Pushing OM data through RHALEINI

Hi Friends,
We are pushing OM data through report RHALEINI. We have one requirement to lock some OM data. For example, there is one posiion which we dnt want to send at one time and our report is scheduled in batch job to send all change data. Is there any way to restrict one position, it can be many poistion or other objects. So we are looking some kind of config/lock option on object, so it should not process by report RHALEINI.
Thanks for your help.
Br,
Piyush

Hi Piyush,
If you are sure about which are the positions to be excluded then just mention those position ids in the exclude numbers tab and create a variant. You can use the same variant so that the position ids what you have given there would be excluded when you do the batch job processing and you need not to give them again and again.
Will this work for you?
Kind Regards,
Ravi.
Edited by: muktha ravi kumar on Jun 3, 2011 4:30 PM

Similar Messages

Pushing the data through proxy to ECC Developement as well as to quality

Hi all,
I need to push the data throug proxy from XI to ECC(developement system) at the same time to ECC(quality system)
What do we need to do from XI?
Thank you

In most setups you would have a DEV ECC box which points to DEV PI box and a QUAL ECC which points to a QUAL PI box . So in SPROXY of ECC you would be able to see the interfaces from either DEV or QUAL .
So, my assumtion is that you will not be able to do this unless both ECC boxes point to the same PI box. If tht is the case, you need to just add both ECC Bus Sys in the receiver determination and create 2 interface determinations.

Push MySQL data through XMLSocket?

If I have a flash file that is connected to a Red5 with an XMLSocket, how do I go about sending data from a MySQL database through that connection to the flash file? Do I need to make a Java file to run on the server?

Hi
RFC (Remote Function Call) is similar to the general SAP fun module: except that in the attributes you click the radio button: RFC enabled;
and you will be passing an Import parameter DESTINATION to it.
Other code and usage will be similar to any fun module;
Have a look at any fun module in SE37 to understand better about the different components of Fun modules;
Refer this link:
http://help.sap.com/saphelp_nw04/helpdata/en/22/042518488911d189490000e829fbbd/frameset.htm
check out the following link it might help you
http://help.sap.com/printdocu/core/Print46c/de/data/pdf/BCFESDE2/BCFESDE2.pdf
Reward points for useful Answers
Regards
Anji

Pushing out a billing date through a project - affect the pricing in a SO

Hello
I have two sales orders for a customer with same terms of payment, pricing procedure and everything almost similar except dates (say billing dates). the company is mainly using project systems. they are using billing plans. even the billing plans, billing types are also same.
The Issue is that, for one sales order it picking the Gross Value (present in document header -> Condition tab) as Net Value for the sales order. However for the another sales order it is picking the Total (present in document header -> Condition tab) as Net Value for the sales order.
Can anyone please explain me why the system is behaving like that, what is the mistake I did. I want the system to pick total value.
"pushing out a billing date through a project would affect the pricing in a sales order. the netted discount is not showing any more." - this is the issue
Thank You,
Gokul

I have Flip for Mac...
But do you have the paid for version or the free one?
The free version only lets you export half of the video up to a maximum of thirty seconds.

I have a Verizon 4g mifi, when I connect through my VPN I cannot push data through, it works fine on a 3G Any suggestions

I have a Verizon 4g mifi, when I connect through my VPN I cannot push data through, it works fine on a 3G Any suggestions

There are other things to try.
Turn WiFi off on the iPad, restart it and then turn WiFi on again.
Reset the network settings on the iPad. Settings>General>Reset>Reset Network Settings, that makes you have to start all over again.

Best way to push change data from sql server to windows/web application

i apologized that i do not know should i ask this question in this forum or not.
i have win apps which will load all data initially from db and display through grid but from the next time when any data will change in db or any data will be inserted newly in db then only change or newly inserted data need to be pushed from db side to
my win apps. now only sql dependency class is coming to my mind but there is a problem regarding sql dependency class that it notify client but do not say which data is updated or inserted.
so i am looking for best guidance and easy way to achieve my task. what will be the best way to push data from sql server to win or web client.
there is two issue
1) how to determine data change or data insert. i guess that can be handle by trigger
2) next tough part is how very easily push those data from sql server end to win apps end.
so looking for expert guide. thanks

Hello,
Yes, you can create DML trigger on INSERT and UPDATE to get the changed data into a temp table. And then query the temp table from application.
If you are use SQL Server 2008 or later version, you can also try to use
Change data capture, which
can track insert, update, and delete activity that is applied to a SQL Server table and store the changed values on the Change Table.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Servlet to push unsolicited data to clients

Hi,
I have a servlet in which messages are XML documents in the body of HTTP requests/responses. A client sends in the HTTP/XML request, the servlet delegates processing to some service provider, gets the result, and sends it back to the client as XML in the body of the response. That all works fine.
I now want to extend the servlet to handle the situation where unsolicited data (in XML) is pushed to the client. It is not a broadcast system, the unsolicited data would be targeted at a specific client (or maybe a small number of clients).
Any suggestions of the best way to approach this kind of facility?
Thanks,
Paul

The servlet does have some knowledge of clients through session information. All clients are required to log in so the servlet can store any information it wants about each client with a session. Of course, that doesnt give the servlet the ability to open a connection to a client.
I was hoping there might be some way for the client to open a persistent connection to the servlet which would be recorded in the session data. The servlet could then use this connection to push XML data to the client at arbitrary times.
In this system when I say client I don't mean a browser. The primary purpose of this interface is to allow other systems to access services.

Can't load data through smart view (ad hoc analysis)

Hi,
There is EPM application where I want to give ability to planners to load data through smart view (ad hoc analysis). In Shared Services there are four options in
EssbaseCluster-1: Administrator, Create/Delete Application, Server Access, Provisioning Manager. Only Administrator can submit data in smart view (ad-hoc analysis). But I don't want to grant Essbase administrator to planners, I'm just interested to give them ability to load data through ad-hoc analysis. Please suggest!

I take that you refreshed the Planning security, If not refresh the security of those users. Managing Security Filters
Check in EAS whether those filters are created with "Write" permissions.
Regards
Celvin
http://www.orahyplabs.com

How to push System-Data to the SLD ? NWA 7.11

How can i push the data from a J2EE-system to the SLD that is connected/configured in the NWA (Destinations) ?
In older versions of NWA there's being a 'collect and send'-button...
best regards
Christoph
Edited by: Christoph Bastian on Aug 17, 2011 3:46 PM

Hi,
Perhaps this link could help:
http://help.sap.com/saphelp_nwce711/helpdata/en/48/b6847d96655295e10000000a42189b/frameset.htm
The SLD_DataSupplier and SLD_Client destinations should be set in NWA -> Configuration Management -> Security Management -> Destinations
Next under Configuration Management -> Infrastructure Management -> SLD Data Supplier Configuration. Collect and Send exists to send the data to SLD.
Regards,
Srikishan

I am receiving the data through the rs232 in labview and i have to store the data in to the word file only if there is a change in the data and we have to scan the data continuasly how can i do that.

i am receiving the data through the rs232 in labview and i have to store the data in to the word or text file only if there is a change in the data. I have to scan the data continuasly. how can i do that. I was able to store the data into the text or word file but could not be able to do it. I am gettting the data from rs232 interms of 0 or 1. and i have to print it only if thereis a change in data from 0 to 1. if i use if-loop , each as much time there is 0 or 1 is there that much time the data gets printed. i dont know how to do this program please help me if anybody knows the answer

I have attatched the vi. Here in this it receives the data from rs232 as string and converted into binery. and indicated in led also normally if the data 1 comes then the led's will be off. suppose if 0 comes the corresponding data status is wrtten into the text file. But here the problem is the same data will be printed many number of times. so i have to make it like if there is a transition from 1 to o then only print it once. how to do it. I am doing this from few weeks please reply if you know the answer immediatly
thanking you
Attachments:
MOTORTESTJIG.vi ‏729 KB

How do I access session data through an EJB?

Hi
How do I access session data through an EJB?
I am currantly developing a Web service (using ejb's, JBoss.net and Apache Axis). A client making a call to this Web service, is expecting a bussiness-object in return. My problem is that this bussiness-object i stored in a users session data. How do I retrieve this bussiness-object from the users session.
I have read that this does not work with httpsessions, is this true? If this is true, is it possible to store the bussiness object in a JavaBean e.g:
<jsp:useBean id="userContextWebImpl" scope="session" class="com.ac.march.client.UserContextWebImpl">
<%
String key = "test";
String value = "This is the value";
userContextWebImpl.setValue( key, value1 );
%>
</jsp:useBean>
and then retrieve this information through the EJB? Or is it possible to do this by using Statfull JavaBeans? Or can this be done through a nother solution?
Please help!

I have created a JavaBean with scope="application" to store some data. The data is stored when a user prefomes a spesific task.
A different person then makes a call to a Web-Service on the server. The Web-Service then asks an EJB to retrieve the data stored in the JavaBean (servlet cotext). In other words: How do I retrieve this data from the EJB?
I have tried with this code, but with no luck.
(ApplicationContextWebImpl is the JavaBean)
public static String getBookingResult( String key )
     String myResult = null;
     String myKey = key;
     ApplicationContextWebImpl applicationContextWebImpl = null;
     try
          applicationContextWebImpl = new ApplicationContextWebImpl();
          myResult = (String)applicationContextWebImpl.getValue( key );
     catch ( java.rmi.RemoteException e )
     return myResult;
}

Importing of BPPayment Methods data through DTW

HI All,
Please explain how to upload BPPaymentMethods data through DTW?
Kind Regards
Silpa.N

You can use oBPPaymentMethods template to reach your goal through DTW. There are only 3 column needed to fill the teplate.
RecordKey is identifier. It has to be unique.
Linenum is (line number - 1) in that record.
PaymentMethodCode is Incoming or Outgoing
Hope this info is helpful to you.
Thanks,
Gordon

How to pass delivery date through BAPI while creating a sale order

Dear frndz,
     I am using 'BAPI_SALESORDER_CREATEFROMDAT1'
to create a sale order .
    I don't have any problem..
    But I have to pass schedule line delivery date through this bapi .
   I used REQ_DATE in structure BAPISCHDL.
   But I can' t get it.
   Through which parameter can i meet this..
   The sale order should be created line item wise along with my delivery date..
Any suggestions...
regards.
siva

Dear frnd,
    Danq for your response..I can't use DLV_DATE for this requirement..
    But I used REQ_DATE in the structure BAPISCHEDULE .
   I came to know that the problem i faced previously was only
internal data conversion.
    Now am able to pass my delivery date..
    so I am closing the thread..
Regards.
siva

Standard transaction CG02 is not saving the data through F4 help.

Hi Guru's,
I have a standard transaction CG02 for this i need to maintain the data for few of the fileds like Heat sensitive, Thermal energy hazard etc for updating Derived C-Alpha code. So for i can able to maintain data in two ways either directly or through F4 help. when i supply data through F4 help, on the F4 help window im providing the value and clicking on continue button. when i press on the contine button it has to update the Derived C-Alpha code if all the required fields filled. If suppose i do nt fill the required fileds it has to through the error message on the status bar like 'Invalid Data Combination'. Now the problem is when i clicking on continue button of F4 help window im displaying error message. when i try to change the value or try to fill the required fields so for im clicking on F4 button then its directly taking me out from the transaction. If i press on any key also samething is happening but the same is not happening when i supplied the value directly and saving. Please let me know the reason and help me for the same with needful solution. If anyting required plz ask me i wil provide u.
Here we are using the user-exit EXIT_SAPLC107_001 and is used in FM C107_CUSTOMER_FUNCTION_CALL.
Thanks in advance.
Yours,
Somu.

Hi Guru's,
I have a standard transaction CG02 for this i need to maintain the data for few of the fileds like Heat sensitive, Thermal energy hazard etc for updating Derived C-Alpha code. So for i can able to maintain data in two ways either directly or through F4 help. when i supply data through F4 help, on the F4 help window im providing the value and clicking on continue button. when i press on the contine button it has to update the Derived C-Alpha code if all the required fields filled. If suppose i do nt fill the required fileds it has to through the error message on the status bar like 'Invalid Data Combination'. Now the problem is when i clicking on continue button of F4 help window im displaying error message. when i try to change the value or try to fill the required fields so for im clicking on F4 button then its directly taking me out from the transaction. If i press on any key also samething is happening but the same is not happening when i supplied the value directly and saving. Please let me know the reason and help me for the same with needful solution. If anyting required plz ask me i wil provide u.
Here we are using the user-exit EXIT_SAPLC107_001 and is used in FM C107_CUSTOMER_FUNCTION_CALL.
Thanks in advance.
Yours,
Somu.

Error while Loading data through .csv file

Hi,
I am getting below date error when loading data through into Olap tables through .csv file.
Data stored in .csv is 20071113121100.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TE_7007 Transformation Evaluation Error [<<Expression Error>> [TO_DATE]: invalid string for converting to Date
... t:TO_DATE(u:'2.00711E+13',u:'YYYYMMDDHH24MISS')]
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TT_11132 Transformation [Exp_FILE_CHNL_TYPE] had an error evaluating output column [CREATED_ON_DT_OUT]. Error message is [<<Expression Error>> [TO_DATE]: invalid string for converting to Date
... t:TO_DATE(u:'2.00711E+13',u:'YYYYMMDDHH24MISS')].
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TT_11019 There is an error in the port [CREATED_ON_DT_OUT]: The default value for the port is set to: ERROR(<<Expression Error>> [ERROR]: transformation error
... nl:ERROR(u:'transformation error')).
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TT_11021 An error occurred moving data from the transformation Exp_FILE_CHNL_TYPE: to the transformation W_CHNL_TYPE_DS.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> CMN_1086 Exp_FILE_CHNL_TYPE: Number of errors exceeded threshold [1].
Any help is greatly appreciated.
Thanks,
Poojak

1) Wrong format, you wont get much support loading OLAP cubes in here I think.
2) Has your CSV file been anywhere near excel by chance the conversion of 20071113121100 to 2.00711E+13 looks very much like what I see when Excel has an invalid number mask / precision specified for a cell.
*** We are using EBS. File was already generated by consultants through SQL query. Getting error while loading though Informatica. Target table is setup as date datatype and source is String(19).
Expression in Informatica is setup as below.
IIF(ISNULL(CREATED_ON_DT), NULL, TO_DATE(CREATED_ON_DT, 'YYYYMMDDHH24MISS'))
Thanks,
Poojak

Pushing OM data through RHALEINI

Similar Messages

Maybe you are looking for