Push mass agent installation from the grid.

Hi,
I am planning to push the mass agent installation from the grid..
In how many servers we can push the agents in parallel at a time.
Is there any limit of number of servers which agents need to be installed?
Thanks,
Mahi

Hi,
there is no limit but I advice to test it on one if your procedure works before you run it on all servers.
REgards,
Tom

Similar Messages

The Java load in database SID / hostname has not been configured yet. You cannot run an installation from the System Copy folder with this load

Dear Gurus,
We are facing the below issue when performing a homogeneous system copy of NW 7.0 system using backup/restore method for DB6 system.
The Java load in database <SID>/<hostname> has not been configured yet. You cannot run an installation from the System Copy folder with this load.
We went through the SAP Note http://service.sap.com/sap/support/notes/2049842, and followed the same but no luck.
We updated the Kernel to the latest, but still no luck.
Request for your quick help as we have to complete it by EOD today.
Thanks a lot in advance.
Best Regards,
Anuj

Hello Ashutosh ,
Thanks for your reply.
We have gone followed the below sequence:
SCS Installation
Database Instance Installation using backup/restore method
CI installation. -> getting error, when we provide the Java Components DVD.
Best Regards,
Anuj

Generate a report from the grid to get all the 10g instance name and size

Hi Guru
Greetings foe the day
can you help me to Generate a report from the grid to get all the 10g instance name and size.
If its passible you would help me a ton
Thank you

If you can see in you query, you asking to view dba_segments for one instance and the other query is over the MGMT$DB_TABLESPACES view but NOT "WHERE" clouse is using, and if ypu have more once instance then than view sum all the tablespaces sizes.
How many instanced are registed in your grid control?
http://www.jpuga.cl
Regards
user625256 wrote:
Hi
can any one help on this
The o/p
SQL> select sum(bytes)/1024/1024/1024 from dba_Segments;
SUM(BYTES)/1024/1024/1024
3549.80879
when i query from the above mgmt its returns 1,507,473.149 GB
select target_name DB_NAME,host_name Host,sum(trunc(tablespace_used_size/1024/1024/1024,2)) size_GB
from MGMT$DB_TABLESPACES group by host_name,target_name order by target_name
it gives the size as 1,507,473.149 GB
Thank you in advance

Upgrading Management Agents after upgrading the Grid Control to 10.2..0.5

Hello:
I am pretty new to implementing Grid control. I have been assigned the task of upgrading the Grid control to 10.2.0.5. I successfully upgraded the GC to 10.2.0.5. Now the next task is to upgrade the Agents running on other Database nodes. I have 6 databases running on Solaris 9.0 , few of them running on RHEL 5.0 x86, a few of them on RHEL 5.0 86*64. I am looking to upgrade these agents in one shot. Is there any way I can accomplish this from Grid control. If it is the case, then do I have to download and upload the patchsets for 10.2.0.5 for various platforms into the Grid Control.
I would be very happy if you could give me valid pointers which would help me to understand and move further.
Regards,
Bala

Yes you can upgrade the agent at one shot.Refer the following OBE
http://www.oracle.com/technology/obe/obe10gemgc_10204/agentpatch_upgrade.htm

Uninstaller utility does not remove the installation from the registry

In our environment, we publish a script in Group Policy so that both the ActiveX and Plugin installs for flash player are easily installed for staff that have limited user access on their computers. I usually remove or replace the old MSI files from the path the above script installs from when I get new versions of Flash Player. For a while, I've run into a problem where when the new MSI files are installed, they try to uninstall the existing installation and fail because the old MSI file is no longer at the original installation source path. I've tried to remedy this by having the script use the uninstall_flash_player utility to manually remove the activex and plugin first, but this utility does not remove the installation details of each from the registry, and the subsequent installations of the MSI files fail. I have to uninstall the existing flash player installations first or perform a registry hack to formally remove the installation from Windows, and then the new installation will succeed.
Does anybody have any advice for making this process work better? Would this be considered a bug with the uninstaller tool?

Hi, Until someone can reply to your thread/question, you may want to see this thread.
http://forums.adobe.com/thread/826773?tstart=0
eidnolb

How Do You Uninstall "Installer" From The iPhone?

I am selling my iPhone and did a restore from the phone.
It erased everything but Installer.
How do I go about getting it off the iPhone?
Thanks,
Sam
P.S.: I have not done the software update with this iPhone because I didn't want to brick it.

Wow, someone is a kind of uptight.
Anyway, for help with 3rd party apps questions, go to www.macrumors.com
Also, bricking your phone is nothing with software that is now available. You can brick your phone and have it working in less than 10 minutes...

Installation from the MaxDB unicode data base server

First a friendly Hello!
We are newcomers in the SAP-topics.
The following problem occured when installed a Solution Manager SR1 on a MAXDB 7.5 base we the first time .
The central instance of the Solution Manager as unicode version is running on a Ix86 hardware server with SLES 9 Linux.
On another Ix86 server with SLES 9 Linux we tried to get running the MAXDB-Database Instance also as Unicode.
First we have installed the RDBMS Build 28 as Unicode.
After we made accessible the needed DVD as copies on the system we started the sapinst from the kernel-installation DVD.
This process runs, after checking the needed system parameters, up to step 16 the starting of the tasks R3load.
27 tasks run sequentially with messages as : ( copied as example from /tmp/..../sapinst.log )
--->
< ## >
ERROR      2006-03-27 19:43:05 [iaxxbdbld.cpp:1001]
            CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file /tmp/sapinst_instdir/SOLMAN32/WEBAS_ABAP_ADA_UC/DB/SAPAPPL2.lo.
<##>
Therafter sapinst_gui stops with the Options Retry/ View log / stop.
If we view the log-files, we found very many messages as :
<##>
(DB) INFO: connected to DB
Syslog: k xxx :                                                      rscpexcc 11
(rscpsumg) Please look also into "/tmp/sapinst_instdir/SOLMAN32/WEBAS_ABAP_ADA_UC/DB/SAPAPPL2001.xml".
Syslog: k CQ3 : UMGSETTING&                                          rscpexcc 12
(DB) ERROR: DDL statement failed
(CREATE TABLE "/AMCTECH/CICTAD1" ( "MANDT" VARCHAR2(3) UNICODE DEFAULT '000' NOT NULL , "IDENTIFIER" VARCHAR2(100) UNICODE DEFAULT ' ' NOT NULL , "CHANNEL_TYPE" VARCHAR2(2) UNICODE DEFAULT ' ' NOT NULL ) NO FIXE D LENGTH COLUMN )
DbSlExecute: rc = 102
(SQL error -955)
error message returned by DbSl:
Duplicate name:/AMCTECH/CICTAD1
(DB) INFO: /AMCTECH/CICTAD1~0 created
(IMP) INFO: import of /AMCTECH/CICTAD1 completed (0 rows) #20060327162428
<##>
We do not understand why, because we have started on a fresh and clean system.
How can we proceed with the Installation now?
And now the most important question: What are we making wrong?
kindly regards
/MJ

Hi Roland,
we already solved the problem. It was just yesterday so that we have not yet been able to post the solution here. As a matter of fact, it was a combination of different errors like not mounting the DVDs correctly, a messed up MaxDB installtion and stuff like that. So really newbie errors.
Thanks for your answer anyway.
Greetings
/Marc

SALES ORDER: Total of a Field from the Grid in a User-Defined Field in ORDR

Hello!
I created a User-Defined Field called "U_Soma" in table ORDR (Marketing Documents / Title).
I need this U_Soma field Totalize the content of another User-Difined Field called "U_TotalPorUM" created in table RDR1 (Marketing Documents / Rows). It must get the Sum the value of all rows in the current record being edited.
Using the Query below, it works fine with already saved records:
SELECT SUM(T1.[U_TotalPorUM]) FROM ORDR T0 INNER JOIN RDR1 T1 ON T0.DocEntry = T1.DocEntry WHERE T0.DocEntry = $[ORDR.DocEntry]
However, I need that it work with non saved (yet) records.
Thank you!
VALERIO OLIVEIRA
Edited by: ValerioOliveira on Apr 22, 2010 10:14 PM

Gordon, thank you for your fast answers!
In other circumstances I would agree with you.
But the U_Soma field must be used to control the maximum weight of a charge.
It becames very usefull if user can see that the charge limit is reached, still when the Sales Order is being edited.
(The U_TotalPorUM field shows the weight of each item).
I would appreciate any help!
Thanks a lot!
VALERIO OLIVEIRA
Edited by: ValerioOliveira on Apr 23, 2010 7:28 PM

Mini BASIS Installation from the Book ABAP Objects by KELLER & Kruger

Hello People
I have installed the Minibasis CD's and both One by one KERNEL and the DATA.
My system description is as follows:
Intel P4 CPU 2.4 Ghz
256 MB RAM
Microsoft XP Profssional Version 2002
Service Pack 1
Operating system's drive is NTFS system.
MS-SQL is also installed on OS drive.i.e C:/
MiniBASIS
is installed on the E:\ Local Hard Disk with 18.6 GB of free space and FAT32 File System.
I have installed the Minibasis CD's and both One by one KERNEL and the DATA.
Installation of Application Server and Database went off smoothly.Also the SAPgui(frontend).
A new SAPLogon icon also appeared on my desktop.
But after the new entry is created in the SAPlogon....and As soon as i click on the MBS entry created as per the instruction in the Installation procedure I get the following error message screen.
Partner not reached (host localhost, service sapdp00)
Time                Sat Nov 19 18:40:42 2005
Release 46D
Component          NI (network interface)
Version          34
Return Code          -10
Module          ninti.c
Line               1008
Detail               NipConnect2
System Call          SO_ERROR
Error No          10061
Error Text          WSAECONNREFUSED: Connection refused
Counter          1
Help needed please!!!!!!!!
Regards
Vinay

go to C:\WINDOWS\system32\drivers\etc\hosts file
the entry localhost in that file should be pointing to the IP address which you have specified when installing the loopback adapter. (i think as per the documentation it is 10.10.0.10).
modify the host file to the correct IP address and it should work.
<i>MiniBASIS
is installed on the E:\ Local Hard Disk with 18.6 GB of free space and FAT32 File System.</i>
as far as i remember the documentation requires you to have NTFS file system
Regards
Raja

Mini BASIS Installation from the Book ABAP Objects

Hello People
I have installed the Minibasis CD's and both One by one KERNEL and the DATA.
My system description is as follows:
Intel P4 CPU 2.4 Ghz
256 MB RAM
Microsoft XP Profssional Version 2002
Service Pack 1
It is installed on the E:\ Local Hard Disk with 18.6 GB of free space and FAT32 File System.
I have installed the Minibasis CD's and both One by one KERNEL and the DATA.
Installation of Application Server and Database went off smoothly.Also the SAPgui(frontend).
A new SAPLogon icon also appeared on my desktop.
But after the new entry is created in the SAPlogon....and As soon as i click on the MBS entry created as per the instruction in the Installation procedure I get the following error message screen.
Partner not reached (host localhost, service sapdp00)
Time                Sat Nov 19 18:40:42 2005
Release 46D
Component          NI (network interface)
Version          34
Return Code          -10
Module          ninti.c
Line               1008
Detail               NipConnect2
System Call          SO_ERROR
Error No          10061
Error Text          WSAECONNREFUSED: Connection refused
Counter          1
Any soln to this
Regards
Vinay

go to C:\WINDOWS\system32\drivers\etc\hosts file
the entry localhost in that file should be pointing to the IP address which you have specified when installing the loopback adapter. (i think as per the documentation it is 10.10.0.10).
modify the host file to the correct IP address and it should work.
<i>MiniBASIS
is installed on the E:\ Local Hard Disk with 18.6 GB of free space and FAT32 File System.</i>
as far as i remember the documentation requires you to have NTFS file system
Regards
Raja

Trying to download software driver for Novatel u727 mobile broadband card. Keeps saying that it can't be opened because it is from and unidentified developer and my security preferences only allow installation from the Mac App Store .. any suggestions?

Would it help to spend $20 and download the OS X Mountain Lion .. the link send directly from Novatel had Snow Leopard in it .. I haven't owned this laptop for long and have no clue what Mountain Lion or Snow Leopard is
Any help and suggestions would be appreciated

Snow Leopard (10.6) an Lion (10.7) are names for two versions of Apple Operating Systems. Change your System Preferences>Security & Privacy to 'Anywhere' and you should be able to install the driver.
Ciao.

I'm trying to install Windows XP on my Leopard 10.5.8 using Boot Camp Assistant but when it restarts it says I should insert a bootable disk even though I didn't remove the installer from the drive. What should I do?

More info: I'm using an external CD drive because the built-in one doesn't work for some reason.
Also I went back and deleted the partition (also using Boot Camp Assistant) and just gave up on installing XP, but now every time I turn on my macbook I have to press the Option key to mount the Mac HD. If I don't, it returns to the black screen that says I have to insert the bootable disk and press any key. How do I stop this problem? I've already verified the disk and permissions, plus repaired it. It's still the same.

Go into your system preferences and click the startup disk icon then select your Mac HD.

How do you start HTML DB? Just used the installer from the companion disc

Companion disc dated 09/08/2005 - it run fine. HTTP server is also running. It runs in Oracle_home. Instead of the home of my database Oracle_home1. How do I start HTML DB, I don't see any icon for it?
http://yourhostname:7777/pls/htmldb , browsing to this url doesn't work.
Cheers
Message was edited by:
10G-Newbie

10G-Newbie,
Make sure that you can tnsping your Oracle DB. I have installed HTMLDB recently and also couldn't connect to my HTMLDB, only to Oracle HTTP server. However, as soon I got my Oracle networking done correctly, and tnsping to my DB, I also could connect to HTMLDB.
Thank you,
DanielD

Stopping Agents From With the Grid Console

Hello.
We are using Grid COntrol 10.2.0.5.0 to monitor various 10g DBs. I have used blackouts in the past when I do various scheduled maintenance on our DBs. We need to physically relocate our Grid OMS and Repository to another RACK (not RAC). Both the OMS and repository reside on the same server being relocated. I have two questions related to this:
1.) Would blackouts be the best to do in this instance or simply shutting the various DB agents?
2.) Is there a way from the Grid Console to shut down (not black out) more than one agent at a time?
Thank you.
Matt

Blackout would be best because it design in this way. You can stop all agent by creating job host command but you will not get a succ message agent has stop or not so i would recommend go for blackout

A problem for grid control agent installation.

Hi, All:
I am installing EM grid control agent installation in wanted server...
after agent installation and excuting root.sh, OUI start to run automatically Agent Configuration Assistant... then got an error, the reason for error from the log is :
Requesting an Oracle Wallet and Agent Key from the OMS... Failed.
Invalid Agent Registration Password.
The Agent has not been secured.
that means I put wrong agent registration password,
so how can I fix this in the mid way?
thanks a lot in advance.

I tried
emctl secure agent
when prompt for password:
(just type enter, leave it empty)
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.3.0
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Enter Agent Registration password :
Stopping agent...
seems like that process is never ending....
then I typed CTL+C
..............................Failed to stop agent.

Push mass agent installation from the grid.

Similar Messages

Maybe you are looking for