Push technology - where to begin

would like windows application to be noftified of specific database events without having to poll the sever with a timer event or to select from a table to check for the presence of records. Is this possible?
just need pointed in the right direction....
Thanks,
Ron Music

Thanks for the prompt response - it is appreciated...However, what I need is to have the database software "help" a process "find" its way back to interested client/clients via (IP address, connection name, etc...) much like producer/consumer model of AQ. This process could post a message to the message queue to fire an event or pop up a message box, etc...
Is this possible???
Thanks again,
Ron Music

Similar Messages

Where to begin in Oracle?

Hello everyone,
I am interested in obtaining an Oracle certification but do not know where to begin. I am new to this but I work with Access so I do have an understanding of databases. I spoke with someone recently and was told to learn Linux. The person was very vague in giving out any information on the subject (he acted like I was trying to break into Fort Knox). I would really appreciate it if someone could just point me into the right direction and help me get started. I know Oracle and Access are totally different but I am ready to put in the work to obtain this incredible certification. I am going to do this on my own because I cannot afford to attend any boot camps, Oracle classes, or community colleges. I have posted this question on many so called Oracle forums but know one is willing to respond to my question. Can anyone out there help?
Thanks,
bdthomas02

I am trying to get the OCA certificationI assume in my reply below that you are referring to 1Z0-042 - Oracle Database 10g: Administration I (10g DBA OCA).
I spoke with an Oracle rep and she informed me that the classroom requirement does not apply to this certificationThat's correct. You need it only when you clear the second exam (1Z0-043).
1. Can I pass the exam by purchasing materials from a book store, Oracle website, or other suggested sources?The best source would be Oracle Training Material (Student Guides**). However, I do recommend "Oracle Database 10g OCP Certification All-In-One Exam Guide". I used this reference to clear the exams.
Oracle Database 10g OCP Certification All-In-One Exam Guide
http://www.amazon.com/Oracle-Database-Certification-Guide-Handbook/dp/0072257903
** Oracle Student Guides/ILT (Instructor Led Training) Materials
Re: Student Guides
Practice exams provide tools to help you improve and continue your exam preparation:
Oracle Certification Program - Practice Test Page
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=208
Sample Questions – 1Z0-042 Oracle Database 10g: Administration I
http://www.oracle.com/global/us/education/certification/sample_questions/exam_1z0-042.html
2. Do I need to know Linux in order to pass the exam (someone told me unless I know Linux I would not be able to understand the commands)?It is not necessary. See the following link for the exam topics:
Oracle Database 10g: Administration I
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=41&p_exam_id=1Z0_042
3. Since I do not know anything about Oracle how should I study for the exam and how long will it take to be able to pass the exam?You need to practice and work hard since you are new to Oracle. Arrange to install Oracle 10gR2 database, practice the installation, and try to cover all the topics which are listed in the link referenced above.
You can download Oracle 10gR2 database from:
Oracle Database Software Downloads
http://www.oracle.com/technology/software/products/database/index.html
Please let us know if you need any further clarification.

How to use server push technology

I need to write a Chatroom by using Server-push technology. Who would like to offer some information about this technology for me? Thanks!!

Define "server-push" technology.client-pull is where the client pulls, via a specific request, information from the server.
Server-push is where the server pushes information to a client when that information becomes available. The client does not initiate the exchange.

I was given an assingment, but have no idea where to begin. The assingment is to create a text file using notepad with all of my digital inputs and some how make those imputs show up on my digital indicators on my control pannel

I was given an assingment, but have no idea where to begin. The assingment is to create a text file using notepad with all of my digital inputs and some how make those imputs show up on my digital indicators on my control pannel.
When it was explained to me it didn't sound to hard of a task, I have no LabVIEW experience and the tutortial sucks.

StevenD: FYI, I did NOT give you the one star rating. I would never do that!
StevenD wrote:
Ow. Someone is grumpy today.
Well, this is an assignment, so it is probably homework.
Why else would anyone give HIM such an assigment, after all he has no LabVIEW experience and the tutorials are too hard for him?
This would make no sense unless all of it was just covered in class!
This is not a free homework service with instant gratification.
OK! Let's do it step by step. I assume you already have a VI with the digital indicators.
"...but have no idea where to begin".
open notepad.
decide on a format, possibly one line per indicator.
type the document.
close notepad.
open LabVIEW.
Open the existing VI with all the indicators.
(are you still following?)
look at the diagram.
Who made the program?
Does the code make sense so far?
Is it a statemachine or just a bunch of crisscrossed wires?
Where do you want to add the file read?
How should the file be read (after pressing a read button, at the start of the program ,etc.)
See how far you get!
Message Edited by altenbach on 06-24-2008 11:23 AM
LabVIEW Champion . Do more with less code and in less time .

I bought my MacBook Pro in 2010. This is the first Mac I have owned and recently it is having some difficulty loading we pages, often timing out. This Mac environment is entirely different for me and I am not sure where to begin troubleshooting/clean-up.

I bought my MacBook Pro in 2010. This is the first Mac I have owned and recently it is having some difficulty loading we pages, often timing out. This Mac environment is entirely different for me and I am not sure where to begin troubleshooting and/ or clean-up. I have moderate computer skills and try not to download or access questionable material, however recently I visited the Ap Store and purchased a couple of different aps to use in record keeping and for making a flyer. I am not even sure how to remove these programs to see if it helps.
Any tips or tricks are appreciated.
Thank you!

Time to see about the PRAM battery.
By the way iOS and OS X are different systems.
iOS is the operating system for iPads, iPhones, and iPod touch.
Mac OS X is the operating system for Mac labelled computers.

Where to begin with Solaris?

I'm interested in exploring Solaris and not quite sure where to begin. Currently running Ubuntu 12.04 on a dual-quad core Intel Xeon, which version of Solaris will work best?

Hi there,
you might want to grab a copy of the Open Solaris Bible (OpenSolaris Bible: Nicholas A. Solter, Jerry Jelinek, David Miner: 9780470385487: Amazon.com: Books) which, while being a little outdated, gives a quite decent jump start into the matter. Then install Solaris - should be piece of cake if you know Linux - and simply start comparing to what you know from Linux. Alternatively, if you don't have access to Solaris, go for OpenIndiana (http://openindiana.org), which is a true descendant of Sun's former open source variant, OpenSolaris. The operating system is free, the community is friendly, and you learn quite a lot you can take with you when you start using 'real' Solaris.
Cheers
Stevie

Hi, I have been trying to update many things on my 2009 white macbook. Everytime I do it tells me I need a different version. I don't know what versions I need or even where to begin or if I need to purchase new hardware? Any suggestions?

Hi, I have been trying to update many things on my 2009 white macbook. Everytime I do it tells me I need a different version. I don't know what versions I need or even where to begin or if I need to purchase new hardware? It says my version is 10.5.8. I have tried downloading 10.6 but not sure what to do. Everyone else seems to be updating there's and mine is way behind however it still tells me I have no software updates...Any suggestions?

You have to understand the difference between an Update and an Upgrade.
An Update is a free change to add to the base code or as a bug fix within an existing Operating System. Such as the .8 added to 10.5.
An Upgrade is a complete new Operating System that must be purchased. Such as 10.5 Leopard to 10.6 Snow Leopard.
10.5 Leopard was based on Power PC code and was written to be able to run on both Power PC and Intel processors.
10.6 Snow Leopard has completely rewritten code and only runs on Intel Macs.
10.7 Lion used some 32 bit which allows it to run on Late 2006 through Early 2008 MacBooks and a lot of 64 bit code.
10.8 Mountain Lion is pure 64 bit, which excludes more systems than Lion did. It's not something you can add memory to, for example, as it involves the base architecture.

Is minidv dead? I don't know where to begin

My minidv camera is in need of repair. I'm not sure yet what it's going to cost, but I decided to take a quick look at buying a new minidv camera. It would appear that minidv is at its last gasp, and I don't know where to begin in searching for a new camera. Here are some of my questions/thoughts:
1) This is just a hobby for me and I'm on a tight budget.
2) I have hundreds of hours of footage stored on minidv tape. I've already imported and edited 75% of that footage, but I still want to keep the original unedited footage for future projects.
3) As I'm looking at some newer cameras, I see that they come in 480 vs. 1,080 lines of resolution. Would I be correct that 1,080 equals HD?
4) If I buy an HD camera, what are the implications of mixing that footage with my minidv footage?
5) I don't have a clue what to do with flash vs. disc storage type cameras. . .All the acronyms are foreign to me. What are the implications of these formats . . .especially as it pertains to bringing the footage into FCP?
6) Along that same line of thought, do these newer cameras store the footage with some kind of compression that will lose its quality when I import it into FCP?
Maybe there's a link to an article that will make this simpler for me. There's just too much out there and I don't know where to begin.
Thanks!

1) OK
2) OK
3) Yes, SD is 480 pixels high; HD is either 720 or 1080 pixels high (currently).
4) Implications of mixing? Well you have options. You could leave each as they are, it would be much like watching TV where you often see SD footage during the course of an HD program. Or you could down-convert the HD footage to SD for editing and delivery.
5) With card based recording devices, you'd "Log & Import" rather than "Log & Capture" as you do with tape. The real long term implications with card based recording, you have no back up of the footage like tape provides. So you'd need to purchase a lot of cards to keep a backup - or lots of hard drive space to store backups.
6) Yes, almost all digital formats record using a compression algorithm. Even DV is compressed 5:1 when recorded to tape.
If you want to stay with MiniDV (since this is a hobby for you), you may want to consider purchasing a used tape-based camera for now.
-DH

Where to begin? Troubleshooting.

My contact button:
on (release) {
getURL("mailto:[email protected]");
Works on 7 of 8 tested machines. All the PCs are set up the
same (Windows XP)
Any idea of where to begin to figure out why it doesn't work
on the 8th machine?
Any help would be appreciated.

Thanks for responding.
Sorry, no, I can't share the file -- internal proprietary web
site. Can I send an attachment through here? (a dummy-downed
version)
From what I've looked at so far, all the settings are the
same (the computers are set up by IT, so they should be the same)
I had originally tested the files on the other computers
while the html, etc. were on our file server.
When I put it on the test area of the web server, it worked
on my machine.
Any Ideas?

Help with where to begin creating a custom GUI?

Links to good tutorials helpful.
Basically I have never created a GUI for java beyond your basic text box, radio button, button etc.
I need to create a GUI using custom images for the buttons, images etc. I kind of don't know where to begin since all I have done prior is create a GUI with functionality already present in java. I need drop down menus etc.
Any help is appreciated.

All of this functionality that you are mentioning is available with Swing. You can do a google search for java Swing tutorials; if you need further help, please visit the Swing forum.

Custom Muse Widgets - Where to Begin?

I am an experienced coder; I have coded for Drupal for years and other platforms, and have been a web developer since 2000.
My preface is that I would gladly make widgets and share them, but I have NO clue where to start! Muse is a fantastic tool, and with Business Catalyst has drastically cut coding time down to almost none - I can just focus on the design.
I want to contribute to the community, but creating widgets is a mystery. I see websites like Musegrid having custom widgets for sell; heck, I would GIVE mine away - IF I just knew where to begin.
Regards,
- John

That was super simple! Thanks so much; I am now signed up.
It would be awesome if they had some sort of "widget" builder. With JS snippets and a CSS browser, sort of like Dreamweaver has. I would happily contribute.

Push-Technology Support for Exchange - and for Mac OS X Server - users?

To have support and compatibility for using push-email, -calendaring and -address books updating with Microsoft Exchange Server 2007 is very much appreciated. But how about small enterprises who so far relied in Leopard Server and seek for similar push technologies in conjunction with the iPhone? I am not a professional but can push-email, -calendaring and -address books updating with the current state of Leopard Server? If not, does Apple plan to integrate a solution? If yes, when?

We're all just your fellow users here and have no insight into Apple's future plans. You can submit your comment and suggestion to Apple through their feedback pages:
http://www.apple.com/feedback/

HT4972 I need to update my Iphone but I don't know where to begin. The phone is plugged into my computer so where do I go now??? Thanks for your help!!

I need to update my Iphone but I don't know where to begin. The phone is plugged into my computer, but I
don't know what to do after that. Thanks for any help!!

Before updating, import all you photos to your computer (see http://support.apple.com/kb/HT4083) and back up your contacts (by syncing them with iCloud or another service such as Google, with a supported application such as Outlook or Address Book, or using an app like My Contacts Backup. Then open iTunes, click on the name of your phone on the left side, go to the Summary tab to the right and click on Check for Update.

JDBC Driver woes!!! Where to begin????

Ok... I started out by reading the basic jdbc sun tutorial. But I am not sure where to begin in terms of connecting to a database... driver-wise that is. Does jdk1.5 come with a driver? Or do I have to download 1. I have an access database that I would loev to connect to. I also have that same database on a local php server as a mySql database. Please someone aid me in finding out where to turn or recommending a driver that I can download

What? Real newbie here. That's obvious. But you said you read the tutorial. That should have given you more information than you seem to possess.
Could you break down what you
said a little bit more please. Who is my database
vendor? I am using Microsoft Access db's and mySql's
databases.Let's see - Microsoft and MySQL are the vendors.
What should I download exactly and what is the string
argument I should provide to the Class.forName(...)Like I said, you can use the bridge driver to connect to Access.
You need to download the MySQL JDBC JAR here:
http://dev.mysql.com/downloads/connector/j/3.1.html
Put that JAR in your app's CLASSPATH.
You should put the name of the driver class in the call to Class.forName(). The docs will make it clear.
%

Where to begin in EP

Hi all,
I am very much new to EP. I was doing java programming one year before. But currently I am working on dotnet technologies.
Now my firm is gonna implement EP 6.0
Can any one suggest me from where should i start learning?
Kindly list down the basic requirements to move up fast.
Thanks in advance
Cheers
Shobin

Hi You can Start learning using the following easy way:
A simple Demo for the EP Lanscape Architechure,Portal Content Architechture& configurations,Basic Content object like iviews, pages, worksets, roles, Diffr between EP5.0 and EP6.0 is explained here u just have to use ur ear plugs and hear the session. And also a simple Quiz to check ur understandings at last
1) https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9801b8f9-0701-0010-3f98-bceb17f62a4f
2) https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/5f99129d-0701-0010-ab85-bc43ac86ba7c
http://help.sap.com/saphelp_nw04s/helpdata/en/a4/76bd3b57743b09e10000000a11402f/frameset.htm
For portal concepts and overview you can start with the link below:
http://help.sap.com/saphelp_nw04/helpdata/en/a4/76bd3b57743b09e10000000a11402f/frameset.htm
For EP development, you can start by accessing the online help for EP developers. This is a part of the portal documentation.
http://help.sap.com/saphelp_nw04/helpdata/en/19/4554426dd13555e10000000a1550b0/content.htm
SAP developer's guide
https://www.sdn.sap.com/irj/sdn/developersguide
https://www.sdn.sap.com/irj/sdn/devguide2004s
Cheers,
Javed.

Push technology - where to begin

Similar Messages

Maybe you are looking for