Pushed restore button with itunes and now it seems stuck and won't reinstall software
Restore button was accidentally pushed while trying to install itunes and now it appears to be stuck and won't reinstall software.
Please help
Try restoring. Make sure you have a backup first.
Similar Messages
-
Syncing iphone and now phone is stuck and wont power off or do anything
syncing iphone and now phone is stuck and wont power off or do anything
Reboot the phone: hold down the power button and the home button at the same time until you see the Apple logo. Ignore the "slide to shut down". When the screen has been completely black for a few minutes, press the power button again.
-
So. my home button was broken and i wanted (stupid idea) to jailbreak my ipod, i used the new redsn0w Dfu ipsw, then tried to put it in dtf mode via itunes. how ever now its just stuck on a black screen, i tried t restor it with itunes but that just comes up with an error. help?
Errors related to third-party security software
Error 2, 4 (or -4), 6, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or phobos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.
Last,
Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I am a newbie...and I think I did a big no-no as my Ipad isn't working. I synced it to a second computer at work which is a new Imac after already syncing to my pc at home with Itunes. Now it says it can't restore and can't get it to open, getting error messages but can't fix myself. Can anyone help??
iPad can connect only in one iTunes Library. If you want to connect it to a iTunes Library then you have to erase it. You can erase it from iTunes. Make sure you iPad doesn't have a password, or if it has a password make sure that you connect to the computer and enter the password of your iPad
-
I tried updating my iPhone3g through itunes. Now i'm stuck in recovery mode and i've EVERYTHING even websites and such but nothing worked out! I've also tried restarting and fiddling with the home button but nothing still worked. Please help! What should I do??
Well, if you've indeed tried EVERYTHING, then you'll need to bring your phone to Apple for evaluation.
-
I formatted my iPhone 5 and now it won't activate. I've tried connecting it to iTunes, and I've tried restoring it with Itunes.
Im stuck on the wifi screen where you activate the phone. Please helpsame here, I was using an ios7 beta version for non developpers and I downgrated it but its stuck where I active it, hope we wont stay this way for too long
-
I bought a ipod 5th gen 32gig off a road side peddler for $175. It was working when I bought it. I wonted to remove his music and stuff off of it so I restored it with itunes and now it wont let me activate it. I do not have his info and I do not know how to get in touch with him I have had third gen ipods and never had any problums like this before Help!!!
Either get the Apple ID and password from him to activate the iPod
iCloud: Find My iPhone Activation Lock in iOS 7
or have him remote remove the device from his account
Find My iPhone Activation Lock: Removing a device from a previous owner’s account
or return it for a refund.
Otherwise you have an expensive, thin brick -
After updating my Iphone 4s to os 7.1.1 from 7.1 over the air, my phone went into recovery mode. Yet when I try to restore it with Itunes on my windows 7 laptop it says the network connection has been reset. Make sure your network settings are correct and your network is active, or try again later. My phone has the itunes logo and charger symbol on it, as well as an arrow pointing at the Itunes logo. After holding the sleep button down or even doing the hard reset the same screen comes up on my phone regardless of whether it is plugged in or not to my computer. I have turned my computer off and on again. It is plugged in and charging as it's battery life is very short. I also reset my modem and the same error message pops up. The only option on my computer when my phone is plugged in is to restore it. My firewall also allows Itunes through it. I have literally tried everything I know being someone who knows very little about technology. I also do not want to hear about how the update worked for other people. My phone has been in recovery mode for 5 hours at least now so it will just make me more frustrated if a bunch of people post about how the update worked for them.
Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
kevinpowell1 wrote:
how can i get it out of recovery mode?
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
Some users have reported as many as 8 or 9 attempts were necessary before success.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
If the issue persists...
Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first... -
hey all just trying to set up my ipad synced up with itunes but now if i try to download any apps i put my password in then comes up with unknown error and wont download any help would be great
Reset your iPad and see if that helps.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. -
I just finished downloading and attempting the install of ios 7 on my iPhone 5. I'm using the newest version of iTunes.
And now, I'm stuck at the screen with the iTunes logo and the plug. But no matter how many times I try, recovery mode will not work. My phone is currently useless unless I can figure this out.No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine. -
After reformatting iPod to NTFS and restoring back with iTunes, the player works for two-three weeks and crashes afterward. It then requests to restore it through iTunes. When connected to iTunes, it sees it in the restore mode and also asks to restore the iPod. It happens over and over for the last months. What could be the problem?
iPod Classic 80Gig.
Thanks in advance.Dear planb77
Thanks for a reply. iPod does not support ntfs - you're right. that means it will never work on that. While restoring ipod using iTunes, itunes reformats it no matter what filesystem is there. So the issue is not that. ipod is now on fat32 and it works for a certain period of time, but then crashes and asks to restore through itunes. Resetting/restarting does not help. -
my kids entered the passcode several times wrong and now it is disabled and written on it"connect to itunes" , when i did connect it to itunes it said "can not connect to ipad because it is locked with a passcode" what can i do pls?
You may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad and restore/resync your content to it.
If you do it via a different computer that it's not normally synced to then (from here) :
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. -
I was restoring my iTouch and accidentally unplugged it and now it is stuck at the logo and loading bar under it. I can't go into DFU because the home button doesn't work. How can I fix it?
- See if placing the iPod in recovery mode with this program will allow a restore.
RecBoot: Easy Way to Put iPhone into Recovery Mode
- Next let the battery fully drain. After charging for at least an hour try again. -
I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?
Click here and follow the instructions.
(98897) -
My iphone 4 was crushed on the road. Bought a 4 replacement tried to restore it in itunes to get my contact info and it said there was a problem with my phone and I should contact apple store. What does that mean please?
Is the replacement exactly the same as the original ie same memory size & same version? If so it may require updating the OS software before trying to restore your stuff from the backup.
Maybe you are looking for
-
PDF Portfolio bug with acroread 9.4.2 Linux update
Since updating adobe reader on Linux to 9.4.2, when I open a PDF portfolio created with Acrobat for Windows 9.4.2, the initial page is completely blank. It should show a thumbnail of the first page of each file in the portfolio, and this initial page
-
KT6V AGP 8X flicker, totally stumped
I recently tried upgrading my aging GeForce 4 to a Radeon 9800 Pro and had nothing but problems (artifacts, flicker, etc.) The 9800 works fine in two other systems with nVidia chipsets, but not in the KT6V. To narrow the problem down, I tried a sligh
-
Funtion Modules Help Needed in Balvex01
I could not figure out how these function modules work please help me out thank you all REUSE_ALV_EXTRACT_AT_SELSCREEN REUSE_ALV_EXTRACT_AT_F4_P_EX1 REUSE_ALV_EXTRACT_AT_F4_P_EX1 REUSE_ALV_EXTRACT_SAVE REUSE_ALV_EXTRACT_LOAD
-
The trial version of Acrobat Pro is already on my computer; purchased it today; instructions say access through cloud.acrobat but the system keeps telling me to download. I just want to work. Do I really need to download again?
-
Any standard BAPI for CHARM_CREATE
Hello Experts, I have a scenario wherein the change request has to be created in SOLMAN from an external application. So, I would like to know if there are any standard BAPIs / interfaces for creating a change request in SOLMAN . Any pointers in this