Push windows trusted root certificate to adobe trusted store/certificate
Hi,
Can we push windows trusted root certificate to adobe trusted store/certificate ?
Regards,
Nitin Harikant
I have tried something similar by trying to import the Windows Cert Store into Adobe, but I never did have it work. I just recently found the option is XI for Adobe to look at the Windows store itself.
XI: Edit > Preferences > Signature > (Verification) More... > (Windows Integration) Check Validating Signatures, Check validating Certified Documents
It should happen right away; although I will note I am having issues with this working for Non-Admins on a Terminal Server. Might be a privilege issue.
If you want to set via GPO:
Key Path: Software\Adobe\Adobe Acrobat\11.0\Security\cASPKI\cMSCAPI_DirectoryProvider
Value Name: iMSStoreTrusted
Value Type: Reg_DWORD
Value Data: 62, or 60 (Hex)
Link: Digital Signatures
Similar Messages
-
Adobe Reader plugin certificate cost
Hello,
I was said that I have to buy a special certificate if I create a plugin for Adobe Reader, while I have not if I create a plugin for Acrobat.
I would like to know how much does it cost.
Thanks in advance.The details of the cost and the licensing procedure are in the Acrobat SDK under Reader IKLA (integration key license agreement).
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Mon, 24 Oct 2011 07:24:36 -0700
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Adobe Reader plugin certificate cost
Adobe Reader plugin certificate cost
created by DevAcro<http://forums.adobe.com/people/DevAcro> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/3987400#3987400 -
My computer was hacked three days ago and malware installed. After consultation with Apple Support I reinstalled the OS and all seemed to be well. Today I tried to set some Preferences but my Admin password wouldn't work. I tried to reset it using my Apple ID, to no avail. Checking in Keychain Access I found that under System, my Certificate contains a message: 'This root certificate is not trusted'.
DO NOT install "Avast." I asked about it as a possible cause of the problem, not as a solution.
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(1309 ' 0.5 0.25 50 1000 15 5120 1000 25000 6 6 5 1 0 100 ' 51 25600 4 10 25 5120 102400 1000 25 1536 500 40 500 300 85 25 20480 262144 20 2000 524288 604800 5 1024 25 50 );k=({Soft,Hard}ware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts Displays PCI UniversalAccess InstallHistory ConfigurationProfile AirPort 'com\.apple\.' -\\t N\\/A 'AES|atr|udit|msa|dnse|ax|ensh|fami|FileS|fing|ft[pw]|gedC|kdu|etS|is\.|alk|ODSA|otp|htt|pace|pcas|ps-lp|rexe|rlo|rsh|smb|snm|teln|upd-[aw]|uuc|vix|webf' OSBundle{Require,AllowUserLoa}d 'Mb/s:Mb/s:ms/s:KiB/s:%:total:MB:total:lifetime:sampled:per sec' 'Net in:Net out:I/O wait time:I/O requests:CPU usage:Open files:Memory:Mach ports:Energy:Energy:File opens:Forks:Failed forks:System errors' 'tsA|[ST]M[HL]' PlistBuddy{,' 2>&1'}' -c Print' 'Info\.plist' CFBundleIdentifier );f=('\n%s'{': ','\n\n'}'%s\n' '\nRAM details\n%s\n' %s{' ','\n'{"${k[22]}",}}'%s\n' '%.1f GiB: %s\n' '\n ...and %d more line(s)\n' '\nContents of %s\n '"${k[22]}"'mod date: %s\n '"${k[22]}"'size (B): %d\n '"${k[22]}"'checksum: %d\n%s\n' );c=(879294308 4071182229 461455494 216630318 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 2636415542 3694147963 1233118628 2456546649 2806998573 2778718105 842973933 1383871077 1591517921 676087606 1445213025 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 3374894509 1051159591 892310726 1707497389 523110921 2883943871 3873345487 );s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[4]} ' s/:$//;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[9]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of|yc/!{ s/^.+is |\.//g;p;q;} ' ' BEGIN { FS="\f";if(system("A1 42 83 114")) d="^'"${k[21]}"'launch(d\.peruser\.[0-9]+|ctl\.(Aqua|Background|System))$";} { if($2~/[1-9]/) { $2="status: "$2;printf("'"${f[4]}"'",$1,$2);} else if(!d||$1!~d) print $1;} ' ' $1>1{$NF=$NF" x"$1} /\*/{if(!f)f="\n\t* Code injection"} {$1=""} 1;END{print f} ' ' NR==2&&$4<='${p[7]}'{print $4} ' ' BEGIN{FS=":"} ($1~"wir"&&$2>'${p[22]}') {printf("wired %.1f\n",$2/2^18)} ($1~/P.+ts/&&$2>'${p[19]}') {printf("paged %.1f\n",$2/2^18)} ' '/YLD/s/=/ /p' ' { q=$1;$1="";u=$NF;$NF="";gsub(/ +$/,"");print q"\f"$0"\f"u;} ' ' /^ {6}[^ ]/d;s/:$//;/([^ey]|[^n]e):/d;/e: Y/d;s/: Y.+//g;H;${ g;s/ \n (\n)/\1/g;s/\n +(M[^ ]+)[ -~]+/ (\1)/;s/\n$//;/( {8}[^ ].*){2,}/p;} ' 's:^:/:p;' ' !/, .+:/ { print;n++;} END{if(n<'{${p[12]},${p[13]}}')printf("^'"${k[21]}"'.+")} ' '|uniq' ' 1;END { print "/L.+/Scr.+/Templ.+\.app$";print "/L.+/Pri.+\.plugin$";if(NR<'{${p[14]},${p[21]}}') print "^/[Sp].+|'${k[21]}'";} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p;' '&&echo On' '/\.(bundle|component|framework|kext|mdimporter|plugin|qlgenerator|saver|wdgt|xpc)$/p' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".","");print $0"$";} END { split("'"${c[*]}"'",c);for(i in c) print "\t"c[i]"$";} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/((iTu|ok).+dle|\.(component|mailbundle|mdimporter|plugin|qlgenerator|saver|wdgt|xpc))$/p;' ' BEGIN{ FS="= "} $2 { gsub(/[()"]/,"",$2);print $2;} !/:/&&!$2{print "'${k[23]}'"} ' ' /^\//!d;s/^.{5}//;s/ [^/]+\//: \//p;' '>&-||echo No' '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[2]}'{$2=$2-1;print}' ' BEGIN { M1='${p[16]}';M2='${p[18]}';M3='${p[8]}';M4='${p[3]}';} !/^A/{next};/%/ { getline;if($5<M1) o["CPU"]="CPU: user "$2"%, system "$4"%";next;} $2~/^disk/&&$4>M2 { o[$2]=$2": "$3" ops/s, "$4" blocks/s";next;} $2~/^(en[0-9]|bridg)/ { if(o[$2]) { e=$3+$4+$5+$6;if(e) o[$2]=o[$2]"; errors "e"/s";next;};if($4>M3||$6>M4) o[$2]=$2": in "int($4/1024)", out "int($6/1024)" (KiB/s)";} END { for(i in o) print o[i];} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' BEGIN{FS=": "} /^ {10}O/ {exit} /^ {0,12}[^ ]/ {next} $1~"Ne"&&$2!~/^In/{print} $1~"Si" { if(a[2]) next;split($2,a," ");if(a[1]-a[4]<'${p[5]}') print;};$1~"T"&&$2<'${p[20]}'{print};$1~"Se"&&$2!~"2"{print};' ' BEGIN { FS="\f";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1;} ' ' BEGIN { split("'"${p[1]}"'",m);FS="\f";} $2<=m[$1]{next} $1==9||$1==10 { "ps -c -ouid -p"$4"|sed 1d"|getline $4;} $1<11 { o[$1]=o[$1]"\n "$3" (UID "int($4)"): "$2;} $1==11&&$5!~"^/dev" { o[$1]=o[$1]"\n "$3" (UID "$4") => "$5" (status "$6"): "$2;} $1==12&&$5 { "ps -c -ocomm -p"$5"|sed 1d"|getline n;if(n) $5=n;o[$1]=o[$1]"\n "$5" => "$3" (UID "$4"): "$2;} $1~/1[34]/ { o[$1]=o[$1]"\n "$3" (UID "$4", error "$5"): "$2;} END { n=split("'"${k[27]}"'",u,":");for(i=n+1;i<n+4;i++)u[i]=u[n];split("'"${k[28]}"'",l,":");for(i=1;i<15;i++) if(o[i])print "\n"l[i]" ("u[i]")\n"o[i];} ' ' /^ {8}[^ ]/{print} ' ' BEGIN { L='${p[17]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"stat -f%z "F|getline S;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${k[30]}"' "F|getline g) { l++;if(l<=L) f=f"\n "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n '"${k[22]}"'"T;printf("'"${f[8]}"'",F,D,S,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' 's/^.{52}(.+) <.+/\1/p' ' /id: N|te: Y/{i++} END{print i} ' ' /kext:/ { split($0,a,":");p=a[1];k[S]='${k[25]}';k[U]='${k[26]}';v[S]="Safe";v[U]="true";for(i in k) { s=system("'"${k[30]}"'\\ :"k[i]" \""p"\"/*/I*|grep -qw "v[i]);if(!s) a[1]=a[1]" "i;};if(!a[2]) a[2]="'"${k[23]}"'";printf("'"${f[4]}"'",a[1],a[2]);next;} !/^ *$/ { p="'"${k[31]}"'\\ :'"${k[33]}"' \""$0"\"/*/'${k[32]}'";p|getline b;close(p);if(b~/ .+:/||!b) b="'"${k[23]}"'";printf("'"${f[4]}"'",$0,b);} ' '/ en/!s/\.//p' ' NR>=13 { gsub(/[^0-9]/,"",$1);print;} ' ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?'${k[32]}'$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ / [VY]/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' '/^find: /!p;' ' /^p/{ s/.//g;x;s/\nu/'$'\f''/;s/(\n)c/\1'$'\f''/;s/\n\n//;p;};H;' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;p;' ' s/^.+ |\(.+\)$//g;p;' '1;END{if(NR<'${p[15]}')printf("^/(S|usr/(X|li))")}' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END{ if(i>1)print n} ' s/{'\.|jnl: ','P.+:'}'//;s/ +([0-9]+)(.+)/\2'$'\t\t''\1/p' ' /es: ./{ /iOS/d;s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/://;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(B2|[my]): /H;d;:0'$'\n'' x;/[my]: [AM]|m: I.+p$|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' 's/$/'$'\f''(0|-(4[34])?)$/p' '|sort'{'|uniq'{,\ -c},\ -nr} ' s/^/'{5,6,7,8,9,10}$'\f''/;s/ *'$'\f'' */'$'\f''/g;p;' 's/:.+$//p' '|wc -l' /{\\.{kext,xpc,'(appex|pluginkit)'}'\/(Contents\/)?'Info,'Launch[AD].+'}'\.plist$/p' 's/([-+.?])/\\\1/g;p' 's/, /\'$'\n/g;p' ' BEGIN{FS="\f"} { printf("'"${f[6]}"'",$1/2^30,$2);} ' ' /= D/&&$1!~/'{${k[24]},${k[29]}}'/ { getline d;if(d~"t") print $1;} ' ' BEGIN{FS="\t"} NR>1&&$NF!~/0x|\.([0-9]{3,}|[-0-9A-F]{36})$/ { print $NF"\f"a[split($(NF-1),a," ")];} ' '|tail -n'{${p[6]},${p[10]}} ' s/.+bus /Bus: /;s/,.+[(]/ /;s/,.+//p;' ' { $NF=$NF" Errors: "$1;$1="";} 1 ' ' 1s/^/\'$'\n''/;/^ +(([MNPRSV]|De|Li|Tu).+|Bus): .|d: Y/d;s/:$//;$d;p;' ' BEGIN { RS=",";FS=":";} $1~"name" { gsub(/["\\]/,"",$2);print $2;} ' '|grep -q e:/' '/[^ .]/p' '{ print $1}' ' /^ +N.+: [1-9]/ { i++;} END { if(i) print "system: "i;} ' ' NF { print "'{admin,user}' "$NF;exit;} ' ' /se.+ =/,/[\}]/!d;/[=\}]/!p ' ' 3,4d;/^ +D|Of|Fu| [0B]/d;s/^ |:$//g;$!H;${ x;/:/p;} ' ' BEGIN { FS=": ";} NR==1 { sub(":","");h="\n"$1"\n";} /:$/ { l=$1;next;} $1~"S"&&$2!~3 { getline;next;} /^ {6}I/ { i++;L[i]=l" "$2;} END { if(i) print h;for(j=0;j<'${p[24]}';j++) print L[i-j];} ' ' /./H;${ x;s/\n//;s/\n/, /g;/,/p;} ' ' {if(int($6)>'${p[25]}')printf("swap used %.1f\n",$6/1024)} ' ' BEGIN{FS="\""} $3~/ t/&&$2!~/'{${k[24]},${k[29]}}'/{print $2} ' ' int($1)>13 ' p ' BEGIN{FS="DB="} { sub(/\.db.*/,".db",$2);print $2;} ' {,1d\;}'/r%/,/^$/p' ' NR==1{next} NR>11||!$0{exit} {print $NF"\f"substr($0,1,32)"\f"$(NF-7)} ' '/e:/{print $2}' ' /^[(]/{ s/....//;s/$/:/;N;/: [)]$/d;s/\n.+ ([^ ]+).$/\1/;H;};${ g;p;} ' '1;END { exit "find /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom -mtime -'${p[23]}'s"|getline;} ' ' NR<='${p[26]}' { o=o"\n"$0;next;} { o="";exit;} END{print o|"sed 1d"} ' ' {o=o"\n"$0} NR==6{p=$1*$5} END{if(p>'${p[27]}'*10^6)print o|"sed 1d"} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab kextfind top pkgutil "${k[30]}\\" echo cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin' env pluginkit scutil 'dtrace -q -x aggsortrev -n' security sed\ -En awk 'dscl . -read' networksetup mdutil lsof test osascript\ -e netstat mdls route cat uname powermetrics codesign lockstat );c2=(${k[21]}loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'" 'L*/Ca*/'${k[21]}'Saf*/E* -d 2 -name '${k[32]} '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' -i '-nl -print' '-F \$Sender -k Level Nle 3 -k Facility Req "'${k[21]}'('{'bird|.*i?clou','lsu|sha'}')"' "-f'%N: %l' Desktop {/,}L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message CRne '0xdc008012|(allow|call)ing|Goog|(mplet|nabl)ed|ry HD|safe b|succ|xpm' -k Message CReq 'bad |Can.t l|corru|dead|fail|GPU |hfs: Ru|inval|Limiti|v_c|NVDA[(]|pa(gin|us)|Purg(ed|in)| err|Refus|s ful|TCON|tim(ed? ?|ing )o|trig|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o%cpu,comm,ruid' "' syscall::recvfrom:return {@a[execname,uid]=sum(arg0)} syscall::sendto:return {@b[execname,uid]=sum(arg0)} syscall::open*:entry {@c[execname,uid,copyinstr(arg0),errno]=count()} syscall::execve:return, syscall::posix_spawn:return {@d[execname,uid,ppid]=count()} syscall::fork:return, syscall::vfork:return, syscall::posix_spawn:return /arg0<0/ {@e[execname,uid,arg0]=count()} syscall:::return /errno!=0/ {@f[execname,uid,errno]=count()} io:::wait-start {self->t=timestamp} io:::wait-done /self->t/ { this->T=timestamp - self->t;@g[execname,uid]=sum(this->T);self->t=0;} io:::start {@h[execname,uid]=sum(args[0]->b_bcount)} tick-10sec { normalize(@a,2560000);normalize(@b,2560000);normalize(@c,10);normalize(@d,10);normalize(@e,10);normalize(@f,10);normalize(@g,10000000);normalize(@h,10240);printa(\"1\f%@d\f%s\f%d\n\",@a);printa(\"2\f%@d\f%s\f%d\n\",@b);printa(\"11\f%@d\f%s\f%d\f%s\f%d\n\",@c);printa(\"12\f%@d\f%s\f%d\f%d\n\",@d);printa(\"13\f%@d\f%s\f%d\f%d\n\",@e);printa(\"14\f%@d\f%s\f%d\f%d\n\",@f);printa(\"3\f%@d\f%s\f%d\n\",@g);printa(\"4\f%@d\f%s\f%d\n\",@h);exit(0);} '" '-f -pfc /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f'$'\f''%Sc'$'\f''%N -t%F {} \;' '/S*/*/Ca*/*xpc*' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' /\ kMDItemContentTypeTree=${k[21]}{bundle,mach-o-dylib} :Label "/p*/e*/{auto*,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {/p*,/usr/local}/e*/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*{,/*} .launchd.conf" list '-F "" -k Sender hidd -k Level Nle 3' /Library/Preferences/${k[21]}alf\ globalstate --proxy '-n get default' vm.swapusage --dns -get{dnsservers,info} dump-trust-settings\ {-s,-d,} '~ "kMDItemKind=Package"' '-R -ce -l1 -n5 -o'{'prt -stats prt','mem -stats mem'}',command,uid' -kl -l -s\ / '--regexp --files '${k[21]}'pkg.*' '+c0 -i4TCP:0-1023' ${k[21]}dashboard\ layer-gadgets '-d /L*/Mana*/$USER' '-app Safari WebKitDNSPrefetchingEnabled' '-Fcu +c0 -l' -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' '-F \$Message -k Sender kernel -k Message CReq "'{'n Cause: -','(a und|I/O |gnment |jnl_io.+)err|disk.+abo','USBF:.+bus'}'"' -name\ kMDItem${k[33]} -T\ hfs '-n get default' -listnetworkserviceorder :${k[33]} :CFBundleDisplayName $EUID {'$TMPDIR../C ','/{S*/,}'}'L*/{,Co*/*/*/L*/}{Cache,Log}s -type f -size +'${p[11]}'M -exec stat -f%z'$'\f''%N {} \;' \ /v*/d*/*/*l*d{,.*.$UID}/* '-app Safari UserStyleSheetEnabled' 'L*/A*/Fi*/P*/*/a*.json' users/$USER\ HomeDirectory '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' ' -F "\$Time \$(Sender): \$Message" -k Sender Rne "launchd|nsurls" -k Level Nle 3 -k Facility R'{'ne "user|','eq "'}'console" -k Message CRne "[{}<>]|asser|commit - no t|deprec|done |ect pas|fmfd|Goog|ksho|ndum|obso|realp|rned f|/root|sandbox ex" ' getenv '/ "kMDItemDateAdded>=\$time.now(-'${p[23]}')&&kMDItem'${k[33]}'=*"' -m\ / '' ' -F "\$Time \$(RefProc): \$Message" -k Sender Req launchd -k Level Nle 3 -k Message Rne "asse|bug|File ex|hij|Ig|Jet|key is|lid t|Plea|ship" ' print{,-disabled}\ {system,{gui,user}/$UID} '-n1 --show-initial-usage --show-process-energy' -r ' -F "\$Message" -k Sender nsurlstoraged -k Time ge -1h -k Level Nle 4 -k Message Req "^(ER|IN)" ' '/A* -type d -name *.app -prune ! -user 0' -vv '-D1 -IPRWck -s5 sleep 1' );N1=${#c2[@]};for j in {0..20};do c2[N1+j]=SP${k[j]}DataType;done;l=({Restricted\ ,Lock,Pro}files POST Battery {Safari,App,{Bad,Loaded}\ kernel,Firefox}\ extensions System\ load boot\ args FileVault\ {2,1} {Kernel,System,Console,launchd}\ log SMC Login\ hook 'I/O per process' 'High file counts' UID {System,Login,Agent,User}\ services\ {load,disabl}ed {Admin,Root}\ access Font\ issues Firewall Proxies DNS TCP/IP Wi-Fi 'Elapsed time (sec)' {Root,User}\ crontab {Global,User}' login items' Spotlight Memory\ pressure Listeners Widgets Parental\ Controls Prefetching Nets Volumes {Continuity,I/O,iCloud,HID,HCI}\ errors {User,System}\ caches/logs XPC\ cache Startup\ items Shutdown\ codes Heat Diagnostic\ reports Bad\ {plist,cache}s 'VM (GiB)' Bundles{,' (new)'} Trust\ settings Activity Free\ space Stylesheet Library\ paths{,' ('{shell,launchd}\)} Data\ packages Modifications );N3=${#l[@]};for i in {0..8};do l[N3+i]=${k[5+i]};done;F() { local x="${s[$1]}";[[ "$x" =~ ^([\&\|\<\>]|$) ]]&&{ printf "$x";return;};:|${c1[30]} "$x" 2>&-;printf "%s \'%s\'" "|${c1[30+$?]}" "$x";};A0() { Q=6;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo -v;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;date '+Start time: %T %D%n';printf '\n[Process started]\n\n'>&4;printf 'Revision: %s\n\n' ${p[0]};};A1() { local c="${c1[$1]} ${c2[$2]}";shift 2;c="$c ` while [[ "$1" ]];do F $1;shift;done`";((P2))&&{ c="sudo $c";P2=;};v=`eval "$c"`;[[ "$v" ]];};A2() { local c="${c1[$1]}";[[ "$c" =~ ^(awk|sed ) ]]&&c="$c '${s[$2]}'"||c="$c ${c2[$2]}";shift 2;local d=` while [[ "$1" ]];do F $1;shift;done`;((P2))&&{ c="sudo $c";P2=;};local a;v=` while read a;do eval "$c '$a' $d";done<<<"$v";`;[[ "$v" ]];};A3(){ v=$((`date +%s`-v[3]));};export -f A1 A2 F;B1() { v=No;! ((v[1]))&&{ v=;P1=1;};};eval "`type -a B1|sed '1d;s/1/2/'`";B3(){ v[$1]="$v";};B4() { local i=$1;local j=$2;shift 2;local c="cat` while [[ "$1" ]];do F $1;shift;done`";v[j]=`eval "{ $c;}"<<<"${v[i]}"`;};B5(){ v="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d$'\e' <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F$'\e' ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`egrep -v "${v[$1]}"<<<"$v"|sort`;};eval "`type -a B7|sed '1d;s/7/8/;s/-v //'`";C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { B4 0 0 63&&C1 1 $1;};C4() { echo $'\t'"Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};C5() { sudo -k;pbcopy<<<"$o";printf '\n\tThe test results are on the Clipboard.\n\n\tPlease close this window.\n';exit 2>&-;};for i in 1 2;do eval D$((i-1))'() { A'$i' $@;C0;};';for j in 2 3;do eval D$((i+2*j-3))'() { local x=$1;shift;A'$i' $@;C'$j' $x;};';done;done;trap C5 2;o=$({ A0;D0 0 N1+1 2;D0 0 $N1 1;B1;C2 31;B1&&! B2&&C2 32;D2 22 15 63;D0 0 N1+2 3;D0 0 N1+15 17;D4 3 0 N1+3 4;D4 4 0 N1+4 5;D4 N3+4 0 N1+9 59;D0 0 N1+16 99;for i in 0 1 2;do D4 N3+i 0 N1+5+i 6;done;D4 N3+3 0 N1+8 71;D4 62 1 10 7;D4 10 1 11 8;B2&&D4 18 19 53 67;D2 11 2 12 9;D2 12 3 13 10;D2 13 32 70 101 25;D2 71 6 76 13;D2 45 20 52 66;A1 7 77 14;B3 28;A1 20 31 111;B6 0 28 5;B4 0 0 110;C2 66;B2&&D0 45 90 124;D4 70 8 15 38;D0 9 16 16 77 45;C4;B2&&D0 35 49 61 75 76 78 45;B2&&{ D0 28 17 45;C4;};B2&&{ A1 43 85 117;B3 29;B4 0 0 119 76 81 45;C0;B4 29 0 118 119 76 82 45;C0; };D0 12 40 54 16 79 45;D0 12 39 54 16 80 45;D4 74 25 77 15&&{ B4 0 8 103;B4 8 0;A2 18 74;B6 8 0 3;C3 75;};B2&&D4 19 21 0;B2&&D4 40 10 42;D2 2 0 N1+19 46 84;D2 44 34 43 53;D2 59 22 20 32;D2 33 0 N1+14 51;for i in {0..2};do A1 29 35+i 104+i;B3 25+i;done;B6 25 27 5;B6 0 26 5;B4 0 0 110;C2 69;D2 34 21 28 35;D4 35 27 29 36;A1 40 59 120;B3 18;A1 33 60 121;B8 18;B4 0 19 83;A1 27 32 39&&{ B3 20;B4 19 0;A2 33 33 40;B3 21;B6 20 21 3;};C2 36;D4 50 38 5 68;B4 19 0;D5 37 33 34 42;B2&&D4 46 35 45 55;D4 38 0 N1+20 43;B2&&D4 58 4 65 76 91;D4 63 4 19 44 75 95 12;B1&&{ D4 53 5 55 75 69&&D4 51 6 58 31;D4 56 5 56 97 75 98&&D0 0 N1+7 99;D2 55 5 27 84;D4 61 5 54 75 70;D4 14 5 14 96;D4 15 5 72 96;D4 17 5 78 96;C4;};D4 16 5 73 96;A1 13 44 74 18;C4;B3 4;B4 4 0 85;A2 14 61 89;B4 0 5 19 102;A1 17 41 50;B7 5;C3 8;B4 4 0 88;A2 14 24 89;C4;B4 0 6 19 102;B4 4 0 86;A2 14 61 89;B4 0 7 19 102;B5 6 7;B4 0 11 73 102;A1 42 86 114;j=$?;for i in 0 1 2;do ((i==2&&j==1))&&break;((! j))||((i))||B2&&A1 18 $((79+i-(i+53)*j)) 107+8*j 94 74||continue;B7 11;B4 0 0 11;C3 $((23+i*(1+i+2*j)));D4 $((24+i*(1+i+2*j))) 18-4*j 82+i-16*j $((112+((3-i)*i-40*j)/2));done;D4 60 4 21 24;D4 42 14 1 62;D4 43 37 2 90 48;D4 41 10 42;D2 48 36 47 25;A1 4 3 60&&{ B3 9;A2 14 61;B4 0 10 21;B4 9 0;A2 14 62;B4 0 0 21;B6 0 10 4;C3 5;};D4 9 41 69 100;D2 72 21 68 35;D2 49 21 48 49;B4 4 22 57 102;A1 21 46 56 74;B7 22;B4 0 0 58;C3 47;D4 54 5 7 75 76 69;D4 52 5 8 75 76 69;D4 57 4 64 76 91;D2 0 4 4 84;D2 1 4 51 84;D4 21 22 9 37;D0 0 N1+17 108;D4 76 24 38;A1 23 18 28 89;B4 0 16 22 102;A1 16 25 33;B7 16;B4 0 0 34;D1 31 47;D4 64 4 71 41;D4 65 5 87 116 74;C4;B4 4 12 26 89 23 102;for i in {0..3};do A1 0 N1+10+i 72 74;B7 12;B4 0 0 52;C3 N3+5+i;((i))||C4;done;A1 24 22 29;B7 12;B3 14;A2 39 57 30;B6 14 0 4;C3 67;A1 24 75 74;B4 1 1 122||B7 12;B4 0 0 123;B3 23;A2 39 57 30;B6 23 0 4;C3 68;B4 4 13 27 89 65;A1 24 23;B7 13;C3 73;B4 4 0 87;A2 14 61 89 20;B4 0 17;A1 26 50 64;B7 17;C3 6;A1 4 88;D5 77 44 89;D4 7 11 6;D0 0 N1+18 109;A3;C2 39;C4;} 4>&2 2>/dev/null;);C5
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
Part 1 of 8 done at … sec
Part 8 of 8 done at … sec
The test results are on the Clipboard.
Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
ICloud caldav server root certificate no longer trusted os x 10.10 yosemite
Hi folks,
after upgrading to OS X 10.10 Yosemite I had errors with all iCloud syncing applications, be it calendar, reminders, etc. I found that this is because my former iCloud server p05-caldav.icloud.com is no longer trusted as the trusted root certificates changed form OS X 10.9 Mavericks to OS X 10.10 Yosemite. The root certificate with the corresponding serial 927650371 number can be found in Mavericks but no longer in Yosemite. Will there be an upgrade of the caldav server or how can I change my Internet Account configuration to point to another server that is trusted. I am hesitant to put a no longer trusted root certificate in my certificate store. Thank you.
OS X Yosemite: List of available trusted root certificates
OS X Mavericks: List of available trusted root certificates
19.10.14 22:19:37,518
CalendarAgent[572]
[com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=NSURLErrorDomain Code=-1202 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “p05-caldav.icloud.com” which could put your confidential information at risk." UserInfo=0xchangedbyme {NSLocalizedRecoverySuggestion=Would you like to connect to the server anyway?, _kCFStreamErrorDomainKey=3, NSErrorPeerCertificateChainKey=(
"<SecCertificate 0x7fb3e091cca0 [0x7fff770d5cf0]>",
"<SecCertificate 0x7fb3e09d01d0 [0x7fff770d5cf0]>",
"<SecCertificate 0x7fb3dbf6a170 [0x7fff770d5cf0]>"
), NSErrorClientCertificateStateKey=0, NSErrorFailingURLKey=https://[email protected]/changedbyme/principal///[email protected]/changedbyme/principal/, NSErrorFailingURLStringKey=https://[email protected]/changedbyme/principal///[email protected]/changedbyme/principal/, CalDAVErrFromRefresh=YES, NSUnderlyingError=0x7fb3dbcf7e10 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “p05-caldav.icloud.com” which could put your confidential information at risk.", _kCFStreamErrorCodeKey=-9812, AccountName=iCloud, NSURLErrorFailingURLPeerTrustErrorKey=<SecTrust 0x7fb3dbf28bb0 [0x7fff770d5cf0]>, NSLocalizedDescription=The certificate for this server is invalid. You might be connecting to a server that is pretending to be “p05-caldav.icloud.com” which could put your confidential information at risk.}]Nope. Failed. Same way.
Log:
2014-12-16 15:59:57 -0500 [I] IM: ---------- log start ----------
2014-12-16 15:59:57 -0500 [I] IM: All install checks pass
2014-12-16 16:00:11 -0500 [I] IM: User does not have any processes that need to be closed before the Flash Player can be installed.
2014-12-16 16:00:11 -0500 [I] IM: [install started]
installer: Package name is Adobe Flash Player
installer: Certificate used to sign package is not trusted. Use -allowUntrusted to override.
2014-12-16 16:00:14 -0500 [I] IM: [install completed]
2014-12-16 16:00:14 -0500 [E] IM: [install failed]
2014-12-16 16:00:32 -0500 [E] RA: Unable to execute privileged task '/Library/Application Support/Adobe/Flash Player Install Manager/fpsaud'
2014-12-16 16:00:32 -0500 [I] IM: ---------- log end ---------- -
I created an app object for my trusted root cert that only contains the key
HKEY_CURRENT_USER\Software\Microsoft\SystemCertifi cates\Root\ProtectedRoots.
If I associate it with the Root of the tree, users only, then it works fine
if it's put in the start menu or in App Explorer.
However, I want to Force Run/Run once this so that users don't have to
"install" it. When I make it force run, (and leave the "Show Progress" up),
I don't see it distribute (which may be because it's only one Key, and
happening too fast) but more importantly, it doesn't work. It doesn't add
the trusted root, and I still get cert errors on my SSL Pages.
When do User keys get distributed? Do I have to manually run this app in
order to get the User Key to import into the reg? If not, What can I do to
track down why this isn't working on Force Run, but IS working when I
double click it.This what you mean?
AXT_FILE 3.1
[Application Name]
Value=Trusted Root Certificate
[Application Caption]
Value=Trusted Root Certificate
[Macro]
Name=SOURCE_PATH
Value=\\hsis1\apps\Trusted Root Certificate
[Application Path]
Value=c:\windows\notepad.exe
[Application Flags]
Flag=Install Only
Flag=No Distribution Window
[Application Platform]
Flag=Windows 95
Flag=Windows NT
[Registry Key Create]
Flag=Write Always
Key=HKEY_CURRENT_USER\Software
[Registry Key Create]
Flag=Write Always
Key=HKEY_CURRENT_USER\Software\Microsoft
[Registry Key Create]
Flag=Write Always
Key=HKEY_CURRENT_USER\Software\Microsoft\SystemCer tificates
[Registry Key Create]
Flag=Write Always
Key=HKEY_CURRENT_USER\Software\Microsoft\SystemCer tificates\Root
[Registry Key Create]
Flag=Write Always
Key=HKEY_CURRENT_USER\Software\Microsoft\SystemCer tificates\Root\ProtectedRoots
[Filter OS Version]
Type=Windows 95
Major Version=-1
Minor Version=-1
Revision Version=-1
Build Version=-1
Flag=Greater Than or Equal
[Filter OS Version]
Type=Windows NT
Major Version=-1
Minor Version=-1
Revision Version=-1
Build Version=-1
Flag=Greater Than or Equal
[Registry Value Create]
Type=Binary
Flag=Write Always
Flag=Always Distribute Setting
Key=HKEY_CURRENT_USER\Software\Microsoft\SystemCer tificates\Root\ProtectedRoots
Name=Certificates
Length=44
Value=18 00 00 00 01 00 00 00 70 9F 63 6D CC 25 C7 01
Value=01 00 00 00 18 00 00 00 AC E4 03 D8 03 DE 10 06
Value=14 ED 97 E6 04 0B 0B 4B C5 C0 8D 92
[Application Association Flags]
Flag=Launcher
[Application Distribution Rules]
File=DIRU0029.XML
Show Icon=0 -
Root certificate is not trusted
Hi!
I have installed the internatlly signed certificates according to steps in the Oracle documentation, however, I still ge the error that "This CA Root certificate is not trusted. To enable trust, install this certificate in the Trusted Root Certification Authorities store".
Below is the error I receive when starting UCM server:
<27-Dec-2011 13:39:18 o'clock CET> <Notice> <Security> <BEA-090898> <Ignoring th
e trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=
(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=V
eriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certi
ficate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object
: 1.2.840.113549.1.1.11.>
I get this error when I click on the certificate in the browser. Below are the steps I performed. Can anyone help me understand, perhaps, I import my certificates incorrectly?
1. I've created a custom keystore using the following command:
keytool -genkey -alias mykey -keyalg RSA -keysize 2048 -dname “CN=<domain name like test.com etc>, OU=<unite like Customer Support etc>, O=<your organization>, L=<your location>, ST=<state>, C=<country code like US>” -keystore identity.jks
2. Next, I generated a certificate sign-in request using this command:
keytool -certreq -alias mykey -file cert.csr -keystore identity.jks
3. After I received three certificates signed in by our internatl authority, main, intermediate, root. I imported each one of them.
4. I inserted those one by one into my custom store generated during step1 first. I used the following command for each certificate:
keytool -import -trustcacerts -keystore mystore.jks -storepass password -alias Root -import -file Trustedcaroot.txt
5.I also inserted all three into JAVA_HOME cacerts file, located on C:/Program Files/Java/jrockit.../jre/lib/security/cacerts using the same command as in step 4.
Next, I configured UCM_server 1 KEYSTORE to use Custom Identity and Java Trust. and pointed Custom Identity to my custom keystore file created in step1 and Java Trust to cacerts file updated in step5.
Despite of all steps above I cannot get the certificates to work. When I look at the certificate, it tells me that "This CA Root certificate is not turested. To enable trust, install this certificate in the Trusted Root Certification Authorities store".
Edited by: 867498 on 27-Dec-2011 05:45I've managed to get rid of the error, however the certificate still does not reflect the trusted chain and doesn't point to the "Root" certificate. Any ideas?
-
Having 2 Certificate Authority Trust Root Certificates
I have two domains that share a one way trust. Domain A has the CA server. The CA server certificate expires in 2015 so I went ahead and renewed. Now when I go into the properties of the CA, it lists under the General tab, Certificate #0 which expires
in 2015 and Certificate #1 which expires in 2019.
On Domain B, I can not get out the the CA's site to install the Trusted Root CA so I have to download them manually from a server in Domain A and then copy them to the server in Domain B.
On Domain B server, I noticed I can now get to the CA's site when I import Certificate #0 which expires in 2015 and my SCOM agent can now communicate to Domain A. But if I only import Certificate #1, I still can not get out to the CA's site and my SCOM agent
still can not communicate to Domain A.
Why does Certificate #0 work and not #1?Both agent and MS need to trust the same CA.
Jonathan Almquist | SCOMskills, LLC (http://scomskills.com) -
Hi all ,
I would like to know about the trust store and trust root certificates . Please let me know why we have to use these certificates and in which scenario it could be helpful?Hi All,
Please help me in advise for my query.
Thanks,
Sriram -
Install Trusted Root Certification certificate using ZCM
Trying to figure out how to install into Trusted Root Certification Authorities a certificate for a local server. We have several that we created local certificates and want to prevent the users from geting the error message or having to do the steps to import.
Has anyone accomplished this? Its very possible I am just way over thinking it, so feel free to wack me in the head if so...
MattUse Microsofts CertMgr.exe from a bundle.
On 1/20/2014 4:56 PM, medust wrote:
>
> Trying to figure out how to install into Trusted Root Certification
> Authorities a certificate for a local server. We have several that we
> created local certificates and want to prevent the users from geting the
> error message or having to do the steps to import.
>
> Has anyone accomplished this? Its very possible I am just way over
> thinking it, so feel free to wack me in the head if so...
>
>
> Matt
>
> -
Hello
My subca certificate was about to expire so I renewed it with the same key and since then my wireless will not connect. I get the following error from NPS:
Network Policy Server denied access to a user.
Contact the Network Policy Server administrator for more information.
User:
Security ID:
AD\4411CB8CD34A2AA$
Account Name:
host/4411CB8CD34A2AA.ad.***.org
Account Domain:
AD
Fully Qualified Account Name:
AD\4411CB8CD34A2AA$
Client Machine:
Security ID:
NULL SID
Account Name:
Fully Qualified Account Name:
OS-Version:
Called Station Identifier:
f4-1f-c2-e6-0e-40:***-private
Calling Station Identifier:
e0-06-e6-c2-96-b7
NAS:
NAS IPv4 Address:
10.0.2.85
NAS IPv6 Address:
NAS Identifier:
DOM-WLC1
NAS Port-Type:
Wireless - IEEE 802.11
NAS Port:
13
RADIUS Client:
Client Friendly Name:
NPS Proxy 1
Client IP Address:
10.0.2.12
Authentication Details:
Connection Request Policy Name:
Wireless Clients
Network Policy Name:
Wireless Clients
Authentication Provider:
Windows
Authentication Server:
DOM-DC1.ad.****.org
Authentication Type:
EAP
EAP Type:
Microsoft: Smart Card or other certificate
Account Session Identifier:
Logging Results:
Accounting information was written to the local log file.
Reason Code:
295
Reason:
A certification chain processed correctly, but one of the CA certificates is not trusted by the policy provider.
How do i make the policy provider trust this new certificate that was created? When i renewed the certificate everything looks good on the subca and root ca. The new certificate is not in the nps servers so i tried manually importing it and that still did
not work. I noticed when i open the wireless network policy properties under constraints and open the Microsoft: Smart Card or other certificate eap type the new certificate is not in there. Any suggestions? Thank you!can you copy client certificate to NPS server and run the following command against this certificate:
certutil -verify -urlfetch path\clientcert.cer
and show us the output.
Vadims Podāns, aka PowerShell CryptoGuy
My weblog: en-us.sysadmins.lv
PowerShell PKI Module: pspki.codeplex.com
PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
Check out new: SSL Certificate Verifier
Check out new:
PowerShell File Checksum Integrity Verifier tool. -
Windows 7 computers show a Valid Trust Anchor warning message when connecting to corporate wireless
We are currently using EAP-TLS Microsoft:Smart Card or certificates" as the Authentication Method on our Radius/NPS server for authenticating domain laptops to be enable to connect to corporate wireless network.
We have a Windows 2003 Root& Issuing CA which has published computer certificates to all the domain laptops/workstations. We have also setup a parallel PKI ( Root and Issuing CA) setup on Windows 2012 OS in the same domain.
This Windows 2012 ISsuing CA has also deployed computer certificates to a cpl of testing domain workstations. So the end result, each of these testing workstations has 2 computer certificates in its PERSONAL Store for client/server auth (1)
One issued by the Windows 2003 CA (2) Other cert issued by the Windows 2012 CA.
We are noticing that windows 7 laptops are throwing a warning message similar to as shown below . I have verified that the ROOT certificate coming from both the CA's described above, is present in the ROOT TRUSTED CERTIFICATION AUTH Store on each of these
Windows 7 laptops. Surprisingly, we don't get this same warning on Windows 8 or 8.1 laptops.
Also, if i hit the CONNECT button, i am able to connect to the wireless,
but then i don't see the "Security " Tab anymore under properties of the wireless profile (SSID). I found on some forums to click on the Security Tab and further click on "SETTINGS" and check if the ROOT CA cert is present
in the Trusted Root Certification Authorities” list, . I dont get these options anymore after connecting.
These options do show up on Windows 8 machines after connecting.in the wireless connection properties, in the dialog authentication properties you need to select root CAs which are eligible to issue RADIUS server certificates:
Vadims Podāns, aka PowerShell CryptoGuy
My weblog: en-us.sysadmins.lv
PowerShell PKI Module: pspki.codeplex.com
PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
Check out new: SSL Certificate Verifier
Check out new:
PowerShell File Checksum Integrity Verifier tool. -
Simple SSL test: failing with "The certificate is not trusted ..."
WebLogic 10.3.4 on Win7.
I created a new domain and enabled SSL,with listen ports 7001 and 7002 for http and https respectively.
I deployed a trivial webapp whose main page runs in http, but it opens an iframe with https for a different page in the app.
I loaded the main page, but the iframe fails to load, giving the following error:
The certificate is not trusted because no issuer chain was provided.
(Error code: sec_error_unknown_issuer)
What is the easiest path to get this working?Hi David,
I dont think that the Demo Certificate shall cause the issue.You can enable the SSL debug in weblogic and check what exactly is wrong,while loading the iframe window.
Error code: sec_error_unknown_issuer
Moreover,you can try to add the root certificate to your IE browser and check it
Tools -> Internet options -> content ->Certificates ->
After your import,You can verify the same by checking it from the list and then verify by accessing it again -
How to get rid of "Certificate cannot be trusted" msg with Radius
I am quite new to using RADIUS to have people log in to our wireless lan with their OD username/pass. When I first tried, everyone got a "The certificate cannot be trusted..." message after supplying u/p on login. Click Continue, get IP-address. I thought that if I bought a Verisign certificate, that message would go away on the clients, but it didn't. Hwo can I set it up so that it goes away? The explanation in the message box is either "...because the root certificate is missing" or else "... because there are no explisit trust settings".
LarsI'm on the same road, trying to get rid of the "Adobe Reader Security" popup.
bAskBeforeInstalling and bLoadSettingsFromURL couldn't hide the popup for me either.
What does work is to rename or copy the addressbook.acrodata file, located in %appdata%\Adobe\Acrobat\10.0\Security. But that has to be done for all userprofiles on all machine imho. (copy from the 10.0 to the 11.0 folder, before opening Reader XI).
The Files and Folder feature from the Customization wizard can do file operations, but probably not in all userprofiles?
We need to script this, because the Adobe Customization WIzard cannot help us out here right? -
Dspublish -f or GPO for trusted root certification?
Hi,
I've currently configured a GPO and applied it to several of my main OUs using "\Computer Configuration\Windows Settings\Security Settings\Public Key Policies\Trusted Root Certification Authorities" with the root CA cert.
I believe I can get my domain clients to accept the root CA by using dspublish instead (which may be better as my domain has a lot of blocked inheritance OUs). I can run the commands below to achieve this:
certutil -f -dspublish <Root CA Cert.cer> RootCA
certutil -f -dspublish <Root CA CRL.crl> SubCA
What I'm not sure about is why I would want one method over the other? If I was to use both (as I've already applied a GPO), could it cause any issues?with the GPO method, you can make the CA trusted granularly for specific sets of computers depending on their OU location. You may also enforce the GPO which will pass even through the blocked GPO inheritance.
You can apply GPOs to either domain level, or to any lower OU level. If you operate only a single domain, this is enough.
You cannot apply GPOs to the whole forest, although you could apply GPOs to AD sites. But this might not be always so easy due to some firewall constraints.
When you publish the certificates into AD, you publish them into Configuration partion. This is forest wide partition, so the certificates will be trusted on all computers from the whole forest automatically.
Also, if you want to make an ISSUING CA to be trusted as NTAuth certification authority, the only option is to do it through AD. I do not thing there is a way how to achieve NTAuth with GPO, although I might be mistaken - you could probably make do
with Preferences - Registry, but I didn't try it myself yet.
NTAuth issuing CAs are those, which can issue DC certificates and user logon certificates (smart card logon OID, client authentication OID). Note that NTAuth trust is meant for ISSUING CAs and not for ROOT CAs so if you are concerned only about root CA here,
do not bother with the NTAuth thing.
ondrej. -
As it says, Chrome, Firefox, and Internet Explorer all give the certificate error message for any and every website attempted - including the Firefox add-ons page. The specific error is the "no issuer chain was provided".
1) This problem is not on my computer - it is on my mother's computer in another city. Therefore, I cannot attempt every little possibility without flying over there - I'm looking for things I can tell her to do over the phone. The problem started today. I've already given her the list of anti-malware programs to go install and run from here:
https://support.mozilla.org/en-US/questions/982393
Note that, of course, she will have to accept the security certificate override to get to these things - I hope this isn't bad.
2) The problem started after she tried to use Skype, it hung for a very long time and would never log on. So she tried to reinstall it - and she said she clicked through a number of agreement screens and believes she may have installed malicious 3rd party software. This is ridiculous, is Skype now putting malware on people's computers through these bogus 3rd party add-ons at installation? I suppose it is possible Skype was hanging because of some other problem - but she did manage to reinstall Skype and got it to work (but now her internet certificates won't).
3) She has BitDefender. I am aware that it says here:
https://support.mozilla.org/en-US/kb/connection-untrusted-error-message
that she should turn off SSL scanning. She turned it off, it did not solve the problem. She turned it off and restarted, it did not solve the problem. She has had it on for the past 6 months and it has never caused a problem.
4) In addition, BitDefender reported today that it stopped a malicious program called MySearchDial.exe from attempting something it shouldn't. We went through this removal guide:
http://malwaretips.com/blogs/start-mysearchdial-removal/
however, the software MySearchDial was never actually installed into the windows install list, and we did not find any addons/plugins in any of the browser lists (note that Firefox add-ons cannot be accessed with a certificate error, it gives the error message but DOES NOT give you the option to add an exception so you can't access the add-ons). The only thing we found was (a) MySearchDial was default in the IE search engine list, despite there being no add-on, and (b) MySearchDial.exe was in the temp folder (now deleted). I note that I had BitDefender scan the temp folder *before* I deleted MySearchDial.exe, and it claimed no threats were found. What? It was BitDefender that warned me of it in the first place!
5) Time and date are correct.
6) Checked the Win 7 install log, only Skype, Skype Click-to-Call, and (for some reason) Mircosoft Visual Studio 2010 and Visual C++ were installed or altered today. I got paranoid about Click-to-call and asked her to uninstall it, but it didn't solve the problem.
7) The OS is Win7 64bit Home.
Anything beyond endless Malware removal programs (via list linked above) that we should try?The only way to know what is going on is to retrieve the certificate and check who is the issuer.<br />
It is always possible that the server doesn't send the full certificate chain (intermediate certificates), so it might help to post a link to this website
Check the date and time in the clock on your computer: (double) click the clock icon on the Windows Taskbar.
Check out why the site is untrusted and click "Technical Details to expand this section.<br>If the certificate is not trusted because no issuer chain was provided (sec_error_unknown_issuer) then see if you can install this intermediate certificate from another source.
You can retrieve the certificate and check details like who issued certificates and expiration dates of certificates.
*Click the link at the bottom of the error page: "I Understand the Risks"
Let Firefox retrieve the certificate: "Add Exception" -> "Get Certificate".
*Click the "View..." button and inspect the certificate and check who is the issuer of the certificate.
You can see more Details like intermediate certificates that are used in the Details pane.
If "I Understand the Risks" is missing then this page may be opened in an (i)frame and in that case try the right-click context menu and use "This Frame: Open Frame in New Tab".
*Note that some firewalls monitor (secure) connections and that programs like Sendori or FiddlerRoot can intercept connections and send their own certificate instead of the website's certificate.
*Note that it is not recommended to add a permanent exception in cases like this, so only use it to inspect the certificate.
Maybe you are looking for
-
Spoken feedback doesn't work in walk function 6th generation iPod nano?
Spoken feedback function doesn't work in the Nike+ fitness walk function on 6th generation iPod nano? It's only in working in the running mode?!
-
Cancelling Goods Receipt and Using of Batch Number
Hello, i did a wrong goods receipt with the MIGO and canceled after two days the material document with movement typ 102.The Material uses a Batch number. Now i want to use the old Batch number to do the right goods receipt, but the System says that
-
Itunes directories in my music folder??
I'm wondering here, can anyone explain to me what the reason that there are multiple iTunes directories and config files in my music folder? This is a place where I keep my music and there is no facility i can see to have iTunes move its directories/
-
Help! Export Media does not launch Encoder!
So i go to click on Export Media, and it just sits there. This worked within the last 2 days or so. I tried making a new project and exporting that, no dice. Tried making a new project, importing an old one, no dice. etc etc etc. It just sits there,
-
Im trying to recover my pc but it says re-install windows root /system32/hal.d11. dont what that is
Im trying to find out how to get on my computer it says that i need to re-install <windows root>/system32/hal.d11. dont know how and i pressed f10 to recover my system and it gets to 77 percent and says having trouble extracting files or something li