Pus the power button only the fan go on ENVY 23 Touchsmart

Wnem I pus the power button only the fan gos on and the back power light is on and it go off only I unplug the power cord. The computer don't turn on. I tryed to unplug and pus the power button for 10 sec, but the nothing. Somebode can tell me what is can be/Thanks

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how your computer fan goes on, but the rest of the computer will not turn on. I would be happy to assist you in this matter! To correct this issue, I recommend following the steps in this document on Screen is Blank after Starting the Computer. This should help to fully power on your desktop computer, and restore the video signal to the display screen. If the issue continues, please contact our technical support for further assistance in this matter by clicking the link below to get the support number for your region.
www.hp.com/contacthp/
I hope this helps!
Regards

Similar Messages

My ipod wont turn on i already read about holding the power button and the home button the only thing is my home button is not working so what can i do

my ipod wont turn on, its a ipod 5th gen- I turned off my ipod and then when I went to check it later it wont turn on this is the second time it happened, I tried to charge it its not recognizing it, I have heard that you can try to press the power button and the homebutton to make it work, when it happened the first time I did that and it worked but since my home button isn't working what can I do, can I try to fix it or do I have to go to apple and ask, can anyone help me plz

Hello, pravin729.
Thank you for visiting Apple Support Communities.
I understand that your iPod touch will not turn on. I would start with going through the troubleshooting steps in the article below.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on
http://support.apple.com/en-us/HT201412
Cheers,
Jason H.

I came home and attempted to power on my iPad2. I can see the backlight but nothing on the screen. When I try to reset by pushing the off button and the power button at the same time I can sometimes see the characters briefly but the screen has lines and

I came home and attempted to power on my iPad2. I can see the backlight but nothing on the screen. When I try to reset by pushing the off button and the power button at the same time I can sometimes see the characters briefly but the screen has lines. Can someone tell me if there is anything else I can do before a trip to the repair shop?
Will

If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

IPhone 4s looks shut down all the time.especially when the 3g is on.in the forums its said to push the use button and the power button at the same time.the people calling me cannot reach at my phone.what should i do ?

my phone looks like offline all the time.its all about me to notice that its offline.then i have to push the main button and the power button together to open it.then the apple sign comes on the screen and the phone turns online.but i cannot receive the information of who called me at the time that my iphone 4s turned offline by itself.i cannot receive messages at all.what can i do now ? i sent the phone to the service and they just told me that they installed the current version.but i guess nothing happened.its doing the same thing again.i cannot use my iphone.
From Turkiye.

I've tried all those.But nothing works.The phone seems to be shut down.But it is not.When i get it out of my pocket, for example to call someone, i touch to main button but nothing happens.I solve it by pushing the power button and the main button together just for a couple of seconds, as its said so in the forums.
also, people told me that they were calling me, my phone was ringing but i didnt answer?...i checked it for millions of times, it seems to be shut down, but its normally not.then i push the buttons together and the apple sign comes on the screen.it searches for the network.and it works.
but i do not see any calls, texts anything.but for the others, they say my phone seems to be workin.
I thought it was 'cause of the 3G is switched on but when I turn 3G off, it does the same thing.it seems to be offline all the time.

I have an iBook g4 14" 1.42 ghz. I recently installed a new hard drive. I put the install CD in. Then, I pressed the power button, then the "C" key. Black screen and No chiming. Please tell me, what I can do to resolve this? What is the problem with it?

I have an iBook g4 14" 1.42 ghz. I recently installed a new hard drive. I put the install CD in. Then, I pressed the power button, then the "C" key. Black screen and No chiming. Please tell me, what I can do to resolve this? What is the problem with it?

Since it will not boot then a hardware test can't be run. You could try FireWire Target Disk Mode and if it works then access from another Mac to run tests on the new drive. You could also try installing the OS X software from the host computer. If this does not work then professional help should be considered.
http://support.apple.com/kb/ht1661
http://osxdaily.com/2010/04/07/how-to-boot-a-mac-in-target-disk-mode/
http://www.macobserver.com/tmo/answers/how-to-use-target-disk-mode-to-boot-from- another-macs-hard-drive

HT4623 i was doing a software update downloading ios 6.1 and the phone froze half way through the download i tried to restart the phone by pressing the power button and the home button but its just a apple on the screen. what can i do to fix this??

i was doing a software update downloading ios 6.1 and the phone froze half way through the download i tried to restart the phone by pressing the power button and the home button but its just a apple on the screen. what can i do to fix this??

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps..
But... if the Device has been Modified... this will Not necessarily work.

I cannot put my iMac to sleep using the power button since the Mavericks upgrade.

As the title states, I can no longer put my computer to sleep using the power button. I have to put it to sleep using the mouse. I miss the convenience of the power button. The window for energy saver is not like the display in support, it is missing the "Allow the power button to put the computer to sleep" option. Very strange. I am running an older desktop (2009) with Mavericks, fully updated. 10.9.4

A workaround is to setup a keystroke in the System/Keyboard/Shortcuts preference pane to sleep the Mac. Any function key or key combination will work.

My macbook froze and i pressed the power button and the OSX utilities appeared

My macbook froze and i pressed the power button and the OSX utilities appeared .. i don't know if my things got erased or what does it mean and what should i do ? it doesn't let me click out of it or anything. the options are to restore fro time machine, reinstall OSX get help online and disk utility ,, how can i do to not erase anything i do not have an external memory or anything. PLEASE HELP

Hi there. If you have 10.9 Maverick you can get in recovery mode By using /command r Option R or Option. Then you came click on the link to go to disk utilities and repair your disk or do a reinstall of you operating system. I think the screen you are seeing is the recovery screen. Here is a hot of what it looks like. You will have to scroll down a little to see it.http://osxdaily.com/2013/11/05/downgrade-from-os-x-mavericks/ http://support.apple.com/en-us/HT4718 This link tells you what you can do.

If the power button on the top of the phone stops working and sounds loose is that covered and can be fixed/replaced?

If the power button on the top of the phone stops working and it sounds loose is that covered and can be fixed/replaced?

Fix an appointment at the Genius bar for evaluation and possible replacement.

My iphone blanked out and will not cut on i tried holding the power button and the home button any advice?

my iphone blanked out and will not cut on i tried holding the power button and the home button any advice?

Hey there mello12,
It sounds like you are not able to turn on your phone. You should use these steps in the following article to help resolve it, or setup service if needed:
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
Thank you for using Apple Support Communities.
Take care,
Sterling

The power button on the top of my iPhone 5 is very difficult to turn on and requires an inordinate amount of pressure. Any suggestions for a solution?

The power button on the top of my iPhone 5 is very difficult to turn on and requires an inordinate amount of pressure. Any suggestions for a solution?

Check this website to see if your device is eligible for this program: https://www.apple.com/ca/support/iphone5-sleepwakebutton/

HT4623 So just like last time I tried to update my iPhone software...MY PHONE IS FROZEN. Displaying iTunes icon and a USB cable I pressed the Power button and the menu botton together until the apple icon appeared held them down for 10 secs & NOTHING No

So just like last time I tried to update my iPhone software...MY PHONE IS FROZEN. Displaying iTunes icon and a USB cable I pressed the Power button and the menu botton together until the apple icon appeared held them down for 10 secs & NOTHING Now what? Do I just wait for the battery to run out?

Hi Careesa,
Your iPhone is in recovery mode-- you need to connect it to your computer and, most likely, iTunes will ask you to restore it. If you recently backed up this shouldn't be too much of a problem.

My A859 displays "Have been in meta mode, long press the power button and the normal boot"

Hi,
I charged my phone until 100%. Within 4 hours, the battery showed 1% and shut down automatically. Then, when I tried to switch on it displays "Have been in meta mode, long press the power button and the normal boot". I thought that the battery is running out, so i charged half an hour. When I tried to switch on, the screen is blinking with light but no display. Now i cannot switch on my A859.
Anyone can help me on this? i just bought this phone few days before :'(
Solved!
Go to Solution.

Hi
Have you updated the phone in this time?Did you root it?
You should reinstall the OS.HERE you have the official ROW(Rest of the World) international firmware(You can OTA update to the latest version,if any, after)
HERE you have the installation instructions.
Pay special attention to the SP drivers>See message 7 of http://forums.lenovo.com/t5/Lenovo-Phones/Lenove-S650-sound-issue/m-p/1413747#M3660 ( the topic refers to a different model but the installation process is the same for all Lenovo powered phones).
Let me know how it goes.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

My iPod touch 5th Gen. wont start up past the apple logo,ive tried holding the power button and the home button,and it wont start up. What do I do?!?!

My iPod touch 5th Gen. wont start up past the apple logo,ive tried holding the power button and the home button,and it wont start up. What do I do?!?!

Try the remaining items of:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I have turned off my iphone 5s but i got a blue screen when i tried to turn it on back, and i tried to press the power button with the home button but it wont work

i have turned off my iphone 5s but i got a blue screen when i tried to turn it on back, and i tried to press the power button with the home button but it wont work

fadijaber wrote:
i have turned off my iphone 5s but i got a blue screen when i tried to turn it on back,
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset > http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring > http://support.apple.com/kb/HT1414
If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step... Be sure to make an appointment first...

Pus the power button only the fan go on ENVY 23 Touchsmart

Similar Messages

Maybe you are looking for