Push settings to users on a mac doesn't seem to work.
I've setup various profiles for devices and users. Settings for ios devices works fine but settings for users on a mac seem to hang indefinetely. IT keeps sending in my profile manager and never seems to be able to push the settings.
I keep getting messages like the following, anyone an idea ?
Aug 17 21:08:21 iserve.ath.cx ruby[458] <Info>: Pruning certificate chain to 18446744073709551615
Aug 17 21:08:21 iserve.ath.cx ruby[458] <Debug>: Trying to add a bogus certificate
Aug 17 21:08:21 iserve.ath.cx ruby[458] <Debug>: An error occured while inserting an untrusted certificate into the chain
All mac's have the trusted certificate installed and are enrolled.
I have no clue how to solve this.
Arno
Sure - thanks for your help.
Jan 18 14:44:20 server.mydomain.com ProfileManager[9359] <Info>: ServermgrDevicemgr starting...
Jan 18 14:44:20 server.mydomain.com ProfileManager[9359] <Info>: default_profile_created_at_least_once was already true
Jan 18 14:44:20 server.mydomain.com ProfileManager[9359] <Warning>: ** has_many_polymorphs: Warning; not all usage scenarios for polymorphic scopes are supported yet.
Jan 18 14:44:20 server.mydomain.com ProfileManager[9359] <Info>: ServermgrDevicemgr done!
Jan 18 15:04:43 server.mydomain.com ProfileManager[532] <Info>: DemandProcess: running with arguments '-e production'
Jan 18 15:04:45 server.mydomain.com ruby[532] <Info>: Pruning certificate chain to 18446744073709551615
Jan 18 15:04:45 server.mydomain.com ruby[532] <Debug>: Trying to add a bogus certificate
Jan 18 15:04:45 server.mydomain.com ruby[532] <Debug>: An error occured while inserting an untrusted certificate into the chain
Jan 18 15:04:45 server.mydomain.com ProfileManager[532] <Info>: Pushed to <LabSession:'MyUsername@ComputerImUsing'> with token sxXIeO/L4l/Pwa/1McJu83m048GBa+xH2SR+KRF1Xds=, {"time":"1358521484.604173","mdm":""}
Jan 18 15:04:50 server.mydomain.com ProfileManager[532] <Warning>: ** has_many_polymorphs: Warning; not all usage scenarios for polymorphic scopes are supported yet.
Jan 18 15:04:51 server.mydomain.com ProfileManager[532] <Warning>: ** has_many_polymorphs: Warning; not all usage scenarios for polymorphic scopes are supported yet.
Jan 18 15:04:51 server.mydomain.com ruby[532] <Info>: Pruning certificate chain to 18446744073709551615
Jan 18 15:04:51 server.mydomain.com ruby[532] <Debug>: Trying to add a bogus certificate
Jan 18 15:04:51 server.mydomain.com ruby[532] <Debug>: An error occured while inserting an untrusted certificate into the chain
Jan 18 15:04:51 server.mydomain.com ProfileManager[532] <Info>: Pushed to <LabSession:'MyUsername@ComputerImUsing'> with token sxXIeO/L4l/Pwa/1McJu83m048GBa+xH2SR+KRF1Xds=, {"time":"1358521491.205980","mdm":""}
Jan 18 15:09:51 server.mydomain.com ProfileManager[532] <Info>: DemandProcess: quitting after 300 seconds of inactivity
This is the computer that I'm playing with, just assigning it to myself in the profile manager, which causes the profile to be 'pushed' supposedly, and obviously.
Thanks again.
Similar Messages
-
Has anyone else had problems getting used to their mouse and how the clicks work or don't work on the internet? I click and it doesn't automatically do what I click on. So frustrating!
Hi ndearborn0273!
This is most likely just a settings issue with your mouse that you are able to change through the System Preferences. I have an article for you that can help you set this back to default, and that article can be found right here:
Mac Basics: Set your preferences
http://support.apple.com/kb/ht2490
Specifically, you will want to pay close attention to this section of that article:
Customize your mouse
The Mouse preferences pane looks different depending on what kind of mouse you use. These settings let you set the sensitivity of the mouse to control how fast the pointer moves across your screen when you move your mouse, and adjust for your double-click reflexes. Other controls may be available, depending on the type of mouse you're using.
Open System Preferences.
Choose View > Mouse, or simply click Mouse.
To control how fast the pointer (cursor) moves across your screen when you move the mouse, click Point & Click and use the Tracking slider to adjust speed.
If Double-Click Speed appears, you can use the Double-Click slider to adjust speed.
If your mouse has a scroll wheel, you can use the Scrolling slider to adjust speed.
To change gesture settings, click the More Gestures tab. You can enable and disable gestures for swipe and Mission Control.
Judging by your post, I believe your secondary click setting is set to use the left side of the mouse. The default set up for a former Windows user to be most comfortable would be having the secondary click set to the right side of the mouse, as is shown in the picture I have inserted above. Note that these settings will be explained by the little video on the right hand side of this window as you hover over the description of the action on the left hand side.
Thanks for using the Apple Support Communities!
Cheers,
Braden -
I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer." I have tried to update my settings, but this doesn't seem to work. Any help would be much appreciated
Hard Drive: The Hard Drive is on my camera (Sony Handycam)
Just needed some info on what is going on with your particular system.
Knowing the exact camera model will also assist us.
If this camera is standard AVCHD you should be able to connect with USB to Mac with FCE open and use Log and Transfer without all the fiddling around converting etc.
What FCE does during ingest is convert files to AIC. (Apple Intermediate Codec)
FCE cannot read the individual files in the BDMV folder, that's why all the converting is required when you use that method.
BTW: regards formatting drives/cards/memory on cameras; it is wise to use the actual device to format rather than a computer. This is a prime cause of read/write goof ups with solid state media. This applies to still or video cameras.
Keeping the COMPLETE card/memory structure in tact is vital for successful transfers.
Try here for some trouble shooting tips:
https://discussions.apple.com/message/12682263#12682263
Al -
I have Adobe Design Standard CS6 purchased 2013 with serial number but cannot find to download it onto a new mac laptop. When I try and add the 24-digit serial number to my account it doesn't seem to work?
CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html -
My mac Doesn't seem to see my external hard drive (seagate 1tb) I have it usb'd in to the back of my computer, but when I open time machine...it does not see it. Help...please
Yes...at least I thought it was....I have 10.6.8.
That's the whole issue. I want to run/install photoshop elements but I have to have 10.8. for that. So...be fore I install an upgrade (Yosemite is getting BAD press) I thought I'd check my back up...it's not there...I have the seagate plugged in and the usb into the back of the mac...when I try to turn the time machine "ON" it says airport device not found not ....
By the way...I REALLY appreciate the help here.... -
can someone tell me why a standard microphone doesn't seem to work with a mac-mini? Is there another kind of microphone I need to use?
Most microphone output a low voltage signal that must be put through a preamp.
The computer needs to have a line voltage signal level instead.
Allan -
Pdfmark code in MS Word 2008 doc doesn't seem to work properly to create Named Destination
Hi all,
I've been having trouble with creating Preview-compatible Named Destinations in Acrobat 9.x (see http://forums.adobe.com/thread/770470?tstart=0). Distiller, on the other hand, appears to create compatible Destinations, so as a last-ditch effort, I tried to go back to my original source file (Microsoft Word 2008 document) to use Distiller's pdfmark functionality, to see if maybe I could finally get a PDF with Preview-compatible Destinations.
Following instructions found elsewhere on this forum, I went into Word and inserted the following field into a test location in my document:
PRINT "[ /Dest /testdest /View [ /XYZ null null null ] /DEST pdfmark"
This field code is supposed to then cause a pdfmark to be inserted into the resulting PostScript and/or PDF files. Distiller is supposed to understand this and turn it into a Named Destination called "testdest." However, it doesn't seem to work - I don't see the pdfmark code in the PS file, and the PDF file doesn't have any Named Destinations in it.
I'm using Acrobat 9.x on Mac OS X 10.6.5, so I tried this two different ways:
1) Using the "Print to Adobe PDF" workflow (which replaced the "Adobe PDF Printer" from previous OS/Acrobat versions) - this automatically generates a PDF via (presumably) an API call to Distiller... and
2) Using the "Print to Postscript" workflow to generate a PS file, which I then ran through Adobe Distiller.
In neither case did I end up with a named destination in the PDF file, as I was supposed to. In case #2, even the Postscript file didn't have a pdfmark embedded in it. Thus, I'm assuming that perhaps this is particular issue may be a problem with MS Word 2008 rather than with Acrobat... but I'm hoping someone might have a clue as to how to fix it.
I welcome ideas on how to get Word 2008 to properly output pdfmark code, so that Distiller will pick it up and properly embed a Named Destination into the PDF...
Thanks in advance.
(If anyone has ideas about the Preview-compatible problem, linked above, that would also be great!)You're suggesting that it was never fixed from Word 2004 to 2008? Possibly. I wonder if it's fixed in Word 2011? Anyone know? But is it really a Word problem, rather than a Distiller issue?
I appreciate your offer, though I do have access to Word on Windows (2003, I think), so I could try Distilling there... I only worry about formatting, since there are minor differences (e.g. font kerning, etc.) between Mac and Windows that are subtle, but sufficient to create formatting issues for very long documents (e.g. pushing figures onto the wrong pages, etc.). That would be a rather big problem.
The question remains whether this is an issue with Word or Distiller, though... and whether it's fixed in Distiller X and/or Word 2011.
Adobe, care to comment?
I'd really love to find a proper Mac solution, if one exists... it would be rather a slap to Mac users if a solution doesn't exist. -
Soft and hard reset for time machine doesn't seem to work does anyone have suggestions?
I have tried to use a soft reset according to the language on the apple site by using a pin to push the button for a second even up to a minute but it doesn't seem to work. Does anyone have any suggestions for either a hard or soft reset? I did get a new router Netgear wireless extreme thus I'm only using the time capsule portion instead of the wireless router.
Tell us what happens when you press in the reset.. you should feel the switch click.. but don't press too hard or you will break the plastic lever arm.
Connect the TC directly to the Mac by ethernet and open airport utility.
Can it find the TC.. if so you can do a factory reset from the utility instead. If it cannot find it.. try again with the reset.. you need to hold in reset for about 10-15 sec. The front led will begin to flash rapidly. Release it at that point. -
I'm travelling and trying to back up my new iPhone to iCloud. I have sufficient storage, am connected to wifi and it's plugged into a power source and yet it doesn't seem to work at all. I'm currently in India. Could that be the cause or can anyone suggest any reason why this wouldn't work?
"gets stuck" - are there any error messages?
If you get the error "Backup not successful" and you've tried deleting the last backup and trying to back up manually without luck, try the following test: Go to...
Settings>iCloud>Storage & Backup>manage Storage, tap your device name in the Backups section, then look under Backup options. Turn off all apps from backup and then do a manual backup. If that doesn't work, then this post will not help. If the backup works, then go back to the app list and turn some on and try another backup. If successful, keep repeating these steps. If it fails at some point, then try to zero in on the one app that seems to make the backup fail. (I had this problem and found one app failing, probably due to a corrupt data file.)
This process will take time, but if a backup works with no app data being used but clearly fails with the original settings, then somewhere in the mix of apps is a "bad" one. -
Hi I'm running Addressbook and cannot clear previous entry easily when searching my data base of around 5,000 contacts.
I prefer to view in All contacts on a double page spread with details on the right page. Searching doesn't seem to work correctly in this view.
It's always the second search that is problematic.
I've tried typing over and all it seems to do is confine the search to the the entries that have come up for the previous search.
I've tried to use the x to clear the previous entry and then type the next search, same problem. The only way seems to be to move from "All Contacts" to "Groups". Then the searched name appears and I can return to All Contacts to see full details.
Surely three key press' are not the way it's supposed to work?
FYI
Processor 2.7 GHz Intel Core i7
Memory 8 GB 1333 MHz DDR3
Graphics Intel HD Graphics 3000 512 MB
Software Mac OS X Lion 10.7.3 (11D50d)
Address book Version 6.1 (1083)
MacBook Pro, Mac OS X (10.7.1), 8Mb RAM 2.7Ghz i7AddressBook experts are here:
https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion#/?tagSet=1386 -
My Iphone has a problem with the microphone it doesn't seem to work! so there for i can't use Siri anymore.. this has been playing up for some time now. But as my wife & I had a baby 7 Months ago I have not found the time to pop in to the apple store until today (8/12/13) and they told me that they couldn't help as it's out of it's warranty by 57 days
Can antone help me? is there something i can do, apart from buying a new iphone!Have you got Siri turned on in settings/general/restrictions?
-
Can a use a partitioned external hard drive to create a disk image? I tried, doesn't seem to work using disk manager.
OK, it's very bad computing to use a backup disk for anything but a backup. The reason being is if/when the HD crashes you will have lost not only all your backup but the data files. While I commend you for wanting redundant backup, you really need separate EHDs for doing so. Format each EHD using Disk Utility to Mac OS Extended (Journaled) using the GUID parttition. When you connect, OS X will ask if you want to use that drive as a Time Machine backup drive, select yes and then let it backup. On the second EHD format the same way however do not use TM as a backup, this time I'd suggest an app such as SuperDuper or Carbon Copy Cloner to make a clone of the internal HD. Leave both EHDs connected and TM will backup new or changed files automatically on a hourly basis. The clone you will need to set to backup on the schedule you want. For example I have my SuperDuper EHD set to backup only changed or updated files at 2AM every day.
The advantage of a clone is that if the computers internal HD crashes you can boot from a clone and continue working, TM will not do that but it's great for keeping an archive of all files. So if you want a version of a file from many months ago, TM will help you locate and restore it. -
Version : 11.2.0.3
Platform : Oracle Linux 6.3
oraenv doesn't seem to work as shown below. I haven't set ORACLE_SID in the .bash_profile as this server is going to have multiple DBs in future. So, I need to use oraenv script to set env variables.
Trying to source oraenv file.
$ . oraenv
ORACLE_SID = [oracle] ?
Ideally, it should prompt the SID listed in /etc/oratab file. So, in this case it should be something like
$ . oraenv
ORACLE_SID = [oracle] ? GRCFMS
Here are the contents of my /etc/oratab file and .bash_profile
# su - oracle
$
$
$
$
$
$
$ whoami
oracle
$ pwd
/home/oracle
$ cat .bash_profile
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
#PATH=$PATH:$HOME/bin
#export PATH
export ORACLE_BASE=/u01/app/oracle
export ORACLE_HOME=/u01/app/oracle/product/11.2.0.3/dbhome_1
#export LD_LIBRARY_PATH=$ORACLE_HOME/lib
export PATH=$PATH:$ORACLE_HOME/bin:/usr/bin:/bin
$
My oratab file
$ cat /etc/oratab
# This file is used by ORACLE utilities. It is created by root.sh
# and updated by either Database Configuration Assistant while creating
# a database or ASM Configuration Assistant while creating ASM instance.
# A colon, ':', is used as the field terminator. A new line terminates
# the entry. Lines beginning with a pound sign, '#', are comments.
# Entries are of the form:
# $ORACLE_SID:$ORACLE_HOME:<N|Y>:
# The first and second fields are the system identifier and home
# directory of the database respectively. The third filed indicates
# to the dbstart utility that the database should , "Y", or should not,
# "N", be brought up at system boot time.
# Multiple entries with the same $ORACLE_SID are not allowed.
GRCFMS:/u01/app/oracle/product/11.2.0.3/dbhome_1:N
$
$
$Max wrote:
Version : 11.2.0.3
Platform : Oracle Linux 6.3
oraenv doesn't seem to work as shown below. I haven't set ORACLE_SID in the .bash_profile as this server is going to have multiple DBs in future. So, I need to use oraenv script to set env variables.
Trying to source oraenv file.
$ . oraenv
ORACLE_SID = [oracle] ?
Ideally, it should prompt the SID listed in /etc/oratab file. So, in this case it should be something like
$ . oraenv
ORACLE_SID = [oracle] ? GRCFMS
Here are the contents of my /etc/oratab file and .bash_profile
# su - oracle
$
$
$
$
$
$
$ whoami
oracle
$ pwd
/home/oracle
$ cat .bash_profile
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
#PATH=$PATH:$HOME/bin
#export PATH
export ORACLE_BASE=/u01/app/oracle
export ORACLE_HOME=/u01/app/oracle/product/11.2.0.3/dbhome_1
#export LD_LIBRARY_PATH=$ORACLE_HOME/lib
export PATH=$PATH:$ORACLE_HOME/bin:/usr/bin:/bin
$
My oratab file
$ cat /etc/oratab
# This file is used by ORACLE utilities. It is created by root.sh
# and updated by either Database Configuration Assistant while creating
# a database or ASM Configuration Assistant while creating ASM instance.
# A colon, ':', is used as the field terminator. A new line terminates
# the entry. Lines beginning with a pound sign, '#', are comments.
# Entries are of the form:
# $ORACLE_SID:$ORACLE_HOME:<N|Y>:
# The first and second fields are the system identifier and home
# directory of the database respectively. The third filed indicates
# to the dbstart utility that the database should , "Y", or should not,
# "N", be brought up at system boot time.
# Multiple entries with the same $ORACLE_SID are not allowed.
GRCFMS:/u01/app/oracle/product/11.2.0.3/dbhome_1:N
$
$
$
if in fact you did exactly as posted above, the su - oracle established a new process which knows nothing about the previous invocation of oraenv
BTW - never use OS "root" when dealing with Oracle DB -
SetDocument doesn't seem to work correctly
I'm obviously using the setDocument method for my JTextField incorrectly, but how? The DocumentSizeFilter works correctly, allowing only the number of characters I specify, but the DigitDocument.insertString(...) doesn't seem to work at all (it should allow for only digits to be entered into the JTextField).
AbstractDocument doc;
pafTextField = new JTextField();
pafTextField.setDocument(new DigitDocument());
pafTextField.setPreferredSize(new Dimension(30, height));
doc = (AbstractDocument)pafTextField.getDocument();
doc.setDocumentFilter(new DocumentSizeFilter(2));The DigitDocument class:
public class DigitDocument extends PlainDocument{
public DigitDocument(){
super();
public void insertString(int offs, String str, AttributeSet a) throws BadLocationException, NumberFormatException{
try{
System.out.println("String str = " + str);
int i = Integer.parseInt(str);
super.insertString(offs, str, a);
catch(NumberFormatException e){
// do nothing because a user input was not a digit
Toolkit.getDefaultToolkit().beep();
}the DocumentSizeFilter code:
http://java.sun.com/docs/books/tutorial/uiswing/components/example-1dot4/DocumentSizeFilter.javadidn't try the abstract doc, but why not combine the two
something like this
import java.awt.*;
import javax.swing.*;
import javax.swing.text.*;
class Testing extends JFrame
public Testing()
setLocation(400,300);
setDefaultCloseOperation(EXIT_ON_CLOSE);
JTextField tf = new JTextField(new DigitDocument(2),"",10);
JPanel p = new JPanel();
p.add(tf);
getContentPane().add(p);
pack();
public static void main(String[] args){new Testing().setVisible(true);}
class DigitDocument extends PlainDocument{
int maxChars;
public DigitDocument(int chars){
super();
maxChars = chars;
public void insertString(int offs, String str, AttributeSet a) throws BadLocationException, NumberFormatException{
try{
System.out.println("String str = " + str);
if(this.getLength()+str.length() > maxChars) throw new NumberFormatException();//<----
int i = Integer.parseInt(str);
super.insertString(offs, str, a);
catch(NumberFormatException e){
// do nothing because a user input was not a digit
Toolkit.getDefaultToolkit().beep();
} -
after setting up iCloud for my iPhone and iPad, syncing the calendars to my desktop PC, via USB and iTunes, doesn't seem to work. What's going on?
Regarding the USB, see if zapping the PRAM helps.
Regarding your storage space check out the following:
HD Space Checkers:
Disk Inventory X (FREE)
WhatSize (SHAREWARE)
OmniDiskSweeper (FREE)
GrandPerspective (FREE - donation)
Mac Performance Guide
Slimming your hard drive
===============
Quick fix How To Quickly Free Up Hard Drive Space on Mac OS
http://www.youtube.com/watch?v=fO-mlLApEuk
Maybe you are looking for
-
How to delete values from extension collection field through importer?
Hi Experts, We have created one extension collection field in Master Agreement. We are able to add values to that collection field using Extension collection template CSV file through importer. Now we have a requirement to delete values from the Exte
-
Error :- while accessing JMS topic messages in Design Studio
Hi, Am getting this error while clicking update button in Design Studio to populate a dataobject using JMS Topic messages sent by oracle Bpel manager. IMessageSourceReceiver->messageReceive: javax.naming.NoInitialContextException: Cannot instantiate
-
Problem with attachtment XLS (last column of the xls)
Hi, iam working on interface in which i will be sending an email along with attachtment where my email along with attachtment are working perfectly ,the problem is with the XLS where the last column of the XLS is taking 255 char which is the length o
-
Severe error in the log file of App Server 8.1 PE
Hi, I have installed the JWSDP 1.6 with my App Server 8.1 PE and i found an error that i could not solve. The error message reads "EJB Webservice security configuration Failure com.sun.enterprise.security.jauth.AuthException at com.sun.enterprise.sec
-
Media Core Importer Process / ImporterProcessServer.exe crash
The project that I'm working on is standard def but it is an hour and half long. Its a training DVD with 12 modules totalling 100 minutes. I have had a problem that has been getting continually worse. Today I hit the brick wall and can't seem reco