Purpose of Virtual Receiver in XI?

Hi !!
When do we use a virtual receiver and what is the concept behind it ?
Likewise, "Sender uses virtual receiver" in Sender agreement..
Thnx,
Laawanya

Hi,
In the sender agreement, you define how the message is to be transformed so that it can be processed by the Integration Engine.
You must at least specify the party or service and the interface on the sender side for both the sender and receiver.
You can use a wildcard character (*) for the receiver party, receiver service, and the sender interface (see: Generic/Specific Definition of Configuration Objects).
Note that you are not permitted to use wildcard characters if the sender agreement is assigned a communication channel with the adapter type JMS, JDBC, or File.
Therefore, in the default setting, the receiver (party and service) is not specified during creation and the corresponding input fields are hidden in the create dialog box.
Now To specify specific values for the receiver, select the Sender Uses Virtual Receiver checkbox (see also: Configuring Cross-Company Processes).
http://help.sap.com/saphelp_nw04/helpdata/en/b1/f29e7a56e18a439984a3c6630951d2/frameset.htm
Thanks
Swarup
Edited by: Swarup Sawant on Mar 28, 2008 6:06 AM

Similar Messages

Sender uses Virtual receiver

Dear All,
I can find Sender uses Virtual receiver check box on both sender Agreement and receiver Determination.can you explain for what purpose and situation we should use this.
Thanks

Check "Sender uses Virtual Receiver"...What it is? .
Regards,
Sunil Chandra

About Receiver Aggrement in Virtual receiver

When we are creating the Receiver aggrement then one check box is there that is Sender uses a virtual receiver, what is the purpose of that one and when we can use that one ?

Hi,
In Receiver Agreement you will not find this option .It will be available in Sender Agreement.
With Sender agreement you should select minimum sender Interface and the party or service for sender and receiver, For Receiver side details such as party/service and the sender interface could be replace by * (wildcard character). This will make the generic Sender agreement.
In case of fixed receiver for the given sender you could virtually map the sender interface with receiver details.
This could be possible with using Virtual receiver.
Normally this is used to Configuring Cross-Company Processes .
Thanks
Swarup

Regd. error in sender agreement(when to check sender uses virtual receiver)

hi Experts,
I am doing a file( SFTP adapter ) to IDOC scenario.
I got an error :
Couldn't retrieve inbound binding for the given P/S/A values:FP=XYZ;TP=;FS=XXXX;TS=XXXX;AN=XXXXXX;ANS=;
I checked my sender agreement and saw some "*" symbol displayed at the end on SA name.
To quick fix it and remove the star symbol'', i have just created SAgreement again and this time i checked "Sender uses virtual receiver " and revomved thestar symbol '' and saved without mentioning anything there.
When i tested it worked! but i want to know what made it work, is it the right practice.
i did a lilttle search on when to use "sender uses virtual receiver" option.i came to an understanding that it is mainly used to handle multiple input file formats in a single configuration scenario.
one more qns:
What are marketplace adapters,is this error comes when we use adapters which are not inbuilt or bought from external vender.
Regards,
Anika
Edited by: Anika Gulati on Jun 10, 2009 1:23 PM

Here are few ways for it...
SAP Process Integration: When to Use u201CSender Uses Virtual Receiveru201D in a Sender Agreement
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40cb67f7-6464-2b10-bcb9-8edb9a3569f9
SAP Network Blog: Virtual Receiver - Why do you 'really' need it?
/people/shabarish.vijayakumar/blog/2008/09/16/virtual-receiver--why-do-you-really-need-it
-SM

Sender Uses Virtual Receiver - Receiver Determination & Sender Agreement

Hello all,
There is a Checkbox with Sender Uses Virtual Receiver while creating Receiver Determination & Sender Agreement.Could anyone tell when one shall use that checkbox & diffrence of using the same in Rx Determination & Sender agreement ? And Lastly What is the significance of using * in Party &
Service in that Sender Uses Virtual Receiver part ?

Hi,
we will use it when we are using B2B scenario......
More details... please check this.............
/people/shabarish.vijayakumar/blog/2008/09/16/virtual-receiver--why-do-you-really-need-it
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/virtual%252breceiver%252buse%252bin%252breceiver%252bdetermination%252bb2b(Idoc%252bto%252b(File%252cIdoc%252bor%252bany%252bother%252bsystem))
http://help.sap.com/saphelp_nw04/helpdata/en/b1/f29e7a56e18a439984a3c6630951d2/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/26/5ccd3bb4560f01e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nwpi711/helpdata/en/48/ce2a423a8e5430e10000000a42189b/content.htm
Thanks

"Sender uses Virtual Receiver"...What it is?

Hey Guys,
In Sender Agreement, we have an option of selecting Sender uses virtual receiver option.I tried finding out wht "Sender uses virtual receiver" is all about all i could find out is....this option is used when we have parties communicating that do not know the entire system landscape...
Can u plz add to it???
Many Thanks,
Pritish

Hi Pritish,
Please go through these links and se if it helps.....
http://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/how-to%20guides%20-%20rig%20official/xi/how%20to%20set%20up%20an%20xi%20integration%20directory%20scenario%20with%20party%20to%20support%20edi%20partner%20processing.pdf
/people/shabarish.vijayakumar/blog/2006/09/08/b2b-and-the-hype-about-the-party
/people/james.guanzon/blog/2006/09/09/how-to-support-industry-standards-in-xi-part-iii-of-iii--config-test
Regards,
Abhy

Sender Agreement - Virtual Receiver - what is it for?

Hi guys!
When u create Sender agreement - what is Virtual receiver good for? What is the difference when u use it and not?
Thank you for answer!
Olian

Hi ! Olian
For more Information about Sender Agreement - Virtual Receiver -
refer these below links .....
the following link has something regarding Virtual receiver, check this one.
virtual receiver???
configure virtual receiver in cross system
If you want to create a receiver-dependent receiver determination, select the Sender Uses Virtual Receiver checkbox in the create dialog.
Check out this Rec Det steps.
http://help.sap.com/saphelp_nw04/helpdata/en/26/5ccd3bb4560f01e10000000a11402f/frameset.htm
Also u can chk out this blog where he hav shown the screen shot.
/people/james.guanzon/blog/2006/09/09/how-to-support-industry-standards-in-xi-part-iii-of-iii--config-test
Also, http://help.sap.com/saphelp_nw70/helpdata/en/b1/f29e7a56e18a439984a3c6630951d2/frameset.htm
/people/michal.krawczyk2/blog/2005/11/21/xi-idoc-to-idoc-tunneling--how-fast-and-easy-can-you-get
http://help.sap.com/saphelp_nw04/helpdata/en/26/5ccd3bb4560f01e10000000a11402f/content.htm
o enter specific values for the receiver, select the checkbox Sender Uses Virtual Receiver
http://help.sap.com/saphelp_nw2004s/helpdata/en/da/7a2f41b239a831e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/b1/f29e7a56e18a439984a3c6630951d2/frameset.htm
you want to create a receiver-dependent receiver determination, select the Sender Uses Virtual Receiver checkbox in the create dialog.
Check out this Rec Det steps.
http://help.sap.com/saphelp_nw04/helpdata/en/26/5ccd3bb4560f01e10000000a11402f/frameset.htm
Also u can chk out this blog where he hav shown the screen shot.
/people/james.guanzon/blog/2006/09/09/how-to-support-industry-standards-in-xi-part-iii-of-iii--config-test
Also, http://help.sap.com/saphelp_nw70/helpdata/en/b1/f29e7a56e18a439984a3c6630951d2/frameset.htm
A real world scenario
/people/william.li/blog/2006/09/08/how-to-send-any-data-even-binary-through-xi-without-using-the-integration-repository
http://help.sap.com/saphelp_nw04/helpdata/en/b1/f29e7a56e18a439984a3c6630951d2/frameset.htm
Questions are welcome here!!
Also mark helpful answers by rewarding points 
Thanks,
Abhishek Agrahari

Virtual Receiver

Hi All,
Could you tell me why we use Virtual receiver in Sender Aggrement and Receiver Deteremination.
also in which scenarios do we use it:
Case1: Sender is Party
and receiver is Service without party
Case2:
Sender is Service without party
and reciever is Party
Pls advice...
XIer

good explanation
http://help.sap.com/saphelp_nw04/helpdata/en/ca/efb540efe68631e10000000a1550b0/content.htm
SAP HELP>>
Receiver-Dependent Routing
You can define receiver determinations as receiver-dependent.
You can use this property when configuring cross-company processes where not all communication parties know the entire system landscape description. In this case, you can release an external view of your system landscape for your communication parties. Your communication party then knows the externally released virtual receiver to which he can send his messages. By defining one receiver determination that is dependent on a virtual receiver, you can define the internal receiver system to which the message is to be forwarded.
If you want to create a receiver-dependent receiver determination, select the Sender Uses Virtual Receiver checkbox in the create dialog.The system then displays the input fields for the receiver (party, service).

As per the excerpts it can be used for both receivers (service and party)
regards
Pratibha
**correct me if i am wrong

Purpose of Enhanced Receiver Determination

Hi
i go thrown the some sap help link .. But I did't understand.. so, can any of you plz explain the what is the purpose of the Enhanced Receiver determination..
for this.. in mapping side does we need to do any special things.. or for a normal scenario also.. can we use this..
I want to use this Enhanced Recever determination in my scenario.. for that what are the steps i need to follow..
Regards
Babu

Hi !
Enhanced Receiver Determination:
You use an enhanced receiver determination to have a mapping program determine the receivers of the message dynamically at runtime. Instead of creating the receivers in the receiver determination manually, you assign a mapping to the receiver determination and this returns a list of receivers at runtime.
http://help.sap.com/saphelp_nw04/helpdata/en/43/a5f2066340332de10000000a11466f/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/42/ed364cf8593eebe10000000a1553f7/frameset.htm
/people/venkataramanan.parameswaran/blog/2006/03/17/illustration-of-enhanced-receiver-determination--sp16
also check this
Please Check
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
/people/venkataramanan.parameswaran/blog/2006/03/17/illustration-of-enhanced-receiver-determination--sp16
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/a5f2066340332de10000000a11466f/frameset.htm
/people/shabarish.vijayakumar/blog/2006/06/07/customise-your-xpath-expressions-in-receiver-determination
http://help.sap.com/saphelp_nw04/helpdata/en/42/ed364cf8593eebe10000000a1553f7/frameset.htm
/people/venkataramanan.parameswaran/blog/2006/03/17/illustration-of-enhanced-receiver-determination--sp16
Also check ....
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/a5f2066340332de10000000a11466f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/42/ed364cf8593eebe10000000a1553f7/frameset.htm -
>Enhanced Interface determination.
/people/shabarish.vijayakumar/blog/2006/06/07/customise-your-xpath-expressions-in-receiver-determination --->Customised XPath
Also check the following threads
Enhanced Receiver Determination
Enhanced Receiver Determination synchronous
/people/robin.schroeder/blog/2006/11/15/using-dynamic-receiver-determination-with-sync-interface
/people/venkataramanan.parameswaran/blog/2006/03/17/illustration-of-enhanced-receiver-determination--sp16
List of receivers can be dyamically determined and assigned at runtime using enhanced receiver determination .
have alook at thses URl's also
http://help.sap.com/saphelp_nw04/helpdata/en/43/01322a7af25285e10000000a1553f7/frameset.htm
:Dynamic file and variable substitution
Similarly Extended Receiver determination is used to determine the receiver at runtime.
Refer my reply:Re: Condition In Receiver Determination Not Working
enhancement in ID
Enhanced Receiver Determination:
You use an enhanced receiver determination to have a mapping program determine the receivers of the message dynamically at runtime. Instead of creating the receivers in the receiver determination manually, you assign a mapping to the receiver determination and this returns a list of receivers at runtime.
http://help.sap.com/saphelp_nw04/helpdata/en/43/a5f2066340332de10000000a11466f/content.htm
Enhanced (Mapping-Based) Interface Determination
In an enhanced interface determination you do not enter the inbound interfaces manually, but instead first select a multi-mapping. You get the inbound interfaces from the target interfaces of the multi-mapping. The inbound interfaces are determined at runtime during the mapping step.
You typically use an enhanced interface determination if the source message has an element with occurrence 0 ... unbounded (for multiple items of a data record) and you want multiple messages (for the individual items) to be generated at runtime.
http://help.sap.com/saphelp_nw04/helpdata/en/42/ed364cf8593eebe10000000a1553f7/frameset.htm
Thanks

SAP-Xi --configuration: purpose is to receive Idoc in XI from SAPR3

Hi all,
Please provide information how to configure SAPR3 and XI systems to post an Idoc and receive and Idoc.
sender: Receiver
SAPR/3--->posts Idoc -
> XI receives Idoc
Please provide the configuration steps in detail. As i am new to Xi, Please help me to configure the same.
Thanx A Ton In Advance.
Bye all....

Hi Ajay,
Requirements in R3 system:
1. Create RFC destination pointing to XI in SM59
2. Create port for XI using we21
3. create Outbound Entry in partner Profile for XI in we20.
Requirements in XI system:
1. Create Technical System pointing to the R3 system.
2. create Business System pointing to the R3 system.
If you want to send IIDOC out of XI,
1. SM59 - Create RFC destination
2. IDX1 - Create port
3. IDX2 - Import Metadata.
Note:u dont need a IDOC sender adapter or a Sender Agreement to sent a IDOC to XI.
Check dis link for more info:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660
Cheers,
Prasanthi.

Slow down speed for testing purpose between virtual machine in hosted in Hyper-v

Hello All,
I have searched and could not find thread related to this .
There is a scenario to test: the network speed between virtual machine [client and server ] must be really slow to check the application behavior on connecting to server.
Please advise . thanks in advance

Hi
Thanks for the reply . I am using
Virtual machine manager console .
right click on the virtual machine, i see network adaptar in Hardware Configuration and there no option to choose speed in any of the option.
Please guide me if i am wrong

IDOC packaging/No packaging - need either/or depending on receiver

Hello IDOC adapter gurus,
We have an existing scenario with IDOC packaging, in which the message goes to multiple receivers . The client wants to OMIT idoc packaging for a single one of the receivers. Since the packaging is done in the sender adapter, how can I accomplish this in XI? A separate Partner Profile is already set up for this receiver in the sending system, so that side is not a problem.
One idea I'm exploring would be to create a new sender comm channel without packaging and a new Sender Agreement with Virtual Receiver and select the receiver in question, however I can't find enough documentation on the VR feature. Would that work? Any other ideas?
Thanks in advance.
Carlos

>
Carlos Herrera wrote:
> Hi Ravikanth,
>
> Yes, I intend to do that, but the question is, will that be enough since it will still go through the comm channel that has idoc packaging configured? In other words, will the comm channel package size act as a "max size" or "min size"?
>
> Thanks.
> Carlos
if it is configured to be not do the collect at the partner profile end, you dont have to worry.
the IDoc adapter will not do any collect even if the package size is set.

Can I use Oracle Developer Day.ova for learning purposes without any license? #developerday

Hi,
 I am a student and learning oracle database. I have found Oracle Virtual box appliance from following link Developer Day - Hands-on Database Application Development</title><meta name="Title" content="Dev…
 Do I need a license to use this VM?
 Please reply.
Thanks,
Tahir.

Kunwar wrote:
Hi friends,
i have installed oracle db using Oracle Developer Day.ova for practicing on my lappie.
I want to connect to that DB which is inside oracle vm virtual box manager using PUTTY ( which is on my desktop). I dont want to use the in-built workspace or Terminal(whatever is its name).
Can you guys please suggest what should i do so that i can login to the DB using the PUTTY only (i love it )? i am not able to login to the host "localhost" using the putty.
Few years back when i had installed vmware(linux installed in it and db installed on linux) i could connect through putty.
I am using below entry in the hosts file.
# localhost name resolution is handled within DNS itself.
 127.0.0.1 localhost
# ::1 localhost
'localhost' and its ip address of 127.0.0.1 are non-routeable. Any request to send a network message to localhost will never leave the machine from which the request originates. And for all intents and purposes, your virtual machine is a different machine.
See my solution at
http://edstevensdba.wordpress.com/2012/12/15/configure-the-virtualbox-network-2/

BI Statistics NW2004S Content - Virtual Info Provider 0TCT_VC01

Hi
We implemented BI NW2004S statistics for front end OLAP analysis which consists of info providers 0TCT_C01, 0TCT_C02. However, when we activated the queries, we are not seeing enough data in queries even though the info providers are loaded correctly. SAP has provided content for 0TCT_VC01 & 02 as virtual info providers which are used in multi providers -0TCT_M01 & M02 along with the base info providers mentioned above. All content queries are built on these multi providers and currently in our multi provider we have just base info providers but not virtual info providers.
Now my question is, on virtual info providers - These virtual info providers are based on DTP and am just wondering which data source I should use to maintain transformation as info provider based on DTP would require transformations to load the cube. I have used data sources 0TCT_DS01 & 02 to map transformations to base info providers 0TCT_C01 & C02 respectively.
Pls confirm on how I should use these virtual info providers as part of multi providers and which data source should I use to maintain transformation.
I am hoping that by including virtual info providers into the above multi providers, I would be able to see the data to analyze query performance during user navigations.
Appreciate your response.
Thanks

RSDDSTAT_OLAP->0TCT_DS01(data source)->InfoPackage->0TCT_C01(0TCT_MC01)->0TCT_MC01_Q*(queries)
The cube 0TCT_C01 gets filled from data source 0TCT_DS01 which is again gets data from the view RSDDSTAT_OLAP.
So whenever you run queries (3.x or 7.0) or templates (3.x or 7.0) or workbook (3.x or 7.0), this view gets filled.
So, you please schedule the releavant process chain or infopackage which will fill the cube 0TCT_DS01, then you will be able to use the queries built on this cube.These process chains are starting with 0TCT*.The installation steps and scheduling steps are very well explained in the note 934848.
P.S. SAP delivered queries are based on multicube 0TCT_MC01 (built on 0TCT_C01 and 0TCT_VC01) and not on 0TCT_C01
0TCT_VC01 Usage -
The purpose of virtual cube 0TCT_VC01 is to give delta data.
For ex, you would've scheduled the process chain for loading 0TCT_C01 every day in the mid-night. If you are running the query built on 0TCT_MC01 cube in the morning, you will miss the data from yesterday mid-night till today morning. To give this delta data, the virtul cube is used in the multi cube.
Hope it Helps
Chetan
@CP..

Virtual chars/key figs

Hi BW gurus--
Let me know the Purpose of Virtual chars and key figs.
also how to handle and how to create the same.
Regards,
Rambo.

Hi Rambo,
virual chars/key figs are normally created infoobjects. They will be added to a provider, but there is no value posted to them in the provider. They will stay initial. In the relevant user exit (enhancement rsr000001) you have to implement the coding to populate the values during runtime of your query.
You can use them
a) to show movements without having any data posted to your provider (e.g. you can set a flag identifying a sales order for 'in time', 'due' or 'late' if you compare the run date of the query with the desired delivery date of the customer. Of course for order without having the status 'delivered'.)
b) to create flexible classifications (e.g. sales orders amounts: 0 - 100 = class A, 101 - 1000 = class B.... if you want to change the classification based on the amounts you have to use virtual infoobjects)
Hope this helps!
regards
Siggi

Purpose of Virtual Receiver in XI?

Similar Messages

Maybe you are looking for