Push button not active in sales order Display trasaction

Hello,
I added a push button to sales order item -> additional data B tab. The push button is INACTIVE when i see via VA03 transaction where as ACTIVE if i see via VA02 transaction.
My requirement is that i have to make it active VA03 Transactions also.
How can i do that?. Please help me in this regard.
Thank You,
Naresh.

Hello,
I could able to solve the problem
Thanks to you both.
I was using the Modification Group 1 parameter in the push button attributes and trying to activate via PBO already - as is mentioned by Karthik.
But I used screen-ACTIVE = 1 alone. Now as per pawan's message i have used SCREEN-INPUT = 1. and it worked out.
Thank You once again...
Regards,
Naresh

Similar Messages

Zrps (copy of vprs) not active in sales order in order to post it to copa

Hi All,
Our company is selling products to its other entities (in other parts of the world) who are not in SAP.
We should be selling to them at 110% of the actual cost.
I copied VPRS to ZRPS. In the Pricing Procedure, i placed ZRPS on top, followed by ZPRI (it has condition record for 110%), ZNOR (manual condition type, where in if the user wants to enter a price manually, then can enter).
lf the cost of the material is $30, in the PP, ZRPS is inactive with $30, ZPRI is active with $33, no ZNOR. and the rest below to it looks beautiful with the totals.
But what's the problem is, in order to get ZRPS into COPA it has to be active, and it is not active in current situation. As ZRPS is mapped into I/C COGS in COPA as this can be seen at the time of billing.
I want this ZRPS to be active in order to get this solved. I also added VPRS at the bottom. It has a red bomb with $0 value. It did nt work either.
Hope I am clear.
Please suggest me on this or any other solution.
Thanks in advance.
Regards,
Vamsi.

Kindly check at you Item Category in VOV7 whether Determine Cost checkbox is activate or not.
As before maintaining Condition Type in the Pricing procedure ,it should be activated at Item Category level.
Best regards,
Ankur

Condition type not coming in sales order

Hi,
we have a condition type Z026. The issue is that it is not set in the order but the condition records exists. The pricing analysis shows that condition reocrd is missing but the fact is the condition record is there. The acess seq is Z026 and there are many tables in the acess sequence.
The first table in the access seq is 906 and the condition record exists but still the system says that the condition record is not found using cond preliminary step (header fields like customer/sales org/div). the cond record is maintained for relevant sales org/dist channel/customer/material. cond preliminary step means that system first looks for the header fields but everything is there.
The condition is active and the conditon is created on 21.7.10 with validitity from 21.7.10 to 31.1.2010 and the pricing date in sales order is 27.7.10. so everyhting is fine but yet the condition is not coming in sales order
what could be the issue.
regds

Hi,
Now try creating a sales order with 20.07.2010 as the pricing date. It will work. Create another order with 21.07.2010 and it will not work. If so, it is due to the validity date. When you give 21.07.2010 as validity date and there is already another record which was valid on that date, the gap of one day can happen and we have experienced this. There is even an OSS note explaining this concept, which makes sense business-wise.
However you check the scenarios I have mentioned. If the behaviour is as I have mentioned, then you have to change the pricing date of your problamatic sales order to one day earlier, or move the validity date one day earlier.
If the behaviour is different, pls lemme know

VL10C double delivery notes for one sales order

Dear all,
Currently we encountered an very strange issue in our SAP. we found that via VL10C, SAP create two duplicated ourbound delivery notes for one sales order, which resulted in a double items and amount in the billing document. These two deliveries notes are complete the same, which were created with 7 sec interval via VL10C. Check in the sales order, we can see delivery Qty was double against order Qty for all the items.
does anyone have a clue on this issue? your effort and feedback will be most applicated!
Thanks & Best Regards,
Kyo NG

Hi,
I forgot this possible cause. Check Note 61148 - VL04 VL02 AME807 AME815: Insert to table VETVG and related notes, specially Note 931297 - VL10x, VL10HU - Duplicate entries displayed in STO.
Regards,
Eduardo

Billing Plan Start Date not copied to Sales order from Service Contract

Hi
We are developing a process of Creation of Service Contract and then a order confirmation.
Now based on the Order Confirmation will bill based on the Bill Plan.
The Bill plan start date in contract header is not flowing to Sales Order header while creating with reference.
Then navigating to Header Billing plan and if we input the date the billing plan dates are displayed.
We checked the copy control settings and seems like the date is not copied.Is this a standard behaviour.
If so then do we have any work arounds to achieve the same. Because the contract start date can change before confirmation.
So business wants a sales order confirmation to be created after contract creation and bill periodically as per the Sales order instead of contract.

Hi,
Appreciate ur quick response. But instead of FKDAT i need the FPLA-BEDAT to be flowed to Billing Plan.Right now iam entering the following date manually at header.Instead if it copies from Contract header then manual entry could be neglected.
Is it possible with the same routine to code with the above mentioned FPLA-BEDAT.

Price is not changing in sales order in line item

dear all.,
price is not changing in sales order on line item,error comes "CHECK ORDER STRUCTURE.
Regards,
Praveen

Dear
You can go into VA03 --> Menu --> Environment --> Partner --> display credit account (if the data is maintained, than the system springs into FD33). Another way is to check if the sales order type is assigned to credit management in the transaction OVAK (should be D for aut. credit management).
Did you enter the pricing date , prcing condition and press enter , so that it should pick the correct price?
Check this and come back
Regards
JH

Delivery proposal not possiblre in sales order atp check screen

Hi Gurus,
The system is giving a messsage saying delivery proposal not possible in sales order atp screen and i'm able to save teh sales order but it doesnot show up in MD04. I want the sales orrder to show up in MD04.
PLesae help
Thanks
Anusha

Hi,
Now you have to provide additional information about your scenario;
1) Is it a new material created that gives this problem?
2) Did you create any new MRP type or schedule line category?
3) When you say some materials-sales order is not seen in MD04 and some seen in MD04. Is there any any difference between the materials like in types, MRP views etc?
From SPRO side,
You also need to check the transfer of requirement settings in t.code OVZ1 for what requirement type assigned to your MRP type and item category. Also check the properties of the requirement type in t.code OVZH what req.class is assigned to the req.type.
Check the property of the req.class in t.code OVZG (aval.check and TOR must be checked at req. class level)
You may also need to check in t.code OPSS on the strategy (which is assigned in the material master MRP view3) on whether TOR and availability check has been activated or not.
If all are OK, then run the report which is mentioned in the earlier response.
Regards

Not Updating Open Sales Orders Value for CreditManagement

Hi Frendz,
This is the first time am implementing creditmanagement in my system tested simple credit limit check working fine.
Now testing Static and Dynamic(Automatic) it also working fine but Its not caliculating open sales orders value either static or dynamic while Creating s.o, settings made clicked on open s.o, i have already created sales orders value of 10th.
EX:- customer balance is 2lacs, credit limit is 1lac while creating s.o it always showing balance 1lac only(Instead of 1lac10th) with open sales order value is 10th.
Let me know Where i have missd settings.
Hari Prasad

hello,
it is maintained against the cr control area in ent structure.
one needs to change there.
r u in prd system or development?
becoz if prd, then this change will effect a lot of ongoing docs.
rgs,
AK

Error when trying to create a delivery note from a sales order - Internal error (-2010) occurred

Hi
I am trying to create a delivery note form a sales order in B1 V9 PL8 and I am getting the following error -
Internal error (-2010) occurred
The code has been working but we seem to be getting problems now
Can anyone suggest anything please ?
Copy of the code attached
Thanks
Andy

Hi Andrew,
Try replacing this line:
odel.Lines.BaseLine = lineno - 1
with this:
odel.Lines.BaseLine = oorder.Lines.LineNum
Beni.

Unit Cost is not Populating in Sales Order Line Level for OPM Enabled Org

Dear All,
This is to inform you that Unit Cost is not populating in Sales Order Lines. Ideally it should pick from OPM financials, but whenever i am running Cost Update it is throwing error. We need to pull out Unit Cost for Sales Analysis Report. Please suggest on the same ASAP. What are the steps needs be followed to populate the Unit Cost. Please suggest.
Thanks & Regards,
Patrick

Hi
I think it will pick from PRICE list. Why don't to you try by keeping this item in the mentioned Price list.
Regards
Raj

Partner determination functions are not determine in sales order

Dear Sap Gurus,
I have made a new partner function (P2) and have been configure it in partner determination procedure, although i hv made new customer master for the same account group. All th partner function are showing in the customer master data but these are not determine in sales order, one error is coming...this partner procedure is not defined.......kindly give me advide how to resolve this problem.
Regards
Parul Deshwal

Hi
Have you assigned the Partner determination procedure to your sales document type?
Also have you assigned the Partner function to your Partner determination procedure.
Also do the same to the sales order item partner determination
regards
Prashanth

Customer not displyed in sales order

Hi all,
I'm facing problem with customer not displyed in sales order. While i'm creating sales order sold to party and ship to party fields both are grey mode ( fileds are not accepting any values). I set up partner detemination procedure for customer, sales header and item level. I don't know where i did wrong . Please solve my problem as early as possible.
Thanks & regards
Kesav

Dear Kesav,
Did you assign Partner procedure to sales document header??
Please do this Go to SPRO>SD>Basic Functions>Partner Determination>Set Up Partner Determination-->Set Up Partner Determination for Sales Document Header
Here select the Procedure and then click on Partner Determination Procedure Assignment and assign procedure to sales document type.
Thanks,
Raja

Tax condition(JVAT) of ship to party is not triggering in Sales order

Hi,
Tax condition(JVAT) of ship to party is not triggering in sales order...
Scenario:
Tax condition types:
JCST- CST Payable
JVAT- VAT Payable GJ
Customer Tax classification for JVAT in OVK3:
1- VAT 4%
A- VAT 0%
B- VAT 2%
Material Tax classification for JVAT in OVK4:
0-Tax Exempt
1-Full Tax
In CMR for
Sold to Party:1001(Mumbai), In Sales Area Data(Billing Tab),we have
Country/Name/Tax category/Name/Tax Class./Descrption
IN / INDIA / JCST / CST Payable / 1 / CST 3%
IN / INDIA / JVAT / VAT Pay GJ / 1 / VAT 4%
In CMR for
Ship to Party:2001(Gujarat),In Sales Area Data(Billing Tab),we have
Country/Name/Tax category/Name/Tax Class./Descrption
IN / INDIA / JCST / CST Payable / 1 / CST 3%
IN / INDIA / JVAT / VAT Pay GJ / A / VAT 0%
Access Seq: JLST
Condition table : 368(Country/Region of Del Plant/Region/Tax class1-Cust/Tax Class1-Mat)
Condition record maintained for JVAT as IN/GJ/GJ/1/1 as 4%
Condition record maintained for JVAT as IN/GJ/GJ/A/1 as 0%
Now the sale(Shipping to) is happening in Gujarat..
In sales order
I entered SP:1001 and SH: 2001
When i check the pricing in sales order,condition type JVAT is triggering 4% which is not true as it as to pick 0%
Kindly guide me where i went wrong...
Regards
Azeez.Mohd

Hi Friends.
I found the solution...
Its customization mistake..
Solution:
When we have 'n' tax categories then we should have 'n' condition tables..
I have 2 tax categories: JCST and JVAT but i have only one condition table 368 which is wrong.. i should have 2 condition tables.. so i created another con. table 468 and assigned to access aeq JLST.
then when i create cond. record , we have to select the appropriate table then it will fetch accordingly.. in sales order..
with regards

Subinventories not listed in Sales Order Line

Hi Gurus,
Need your help for the below issue.
I enabled Subinventory field (through Folder>Show Filed) in the Sales Order line. But, when I click the LOV there were no subinvnentories listed. The inventory org is listed correctly. I tried with different OUs and also inventory orgs, but no use. I had created Storage subinventories only. The subinventory has stock on the item I entered in the sales order line.
Any feedback on this would be highly appreciated.
Thanks in advance.
Prasad Dhanakodi

Hi,
Doc ID: Note:737575.1 (Metalink)
Sub-Inventory Entered On Logistics Line Does Not Populate in Sales Orders
Hope this doc might give you some help.
Thanks,
Gaurav

Condition type value not update in sales order

Hello Guru's
As per the sales order in VA01 the condition type value i.e surcharge value is not updating in sales order.
But I have maintain the condition record(Surcharge)also and in Condition technique I have checked every thing is correct .
please find below I have attached the Screen short .
Please give me solution Asap.

Hi Sukdev,
Have you checked the respective pricing procedure for From and To reference step maintained against the condition type ZSUR?
Regards,
T.R.S.Praveen

Push button not active in sales order Display trasaction

Similar Messages

Maybe you are looking for