Pushing a request from PSA..but says.."Request is already updated in cube"

Guys,
Pushing a request from PSA..but says.."Request is already updated in cube". I have deleted before scheduling from psa...i could see the request in yellow/not yet completed list.
I am couldnt find the request in the cube...but while pushing from psa it says"request already updated".
Pls Advice,,,Thanks!

Ganesh,
Goto Infocube Manage --> Reconstruction Tab --> select request --> Reconstruct and try..
Hope it Helps
Srini

Similar Messages

How to push a perticular request from PSA to Data target using DTP in BI

Hello all.
I have mulitple requests in PSA & wanted to move only perticular requests (Randomly, say first request & last request ) to data target using DTP in BI 7.0. How can we do this.. ? Is there any option in DTP (BI 7.0)for selective loading of requests from PSA to Data Target..
Thanks in advance..
Cheers,
sami.

Hi,
It is possible by using 'zero fetch' in DTP
If you want only the recent req to be loaded.
1. In PSA, change the status of the recent request to red
2. Do a zero fetch
that is processing mode - No data transfer; delta status in source: fetched
With this processing mode you execute a delta without transferring data.
3. change the particular request status back to green
4. Run a delta load
Regards,
Priya.D

Can not view data in a request from psa

Dear experts,
I have a problem with data in psa. If a select a mange of PSA, I see some request. I select one of them to see data. But there is no data. How is it possible?
If you delete a reques from psa, that request desappears from the psa, doesn't it?
Thanks in advance,
yeberri

it dosn't work. The problem is that you can see different green requests in manage from psa, but it is not possible to see internal data.
If I try to see data with se16 and the psa table, there are data for one request, but not for request that i need.
any idea? is very important to rescue this request.
thanks for your help.

I have just purchased a 5S iphone, when I tried to sync with my Imac it comes up with "...requires iTunes version 11.1 or later.." my iTunes version is 10.6.3, I rechecked software updates but says there is no updates required. help

I have just purchased a 5S iphone, when I tried to sync with my Imac it comes up with "...requires iTunes version 11.1 or later.." my iTunes version is 10.6.3, I rechecked software updates but says there is no updates required??? I checked when last auto update was done which was 01/07/12 I also tried downloading from web iTunes version 11.1.5 but it wont load because I don't have min version 10.6.8. What can I do to sort this out? Note: I am a not computer savy so be easy on me.

If your computer is running an OS X prior to Snow Leopard 10.6,
the answer (if it is an Intel-based Mac; not old PowerPC model)
would be to buy the retail Snow Leopard 10.6 DVD from Apple
for about $20, and install it. Then update that to 10.6.8 by using
the installed Snow Leopard online to get Combo Update v1.1 for
Snow Leopard 10.6.8. After that is installed & updated, run the
system's Software Update again, to see what else is available to
that system.
Later systems can then be looked into at Mac App Store, once
the computer is running Snow Leopard 10.6.8.
And if your computer is a Power PC (G4/G5, etc) and has no
Core2Duo kind of CPU -- See "About this Mac" in apple menu
to disclose the general info about your Mac. Also you can see
even more by clicking on "More Info" when looking in there...
If it isn't an Intel-based Mac, it can't run a system past 10.5.8.
Hopefully this helps.
Good luck & happy computing!

Purchased items not in library but itunes says it is already downloaded. It is in my i-phone library but when I try to download ot computer, it will not let me. It acknowledges that it is already purchased but says it is already donwloaded. It is not.

Purchased items not in library but itunes says it is already downloaded. It is in my i-phone library but when I try to download ot computer, it will not let me. It acknowledges that it is already purchased but says it is already donwloaded. It is not.

Having same problem, DId you ever figure out a solution

How to load a selective request from PSA to DSO using DTP?

Hi Gurus,
The PSA is having 3 requests, how to load the request number 2 from psa to DSO using DTP?
Thanks
SDP
Edited by: SDPSAP on Nov 15, 2011 7:58 PM

Let us say that requests are 1,2 and 3. 1 being the first one and 3 is the last one. Now you need to load request 2 in DSO from PSA.
- create a Delta DTP
- Tick "Only Get Delta Once"
- Tick "Get One Request Only"
- Untick "Reterive Until No More New Data"
- execute the DTP, it will load request 1 to DSO
- delete this request from DTP
- execute DTP again, it will load request 2 to DSO; this is what you need.
If DSO is write optimized, you do not need to untick "Reterive Until no More New Data"; just execute the DTP, it will create 3 requests in DSO, delete first and last and you will get only 2 in DSO.
I hope it helps.
Regards,
Gaurav

Deletion of last request from PSA & Cube

Hello Experts,
I have one Z Infocube in which daily full data had been uploaded....Now in PSA, i have uploaded monthwise data via full load process. but for the current month i have to daily delete the request and then execute the process chain. Is there any method or process type which I can add into process chain that deletes the last date request and same for the DTP Request.
Please help me out from this as i cant take full load daily.
Thanks in advance
Neha

Hi,
You can create a selective deletion program using the t-code DELETE_FACTS. Use this program in the process chain and provide variant to delete the previous request.
PSA Data Deleteion:
You can delete the request onderthan no.of Days.In the pC Process Types you will find option for Delete the PSA Data.
Deleting Requests from the PSA :
http://help.sap.com/saphelp_nw70/helpdata/en/b0/078f3b0e8d4762e10000000a11402f/frameset.htm
ABAP to delete a specific request (last one) from a Cube :
ABAP to delete a specific request (last one) from a Cube
Process Chain to Delete a previous request with overlapping values :
/message/6161074#6161074 [original link is broken]
Regards
Ram.
Edited by: Ramakanth Deepak Gandepalli on Dec 10, 2009 7:18 AM

Slow response when deleting from PSA or overlapping requests

Hi
We have experienced slow response times when the 'delete' jobs are kicked off from the process chain to delete PSA data as well as overlapping requests from cubes in the past two weeks. When displaying the processes via SM50 it appears that the job is not running, however in SM37 the status of the job is 'Active'. Eventually it does finish, but sometimes it times out. Any suggestions?

Hi
When it completes it does the correct deletion of the overlapping requests. It only cancels without a shortdump. Here is a job log of one of these jpbs:
14.02.2006 05:47:45 Job started
14.02.2006 05:47:45 Step 001 started (program RSPROCESS, variant &0000000670942, user ID ALEREMOTE)
14.02.2006 05:47:54 FB RSM1_CHECK_DM_GOT_REQUEST called from PRG RSSM_PROCESS_REQUDEL_CUBE; row 000214
14.02.2006 05:47:54 Request '437,729'; DTA '0PM_C01'; action 'D'; with dialog 'X'
14.02.2006 05:47:54 Leave RSM1_CHECK_DM_GOT_REQUEST in row 70; Req_State ''
After the last step, that is where the entire job comes to a halt. It stays like that until we manually cancels it or it finish some hours later. We have recently uploaded patch level 28 on BW 3.0B, and am not sure if that could be the cause.
Thanks :->

Do not Extract from PSA but Access Data Source (for Small Amounts of Data)

Hi Experts,
In the DTP, the above option is available for Full Loads for certain extractors but not for others, particularly, certain HR extractors?
Is there a way to make it available for HR extractors? Is there a setting that needs to be updated in ECC or in BI?
Thank you for your help!

Hi,
There is no special setting for this, Please see the detail description:
Data is not extracted from the PSA for the DataSource; it is requested from the data source directly at DTP runtime.
Use
You use this mode for small data sets and full uploads, for example, small sets of master data. With file source systems, note that the file has to be available on the application server.
Dependencies
You do not have to create an InfoPackage in order to extract data from the source.
Data in the data source is accessed in "direct access mode". This has certain consequences, especially if you are extracting data from SAPI systems:
Data is extracted synchronously. This places a particular demand on the main memory, especially in remote systems.
The SAPI extractors may respond differently than during asynchronous load since they receive information by direct access.
SAPI customer enhancements are not processed. Fields that have been added using the append technology of the DataSource remain empty. The exits RSAP0001, exit_saplrsap_001, exit_saplrsap_002, exit_saplrsap_004 do not run.
If errors occur during processing in BI, you have to extract the data again since the PSA is not available as a buffer. This means that deltas are not possible.
In the DTP, the filter only contains fields that the DataSource allows as selection fields. With an intermediary PSA, you can filter in the DTP by any field.
Regards,
Kams

Can't install a app but says I've already purchased it.

I'm trying to install a app called keynote. But I took it off my home screen because it wouldn't install so tried to reinstall it but it says I've already purchased it but the app won't download when I go to my App Store. And the app is no longer on my home screen. Anybody know what I should do? Or how it can be fixed?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
Downloading Past Purchases from the iTunes Store, App Store and iBooks Store
http://support.apple.com/kb/ht2519
 Cheers, Tom

App updated and syncing fine with ipad; updated from PC, but not for iphone. Updated on PC, but not on iphone

Product: iPhone 5
itune: 11.2.2.3; ios 7.1.1
iPhone 5 app updated fine from PC, but will not sync with iPhone.
Steps: Fire iTunes from PC, then connect iPhone, did app updates in iTunes, but did not sync with iPhone (the # updates stays the same next to "APP Store").
It worked fine for iPad App updates. I tried connect, disconnect, did not work. I also read some posted comments, but still cannot resolve the problem. Please help. Thanks!

Hello there, graced.
The following link from the iPhone Basics provides another way to update an app on your iOS device:
App Store - Learn more about iOS 7 and iPhone - Apple Support
http://support.apple.com/kb/index?page=tidetail&product=iphone&locale=en_US&tag= App%20Store#TI133
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Trying to download Illustrator but says it's already installed

Ordered the cloud but Illustrator won't install it says it's already installed

If you cannot find a copy of Illustrator on your computer, you will need to run the CS Cleaner tool:
http://www.adobe.com/support/contact/cscleanertool.html

I downloaded ios 6 for my iPad 2 and some of the upgrades went through but not all. It sounds like I need to reinstall ios 6. How do you do that? Everytime I try to upgrade it says I'm already updated

I downloaded ios 6 for my iPad 2 and some of the upgrades went through but not all. It sounds like I need to reinstall ios 6. How do you do that? Everytime I try to upgrade it says I'm already updated

If you mean Siri then that is only on the iPad 3, it is not on the iPad 2 in iOS 6 (possibly because the iPad 2 doesn't have the Audience chip which the iPad 3 does). If there are other things that you think are missing (YouTube has been removed, and Passbooks is iPhone and iPod Touch only) ?

End routine Works fine but missing some records while updating to cube.

Hi All
I have an issue here... My End routine works fine and I even debugged by putting the breakpoint and It fetches data from dso. strangely when I run my DTP the load is successful but I can see some of the records are missing. but there is data in dso and also when i debug the code it fetches the values for particular fields.
My requirement is I have a cube 'A' and under it DSO1 and I need six more fields from dso2. Now I made a look up for these six fields in End routine. My routine works fine and so the DTP Is Green. My issue is I cant see these six fields updated for some of the records.
PLZ put some light on it!!!!!!!!!!!!!!!!!

Hi Naveen & Jaya
Thanks for your quick response. Below is my code logic in end routine.
METHOD end_routine.
*=== Segments ===
    FIELD-SYMBOLS:
      <RESULT_FIELDS>    TYPE tys_TG_1.
    DATA:
      MONITOR_REC     TYPE rstmonitor.
$$ begin of routine - insert your code only below this line        -
... "insert your code here
data: lv_result_package like line of RESULT_PACKAGE,
      l_tabix type sy-tabix.
loop at RESULT_PACKAGE into lv_RESULT_PACKAGE.
   l_tabix = sy-tabix.
Update lot/decision attributes Lot/Decision ( ZQM_O04 ) DSO
   read table itab_qm_o04 into itab_qm_o04_wa
       with key insp_lot = lv_result_package-insp_lot.
   if sy-subrc = 0.
     lv_result_package-ivaluation = itab_qm_o04_wa-ivaluation.
     lv_result_package-catcode_ud = itab_qm_o04_wa-catcode_ud.
     lv_result_package-catgrp_ud = itab_qm_o04_wa-catgrp_ud.
     lv_result_package-/bic/zcattp_ud = itab_qm_o04_wa-/bic/zcattp_ud.
     lv_result_package-/b41/s_usuddate = itab_qm_o04_wa-/bic/gqmuddat.
     lv_result_package-/b41/s_usudcdate = itab_qm_o04_wa-/bic/gqmudcdt.
   endif.
   modify RESULT_PACKAGE FROM lv_RESULT_PACKAGE INDEX l_tabix.
endloop.
Well based on the insp_lot in ZQM_O03( DSO1) the logic above gets the six fields from ZQM_O04(DSO2) and feeds the cube.
The Insp_lot has multiple records in DSO1 based on specific characteristic and so the cube. This Logic gets all these six fields
from DSO2 which has single record per insp_lot and feeds the cube which has multiple records on insp_lot based on a specific characteristic. For some reason some of the records are not been updated to cube.
waiting for your valuable response.....
Thank You,
Abhishek Yeachni

How to push the data from PSA to Data Target in 3.5 version

Hi Experts,
I'm currently working on BI 7. I have some master data load being maintained in 3.5 version.
The infopackage has an option to load the data to psa and data target when extracted.
I want to stage the data at PSA only.
Later I want to trigger it to the target.
In 7 version we use DTP but I'm not very sure what should I do here.
Can anyone please help me to push the data to the target please using 3.5 version.
Thanks

Hi pathak,
Thanks for your reply. I'm able to do it.
Can you please tell me how do I filter the load to target.
We have filter in DTP where i can restrict the load.
Do we have any option in 3.5.
Please advice.
Thanks

Pushing a request from PSA..but says.."Request is already updated in cube"

Similar Messages

Maybe you are looking for