Push Button
Hi,
In this program when i click submit button i want to display Male if the Radio button is select in Male option otherwise i want to display Female. But it's not working fine, so please help me
REPORT ZJJ1.
tables : sscrfields.
parameters : p1 radiobutton group rg1,
p2 radiobutton group rg1.
selection-screen:
pushbutton /6(20) but1 user-command cli1.
initialization.
but1 = 'submit'.
at selection-screen.
if sscrfields-ucomm = 'cli1'.
if p1 = 'x'.
write 'male'.
elseif p2 = 'x'.
write 'female'.
endif.
endif.
Hi,
Refer this code
PARAMETERS & SELECT-OPTIONS *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-011.
PARAMETERS : p_pay1 RADIOBUTTON GROUP grp USER-COMMAND fc DEFAULT 'X',
p_pay2 RADIOBUTTON GROUP grp.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-001.
SELECT-OPTIONS : s_pernr FOR pa0000-pernr. "Personnel Number
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (31) text-018.
PARAMETERS : p_begda LIKE pa0000-begda OBLIGATORY. "Start Date
SELECTION-SCREEN COMMENT 52(05) text-019.
PARAMETERS : p_endda LIKE pa0000-endda OBLIGATORY. "End Date
SELECTION-SCREEN END OF LINE.
SELECT-OPTIONS : s_stat2 FOR pa0000-stat2, "Status
s_werks FOR pa0001-werks, "Personnel Area
s_raufnr FOR catsdb-raufnr MODIF ID md1. "Internal Order Number
SELECTION-SCREEN END OF BLOCK b2.
AT SELECTION-SCREEN *
AT SELECTION-SCREEN OUTPUT.
IF p_pay1 EQ 'X'.
LOOP AT SCREEN.
IF screen-group1 = 'MD1'.
screen-active = '1'.
screen-input = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ELSEIF p_pay2 EQ 'X'.
LOOP AT SCREEN.
IF screen-group1 = 'MD1'.
screen-active = '1'.
screen-input = '1'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
Regards,
Prashant
Similar Messages
-
How do I use a push button digital trigger with my 6034E DAQ board?
I am only a Lab View toddler.
I am currently using a push button, wired to PFIO/TRIG1 and DGND, with a anolog trigger. However noise is causing my program to be triggered. I was told that a digital trigger would help to reduce the random triggering. How do I create a push button digital trigger?
Thanksimplement a schmitt trigger.
Struggling with Labview wrote in message
<[email protected]>...
>I am only a Lab View toddler.
>I am currently using a push button, wired to PFIO/TRIG1 and DGND, with
>a anolog trigger. However noise is causing my program to be triggered.
>I was told that a digital trigger would help to reduce the random
>triggering. How do I create a push button digital trigger?
>Thanks -
Push button query!!!!!!! help needed
hello all,
I HAVE USED THIS LOGIC FOR MAKING THE DATA ASCENDING AND
DESECENDING,AND TRIED ALL THE
SOLUTIONS THAT WERE SUPPLIED BY MY FRIENDS IN THIS GROUP,BUT COULD NOT
CHANGE THE
VISUAL ATTRIBUTE OF THE BUTTON.I AM REPEATING MY QUERY.I WANT TO HAVE
THE
PUSH BUTTON TO SIGNIFY VISUALLY THE ASCENDING AND DESCENDING DATA I.E
WHEN THE
DATA COMES IN THE ASCENDING WAY,THE PUSH BUTTON
SHOULD HAVE A "inverted v"ACC CODE"" ALONG WITH NAME "ACC CODE" I.E IT SHOULD
LOOK LIKE "ACC CODE "ACC CODE inverted v "
AND WHEN THE DATA COMES IN THE DESCENDING WAY,THE PUSH BUTTON
SHOULD HAVE A " v".I.E IT SHOULD
LOOK LIKE "ACC CODE "ACC CODE' v' ".SO PLZ HELP me TO GET THIS .
Any changes should be made to nls_lang parameter in registry???????????
PLZ LET ME KNOW WHAT IS FONT THAT I SHOULD USE.U CAN CHANGE THE CODING
THAT I HAVE WRITTEN
IN THE "WHEN BUTTON PRESSED" TRIGGER OF ACC_CODE.
BEGIN
go_block('age_tran');
BEGIN
IF
get_item_property('PB_ACC_ORDER',LABEL)='&Acc Code' THEN
set_block_property('age_tran',order_by,'acc_code ASC');
execute_query(no_validate);
SET_ITEM_PROPERTY('PB_ACC_ORDER',LABEL,'&Acc Code'||'
'||upper(chr(94)));
ElSIF
get_item_property('pb_acc_order',LABEL)='&Acc Code'||'
'||upper(chr(94)) THEN
Set_block_property('age_tran',order_by,' acc_code DESC');
execute_query(no_validate);
SET_ITEM_PROPERTY('pb_acc_order',LABEL,'&Acc Code'||' '||'v');
ELSE
Set_block_property('age_tran',order_by,'BALANCE DESC');
execute_query(no_validate);
SET_ITEM_PROPERTY('pb_acc_order',LABEL,'&Acc Code');
END IF;
END;
END;
THANKING UHi Shiju,
U can use the combination of fornt slash(/) and back slash(\) to fulfil ur requirement.
For ascending u can use /\ and for descending u can use \/. Does this solve the purpose?
I think it will.
Suprabhat. -
How can I open a .pdf file in a browser on a click on a push button
I am using oracle 10g developer suit for form designing.
There is a .pdf file in the application server.
I want it to open it in a browser when a push button is clicked.
Could you please tell me how can I do that?
Regardshi
u can use web.show_document() for that.
but if you want to open pdf file only then use
client_host()
sarah -
How to get GUI Status(Push Buttons) in ALV Report
Hi Friends
I have a requirement in a way that:
Once selection-screen was processed,an ALV report has to come and above the ALV List,I need a custom GUI Status(4 Push Button) with Push Buttons Logic.
Once I had clicks on thesse push button,I need to display one more ALV List and above this List,again I need a custom GUI Status(2 Push Buttons) with Push Buttons Logic.
Can anyone throw some light how we can achieve this.
Thanks for your cooperation!
Regards,
Madisettydata: rt_extab type slis_t_extab,
g_ucomm like sy-ucomm ,
g_selfield type slis_selfield.
form alv_display .
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
i_callback_program = g_repid
i_callback_pf_status_set = 'PF_STATUS'
i_callback_user_command = 'USER_COMM'
it_fieldcat = it_fldcat
tables
t_outtab = it_final1
perform pf_status using rt_extab.
perform user_comm using g_ucomm g_selfield .
endform.
form pf_status using p_rt_extab.
set pf-status 'PF_STATUS' excluding p_rt_extab.
endform.
form user_comm using p_ucomm like sy-ucomm
p_selfield type slis_selfield.
data: l_row type i.
case p_ucomm.
when 'DISPLAY_PO'.
loop at it_final1 into wa_final1.
if wa_final1-sel eq 'X' .
l_row = l_row + 1.
endif.
if l_row gt 1.
message e004.
endif.
clear wa_final1.
endloop.
p_selfield-fieldname = 'SEL'.
read table it_final1 into wa_final1 index p_selfield-tabindex .
set parameter id 'BES' field wa_final1-ebeln.
call transaction 'ME23N'.
endcase.
endform.
*create user interface for gui status by double clicking on 'PF_STATUS'.
*Check the above sample code . -
Dear Experts,
How to add pushbutton in alv report.....
*& Report ZTT_TEST_ALV
REPORT ZTT_TEST_ALV.
*data declarations
type-pools : SLIS.
* data : BEGIN OF wa_kna1,
* kunnr type kunnr,
* name1 type name1,
* end of wa_kna1,
* it_kna1 like tABLE OF wa_kna1.
data : begin of wa_mara,
matnr type matnr,
end of wa_mara,
it_mara like table of wa_mara.
data : it_fcat type slis_t_fieldcat_alv,
wa_fcat like line of it_fcat.
*selection screen
SELECTION-SCREEN begin of block k with frame title text-001.
* select-OPTIONS : s_kunnr for wa_kna1-kunnr.
select-OPTIONS : s_matnr for wa_mara-matnr.
SELECTION-SCREEN end of block k.
*select auery
*SELECT kunnr name1 INTO table it_kna1 from kna1 where kunnr in s_kunnr.
select matnr into table it_mara from mara where matnr in s_matnr.
*for displaying fieldcatalog
PERFORM fcat using '1' 'MATNR' 'material Number' 'C410' '20'.
* PERFORM fcat using '2' 'NAME1' 'Customer Name' 'C410' '36'.
*for displaying output
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER = ' '
* I_BUFFER_ACTIVE = ' '
* I_CALLBACK_PROGRAM = ' '
I_CALLBACK_PF_STATUS_SET = 'SET_PF_STATUS'
* I_CALLBACK_USER_COMMAND = ' '
* I_CALLBACK_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_END_OF_LIST = ' '
* I_STRUCTURE_NAME =
* I_BACKGROUND_ID = ' '
I_GRID_TITLE = 'Report for Customer Details'
* I_GRID_SETTINGS =
* IS_LAYOUT =
IT_FIELDCAT = it_fcat[]
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS =
* IT_SORT =
* IT_FILTER =
* IS_SEL_HIDE =
* I_DEFAULT = 'X'
* I_SAVE = ' '
* IS_VARIANT =
* IT_EVENTS =
* IT_EVENT_EXIT =
* IS_PRINT =
* IS_REPREP_ID =
* I_SCREEN_START_COLUMN = 0
* I_SCREEN_START_LINE = 0
* I_SCREEN_END_COLUMN = 0
* I_SCREEN_END_LINE = 0
* I_HTML_HEIGHT_TOP = 0
* I_HTML_HEIGHT_END = 0
* IT_ALV_GRAPHICS =
* IT_HYPERLINK =
* IT_ADD_FIELDCAT =
* IT_EXCEPT_QINFO =
* IR_SALV_FULLSCREEN_ADAPTER =
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = it_mara.
* EXCEPTIONS
* PROGRAM_ERROR = 1
* OTHERS = 2
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
* EXPORTING
**** I_INTERFACE_CHECK = ' '
**** I_CALLBACK_PROGRAM =
**** I_CALLBACK_PF_STATUS_SET = ' '
**** I_CALLBACK_USER_COMMAND = ' '
**** IS_LAYOUT =
* IT_FIELDCAT = it_fcat
**** IT_EXCLUDING =
**** IT_SPECIAL_GROUPS =
**** IT_SORT =
**** IT_FILTER =
**** IS_SEL_HIDE =
**** I_SCREEN_START_COLUMN = 0
**** I_SCREEN_START_LINE = 0
**** I_SCREEN_END_COLUMN = 0
**** I_SCREEN_END_LINE = 0
**** I_DEFAULT = 'X'
**** I_SAVE = ' '
**** IS_VARIANT =
**** IT_EVENTS =
**** IT_EVENT_EXIT =
*** i_tabname_header =
*** i_tabname_item =
**** I_STRUCTURE_NAME_HEADER =
**** I_STRUCTURE_NAME_ITEM =
*** is_keyinfo =
**** IS_PRINT =
**** IS_REPREP_ID =
**** I_BYPASSING_BUFFER =
**** I_BUFFER_ACTIVE =
**** IR_SALV_HIERSEQ_ADAPTER =
**** IT_EXCEPT_QINFO =
**** I_SUPPRESS_EMPTY_DATA = ABAP_FALSE
**** IMPORTING
**** E_EXIT_CAUSED_BY_CALLER =
**** ES_EXIT_CAUSED_BY_USER =
* tables
** t_outtab_header = it_
* t_outtab_item = it_kna1.
**** EXCEPTIONS
**** PROGRAM_ERROR = 1
**** OTHERS = 2
***IF sy-subrc <> 0.
**** MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
**** WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
***ENDIF.
*& Form FCAT
* text
* -->P_0052 text
* -->P_0053 text
* -->P_0054 text
form FCAT using fp_col_pos
fp_fieldname
fp_seltext_m
fp_emphasize
fp_outputlen..
wa_fcat-col_pos = fp_col_pos.
wa_fcat-fieldname = fp_fieldname.
wa_fcat-seltext_m = fp_seltext_m.
wa_fcat-emphasize = fp_emphasize.
wa_fcat-outputlen = fp_outputlen.
append wa_fcat to it_fcat.
clear : wa_fcat.
endform. " FCAT
FORM SET_PF_STATUS .
SET PF-STATUS 'ZNEWSTATUS' .
"Copy of 'STANDARD' pf_status from fgroup SALV
endform.
i need one push button in alv output display.
Thanks and Regards,
Thirukumaran. RHI THIRU TRY FOLLOWING CODES:
*& Report ZSAMPLE
REPORT ZSAMPLE.
TABLES:MARA.
TYPE-POOLS: SLIS.
TYPES:BEGIN OF TY_ITAB,
MATNR LIKE MARA-MATNR,
ERSDA LIKE MARA-ERSDA,
END OF TY_ITAB.
DATA:ITAB TYPE STANDARD TABLE OF TY_ITAB WITH HEADER LINE.
DATA:FCAT TYPE SLIS_T_FIELDCAT_ALV,
WA_FCAT TYPE SLIS_FIELDCAT_ALV,
LAYOUT TYPE SLIS_LAYOUT_ALV,
WA_LAYOUT TYPE SLIS_LAYOUT_ALV.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS:P_MATNR TYPE MARA-MATNR.
SELECTION-SCREEN END OF BLOCK B1.
START-OF-SELECTION.
PERFORM FIELDCAT.
LAYOUT-ZEBRA = 'X'.
PERFORM OUTPUT.
*& Form PF_STATUS
text
-->RT_EXTAB text
FORM PF_STATUS USING RT_EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'BUTT'.
ENDFORM. "PF_STATUS
*& Form PUSH_BUTT1
text
-->R_UCOMM text
-->RS_SELFIELD text
FORM GET USING R_UCOMM LIKE SY-UCOMM RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
WHEN 'GET'.
IF SY-SUBRC EQ 0.
CALL TRANSACTION 'SE11'.
ELSE.
ENDIF.
WHEN 'EXIT' OR 'CANCEL' .
LEAVE PROGRAM.
ENDCASE.
ENDFORM. "PUSH_BUTT1
*& Form FIELDCAT
text
--> p1 text
<-- p2 text
FORM FIELDCAT .
WA_FCAT-SELTEXT_L = 'Select'.
WA_FCAT-COL_POS = '1'.
WA_FCAT-FIELDNAME = 'CHECK'.
WA_FCAT-CHECKBOX = 'X'.
WA_FCAT-TABNAME = 'ITAB'.
WA_FCAT-OUTPUTLEN = '4'.
WA_FCAT-INPUT(1) = 'X'.
WA_FCAT-EDIT_MASK(1) = 'X'.
WA_FCAT-EDIT(1) = 'X'.
APPEND WA_FCAT TO FCAT.
CLEAR WA_FCAT.
WA_FCAT-SELTEXT_L = 'Material Number'.
WA_FCAT-COL_POS = '2'.
WA_FCAT-FIELDNAME = 'MATNR'.
WA_FCAT-TABNAME = 'ITAB'.
WA_FCAT-OUTPUTLEN = '18'.
APPEND WA_FCAT TO FCAT.
CLEAR WA_FCAT.
WA_FCAT-SELTEXT_L = 'Date'.
WA_FCAT-COL_POS = '3'.
WA_FCAT-FIELDNAME = 'ERSDA'.
WA_FCAT-TABNAME = 'ITAB'.
WA_FCAT-OUTPUTLEN = '8'.
APPEND WA_FCAT TO FCAT.
CLEAR WA_FCAT.
ENDFORM. " FIELDCAT
*& Form OUTPUT
text
--> p1 text
<-- p2 text
FORM OUTPUT .
SELECT MATNR ERSDA FROM MARA
INTO TABLE ITAB
WHERE MATNR EQ P_MATNR.
IF SY-SUBRC EQ 0.
PERFORM GRID.
ELSE.
MESSAGE 'No Records Found' TYPE 'I'.
ENDIF.
ENDFORM. " OUTPUT
*& Form GRID
text
--> p1 text
<-- p2 text
FORM GRID .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = 'PF_STATUS'
I_CALLBACK_USER_COMMAND = 'GET'
IS_LAYOUT = LAYOUT
IT_FIELDCAT = FCAT
I_DEFAULT = 'X'
TABLES
T_OUTTAB = ITAB.
ENDFORM. " GRID
REGARDS,
SAKTHIVEL.VT -
How to give push button in alv report output
hi,
my requirement is that , i have to give push button in alv report output(item level) not in application toolbar, i am using reuse_alv_grid_display FM, can any body provide me sample code
regards,
siva kumarhave a look at this thread, also has a sample report at the end from Uwe Schieferstein.
[button on alv list|How to add and program a pushbutton on ALV grid line;
seems not to work try this:
How to add and program a pushbutton on ALV grid line
Edited by: Micky Oestreich on May 15, 2008 10:20 PM -
How to inactive the push button on tool bar of alv report
hi masters,
i m working on the ALV interactive report, in this report i have to do 2 different operation on 2 screen.
eg.- on first screen i have the push button for 'data' and on second screen i will have the push button for 'upload'.
in this i don't want to give the 'upload' button on first screen and same i don't want to give the 'data' button on 2nd screen.
i tried with using the 2 different gui status and 2 different PF-STATUS but its not working.
anyone can tell me how i can deactivate the 'upload' button on first screen and how i can do same for 'get' buttton on 2nd screen.
regards,
vickyHI Vicky ,
if u want an interactive ALV report , there are lot of forums already having the solution for that , but let me give u the solution anyway.
In the function module "REUSE_ALV_GRID_DISPLAY" , import parameters
I_CALLBACK_PF_STATUS_SET = 'FLIGHT'
I_CALLBACK_USER_COMMAND = 'BUTTON_CLICK'
has to be supplied to this function module . The PF status is where u hav created the two buttons , that PF status has to be given here .If the user clicks on the button then it is handled by the form routines . Inside the sub-routine based on the button the user has selected u could perform the action.
FORM FLIGHT USING RT_EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'FLIGHT' EXCLUDING RT_EXTAB.
ENDFORM.
Here the "Flight" is the PF_status .
FORM BUTTON_CLICK USING UCOMM type SY-UCOMM
SELFIELD type SLIS_SELFIELD.
CASE UCOMM.
WHEN 'BUTTON!' .
write ur code for button 1.
WHEN "BUTTON"
*Write ur code for button2 .
end case.
endform.
for any queries reply back.
regards -
How can we place a push button in ALV report
hi
could anybody inform me
how can we place a push button in ALV report
thanx
regards
kals.Hi kals.
please have a look at demoprogram
SALV_DEMO_TABLE_FUNCTIONS
BCALV_GRID_05
Regards
Bernd -
Push button details in web ui of crm 6.0
Hi All,
I would like to view and know the details of existing push buttion function in web ui crm screen.
Though clicking F2 on the push button, i am able to see the technical details of Component, View, Context Node and role key.
I need to add the same existing functionality in a differenct view for which i am not able to find the details in the Structurte of Component IUICMDC. Please help us.
Thanks and Regards to all
P.RajHi,
You need to know wich view you want to add the new push button.
In trx. BSP_WD_CMPWB select the view and enhance it. Go to the view layout and check if you see something like this
<uhtmlb:toolbar id = "Toolbar"
buttons = "<%= controller->get_buttons( ) %>"
maxButtonNumber = "3" />
If yes, and I think you will find enhance the method get_BUTTONS OF _impl class
Add the code
CLEAR ls_button.
ls_button-id = 'New Button'.
ls_button-text = 'New text'.
ls_button-on_click = 'NEWMETH'.
ls_button-enabled = 'X'
APPEND ls_button TO rt_buttons.
Create a method with name you used in on_click property.
Best regards,
Caíque Escaler -
How to add push button in report.
Hi,
how to add a push button in the standard list report and on clicking which the line-size of the screen should reduce from 300 to 100.
how to proceed.
Can anyone help me.
Regards
GuhapriyanHii Guhapriyam,
You can ceate PUSHBUTTON in selection-screen like Below
SELECTION-SCREEN PUSHBUTTON 2(10) text-004 USER-COMMAND CL1.
Create a variable to hold the processed PUSHBUTTON value like
DATA v_flag TYPE flag.
The PUSHBUTTON will be processed at the event AT SELECTION-SCREEN. So write your code like below
AT SELECTION-SCREEN.
IF sy-ucomm EQ 'CL1'.
v_flag = 1. "Buttob clicked
ENDIF.
START-OF-SELECTION.
IF v_flag EQ 1.
NEW-PAGE LINE-SIZE 100.
ENDIF.
OR
The best way of doing this by setting PF-STATUS like
START-OF-SELCTION.
SET PF-STATUS 'ZSTATUS'. "Double click on this and set the pushButton in standard toolbar option and in function key specify the BACK, EXIT and CANCEL button .
Then write your logic at the event AT USER-COMMAND.
AT USER-COMMAND.
CASE sy-ucomm.
WHEN 'RED'.
NEW-PAGE LINE-SIZE 100.
WHEN 'BACK' OR 'CANCEL' OR 'EXIT'.
LEAVE SCREEN.
WHEN OTHERS.
ENDCASE.
regards
Syed -
How to put a push button in the top of page of ALV
Hi at all,
I need to put a push button in TOP OF PAGE .
My code is below and i'd like to put a push button to do something.
FORM top_of_page USING r_ddoc TYPE REF TO cl_dd_document.
DATA: text TYPE sdydo_text_element.
DATA: text_table TYPE sdydo_text_table.
CALL METHOD r_ddoc->initialize_document.
Title
text = text-301.
CALL METHOD r_ddoc->add_text
EXPORTING
text = text
sap_style = 'HEADING'.
CLEAR text.
endform.
Thanks at all.
ENDFORM.Hi Domenico,
For pushbuttons on Dynamic Documents please refer to this link:
http://help.sap.com/saphelp_nw70/helpdata/EN/b6/ab3a7503ac11d4a73f0000e83dd863/frameset.htm
Regards
Marcin -
How to add a push button in ALV Grid Top-of-page
Is it possible to add a push button to the top-of-page in Alv grid display?if yes, then how? I am not using OO ABAP and am using reuse_alv_grid_display with top-of-page event.
Hi,
I am not sure whether we can add push button in top-of -page or not. But instead of that if you want to add button on toolbar as per your requirement then follow below link. it will useful.
http://www.sap-img.com/abap/example-of-a-simple-alv-grid-report.htm
Ram. -
Creating a push button in Condition Tab in me21n
Hello Experts,
I want to add one push button in me21n PO creation.
Is this possible by using enhancement MM06E005?
Could you suggest something?
The push button will be in 'condition' tab in item level view.
After clicking this button a screen will be displayed if the condition
category is B to enter other subsequent vendor's code(which comes
after clicking on condition and viewing condition details) that is
in case of octroi costs.
Thanking you!Hi ,
Yes you can do this in enhancement MM06E005.
Goto --> Tcode se51 -->program name : SAPLXM06
Screen No : 0111
Make the changes in this layout.So that changes will reflect to customer Data tab at Item level in Me21n.
Use tabstrip or create a subscreen for the above program name while creating a new screen..
This may helpfull to resolve your problem.
Thank you,
Thanks,
AMS -
My ipod nano 4th generation only works when it is plugged into the computer; otherwise, the screen turns black and it is completely unresponsive to any efforts such as pushing buttons, reseting, etc. What should I do?
Sounds like the battery is shot and in need of a replacement. You can have Apple replace the battery for a flat fee or you can send it into a third party repair center for a bit less.
Not much else you can do for troubleshooting this one.
B-rock -
Push button not active in sales order Display trasaction
Hello,
I added a push button to sales order item -> additional data B tab. The push button is INACTIVE when i see via VA03 transaction where as ACTIVE if i see via VA02 transaction.
My requirement is that i have to make it active VA03 Transactions also.
How can i do that?. Please help me in this regard.
Thank You,
Naresh.Hello,
I could able to solve the problem
Thanks to you both.
I was using the Modification Group 1 parameter in the push button attributes and trying to activate via PBO already - as is mentioned by Karthik.
But I used screen-ACTIVE = 1 alone. Now as per pawan's message i have used SCREEN-INPUT = 1. and it worked out.
Thank You once again...
Regards,
Naresh
Maybe you are looking for
-
Ipod touch generation 1 speakers
hi my name is alicia flores and i have gotten an ipod touch generaton 1 for my birthday and it does not play any music without head phones. but it will play sound like when i go to text i can here like the popping sound of the keyboard clicking on ev
-
Problem compiling Abstract class
Hi I have writting an abstract class Sort.java and another class BubbleSort.java. I am having problems compiling BubbleSort.java class. The following is the error message BubbleSort.java:8: missing method body, or declare abstract public int doS
-
Firefox does not open on-screen - looks like it scrolls off to the side.
When I mouse over the Firefox icon, I can see that the window is open, but when I click on the icon, the window does not open onscreen and it fades in and out of the right side of my screen. Runninf Firefox 7.0.1, Windows 7 64-bit. Thanks
-
TpT2 Stylus slot is broken and the stylus fell out.
Hello, The stylus slot in the top left corner of my TPT2 is broken and thus keeps causing the stylus to fall out unexpectedly. The most recent time this happened, I couldn't find it anywhere. So I am hoping that the local Lenovo depot will be able to
-
I rented a movie on my mac mini buts its pixelated, how can i get it to work?
I rented a movie from the itunes store i can get audio but the video is pixelated. How can I fix this?