Push2phone SDK error

Hi ALL
I have 4.1.1 SDK installed, and was trying to load the push2phone.asp sample on the IE browser, so I type in the browser Address box "http://localhost/CiscoIPServices/push2phone/push2phone.asp", but I got this error
Error Type:
msxml3.dll (0x800C0005)
The system cannot locate the resource specified.
/CiscoIPServices/includes/axlquery.asp, line 39
Browser Type:
Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0; .NET CLR 1.1.4322)
Page:
GET /CiscoIPServices/push2phone/push2phone.asp
I suppose this page should load a web form for typing in the message in a browser, right?
Did I miss anything?
TIA
dl

I have the same error before, I think you should have a network connection from your webserver(which host push2phone.asp) and CCM. Try it. Good luck.

Similar Messages

SDK error while installing Labview 8.2 on Windows 7

Hello all,
I have been trying to install LabVIEW 8.2 version software on Windows 7. I always see an SDK error - 12. I saw an helpful artcle in knowledge base but i am not clear why this is happening?
Could somebody explain indetail whether LV8.2 is compatible with Windows 7?
If it is not compatible then i would like install vista or XP on my new Laptop, to work in LV8.2.
Regards
Visu

Hi Viswa,
Im afraid LabVIEW 8.2 is not compatible with Windows 7. If you wanted to use LabVIEW Windows 7 you would need a later version of LV, such as LabVIEW 2009.
If you need to use LabVIEW 8.2 then installing Vista or XP on your machine would mean you could.
Kind Regards
Michael
NIUK Application Engineer

Flex SDK Error

I'm trying to setup the Flex SDK locally (the bugquash event over the weekend
inspired me) and have got everything installed except I'm getting 2 errors after
I import all of the sample projects:
1012: The static attribute may be used only on definitions inside a class.
airframework/airframework/src/mx/core Version.as line 18 1238554510921 1101
and
1012: The static attribute may be used only on definitions inside a class.
rpc/rpc/src/mx/core Version.as line 17 1238554489765 1100
I should be good to go if I can figure out what I'm doing wrong with these 2
things.
This is all that is in those files, but it is the mx_internal static...line that
is causing the issue (in both projects)
import mx.core.mx_internal;
* @private
* Version string for this class.
mx_internal static const VERSION:String = "3.4.0.0";
Any ideas?
Thanks.

<div class=Section1> color:#1F497D'>Your paths look incorrect. Airframework should not have another airframework in it, and doing so probably throws off the include of version.as<o:p></o:p> color:#1F497D'><o:p> </o:p> color:#1F497D'>Alex Harui<o:p></o:p> color:#1F497D'>Flex SDK Developer<o:p></o:p> color:#1F497D'><a href="http://www.adobe.com/">Adobe Systems Inc.</a><o:p></o:p> color:#1F497D'>Blog: <a href="http://blogs.adobe.com/aharui"><span style='color:blue'>http://blogs.adobe.com/aharui</a><o:p></o:p> color:#1F497D'><o:p> </o:p> <div style='border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in 0in 0in'> From:<span style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'> Gareth Arch [mailto:[email protected]] Sent: Thursday, April 02, 2009 6:27 PM To: [email protected] Subject: Flex SDK Error<o:p></o:p> </div> <o:p> </o:p> A new discussion was started by Gareth Arch in Developers -- Flex SDK Error I'm trying to setup the Flex SDK locally (the bugquash event over the weekend inspired me) and have got everything installed except I'm getting 2 errors after I import all of the sample projects: 1012: The static attribute may be used only on definitions inside a class. airframework/airframework/src/mx/core Version.as line 18 1238554510921 1101 and 1012: The static attribute may be used only on definitions inside a class. rpc/rpc/src/mx/core Version.as line 17 1238554489765 1100 I should be good to go if I can figure out what I'm doing wrong with these 2 things. This is all that is in those files, but it is the mx_internal static...line that is causing the issue (in both projects) import mx.core.mx_internal; /** <o:p></o:p> · @private <o:p></o:p> · Version string for this class. <o:p></o:p> · / mx_internal static const VERSION:String = "3.4.0.0"; Any ideas? Thanks. <o:p></o:p> <div class=MsoNormal> <hr size=2 width=200 style='width:150.0pt' align=left> </div> View/reply at <a href="http://www.adobeforums.com/webx?13@@.59b87f68">Flex SDK Error</a> Replies by email are OK. Use the <a href="http://www.adobeforums.com/webx?280@@.59b87f68!folder=.3c060fa3">unsubscribe</a> form to cancel your email subscription.<o:p></o:p> </div>

Any ideas on and error that says: The operation couldn't be completed. (com.facebook.sdk error 2.)

I got an error stating: the operation couldn't be completed. (com.facebook.sdk error 2.) Any ideas on what is wrong?

10shamrocks wrote:
I got an error stating: the operation couldn't be completed. (com.facebook.sdk error 2.) Any ideas on what is wrong?
Not really. Never used Facebook. I'm perfectly content without social media.

CS5 SDK Error compiling Adobe examples.

Hi,
I downloaded the trial version of Illustrator CS5 and the CS5 SDK to be able to adapt my plugins.
These plugins are for CS4.
Each time I try to compile one of the samples provided in the CS5 SDK, I have the same error
error: extra qualification 'AIPlatformFileDlgOpts::' on member 'AIPlatformFileDlgOpts'
Do you Know what to modify to avoid this error.
I use XCode 3.2.2 and MacOS.
Please help me.
JLG.

I just had the very same problem. I changed the compiler from GCC 4.2 to GCC 4.0 in the project settings. That did the trick.

Flex SDK error - ImportRecord cannot be cast to DefineFont

Hello, I'm using the FlexSDK, tried both stable and latest version from svn.
Trying to Embed a source file into actionscript that is a swf containing an ImportRecord2 field that
pulls in a font from an external swf to it.
Gives this error message, works fine if the font is included manually.
Error: Unable to create source hmt_test_asset.: flash.swf.types.ImportRecord cannot be cast to flash.swf.tags.DefineFont
[Embed(source='../resources/test.swf')]
Is this documented and intended behavior? What could be some possible workarounds for this?
If this is a bug, do I need to get the smallest possible swf reproducing the error?
Thanks,
Robert Peters

Please file a bug with a small test case.
Alex Harui
Flex SDK Developer
Adobe Systems Inc.
Blog: http://blogs.adobe.com/aharui

Java SDK - error running demo on OS X

I'm trying to run the java calendar demo using the 9.0.4 developer package on OS X/Darwin (10.3.2)with Java 1.4.2_03. It compiles fine, but I get an error when I run it. Below are the environment variables and error messages.
SDK_DIR=/Users/jeffreym/Desktop/cal_sdk_mac_904
LD_LIBRARY_PATH=/Users/jeffreym/Desktop/cal_sdk_mac_904/lib:/Users/jeffreym/Desktop/cal_sdk_mac_904/java
CLASSPATH=/Users/jeffreym/Desktop/cal_sdk_mac_904/java/csdk.jar:.
[cal_sdk_mac_904/demo/java] jeffreym% java calendar
Exception in thread "main" java.lang.UnsatisfiedLinkError: no csdkjni in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1491)
at java.lang.Runtime.loadLibrary0(Runtime.java:788)
at java.lang.System.loadLibrary(System.java:834)
at oracle.calendar.sdk.Api.<clinit>(Api.java:63)
at calendar.main(calendar.java:21)
There is a library, libcsdkjni.jnilib, in $SDK_DIR/java, though it isn't satisfying the call. Any ideas? -Jeff

The file in the OS X distribution is libcsdkjni.jnilib. I tried the demo on Solaris, and it does work there. The Solaris distribution has a libcsdkjni.so file. How should I resolve the difference on the OS X distribution?
Thanks,
Jeff

Acrobat SDK Error

I try to print (not creating!) PDF files from code (C#) without user intervention. The software I developed is a C# console application which use some objects of SDK Acrobat 9.0.
I only have the Adobe Reader 9 installed on the deploying machine - I do not want to install te Acrobat Pro - is this possible? If it is, then how?
Bcz, I get this error:
Retrieving the COM class factory for component with CLSID {72498821-3203-101B-B02E-04021C009402} failed due to the following error: 80040154.

Thank you lrosenth.
One of the objects I use in my app is AcroAVDoc or AcroPDDoc and I call the Print method doc.PrintPagesSilent(0, pageCount - 1, 3, 1, 1);
I understand, there is no COM APIs available in Reader and then I must install Acrobat Pro, on the deploying machine?
The other solution:
I do not think I'm wrong, but there is no DDE in Acrobat Pro 9.0?
"Command line" - Do you mean the shell command line...?
Thank you very much!
Tom

Custom Action - SDK -error

Based on the "Developing Custom Action in in SAP MII 12.1" i encountered error while running the action block in BLS. In Link Editor I assign 2 values in Inputs and Output to a tracer. When I execute this BLS, I receive following error
[ERROR] [Tracer_0] Link ('Tracer_0.Message' [Assign] from "SimpleAction_0.Output") execution threw an exception. Exception: Invalid variable: SimpleAction_0.Output [Unknown variable: SimpleAction_0.Output
[ERROR] [Tracer_0] Action: Runtime threw an exception. Exception: [Invalid variable: SimpleAction_0.Output Unknown variable: SimpleAction_0.Output
The code is exactly like in the document
package customactions;
import com.sap.lhcommon.common.*; // Needed for the VariantDataTypes and
import com.sap.lhcommon.exceptions.DataConversionException;
// VariantData types.
import com.sap.xmii.bls.sdk.*; // This is the main SDK for custom actions.
* This is a simple action construct used to show how to use some of the basic
* MII 12.1 Custom Action constructs.
public class SimpleActions {
* To ensure the parameters are always named the same, it is good practice to
* create a static final string with the parameters name. This also make it
* easy to use across actions.
private static final String PARAM_OUTPUT = "Output";
* Describes a simple action that adds two numbers together.
* @param instance This is the action instance. This is the main interface
* from the action code back into the transaction engine. Most
* users will only need to set their variables through this
* interface, though much more powerful operations are also
* available.
* @param in1 This is an input into the action. The type is detected by the
* transaction engine and automatically cast to the correct value.
* @param in2 This is a second input.
* @throws InvalidVariableException This exception is
@Action(name = "AddTwoNumbers") // This annotation tells the engine that this
// is an action available to execute.
@Outputs(names = { PARAM_OUTPUT },
types = { VariantDataTypes.INTEGER }) // This annotation tells
// the engine that one
// integer output called
// 'Output' is going to be
// returned.
public static void addTwoNumbers(
IActionInstance instance, // Besides the basic types, the
// IActionInstance interface is the only
// other type allowed to be defined in
// parameter list of a custom action.
@Input(name = "Input1") int in1, // @Input annotations are used to
// indicate the user modifiable
// inputs to this action.
@Input(name = "Input2") int in2)
throws InvalidVariableException { // Exceptions can be thrown directly from
// the actions without causing critical
// execution failures. These exceptions
// will be caught and logged by the engine
// and will cause the Success flag to be
// set to false.
// The following code describes how to set an actions output.
try {
 instance.setActionResult(PARAM_OUTPUT, in1 + in2);
} catch (DataConversionException e) {
 // TODO Auto-generated catch block
 e.printStackTrace();
the catalog is
<ComponentCatalog>
<Category Name="Custom" Description="Custom">
 <Component Type="Action" Name="AddTwoNumbers"
 Description="" Label="SimpleAction"
 ClassName="customactions.SimpleActions"
 AssemblyName="SimpleActions.jar" Dependencies=""
 HelpFileName="" />
</Category>
</ComponentCatalog>
Is there anything I might have done wrong?

hargoe
and do you know why my icon does not show up? it just black.
@Action(name = "AddTwoNumbers", icon="icons/CustomAction.png")
i created a package called icons and in this package I have a .png file called CustomAction.png
I copied this CustomAction.png from another .jar and it works for that jar.
thanks

Problem installing SQLdeveloper. Cannot find a J2SE SDK error

I am trying to install SQL developer in my windows 7 64 bit machine. It is asking for the java path when clickin the sqldeveloper.exe. I am giving the path of java as C:\Program Files (x86)\Java\jre6\bin where i have java application file available. but i am getting cannot find a j2se SDK installed in the above path error. Please help

Hello,
please ask this in the appropriate forum: {forum:id=260}
It seems to be a common problem
https://forums.oracle.com/forums/search.jspa?objID=f260&q=win+64bit
Regards
Marcus
Edited by: Marwim on 12.10.2011 10:59
added search link

Flash Builder 4.0 and Flex 4.5 SDK Errors

I'm having issues using 4.5 in FB 4.0
Every time I create a new project and target 4.5 I get the following errors:
Description
Resource
Path
Location
Type
1084: Syntax error: expecting rightbrace before css
testing
Line 24
Flex Problem
1084: Syntax error: expecting rightbrace before end of program
testing
Line 447
Flex Problem
1084: Syntax error: expecting rightbrace before s
testing
Line 24
Flex Problem
1093: Syntax error.
testing
Line 24
Flex Problem
1093: Syntax error: A string literal must be terminated before the line break
testing
Line 24
Flex Problem
keep in mind the is a new project targeting the 4.5 SDK in Flash Builder 4.0. I have done nothing but create the project.
If I create the project with 4.1 SDK in Flash Builder 4.0, there are no issues.
Can someone confirm this is an issue with using 4.5 in FB 4.0 or share a solution to resolving the issues?
Thank you.

Can you create a simple project that demonstrates this?

Bringing in Flash Catalyst project produces SDK error

Hey everyone. I have been googling this problem for quite awhile and can't find a fix that works. I really hope someone on here can help me out. Whenever I bring in a Flash Catalyst project that I've made in FC CS5.5, I get an error and warnings about errors with the SDK, needing Flex 4.5. Well, the Adobe area said that I can select to open a project with whatever sdk I want. I tried that. There is no option that I can find to allow me to pick the sdk I want.
How do I fix this? Help would be greatly appreciated!!

Hey Sumit,
In the public beta we'll be releasing with the most up to date version of the Flex SDK. There's no way to actually change the SDK in the MAX build unfortunately.
=Ryan
[email protected]

[CS3 SDK] Error "A tool returned an error code from"

Hello!!!
I'm starting to develop plug-ins on InDesign using the first exercise of tutorial (WriteFishPrice) with VisuaStudio C++ 2008 ExpressEdition.
When I try to compile my source I got this message:
In compiling error does not occur none (0 Failed, 0 warnings, 0 skips)
In compiling error does not occur none (0 Failed, 0 warnings, 0 skips).
To me it describe that me code are working fine, but the PlugIn does not work, it is generated, but when put in the plugins folder of InDesign gives error to start.
(Adobe InDesign cannot load the WRITEFISHPRICE.PLN plug-in. The WRITEFISHPRICE.PLN plug-in requires the debug version of InDesign. Please contact the vendor to get a compatible version of WRITEFISHPRICE.PLN)
I'm posting the low response from the compiler, if someone could help me I would be grateful.
http://www.denisramos.com/sidnei/BuildLog.htm
Thanks

From the build log, you have a build events which are trying to execute
odfrc and merge_res.cmd.
both are in the SDK bin folder; for me it's C:\Adobe\CS2SDK\devtools\bin
You need to add the path to the equivalent folder either for the project in Visual Studio.
I'm surprised you have a pln created, but in any case the resources won't be correct.

C++ Kinect SDK: error LNK2019 unresolved external symbol

I'm receiving the message "error: LNK2019" error when I attempt to run a basic C++ Kinect program. I am running Windows 7 32bit with the Kinect SDK 1.0 and developing in Visual Studio 2010. The included Skeletal Viewer sample works correctly,
so I believe my problem lies in the project configuration. I tried comparing my project config to the sample's, but I can't find any differences so I thought I'd open this up to the forums. Is there any missing or incorrect information that I'm
not seeing? Or is there some other configuration I should be checking?
Thank you in advance.
#include "stdafx.h"
#include <iostream>
#include <windows.h>
#include <NuiApi.h>
#include <stdio.h>
-- Include Directories: --
$(VCInstallDir)include;
$(VCInstallDir)atlmfc\include;
$(WindowsSdkDir)include;
$(FrameworkSDKDir)\include;
$(KINECTSDK10_DIR)\inc;
-- Library Directories --
$(VCInstallDir)lib;
$(VCInstallDir)atlmfc\lib;
$(WindowsSdkDir)lib;
$(FrameworkSDKDir)\lib;
$(KINECTSDK10_DIR)\lib\x86;
These are the specific errors I'm getting:
1>kinectruntime.obj : error LNK2019: unresolved external symbol __imp__NuiImageStreamGetNextFrame@12 referenced in function _main
1>kinectruntime.obj : error LNK2019: unresolved external symbol __imp__NuiImageStreamOpen@24 referenced in function _main
1>kinectruntime.obj : error LNK2019: unresolved external symbol __imp__NuiInitialize@4 referenced in function _main

Is kinect10.lib listed among the libraries in your project's properties, under Linker | Input | Additional Dependencies?
If not, that is the likely cause for the errors.
John
K4W Dev
That was it! Thank you for the quick response and the clear directions.
Since I see you're with Microsoft, I'd like to point out this step was missing from the set up instructions that come with the SDK installation. This guide says to link kinect10.lib by linking
$(KINECTSDK10_DIR)\lib\x86; As we saw here, that's not quite the same thing!
Programming Guide > Using Visual Studio > To Create an Unmanaged Application > Step #5

OAM SDK Error

Hi,
I have an Access Gate installed on my Windows Desktop and wrote a test program with the SDK. I'm able to obtain policy information by using the getPolicyDomains() method and it returns the correct number of policies, etc.
What I really need to do is run a "test" because I want to find out if a certain user will be able to access a certain resource. It doesn't work. I sent my code to someone else and it works for them--using their own OAM installation. So I'm thinking there is something wrong with the way OAM is installed on our boxes.
As I said I can get the policy information, but the testAccess method bombs. Eclipse displays OAM debug information, however I don't get any message from the exception that catches the error--it's just null. i'm testing with user OblixAnonymous to see if he can access abweb4o.
Does this debug output indicate what the problem could be? It's messy. Thank you in advance.
1-6-2011 14:41:19Sending message: 2 17
am=v%3d%201;req%3d+10;admtok%3d+108:39rI0HCmLkTHimbYzCH/tgnhSK9quO/XBiE8LYc4VwmzJaezfCqTYEeckcShklIpVBR0mSv2hghWTXAhu1QD1nfT+M9U++6uE2E9llRTrQc%3d;test%3d%20url%3d%2018:abweb4o/index.html;restype%3d%204:http;op%3d+3:GET;op%3d+4:POST;user%3d+uid%3d%2014:OblixAnonymous;login%3d%2014:OblixAnonymous;;showallowed%3d%20T;showdenied%3d%20T;; sc=true
1-6-2011 14:41:19Received message: 2 17
st=ma%3d57%20mi%3d2%20sg%3d0%20sm%3d am=v%3d+0;except%3dcode%3d+219;p1%3d+251:\Oblix\10143hf\palantir\dblib\src\user_db.cpp:687:%20Error:%20Exception%20re-thrown%20in%20UserDB::CheckUid.%0a\Oblix\10143hf\palantir\dblib\src\user_db.cpp:683:%20Error:%20Unable%20to%20search%20the%20Directory%20Server%20because%20of%20Operation%20not%20supported.%20in%20UserDB::CheckUid.;p2%3d+0:;;
failed with Message=null <--this is the exception message content

Hi Sazama,
Oracle does not usually share its source code, at least without a contract in place.
As you say, if the Policy Manager is happily returning authorisation results for the OblixAnonymous user (and you tested when logged into the Policy Manager as the same user who logs into the AccessGate app) then that does show that ldap is OK, and that Policy Manager is configured correctly to use it. However, with the ASDK application it is the Access Server that will do the search (Policy Manager communicates directly with ldap) so it is worth going into the Identity System Console and checking that the Directory Profile the Access Server is using is setup correctly (compare it with the one the Policy Manager uses, for example). I can't really unserstand what the problem is, or why it would have happened, but I believe that the problem is in that area (though I will keep an open mind, of course :-) ).
I assume that the Access Management Service is also on for the Access Server that the AccessGate connects to?
Regards,
Colin

Push2phone SDK error

Similar Messages

Maybe you are looking for