Pushbuttons on application toolbar of basic list 1

Hi all,
I want to do BDC for sales order creation but before that my user want to validate item data based on some conditions (customised in system using user exit : idea is to avoid occureence of user exit by validating it on internal table level )
So I will display the data in the list format and user will check it...and then execute BDC...for that I want some pushbuttons on application toolbar of basic list 1.....(not on selection screen)
I am thinking of set pf-status...but how and where to set it?
Any idea please........
Thanks....

Hi,
You can place SET PF-STATUS just before the display list code.
Regards,
Sravanthi

Similar Messages

Pushbutton on application toolbar

Hi,
How to write code for pushbutton on application toolbar in a normal report program and functionality on that?
Basic question. Please search before posting such basic questions
Edited by: kishan P on Sep 2, 2010 3:09 PM

Hi Chandrka,
To create and appear push button in the screen you need to create a Push button.
go to start of selection .
add syntax.
Set PF STATUS 'cutom'. <-- Double click on the custom it will take you to se41 and add a button in application toolbar
and write code in At-user command and handle it.
Prabhudas

Adding Button on application toolbar on ABAP List display screen....

Hello Gurus,
I copied SAP program 'RFBUEB00' into custom program. When I execute the custom report, I see the data lijne by line in ABAP list. I see a deafult 'Select' button on application toolbar.
If I want to add additional custom button on application toolbar on ABAP list display screen, how can I do it ? Please help.
Regards,
Jainam.
Edited by: Jainam Shah on Oct 27, 2009 5:44 PM

>
Jainam Shah wrote:
> In my case it just rights the data in ABAP screen as follows. I can't use ALV grid and stuff because its on older version.
>
>
FORM LISTE_SCHREIBEN.
>
>   check = '@T9@'.
>
>   FORMAT COLOR COL_KEY INTENSIFIED OFF.
>   WRITE: / SY-VLINE,
>            check,
>            BKPF-BUKRS,
>            BKPF-BELNR,
>            BKPF-GJAHR.
>   FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
>   WRITE:   BKPF-BLART,
>        (8) BKPF-BLDAT DD/MM/YY,
>        (8) BKPF-BUDAT DD/MM/YY,
>            BKPF-WAERS,
>            BKPF-XBLNR,
>         80 SY-VLINE.
>   XAUSGABE = 'X'.
>   HIDE: BKPF-BUKRS, BKPF-BELNR, BKPF-GJAHR, BKPF-BSTAT, XAUSGABE.
>   IF BKPF-BKTXT NE SPACE.
>     FORMAT COLOR COL_KEY INTENSIFIED OFF.
>     WRITE: / SY-VLINE, CHAR4 UNDER BKPF-GJAHR.
>     FORMAT COLOR COL_NORMAL INTENSIFIED.
>     WRITE:   BKPF-BKTXT UNDER BKPF-BLART,
>              80 SY-VLINE.
>     HIDE: BKPF-BUKRS, BKPF-BELNR, BKPF-GJAHR, BKPF-BSTAT, XAUSGABE.
>   ENDIF.
> ENDFORM.
>
>
> I have to select multiple lines and proces them. For one line I know I can use AT-LINE-SELECTION but this is multiple lines...
What is your SAP system version?
It seems to be displayed only in ALV. Well, if you can make it to display in LIST ... you can go with set pf-status.
good luck

Adding pushbutton in application toolbar of HR programs using LDB

Hi all!
I have a requirement to add a pushbutton in the selection screen application tool bar for the HR programs when using LDB PNP.
Normally when we are using LDB in our program we will get a extra button provided by SAP after the execyte button. When we are creating a new button for this by using the table fields sscrfields with the function key as 2.
But, the statement "SELECTION SCREEN FUNCTION KEY 1" is not showing any pushbutton in the application toolbar.
The same question is already posted in SDN but no reply.
Please provide your suggestion.
Thanks,
Rajan U

Hi all!
I have a requirement to add a pushbutton in the selection screen application tool bar for the HR programs when using LDB PNP.
Normally when we are using LDB in our program we will get a extra button provided by SAP after the execyte button. When we are creating a new button for this by using the table fields sscrfields with the function key as 2.
But, the statement "SELECTION SCREEN FUNCTION KEY 1" is not showing any pushbutton in the application toolbar.
The same question is already posted in SDN but no reply.
Please provide your suggestion.
Ive found this keyword: SELECTION-SCREEN FUNCTION KEY n [ldb_additions]. Will this be useful??
Thanks,
Rajan U

Multiple pushbuttons on application toolbar not fitting

Hi ppl,
I have a created a custom transaction wherein I need to display about 18 pushbuttons on the application toolbar.
But, the problem is that all of these do not fit on the screen so I can see only about 10 buttons in my transaction (the last button is not even displayed completely).
Please let me know if I can create a multi line application toolbar or is there any other solution for this?
Regards.

Hi ppl,
I had a custom screen designed for my transaction.
And I was able to display around 10 buttons on the application toolbar. No issues with that.
Now, I have placed 9 pushbuttons on the application toolbar and the remaining are designed in the screen area.
Thank you all for the quick and helpful replies.
Regards.

Pushbuttons on application toolbar in selection screen

Hi,
I have created 2 pushbuttons in the application tool bar of selection screen using pf-status.But the other icons in the standard toolbar were grayed out because of this.can anyone tell me why this is happening.

Hi
you need to define those other elements of the menubar in the PF-STATUS for example for back write -
> BACK
for cancel----->CANCEL for save
use these predefined function codes
PRI
List
CTRL-P
Print displayed list
%EX
List
Shift-F3
Exit processing
PICK
Edit
F2
Event AT LINE-SELECTION
RW
Edit
F12 , ESC
Cancel processing
%SC
Edit
CTRL-F
Find
%SC+
Edit
CTRL-G
Find next
BACK
Goto
F3
Back one level
P--
CTRL-PgUp
Scroll to first window page
P-
PgUp
Scroll to previous window page
P+
PgDn
Scroll to next window page
P++
Ctrl-PgDn
Scroll to last window page
Regards
Pavan
Edited by: Pavan Bhamidipati on Jul 11, 2008 6:40 AM

Check box in basic list

Hi frieds,
I wants to display a list of record in basic list and also one chek box for every record.
Then based on selected check box i want to cancel that record in database means i want to set it's flag. also in application toolbar of basic list display cancel button.
can any one gives me code for this.
Thank you.
Regards,
Virat

Hi
See the sample example code
and do accordingly
TABLES:MARA.
DATA:BEGIN OF GT_MARA OCCURS 0,
MATNR LIKE MARA-MATNR,
END OF GT_MARA,
GV_CB,
GV_CBV,
GV_LINES TYPE I,
INDEX TYPE I,
SY_INDEX TYPE I,
GV_LINES1 TYPE I,
MATNR LIKE MARA-MATNR.
SELECT-OPTIONS:S_MATNR FOR MARA-MATNR.
SELECT
MATNR FROM MARA
INTO TABLE GT_MARA
WHERE MATNR IN S_MATNR.
IF SY-SUBRC = 0.
DESCRIBE TABLE GT_MARA LINES GV_LINES.
ENDIF.
LOOP AT GT_MARA.
WRITE:/ GV_CB AS CHECKBOX,
GT_MARA-MATNR.
ENDLOOP.
CLEAR GT_MARA.
WRITE:'Total num of records is ',GV_LINES.
SET PF-STATUS 'DEL'.
AT USER-COMMAND.
IF SY-UCOMM = 'DEL' OR SY-UCOMM = 'PICK'.
DO 50 TIMES.
SY_INDEX = SY-INDEX.
READ LINE SY_INDEX FIELD VALUE GV_CB
GT_MARA-MATNR INTO MATNR.
IF GV_CB = 'X'." AND MATNR IS NOT INITIAL.
LOOP AT GT_MARA." WHERE MATNR = MATNR.
DELETE GT_MARA.
CLEAR GT_MARA.
ENDLOOP.
delete gt_mara index sy_index.
ENDIF.
ENDDO.
DESCRIBE TABLE GT_MARA LINES GV_LINES1.
WRITE:'Total num of records is ',GV_LINES1.
CLEAR:GV_LINES .
LOOP AT GT_MARA.
WRITE:/ GT_MARA-MATNR.
ENDLOOP.
ENDIF.
Reward points for useful Answers
Regards
Anji

Displaying a Push button in the application toolbar for an ALV report

Hello everyone,
Query:
Is it possible to display a custom push button in the application tool bar while displaying an ALV report(1st one)?
On pressing this custom push button will I be able to display another ALV report(2nd one) based on the selection made on the current ALV report(1st one)?

Yes u can have pushbutton on application toolbar.
You just have to use the new pf status in your report program.
You should copy the 'STANDARD' GUI status from program SAPLKKBL using transaction SE90 >Programming SubObjects> Gui Status.
Execute this transaction to get to next screen. select status using checkbox. click on GUI Status --> Copy.
Enter your Z program name and the name you what for this status - you can keep it as 'STANDARD' to be simple.
Then you can edit the new status to add or delete buttons. This will also bring in the standard SAP ALV functionality.
Have a look at below code for using the new status.
TYPE-POOLS: slis.
DATA: i_qmel LIKE qmel OCCURS 0.
data v_repid type repid.
SELECT * FROM qmel INTO TABLE i_qmel.
v_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = v_repid
I_CALLBACK_PF_STATUS_SET = 'SET_PF_STATUS'
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
i_structure_name = 'QMEL'
TABLES
t_outtab = i_qmel
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
form set_pf_status using rt_extab type slis_t_extab.
set pf-status 'TEST'.
endform.
FORM user_command USING ucomm LIKE sy-ucomm
selfield TYPE slis_selfield.
data lv_ucomm type sy-ucomm.
lv_ucomm
= sy-ucomm.
CASE lv_ucomm.
WHEN 'BUTTON'. "Double Click line Item
**Write ur functinality here
endcase.
endform.
Also have a look at below links.
http://www.sap-basis-abap.com/abap/add-button-to-alv-toolbar-with-reuse-alv-list-display.htm
ALV report
Best Regards,
Vibha
*Please mark all the helpful answers

Changing of Application ToolBar pushbutton base on the tab.

Hi,
I have a tabstrip with 2 tab. When the user come to the first screen ( 1st tab) the application toolbar will show 3 pushbutton, when the user select 2nd tab, the application toolbar must change to 2 pushbutton.
When the user click back on the 1st tab, it will show the 3 pushbutton again in the application toolbar. How to achieve that?
Regards,
Rayden

Hi Rayden ,
I am giving you an idea, just try this, in the mean time I will prepare a code for you and 'll post. What I understood is you want to display 3 Buttons in the application tool bar for the Tab 1 and 2 for the Tab 2.
Just declare an internal table with type sy-ucomm.
Data:itab type standard table of sy-ucomm.
Now you 'll be having one screen say 1001 in which two subscreens 0101 and 0102. For the screen 1001 create all the 5 (3+2) buttons.
Say you have a button called SAVE and function code is SAVE also.
Append save to itab.
Now when user will select the tab1 check the ok_code and in the PBO section for the screen 1001 you have to set the PF status as below.
In that case suppose you don't want to display the SAVE button so what you have to do is
set pf-status 'PF_1001' excluding itab.
So you have to just write a logic to handle this scenario with tab2 also.
Hope this would help you.
Cheers
Somnath

Application toolbar list report

Hi,
How would I get a button on the application toolbar for an abap list report.
I could do it using a selection screen, but I want the button usuable when the list output is printed
to the screen. I have clickable icons on the list report. Be nice to have toolbar buttons.
thanks
Dylan.

Hi you are asking about selection-screen application tool bar buttons or output application tool bar buttons. If u want selection-screen application tool bar buttons then go with SCCRFIELDS structure. If u want output application tool bar buttons then go with Set pf-status.
Regards,
Kumar.

How many pushbuttons u can create in application toolbar in selection scree

Hi
How many pushbuttons u can create in application toolbar in selection screen?
Thank You

Hi,
Use SET PF-STATUS 'ZABC'.
Double click on it.
It will display Application toolbar. Create the buttons.
I think the limitation is bcz of the LABEL of button, if you create buttons with a Single TEXT, then you would be able to create many buttons, including toggle button. The Toggle button would switch the buttons.
i.e say initially 10 buttons are displayed along with toggle button. You click the toggle button , then remaining 10 buttons are displayed.
Best regards,
Prashant

ALV List Display With a Pushbutton in the basic list

i have displayed the po details in teh basic list. I have used the double clicking functionality. It worked well. Now instead of double clicking, i will place the cursor on the po and click a push button. then it should show the other details.
Can anyone please guide me how to create the pushbuttons on the basic list ?

Hi,
 You create your own GUI status.Pass the name of GUI status to FM REUSE_ALV_GRID_DISPLAY.
e.g.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 i_callback_program = sy-repid
 CALLBACKPF_STATUS_SET = 'PF'
 i_callback_user_command = 'USER_COMMAND'
 i_grid_title = text-020
 is_layout = wa_layout
 it_fieldcat = it_fieldcat[]
 TABLES
 t_outtab = it_basic
 EXCEPTIONS
 program_error = 1
 OTHERS = 2.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
FORM PF.
SET PF_STATUS 'P1'.
ENDFORM.
On pressing that button go to secondary list.

How to call report by click application toolbar button?

I need to know the way to call a report by click a button in application toolbar?
BR,
Ali
Moderator message: next time, please (re)search yourself instead of asking basic questions.
Edited by: Thomas Zloch on Aug 31, 2010 11:44 AM

Hi Ali,
Selection-screen function key is used to add push buttons on application tool bar.
Syntax:
selection-screen functuin key<num>
Where num is ranging from 1 to 5.
whenever application toolbat components are added using above statement,tables are defined in the structure "SSCRFIELDS" as "Functxt_01","Functxt_02","Functxt_03","Functxt_04","Functxt_05" for the related function key numbers.
eg:
Tables SSCRFIELDS.
Selection-Screen pushbutton/10(10 lb1 user-command pb1.
Selectiong-Screen Function key1.
Selectiong-Screen Function key2.
Selectiong-Screen Function key3.
Selectiong-Screen Function key4.
Selectiong-Screen Function key5.
Initialization.
sscrfields-Functxt_01 = 'first".
sscrfields-Functxt_01 = 'fifth".
At Selection-Screen.
case sy-ucomm.
When 'first'.
Sumbit zreport.
endcase.
Hope it solves your problem.
Regards,
Amarnath S

Output screen basic list buttons

Hi frnds,
               what are the steps to create buttons in the application toolbar in our output screen.
like i m getting sales header data in my basic list so in the output i m having a button which i press then i will get sales item details.
so can anyone help me how to create that button there in the ouput screen.
regards,
sanjay

Hi,
You can copy the GUI STATUS STANDARD of the program SAPLKKBL in SE41 and create a new one..
in that add a button in the application toolbar section..
Then use call back pf status parameter to pass the subroutine to display the gui status..
Then use call back subroutine parameter in the alv function module to give the subroutine name..
check this example for using double click to get the item details.
TYPE-POOLS: slis.
DATA: BEGIN OF itab1 OCCURS 0,
        vbeln TYPE vbeln,
        bstnk TYPE vbak-bstnk,
        erdat TYPE vbak-erdat,
        kunnr TYPE vbak-kunnr,
      END OF itab1.
DATA: BEGIN OF itab2 OCCURS 0,
        vbeln TYPE vbeln,
        matnr TYPE vbap-matnr,
        netpr TYPE vbap-netpr,
        kwmeng TYPE vbap-kwmeng,
      END OF itab2.
DATA: t_fieldcatalog1 TYPE slis_t_fieldcat_alv.
DATA: t_fieldcatalog2 TYPE slis_t_fieldcat_alv.
DATA: v_repid         TYPE syrepid.
v_repid = sy-repid.
* Get the fieldcatalog1
PERFORM get_fieldcat1.
* Get the fieldcatalog2
PERFORM get_fieldcat2.
SELECT vbeln bstnk erdat kunnr UP TO 10 ROWS
       INTO TABLE itab1
       FROM vbak.
IF NOT itab1[] IS INITIAL.
SELECT vbeln matnr netpr kwmeng UP TO 10 ROWS
         INTO TABLE itab2
         FROM vbap
         FOR ALL ENTRIES IN itab1
         WHERE vbeln = itab1-vbeln.
ENDIF.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
     EXPORTING
          i_callback_program      = v_repid
          i_callback_user_command = 'DISPLAY_DETAIL'
          it_fieldcat             = t_fieldcatalog1
     TABLES
          t_outtab                = itab1.
*       FORM display_detail                                           *
* --> UCOMM                                                         *
* --> SELFIELD                                                      *
FORM display_detail USING ucomm LIKE sy-ucomm
                        selfield TYPE slis_selfield.
DATA: itab2_temp LIKE itab2 OCCURS 0 WITH HEADER LINE.
IF ucomm = '&IC1'.
    READ TABLE itab1 INDEX selfield-tabindex.
    IF sy-subrc = 0.
      LOOP AT itab2 WHERE vbeln = itab1-vbeln.
        MOVE itab2 TO itab2_temp.
        APPEND itab2_temp.
      ENDLOOP.
      CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
           EXPORTING
                i_callback_program = v_repid
                it_fieldcat        = t_fieldcatalog2
           TABLES
                t_outtab           = itab2_temp.
    ENDIF.
ENDIF.
ENDFORM.
*       FORM GET_FIELDCAT1                                            *
FORM get_fieldcat1.
DATA: s_fieldcatalog TYPE slis_fieldcat_alv.
s_fieldcatalog-col_pos = '1'.
s_fieldcatalog-fieldname = 'VBELN'.
s_fieldcatalog-tabname   = 'ITAB1'.
s_fieldcatalog-rollname = 'VBELN'.
s_fieldcatalog-hotspot   = 'X'.
APPEND s_fieldcatalog TO t_fieldcatalog1.
CLEAR s_fieldcatalog.
s_fieldcatalog-col_pos = '2'.
s_fieldcatalog-fieldname = 'BSTNK'.
s_fieldcatalog-tabname   = 'ITAB1'.
s_fieldcatalog-rollname = 'BSTNK'.
APPEND s_fieldcatalog TO t_fieldcatalog1.
CLEAR s_fieldcatalog.
s_fieldcatalog-col_pos = '3'.
s_fieldcatalog-fieldname = 'ERDAT'.
s_fieldcatalog-tabname   = 'ITAB1'.
s_fieldcatalog-rollname = 'ERDAT'.
APPEND s_fieldcatalog TO t_fieldcatalog1.
CLEAR s_fieldcatalog.
s_fieldcatalog-col_pos = '4'.
s_fieldcatalog-fieldname = 'KUNNR'.
s_fieldcatalog-tabname   = 'ITAB1'.
s_fieldcatalog-rollname = 'KUNNR'.
APPEND s_fieldcatalog TO t_fieldcatalog1.
CLEAR s_fieldcatalog.
ENDFORM.
*       FORM GET_FIELDCAT2                                            *
FORM get_fieldcat2.
DATA: s_fieldcatalog TYPE slis_fieldcat_alv.
s_fieldcatalog-col_pos = '1'.
s_fieldcatalog-fieldname = 'VBELN'.
s_fieldcatalog-tabname   = 'ITAB2'.
s_fieldcatalog-rollname = 'VBELN'.
APPEND s_fieldcatalog TO t_fieldcatalog2.
CLEAR s_fieldcatalog.
s_fieldcatalog-col_pos = '2'.
s_fieldcatalog-fieldname = 'MATNR'.
s_fieldcatalog-tabname   = 'ITAB2'.
s_fieldcatalog-rollname = 'MATNR'.
APPEND s_fieldcatalog TO t_fieldcatalog2.
CLEAR s_fieldcatalog.
s_fieldcatalog-col_pos = '3'.
s_fieldcatalog-fieldname = 'NETPR'.
s_fieldcatalog-tabname   = 'ITAB2'.
s_fieldcatalog-rollname = 'NETPR'.
APPEND s_fieldcatalog TO t_fieldcatalog2.
CLEAR s_fieldcatalog.
s_fieldcatalog-col_pos = '4'.
s_fieldcatalog-fieldname = 'KWMENG'.
s_fieldcatalog-tabname   = 'ITAB2'.
s_fieldcatalog-rollname = 'KWMENG'.
APPEND s_fieldcatalog TO t_fieldcatalog2.
CLEAR s_fieldcatalog.
ENDFORM.
Thanks
Naren

Module-Pool application toolbar

Respected SAP guru,
I like to know how Application Toolbar button should be disabled or enabled in Module-Pool Programming plz, explain with example.
Sincerly,
sandeep

As mentioned in the Thread, use the Syntax
SET Pf-STATUS 'STATUS' excluding itab
Example:
data: BEGIN OF MTAB_UCOMM_EXCLUDE OCCURS 0,
        VALUE(4) TYPE C,
      END OF MTAB_UCOMM.
AT USER-COMMAND.
PERFORM SET_PF_STATUS. ...
FORM SET_PF_STATUS *
Set up the menus/buttons for the report *
FORM SET_PF_STATUS.
CLEAR MTAB_UCOMM_EXCLUDE.
REFRESH MTAB_UCOMM_EXCLUDE.
CASE MI_CURRENT_PAGE.
    WHEN 1.
*-- Do not want any pushbuttons that point to items to the right
*-- since the list is at its rightmost position
    MTAB_UCOMM_EXCLUDE-UCOMM = 'FRST'.
    APPEND MTAB_UCOMM_EXCLUDE.
    MTAB_UCOMM_EXCLUDE-UCOMM = 'PREV'.
    APPEND MTAB_UCOMM_EXCLUDE.
WHEN MI_TOTAL_PAGES.
*-- Do not want any pushbuttons that point to items to the left
*-- since the list is at its leftmost position
    MTAB_UCOMM_EXCLUDE-UCOMM = 'LAST'.
    APPEND MTAB_UCOMM_EXCLUDE.
    MTAB_UCOMM_EXCLUDE-UCOMM = 'NEXT'.
    APPEND MTAB_UCOMM_EXCLUDE.
WHEN OTHERS.
*-- Want all pushbuttons to appear on any other page
ENDCASE.
SET PF-STATUS 'MAIN' EXCLUDING MTAB_UCOMM_EXCLUDE.
ENDFORM. " SET_PF_STATUS
Hope this helps
Vinodh Balakrishnan

Pushbuttons on application toolbar of basic list 1

Similar Messages

Maybe you are looking for