Push accounts from ECC into CRM without sales organisation

Hi,
We have setuped middleware connection between CRM and ECC for accounts. In CRM we use enhanced organisation model. Accounts from ECC come into CRM with sales organisation data. Correct working...
But their are also accounts in ECC who don't have sales organisation maintained. How can we get those also in CRM.
With an initial load it doesn't work, with CRMM_BUPA_MAP neither. You don't even see anything in smw01, so ECC don't push anything to CRM.
Any advice? Thx!

Any ideas plz.
Thanks.

Similar Messages

  • Initial load of sales orders from R3 to CRM without statuses

    1) Some sales orders were uploaded into CRM without statuses in the headers or line items. 
    2) Some sales orders were uploaded without status, ship-to, sold-to, payer.....If I deleted them and use R3AR2, R3AR4 to upload each individual then no problem.
    Any ideas or suggestions?
    Thanks.

    Hi,
       Request load of adapter objects uses different extractor modules for extracting the data from external system to CRM. While your initial load of sales docs. will use a different extraction logic bases on the filter conditions specfied on trx.
    R3AC1
       There may be a problem in the extraction of data from the source system (don't know if you are using a R/3). Can you please de-register the R/3 (i suppose) outbound queue using trx.
    SMQS
    , and then debug the extraction (R/3 outbound) before the data is sent to CRM using FM
    CRS_SEND_TO_SERVER
       If this goes well, you may try debugging the mapper in CRM inbound and the validation module in CRM as a last resort. Also, please refer to trx.
    SMW01
    to see if the Bdocs are fully processed.
    Hope this helps...Reward if helpful.
    Regards,
    Sudipta.

  • Replicate sales orders from  ecc to crm

    Hi experts,
                        We are creating sales orders in ECC and want to replicate them into CRM. Can you please tell me the configuration steps required in the middleware to replicate the orders from ecc to crm.
    thanks in advance
    Andy

    Hi,
    To replicate ECC Sales Order to CRM Sales Order, you need to setup up the Data Exchange in both the systems. This means you have to configure the systems, then you need to do an initial data exchanges and then finally the delta exchange will happen in both the systems. You need to look at the configuration guides for a proper setup of the systems.
    You can search the forum for a detailed document with special focus on the integration points.
    Also have a look at the following SAP HELP link:
    http://help.sap.com/saphelp_sm40/helpdata/EN/3f/40623c046a9b67e10000000a11402f/frameset.htm
    Hope this helps.
    Thanks,
    Samantak.

  • Issue with Replication of Bank Account Numbers from ECC to CRM.

    Hi,
    I am trying to transfer business partners from ECC to CRM, I see errors in SMW01, stating that Bank Key is not valid for US, I have then performed the Initial load for DNL_CUST_BNKA to tranfer Bank Master Data, but again getting error but this time on BANK ACCOUNT NUMBER.  How do I transfer the BANK ACCOUNT NUMBER of Business Partners from ECC to CRM. Before starting the initial load for BUPA_MAIN do I need to run any other Initial load to move the BANK ACCOUNT NUMBERS to  CRM?
    I have already moved Bank Master data using DNL_CUST_BNKA, but can't able to replicate BANK ACCOUNT NUMBERS, can someone please provide me some steps which I need to perform to tranfer BANK ACCOUNT NUMBER.
    Now when I ran the initial load for BUPA_MAIN , all Business partners which do not have BANK ACCOUNT NUMBERS are replicated successfully but the one which have Bank Details did not got transferred and gave errors for BANK ACCOUNT NUMBER, Please provide some suggestions.
    Thanks.
    Jennifer

    Willie,
    Thanks for the reply:
    Error: BANK ACCOUNT NUMBER    ******8547 is not valid
    Support pack level:
    SAP_ABA  701  0003
    SAP_BASIS 701 0003
    BBPCRM   700  0002
    Thanks.
    Jennifer

  • Replication of CUSTOMER from ECC to CRM

    Hi CRM Guru
    Is that anyway to download the partner function (sold-to, ship-to, payer, bill-to, employee) in the customer sales area data from ECC to CRM (created as BP relationship in CRM) in the INITIAL LOAD?
    For example:
    Customer in ECC 100000000 have the partner function in the partner function tab under the sales area data
    SP Sold-to = 100000000
    SH Ship-to = 100000001
    PY Payer = 100000002
    BP Bill-to  =100000003
    And create those relationship in CRM under the Relationship area.
    Please advice.
    Thank you

    Hi.
    If what you are trying is to replicate the partner functions as relationships, first be sure that you have replicate the customer (the main and the others on partner functions sales areadata) using the middleware object CUSTOMER_MAIN.
    Then run the object CUSTOMER_REL for the main partner. This will result on the relationship creation at CRM side, representing the partner functions on R/3 site.
    Be aware that if in R/3, the main partner represents all the partner functions, when it is replicated into CRM, the system does note create a relationship to himself, but this not means that the partner can be used in sold to party, payer, ship to and bill to partner functions on documents.
    Regards.
    SM

  • Replication of partner function from ECC to CRM

    Hi experts,
    We are working on CRM 5.0 with back end ECC 6.0
    In our scenario we are creating sales orders in ECC and replicating it to CRM.
    Now the problem is we have a partner function created in ECC which is entered manually ( not through partner determination procedure) . We have also created the same partner function in CRM but we are not able to populate that partner function field automatically.
    Is there any way by which we can populate this ?
    Points will be rewarded for suitable solution.
    Regards,
    Madhu

    hi
    just mainatining partner function wont be enough ,you need to do two things
    1. mapping of BP function between CRM and ECC
    2. specify the path from ECC to CRM so that they can be replicated successfully
    so,IMG: Customer Relationship Management -> Basic Functions -> Partner Processing -> Data Transfer -> Distribution of Partner Functions from SAP ECC into CRM
    this is the path where in distribution you need to specify the path
    and maintain there the mapping between the R3 and CRM
    RFC destination should be CRM and source is ECC
    best regards
    ashish

  • How to transfer data from ECC to CRM via IDocs (Clfmas01),

    Hi all,
    how to transfer data from ECC to CRM via IDocs (Clfmas01), that to material master data from ECC to Production master data in CRM.    
    Need Information regarding, how to upload file to CRM from ECC, through, IDocs......Plz help me...
    Edited by: khaja fareed on Jan 11, 2010 12:44 PM

    First of all push ECC data in to GTS server through T.code:/N/SAPSLL/MENU_LEGALR3. First click on Master data tab there enter customer/vendor number then execute.
    2-Go to document tab there enter Sales order no/PO number then execute it.
    Then go to GTS server in compliance management module you can get all the information.
    Regards
    Sitanshu Panigrahi

  • Organization data from ECC to CRM

    Hi Experts,
    We need to download organization data from ECC to CRM, and our requirement is to download two different kinds of org structures, sales org structure and HR org structure. Could you please advise whether this is possible in the system and also if it is possible please advise how to download this.
    Currently we are using ALE to download employees into CRM and transporting org structure in CRM systems from golden client.
    Thanks&Regards,
    Kumar.

    Hi Kumar,
    Please select the following parameters when downloading the HR Org from CRM:
    You can do this  in the program RHALEINI (or in the transaction PFAL, which has the same function)
    Tx: SM30--> This scenario is activated in T77S0: ALE REPLI
    Objects:
    1. Plan Version: 01
    2. Object Type:  *
    3. Object Id: Copy the Object Ids which you want to transfer from HR System
    4. Object Status: *
    Reproting Period: All
    Structure Parmaters: Blank
    Transfer Mode:
    Insert: Complete distribution, this will delete the exisiting and recreate it in Target System
    Update: this will update the change records in CRM system
    Message Types: HRMD_ABA
    Also check SAP Note: 119780
    Hope this helps.
    Regards,
    Madde

  • Business partner(employee) is not replicated from ECC to CRM

    The Business partner Not replicated in CRM.Two Sales organization have been maintained for the employee for the different time lines in ECC.Checked the BDOCs and the validation error occur in FM CRM_BUPA_MAIN_VAL .The BDOCs message was saying the BPGUID was missing .Could anyone please suggest what could be the root cause of the data not replicated from ECC to CRM.

    Hi Pragnya,
    This is the case where at the time of creation of BP there was some issue with replication.
    The BP itself is not there in CRM or only the changes are not reflected?
    In such scenarios, perform following steps for successful replication:
    1. Go to TCode: CRMM_BUPA_MAP
    2. Enter the BP no. {initially it says it does not exist}
    3. Enter ERP customer no. and press enter, the BP GUID gets filled
    4. Click on "Gather Information about customer" [you can see the status of the object]
    5. Now again enter the BP no. -> The customer is available in CRM now.
    Regards,
    Swagi

  • Downloading Material Master data from ECC to CRM

    Hello friends, I am working in CRM 5.0., I am finding difficulty in downloading Material master created in ECC to a Product Master in CRM. Can you please tell me how to use Customizations to download the material master to product master.

    Hi Rghunandan,
    To carry out the product replication from ECC to CRM,you need to carry out the foll steps.
    First download the customizing objects using R3AS
    DNL_CUST_PROD0 u2013 Material number conversions
    DNL_CUST_PROD1 u2013 Product : Categories
    DNL_CUST_PROD3 u2013 Material : R/3 sales status
    DNL_CUST_SPROD u2013 Sales product item
    DNL_PLANT - Plant
    To download products foll the steps below
    1.Defining Product ID Settings  -COMCPRFORMAT
    Cross-Application Components  SAP Products  Basic Settings  Define Output Format and Storage Form of Product Ids
    This activity describes how to synchronize the product Ids in the CRM system and the R/3 system.
    The material master length is R/3 is defined in transaction code OMSL and is set to 18.  (also check note no. 545824)
    2.Make sure that CRM item categories and R/3 item categories are the same.
    In CRM, item categories and item category groups are seen via
    Customer Relationship Management  Transactions  Basic Settings
    3.Selecting specific objects for replication : R3AC1
    Use adapter object MATERIAL
    Use filter settings tab and specify the material or a range of products you want to download .Use atble name MARA,field MATNR use an approriate operator and mention theproduct you want to downlaod.
    4.Replicate Materials : R3AS
    mention the adaptor object Material and execute
    Regards
    Itty

  • Mapping of field from ECC to CRM - DChain-spec. status field

    Hello,
    In my current assignment we will be downloading all the master data from ECC to CRM. For a particular requirement, we need a field in COMMPR01 in CRM from material master MM03 in ECC.
    Field Location: MM03> sales:sales org1>DChain-spec. status
    Please find below technical infomation for that field ( ECC)
    Field Data:
    Table Name: MVKE
    Table category: Transparent table
    Field Name: VMSTA
    Data Element: VMSTA
    Field Description for Batch Input
    Screen Field: MVKE-VMSTA
    Program Name: SAPLMGMM
    Screen Number: 4000
    Please help me in locating the same field in CRM (COMMPR01)
    Regards,
    Vipul

    Hi Vipul
    Please implement note 1494159. This should doanload this field as well then.
    Best regards
    Christophe

  • BUPA_REL BDOC's from ECC to CRM  BP  Contact PersonRelationship DATES wrong

    Hello  SDN community,
    BUPA_REL BDOC's - from ECC to CRM  - BP Contact Person Relationship (BUR001)  -  Valid From & Valid To dates are not replicating correctly.
    Within ECC,
    when a Business Partner's Contact Person relationship (BUR001) is modified, such that one relationship is ended
    and the "Valid To" relationship is set to  todays date (ie. 20/01/2012).
    AND  then another Contact Person relationship is created for the BP, with a Valid From date  that is  set  to tomorrow  (ie. 21/01/2012) and
    the Valid To date is set to  31.12.9999.
    THEN  the BDOC processing occurring in CRM  is setting the relationship dates in CRM incorrectly.
    ie. The VALID FROM date is set to 01.01.01 and
    the VALID TO date is set  to 31.12.9999.
    Does anyone have any ideas/solution for this or a similar experience?
    Thanks in advance
    Andrew Clarkson

    Hi, Andrew Clarkson
    1630644 - No validity period in standard contact person relationship
    This is SAP standard behaviour
    Due to technical reasons, the partner function assignments are not time-dependent and the validity period of the contact person relationship cannot be considered by the automatic partner determination in the CRM applications. Therefore the maintenance of the start and end for the contact person relationship in CRM is deactivated in the standard system.
    A possible workaround is to use a customer-defined relationship category (copy of standard), which can be customized without any limitations.
    Regards,
    Denis

  • How to restrict contact person from ECC to CRM

    Dear All,
    We need customers to flow from ECC to CRM, but not Contact persons.
    Seems that the 2 adapters CUSTOMER_MAIN & CUSTOMER_REL have to have the same filter settings.
    How do we achieve this?
    Please help!!
    Best regards,
    Rohit L.

    Hi Rohit,
    In CRM table CRMC_BUT_CALL_FU you can add any function module you need to filter data as per your requirement... Have a look to this OSS note that will show you the trick:
    Note 638628 - No contact person upload into R/3: Example for exit users
    Regards,
    Nicolas
    PS: this OSS note is even better:
    Note 774662 - Enhancement of the business partner data exchanges
    Edited by: Nicolas BUSSON on Jun 4, 2009 10:13 AM

  • How to transfer Material Master data information from ECC to CRM

    Hi ,
      Changes to the Classification data of Material master for the class type-001 and Custom
    ZFIELDS on mara will trigger the Interface functionality. Any changes to the
    custom zfields and  classes or characteristic values on Material Master must transfer the information from ECC to CRM. By using RFC .
    Regards,
    Pavan

    Hi,
    You need to use change pointer to do this. Go to transaction SALE,
    expand MODELLING AND IMPLEMENTING...
    expand MASTER DATA DIST...
    expand REPLICATION OF MODIFIED DATA
    You may need to maintain distribution model in SALE.
    Cheers.
    Reward if useful

  • Replicating Quotation overall status from ECC to CRM

    Hi,
    we're using quotation management replication scenario A in ECC6 and CRM 5.
    when the quotation is referenced to sales order in ECC, the overall status becomes "completed" in ECC. but somehow, the overall status of the quotation in CRM remains "not processed".
    is there anyway i can get the overall status in ECC replicated to CRM for Quotation Management?
    Regards
    JD

    Hi Susana,
    i got reply from SAP mentioning that this is standard behavior. unless i replicate the referencing sales order document from ECC to CRM, then the CRM quotation system status won't be set to completed whenever it is referenced to sales order in ECC. we do not have any business need to have the sales order in CRM, but that's the way it is.
    Regards,
    JD

Maybe you are looking for

  • IMac not Connecting to Internet on Same Network MacBook Pro Can

    so, my imac decided to quit connecting the other day. it had shut itself down while i was gone (i usually have it on sleep mode in the office, using the laptop in the living room). a router connects the two to a cable modem. the connection, hardware,

  • Resultset next() return true even there's not record

    Here's the code: public Object getColumn(String s) throws SQLException { Object o = null; ResultSet r = db.select(s); // a db rpocess return a resulset int Columns = r.getMetaData().getColumnCount(); if (Columns == 1) { Vector v = new Vector(); while

  • Adobe Photoshop Elements 12.1 update

    I just downloaded the latest version of Photoshop elements last evening 5/2/2014. I got a message saying I had an update. I did the update and got an error code U44M1P2001 after update to Photoshop Elements 12.1. I can't find where to try the update

  • Hardware error, random squares, rectangles

    Hi everyone. I just bough a 17" Macbook Pro (< 1 month), and a couple of times during the last week the monitor displayed some strange random squares and rectangles. For example, when scrolling down in the Firefox window, the squares looked like they

  • Low Memory Error (Computer also reporting that my hard drive is almost filled)

    Is there a diagnostic tool or something else I can do to find out why I'm getting an low memory error? I have a Compaq Presario CQ60. I have 4.0GB of RAM and a 2.0 GHZ processor.  I only have 5GB left on my hard drive. That can't be right!  The drive