging my sequence into an Encore timeline
Hello, here is a screenshot, which I discuss further down this post: I'm having a heck of a time trying to import the "MASTER SATURDAY" sequence down into my timeline. Dragging and dropping does not work, neither does right clicking on it and select