Pushing Configs to devices using Cisco Prime Infrastructure
Hi All,
I am trying to push a simple configuration to WLC using Prime Infrastructure. But it is failing as PI doesnot have RW SNMP access.
My question is that can I use PI to push configs without using SNMP. Like do it using ftp or something.
Also do the Wired Devices also need SNMP RW access on PI's part.
All your help is appreciated.
Mukul
You need SNMP RW.
If you use CLI template you need ssh/telnet credentials though.
Sent from Cisco Technical Support iPad App
Similar Messages
-
Is it possible to manage the switch SMB 300 series using Cisco Prime Infrastructure?
Is it possible to manage the switch SMB 300 series using Cisco Prime Infrastructure 1.2?
SF300 series is targeted for support in PI 2.0.
-
Cisco nexus 6001 not a supported device on cisco prime infrastructure 2.1?
I have installed Cisco Prime Infrastructure 2.2 and Prime Infrastructure still doesn't seem to support the Nexus 6001 platform? Can someone tell me if Cisco Prime Infrastructure will ever support the Cisco Nexus 6001 platform or is there any plans to support it in any future device packs?
The Nexus 6001 isn't currently supported in PI 2.1. There's no workaround except to wait for a device or product update that adds support. Right now I know the 9000 series is on the 2.2 roadmap but I haven't seen any reference to the 6001 and PI.
Interestingly, Prime LMS does support both the 6001 and 6004. Reference. -
We're upgrading from LMS 3.2 to Cisco Prime Infrastructure ...
In LMS 3.2 we're using netconfig all the time to configure various jobs related to port security
In installing Cisco Prime Infrastructure and working through it's use of templates, I'm having some difficulty finding out how to send out a notification once a configuration job has completed. It's so simple in LMS 3.2 since it's part of the job creation screens.
Any assistance would be greatly appreciated.HI, Raymond
Just wondering if this problem is resolved?
Thanks! -
Differences between clients and devices in Cisco Prime infrastructure
Hello
It seems to be a very simple question :
I read the Prime Licensing Guide in order to size the
right version of OVA to deploy in my datacenter .
I don't understand what is a "client" , because there is a topic about it in the data sheet :(cf joined pic)
could you please help me ?
Cheers ;Hi,
By client , it mean wired client like your laptop or wireless client like your smart phone
License is depended on the devices count not on client count.
Thanks-
Afroz
****Ratings Encourages Contributors **** -
Cisco Prime Infrastructure 2.0 -- Third Party Devices
Hello,
we are using cisco prime infrastructure 2.0. Is it possible to manage third party devices? (We have a lot of Enterasys Switches)
When i want to Archive the config of the device there is an error --> No Device Package found for the specific device.
It is necessary to install device packages for third party devices? Where can i find and install these packages?
Thx in advanceit seems not to be on the road-map according to the functional /feature comparison between LMS and PI 2.0:
http://www.cisco.com/en/US/partner/prod/collateral/netmgtsw/ps6504/ps6528/ps12239/guide_c07-729089.html
...and I doubt it will come (quickly) because config management has a lot of pitfalls and Cisco has a lot to do to get around all of them with their own devices..
However, Inventory Management for third party devices is on the road-map
older version of the document (feature comparison PI 1.2 - LMS 4.2) can be found here:
http://www.cisco.com/en/US/partner/prod/collateral/netmgtsw/ps6504/ps6528/ps12239/app_note_c27-716230.html -
Some question about Cisco Prime Infrastructure
Dear all
I have some question about using Cisco prime Infrastructure:
- Can I show how many user access to one Access Point (AP) ?
- If I can. What is display information of user ? etc Ip address, MAC, username access, name of device (notebook, tablet, phone ..)
- How many time do Cisco Prime Infrastructure refesh user informantion .?
Please help me and send picture about it if you can.
Thank you so much.Hi,
I don't have the Prime Infrastructure to post you image, but you can simply find all the answers you want on the config guide:
http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/1.2/configuration/guide/clientmgmt.html#wp1232242
1- You can surely find how many clients associated to a specific AP.
- Informaiton of the client usually includes username, SSID, ip address, mac address, RSSI, device vendor...etc. I don't think it contains the device type (ipad or iphone both appear as apple vendor. it does not destinguish between this and that.
3- The time of the refreshment is configurable. You need to configure the corresponding background task for the poll period. (this is also metnioned in the link above).
HTH
Amjad
Rating useful replies is more useful than saying "Thank you" -
Cisco prime infrastructure 2.2
Hello Team,
I did like to know how i can create a baseline template using Cisco prime infrastructure 2.2 in order to compare configuration of devices.
Also I would like to inquire how I can generate a CLI template and view the CLI template before applying/deploying it to a particular device or devices.
Best Regards,
TioluwaniHaving just started with Prime not that long ago, I'm afraid I can't help with your first question. However, for your second question:
Go to Configuration > Templates > Features and Technologies
Along the left menu, expand CLI Templates and click on CLI
This will bring up a new, blank CLI template to the right of the menu
Just fill out the info at the top section, and input your CLI/Velocity code in the bottom section
Once you have the code like you want it, click the "Save as New Template" button at the bottom
A window will pop-up asking where you want to save it within the "My Templates" folder
Once you've selected a location, click the Save button
Your window will automatically refresh to show the newly created custom CLI template - you will now have the option to edit your template as needed, or deploy it as-is to PI devices.
To deploy the template, select the Deploy button along the bottom
A new window will pop up that allows you to prepare and schedule the template. Select the device or devices you wish to deploy to. The devices you have available to deploy to will be based on the Validation Criteria you entered when creating the template.
If you opted to use the awesome variables available to CLI templates, you can either enter those for all selected devices in the Value Assignment section, or you can fill out the variables on a per-device basis. You will skip this section if you did not define any variables. If you did use variables, you must click the Apply button at the bottom of this section after you fill in the variables, or you will receive the following error:Mandatory fields are not entered for some devices or you have not saved your changes. To save the changes, click on Apply.
In the Schedule section, you can select when the template is deployed - "Now" is the default.
Finally, the Job Option section allows you to select how Prime handles a deployment failure, whether you want Prime to save the config to startup after the deployment, and whether you want to initiate a config archive after the deployment. -
I've got a handful of devices in Cisco Prime Infrastructure 2.0 which show up in the "Archive Failed Devices" view. The "Failure Reason" is some variation of "Fetch VLAN configuration - Command failed" sometimes including "TELNET: Failed to establish TELNET connection to x.x.x.x". What does this mean? How do I overcome this? In all cases, the device is configured to use SSH and has valid SSH credentials. In all cases, I can SSH from the command line of the NCS appliance to the devices listed in the "Archive Failed Devices" view.
Hi
I was able to fix the "Fetch VLAN configuration - Command failed" by allowing tftp from the device to PI server in firewall. See if this can help. -
Cisco Prime Infrastructure 2.0 Alarms (switch port down)
We have a cisco Prime Infrastructure 2.0 managing switches, routers and AP.
By default, when a port of a switch goes down, the cisco Prime Infrastructre generates a Critical Alarm for that. (this is a problem, because every phone of laptop disconnection will generate a critical alarm for me)
I found out that if we go to Administration --> Alarm Severity --> Link down, I can change the Alarm from Critical to another type of alarm.(ex: warning)
The problem is that I want to keep the Critical Alarm for my Uplinks ports and for some important switch ports, and I would like to make the alarm as warning for the normal user ports.
I know that I can create Port Groupping and add ports to each group and apply monitoring templates on those groups. But This couldn't Help me solving my alarm problem.
So I just need to know how to manage the alarms severity for each group of ports.
Thank youHi,
Same problem here.
I am using Cisco Prime Infrastructure 2.0 (evaluation version for 60 days). I want to deploy port monitoring for my trunk ports between switches and some other important ports e.g. servers. Basically I want to get alarms when these ports are down, there are errors on ports and etc.
So in Design>Port Grouping I created User Defined group with important ports. In Deploy>Monitoring Deployment I selected Interface Health (default)>Deploy selected Port Groups and when selected port group I created.
Now the rule shows Deployed: Yes and Status: Active. After that I just pulled out one port which was in monitored group, waited 5min as it is set in Interface Health (default) template, and nothing happened, and worse, alarms started to show up of other ports where regular users are connected (computers was turned off), which I do not want to see at all. I tried redeploy template, I even created my own template but still no desired result.
Any suggestions how to make port monitoring work? -
Cisco Prime infrastructure 1.2.1.012 -- HA issue
Hi All
I will explain the background before, our customer using Cisco Prime Infrastructure 1.2.1.012 and do HA. However I got error message wcss1 (in attaced file) from HA configuration. (First I had done HA configuration before and it worked. But I get error message wcss1 after i tested failover on cisco prime). I found bug case CSCud12229 that is same error message. But i still confuse with work around "Workaround:Change the database mode to Read-Write by executing query ?alter database open? or execute the shell script - /opt/CSCOlumos/bin/recover_HADeadLock.sh" anyone understand please help.
And another option I tried to upgrade with version 1.3 also but it have a bug no CSCud80157. It is the problem with HA registration fial so, i would like to ask you all that if i need to do HA on Cisco Prime infrastructure which version i should to install ? coz I saw 1.2 or 1.3 also have a bug with HA
Thanks
VHi rajeeshp,
Currently I am not allowed to upgrade it because of internal procedures involved in upgrading a specific piece of software (obtaining permissions from various departments). Is it free to upgrade from 1.2 to 1.3 or there is a specific charge for that.
Predrag Petrovic -
Is cisco prime infrastructure support / can be run as syslog server?
Dear All,
is cisco prime infrastructure support / can be run as syslog server?
and,
where i can see network topology diagram, using cisco prime infrastructure?
many thanks,
JerriHello. Cisco Prime LMS will be replaced by Cisco Prime Infrastructure in the near future.
In the current release of Cisco Prime Infrastructure you can't use topology diagrams. This feature is in roadmap.
About syslog, you can send syslogs to Cisco Prime Infrastructure, but I don't recommend using it as syslog server. Please see this link for more information https://supportforums.cisco.com/thread/2179520
Please rate if this helps -
Cisco Prime Infrastructure 2.0 and IPAM Solution
Hello everyone,
I'm student in a big company and my manager gave me a mission to study an IPAM solution.
In 3 month, we will use Cisco Prime Infrastructure 2.0
I turn to you cause I saw on this doc (link below) that CP Infrastructure 2.0 includes an IPAM Solution.
http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6491/ps11433/ps11480/ps11609/c45_658846_02_prime_aag.pdf
This IPAM Solution, is it just a repository to manage IP Adresse and DNS ?
Is it possible to write on DNS bind with IPAM of CP Infrastructure 2.0 ?
Thank you for your attention,
Cordially Vincent MaliquePas de problème Vincent.
The Network Registrar product is usually seen only in very large enterprises or service providers as it is designed to sale up to serving hundreds of thousands of addresses.
In smaller organizations looking to move beyond the spreadsheet method of keeping track of subnets, I have seen people have success with IPPlan (open source). Those wishing more functions and a supported product often go with SolarWinds IP Address Manager (IPAM) product. -
Cisco Prime Infrastructure 2.0 not showing alerts from switch
Hello,
I have a prime infrastructure 2.0 running at a customer place and the customer now complains that he is not receiving link up/down messages from the switch. When i checked I have seen that if I shut down a port in the switch the prime identifies after a long time, but its not generating an alarm still. How can I fine tune the prime to fix this issue. Please help on this.
Thanks in advanceHi,
Same problem here.
I am using Cisco Prime Infrastructure 2.0 (evaluation version for 60 days). I want to deploy port monitoring for my trunk ports between switches and some other important ports e.g. servers. Basically I want to get alarms when these ports are down, there are errors on ports and etc.
So in Design>Port Grouping I created User Defined group with important ports. In Deploy>Monitoring Deployment I selected Interface Health (default)>Deploy selected Port Groups and when selected port group I created.
Now the rule shows Deployed: Yes and Status: Active. After that I just pulled out one port which was in monitored group, waited 5min as it is set in Interface Health (default) template, and nothing happened, and worse, alarms started to show up of other ports where regular users are connected (computers was turned off), which I do not want to see at all. I tried redeploy template, I even created my own template but still no desired result.
Any suggestions how to make port monitoring work? -
Cisco Prime Infrastructure 2.0 - no traps/info are pushed from devices
Good evening,
I have setup Cisco Prime Infrastructure 2.0 and, though I have added manually my 4 network cores as devices without any problem, I can't get a single trap or a single SNMP information to be pushed into my Cisco Prime Infra.
Here is my SNMP config on my core :
snmp-server user *edited* *edited* v3
snmp-server group *edited* v3 noauth notify *tv.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF0F
snmp-server community *edited* RO
snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart
snmp-server enable traps flowmon
snmp-server enable traps transceiver all
snmp-server enable traps call-home message-send-fail server-fail
snmp-server enable traps tty
snmp-server enable traps rf
snmp-server enable traps memory
snmp-server enable traps cpu_threshold
snmp-server enable traps eigrp
snmp-server enable traps ospf state-change
snmp-server enable traps ospf errors
snmp-server enable traps ospf retransmit
snmp-server enable traps ospf lsa
snmp-server enable traps ospf cisco-specific state-change nssa-trans-change
snmp-server enable traps ospf cisco-specific state-change shamlink interface
snmp-server enable traps ospf cisco-specific state-change shamlink neighbor
snmp-server enable traps ospf cisco-specific errors
snmp-server enable traps ospf cisco-specific retransmit
snmp-server enable traps ospf cisco-specific lsa
snmp-server enable traps flex-links status
snmp-server enable traps fru-ctrl
snmp-server enable traps entity
snmp-server enable traps ethernet cfm cc mep-up mep-down cross-connect loop config
snmp-server enable traps ethernet cfm crosscheck mep-missing mep-unknown service-up
snmp-server enable traps ether-oam
snmp-server enable traps aaa_server
snmp-server enable traps flash insertion removal
snmp-server enable traps l2tc threshold sys-threshold
snmp-server enable traps power-ethernet police
snmp-server enable traps rep
snmp-server enable traps vswitch dual-active vsl
snmp-server enable traps udld link-fail-rpt status-change
snmp-server enable traps vtp
snmp-server enable traps vlancreate
snmp-server enable traps vlandelete
snmp-server enable traps auth-framework sec-violation
snmp-server enable traps dot1x auth-fail-vlan guest-vlan no-auth-fail-vlan no-guest-vlan
snmp-server enable traps envmon fan shutdown supply temperature status
snmp-server enable traps entity-diag boot-up-fail hm-test-recover hm-thresh-reached scheduled-test-fail
snmp-server enable traps port-security
snmp-server enable traps ethernet evc status create delete
snmp-server enable traps energywise
snmp-server enable traps ipsla
snmp-server enable traps vstack
snmp-server enable traps bfd
snmp-server enable traps bgp
snmp-server enable traps bulkstat collection transfer
snmp-server enable traps cef resource-failure peer-state-change peer-fib-state-change inconsistency
snmp-server enable traps config-copy
snmp-server enable traps config
snmp-server enable traps config-ctid
snmp-server enable traps event-manager
snmp-server enable traps hsrp
snmp-server enable traps ipmulticast
snmp-server enable traps isis
snmp-server enable traps msdp
snmp-server enable traps pim neighbor-change rp-mapping-change invalid-pim-message
snmp-server enable traps bridge newroot topologychange
snmp-server enable traps stpx inconsistency root-inconsistency loop-inconsistency
snmp-server enable traps syslog
snmp-server enable traps isakmp policy add
snmp-server enable traps isakmp policy delete
snmp-server enable traps isakmp tunnel start
snmp-server enable traps isakmp tunnel stop
snmp-server enable traps ipsec cryptomap add
snmp-server enable traps ipsec cryptomap delete
snmp-server enable traps ipsec cryptomap attach
snmp-server enable traps ipsec cryptomap detach
snmp-server enable traps ipsec tunnel start
snmp-server enable traps ipsec tunnel stop
snmp-server enable traps ipsec too-many-sas
snmp-server enable traps errdisable
snmp-server enable traps ethernet cfm alarm
snmp-server enable traps vlan-membership
snmp-server enable traps mac-notification change move threshold
snmp-server enable traps vrfmib vrf-up vrf-down vnet-trunk-up vnet-trunk-down
snmp-server host *ip-address-edited* version 3 noauth *edited*
Basically all traps are enabled but absolutely nothing is showing up in my Prime Infra except that my 4 devices are "Reachable".
Here is a show snmp on the same device :
sh snmp
Chassis: *S/N Edited*
38554534 SNMP packets input
0 Bad SNMP version errors
14 Unknown community name
0 Illegal operation for community name supplied
0 Encoding errors
38453185 Number of requested variables
0 Number of altered variables
17790703 Get-request PDUs
20583581 Get-next PDUs
0 Set-request PDUs
0 Input queue packet drops (Maximum queue size 1000)
38490708 SNMP packets output
0 Too big errors (Maximum packet size 1500)
0 No such name errors
0 Bad values errors
0 General errors
38371069 Response PDUs
13 Trap PDUs
SNMP global trap: enabled
SNMP agent enabled
SNMP logging: enabled
Logging to *edited*, 0/10, 13 sent, 0 dropped.
Can anyone point out what is wrong or missing in my configuration? I can't seem to single it out myself.
Thanks
JeremyHi Jeremy,
SNMP traps are shown in the events and alerts section of PI.
SNMP config looks fine. Can you run the SNMP debug (debug snmp packets ) .check the logs and see if the device is actually sending the TRAPS to the PI server.
Thanks-
Afroz
[Do rate the useful post]
****Ratings Encourages Contributors ****
Maybe you are looking for
-
IPhone 5S some music grayed out
I just got an iPhone 5S. Backed up my old phone to computer, and used this backup to get info, data and music onto new phone. After syncing the phone with iTunes on my computer, some songs on some albums are grayed out and have a red circle with a
-
Using my drive on another mac while mine gets repaired
Hi! Something is really wonky with my Macbook Pro's screen (about 1.5 inches on the right side of it the pixels are really distorted and jerking up and down), and I have a feeling it will need to be sent in for repairs when I take it to the apple sto
-
Ipod doesn't appear in itunes or on desktop - trouble transfering music
When connecting Ipod, it doesn't appear in itunes or on desktop (Windows). Attempted to fix. Reinstalled itunes and ipod, also upgraded itunes - no success in fixing. Restored ipod (through computer)- no success in fixing - and of course, lost all so
-
Hi Team I have a query about finding the number like input data like 1234528215 Then ouput should be Number--Repeted Count 1-----------2 2-----------3 3-----------1 4-----------1 5-----------2 8-----------1
-
Xserve deliver filling up system.log
Just checked my system.log after a hard crash and it seems to be constantly filling up with the following: Dec 18 15:33:23 xserve deliver[24559]: connect(/var/imap/socket/lmtp) failed: No such file or directory Dec 18 15:33:23 xserve deliver[24560]: