Push data from PSA to info target in bi 7.0

Hi,
i am doing delta update with option only PSA,
now data is coming in to the PDA but how to pass it that data form here to res info target?
Best regards,
dushyant.

Hi Dushyant,
Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
cheers
sunil

Similar Messages

Need help to load data from PSA TO deta targets

Hello BW Gurus,
I have done the INIT for 2LSI_11_VAHDR and data target I have selected is OSD_CO3. after doing INIT I realized that I have other two ODS which I want select as data target with same datasource.
My question is
1) Is it possible / recommended to create another infopackage and do the INIT for pending ODS.
2) If I want to add the remaining two ODS in existing
request, can you please suggest me how I can do that.
Thank you very much
Krish

Hi Krish,
I don't think it is necessary to create another InfoPack to load the other two DataTargets(ODS. Instead you can delete the Initialization for source systems from the cube and then delete the same from the InfoPack (scheduler option -->Init for Source system) and then check the other two ODS as Datatargets and then schedule with Initialization option.
Otherwise also you can create IPack for the 2 ODS as datatargets and then do the Init. But i prefer the 1st way unless you have huge data in the cube for the init request.
Hope it helps...
Best Regards,
DMK
*Assign points if it helps...

Error when loading the data from PSA to ODS......

Hi BW guru's,
i am facing one problem while loading the data from PSA to ODS.so please help me in this regard.
Please give a step by step guidelines for me...
the error while loading the data from PSA to ODS is "There are no PSA tables for these selection criteria","An error occurred when reading PSA data".
thanks in advance,
ashok.

hi ashok,
u can push data from psa to ods, for this goto the psa in rsa1>psa>goto that request>rightclick>select " schedule update Immediately ", then data will moved from psa to ods.
or
In ods > delete the failed request>goto the processing tab-->select 3rd option " psa and then subsequentially to data targets ", --> schedule the infopackage.
bye
sunil

How to update data from PSA to target in BI 7.0

Hi all,
can you pls tell me the procedure/process to load data from PSA to data target. We got a load failure while activating the data in DSO.We made necessary changes to the incorrect data in PSA and we saved. When i run the DTP again it gives me 0 records. Is there any option like in 3.5 where we can select the PSA right click.....schedule the update/start the update immediate. or any other process which solves my problem.
Thank you all,
Regards,
Praveen

A new object concept is available for the ETL process as sap Net Weaver 2004. To implement the EDW layer paradigm, sap has changed the concept of the ETL data flow and process design.
    The most important innovations in the modified object concept are as followes.
1. When a Datasource is activated, a PSA table is generated in the inbound laywr of the BI so that data
   can already be loaded.
2 The infopackage is only used to load the data from the source system into PSA.
3 This is followed by the data transfer proccess (DTP) step to transfer data within the BI from one
   persistent object to another by using transformation and filters,
4 The definition for which data targets the data from the Datasource is to be updated into occurs in
   transformations. this is also where fields of Datasource are assigned to infoObjects of the target
   objects in bi.

Updating data from PSA to Data Target

Hi,
I just want to update data from PSA to data target.
There is a process chain running daily it will updating Master Data in to 0Vendor object. This process chain is updating only upto PSA not the data target. I just want to update from PSA to data target.
There is a update rule for 0Vendor but itu2019s not active at the movement and also it is not properly mapped with the 0Vendor.
Is there any other method which I can update data from PSA to Data target with in the same process chain.
Thanks
Ganesh

If this is BW 3.5, change the infopackage setting to load to data target as well.
This is a other w ay than using the update from infopackage.
if this is 7.0, Use the DTP to load from PSA(datasource) to Target.
Let me know if this helps.
Thanks
Sachin

Unable to load the data from PSA to INFOCUBE

Hi BI Experts, good afternoon.
    I am loading 3 years data( Full load ) from R/3 to Infocube.
   So loaded the data by monthwise. So i created 36 info packages.
Everything is fine. But i got a error in Jan 2005 and Mar 2005. It is the same error in both months. That is Caller 01and caller 02 errors( Means invalid characteristics are there PSA data )
So i deleted both PSA and Data target Requests and again i loaded the data only to PSA.
Here i got data in PSA without fail.
Then i tried to load the data from PSA to Infocube MANUALLY.
But its not happening.
One message came this
       SID 60,758 is smaller than the compress SID of cube ZIC_C03; no        request booking.
   Please give me the solution how to solve this problem.
Thanks & Regards
     Anjali

Hi Teja,
   Thanks for the good response.
How can i check whether it is already compressed or not?
Pls give me the reply.
Thanks
          Anjali

How to delete the duplicate data from PSA Table

Dear All,
How to delete the duplicate data from PSA Table, I have the purchase cube and I am getting the data from Item data source.
In PSA table, I found the some cancellation records for that particular records quantity would be negative for the same record value would be positive.
Due to this reason the quantity is updated to target but the values would summarized and got the summarized value of all normal and cancellation .
Please let me know the solution how to delete the data while updating to the target.
Thanks
Regards,
Sai

Hi,
in deleting the records in PSA table difficult and how many you will the delete.
you can achieve the different ways.
1. creating the DSO maintain the some key fields it will overwrite the based on key fields.
2. you can write the ABAP logic deleting the duplicate records at info package level check with the your ABAPer.
3.you can restrict the cancellation records at query level.
Thanks,
Phani.

How to load data from PSA in BI 7.0

Hi,
Gurus
I'm trying to load data from PSA to my InfoObject masterdata but I can't get the change mode, so I change the processing to data Target.Right now its on PSA only
I will reward poaints
Regards
Alex

Hi,
I am just a beginner in 7.0, i had the same issue I loaded the master data in PSA but couldn't load in Data target i.e. info object (correct me if my understanding of your problem is wrong).
Try these steps:
1) Create and activate Transformation.
2) Create and activate DTP first then in DTP itself in <b>Execute tab</b> click "execute" ,go to infoobject right click on the info object you have created and select "maintain info object" , the datas will be loaded into info object
*Please assign points if useful.

Load data from PSA to ODS in Process Chain

Hi All,
I want to load the data from PSA to ODS. I am using 3.5 Version. I have created the Info Package to load the data from R/3 to ODS.
I just want to load data in the following Condition
1. Need to load data from R/3 to PSA.
2. Need to load data from PSA to ODS.
I need to include this two Info Packages in Process Chain.
I dont find any option to load PSA to ODS through Process Chain..
Pls Suggest.
Thanks,
Ram.

Hi Ram,
You can keep the settings in the infopackage to load data from R/3 to PSA (by giving the settings as PSA and then into datatargets). Specify the option Update in all data targets for which the Rule Exist unde rthe Data Targets Tab.
Then in Process Chian, there is an option by the name REad PSA and Update Datatarget under the node Load Process and Post-Processing in the Process Types.
In the varaint, specify the infopackage name and save the varinat and uise it in the PC.
Regards
Sunil

Unable to Delete Data from PSA

Hi Experts,
I have a process chain which delete data from PSA on weekly basis . it running good . Since one month one of data target PSA data not deleting.
it gives me error like DDL time(___1): .........2 milliseconds
Delete request REQU_03RM2LOJ284N3GLM7Q574WLAO from PSA 8Z0MM_O39_OA: Error - subrc: 2
When i am tring to delete manually it gives me above error only.
I used programme (RSAR_PSA_CLEANUP_DIRECTORY)
for deleteting PSA Data this programme gives me errors request already deleted from data base. But still those request available when i am looking into PSA data.
it's happen only quality system not in the Production.
Kind Regards,
ve.

Hi Srinath,
when i am looking into system there is no programeme with name(SAP_PSA_ZEROCORREC) But another programme RSAR_PSA_CLEANUP_DIRECTORY is available i tried with these programme for deleting PSA it gives me error like request deleted from database.
But it gives me an error indicator only.
i am tried to delete manually by selectiong those request from PSA it gives me error DDL Time (______1) 2 milliseconds.
Kind Regards,
ve.

Loading Data from PSA to ODS

Hi,
right now there are nearly 50 requests in my PSA. I want to load entire data from PSA to ODS at a time. Ours is 3.x flow. I m able to load one request at a time. Can anyone help me to load all requests at atime?
Please give me step by step.

Hi Narendra,
First of all all the records are unable to pick up at a time i single attempt due to. follow the reason
It is not possible to load all the PSA requests' to target at a time.Because records picks up from PSA to Data target one by one due dependencies of routine run on the data transfer up to the extent. anyway if you can do this thing the process of loading the requests' one by one, offcourse it is totally depends upon manual .
Hope you are understood the scenario.
Regards,
Vamsi Krishna Chandolu

Error in loading data from PSA to masterdataTables by using ProcessManually

Hello,
While loading Attribute master data to Masterdata tables, the data is loaded successfully to PSA but when I clicked process manually tab in the monitor screen to load the Attribute master data to Masterdata tables it is showing error.
Can anyone pls help me in solving this issue.
Thanks,
Soujanya

Hi Soujanya,
If it is a SAP BI 7 data flow, in order to load data from PSA to the InfoObject master data tables, you have to run the corresponding DTP.
On the other hand, if it is a SAP BW 3.x data flow, the InfoPackage should be configured so as to update data to subsequent targets (that is to say, the InfoObject).
Finally, take into account that if the DataSource provides duplicate records, the DTP or the InfoPackage (depending on the dataflow version) should be configured in order to deal with it. Otherwise, you could receive error messages during data load.
I hope this helps you.
Regards,
Maximiliano

Data from PSA to ODS taking very very long time and fails

Hi Gurus,
I have been trying to load data from my CRM system to BI with some range in Data Selection.
I was loading to PSA then then Data Target (Package by Package). It failed twice by taking lot of time.
Then I brought the data to the PSA only successfully and tried moving it to ODS and shockingly long waiting hours it took and failed.
Please help me resolve this.
Thanks

Hi,
Search the BI short dump overview for the short dump that belongs to the request.
Pay attention to the correct time and date on the selection screen.
You access a short dump list using the wizard or the menu path
"Environment -> Short dump -> In the Data Warehouse".
And also some TRFC time out error.
We have fixed it by increasing the profile parameter time and also clearing the old errored TRFC which where lying in the Source.
Yet this has been running for about 20 hours to move data from PSA to DSO. and only some of the Data Packages are turning into Green and Some in Red and Some in Yellow.
Please help
Thanks

Confused How to push Data from Oracle DB Tables into Hyperion Planning?

HI
I m Newbie to ODI. My DataSource is Oracle 11g Database (HR Tables) and my Target is Hyperion Planning.
I successful imported Oracle DB HR tables into ODI and Hyperion Planning Dimensions Like(Employee) but i dont understand in " ODI Interface" how i am going to do Mapping between Oracle tables and Planning application Dimension, am i doing wrong way?
I am confused if i have to push Data from Oracle 10g HR Tables into Hyperion Planning am i following right approach ?
Looking for your guideline...
Regards
Sher

Hi John
Well i have working knowledge in ODI, i did whole complete cycle and i did customization project for Oracle EBS to Data warehouse though ODI.
What, I am NOT able to figure out How to LINK Hyperion Planning Outline to Oracle EBS HR Tables. cause in Hyperion Outline i m able to view Dimensions Not particular Column to map with EBS HR Table (column).
Eample:
In EBS HR we have Employee Number in Per_all_people_f but in Hyperion Planning Dimension is ONLY Employee.
Your response highly appreciated.
Chreeez
Sher

Error while updating data from PSA to ODS

Hi Sap Gurus,
I am facing the error while updating data from PSA to ODS in BI 7.0
The exact error message is:
The argument 'TBD' cannot be interpreted as a number
The error was triggered at the following point in the program:
GP44QSI5RV9ZA5X0NX0YMTP1FRJ 5212
Please suggest how to proceed on this issue.
Points will be awarded.

Hi ,
Try to simulate the process.That can give you exact error location.
It seems like while updating few records may be no in the format of the field in which it is updated.
Regards
Rahul Bindroo

Push data from PSA to info target in bi 7.0

Similar Messages

Maybe you are looking for