Pushing out Syslog setting with DHCP in IOS
I am troubleshooting a problem where AP's are failing over from the primary wlc to the secondary. It isnt a shortage of bandwidth on our MPLS cloud.
Would like to see about enabling syslog on the ap's in an individual office (I have dhcp running on the local site router at each office where I have lwap enabled AP's located. If I need to enable it from the controller, I am open to that but wanted see about minimizing the syslog traffic as I would prefer to only watch syslog traffic from a couple of offices that I am watching.
When I have a hard console connection into a LWAP while it is booting up, I have seen an error about not syslog or logging info provided by dhcp. That is what got me thinking about going in this direction.
Suggestions ?
I have this problem too since IOS7, except I don't have to switch my ipad off, I simply have to have not watched a video for a bit and when I switch back to the vid app it forgets all over again. VLC looks to be the much better app
Similar Messages
-
HT3228 This article is out of date with the current IOS version
Is there an update to this article available with te current options?
Here is current (iOS 7) documentation that should help:
iPad and iPad mini User Guide (For iOS 7 Software)Sep 18, 2013 - 21 MB -
I am trying to crunch out a .wmv from Final Cut for a client (they want a .wmv.) I shot in HD and used AVCHD file type. I pushed out the .mov with no problem. What are the best specs to use to push out a .wmv? I tried:
Export using: WMV 9 standard
CBR
Quality Sharp/Best
Bit rate 300
In the Advanced tab I did key frame every 8 seconds
Interlace lower field first
Output progressive
Audio 48kbps, 44.1 khz Mono
The audio sounds fine, but the image is skipping many frames and moving slow. I have Flip for Mac, so that is not the issue.
Thoughts?I have Flip for Mac...
But do you have the paid for version or the free one?
The free version only lets you export half of the video up to a maximum of thirty seconds. -
Issue with ARD 3.0 not pushing out Installs, Says its installing but not
Issue with ARD 3.0 not pushing out Installs, Says its installing but not
Has anyone seen this. It seems to happen with ARD 3, have not seen this in ARD 2.
I go to the Install Packages on Target Computers, put in: 10.4.7 Combo (for the correct CPU, PPC or Intel), security updates, QT 7.1.2, etc.
Push it to Macs I can connect to, observe and control.
The progress bar copies the files (in some instances it does not) and then it just hangs there, bar does not move, Installs never finish, not good, very odd.Is it the same clients that have the problem every time? Are those clients doing anything cpu intensive? Have you tried rebooting the affected clients?
Maybe try a smaller package on those clients. -
I was pushed into the sea with my iphone 5s in my back pocket, I got out and pulled my phone out of my back pocket and it turnt itself off. I went straight home and tried using a hair dryer but was unsucessful, put it in rice which also failed and i left it screen up on the radiator over night but still wouldnt turn on. It has charge on it although i still tried plugging it in to give it power and still was unable to power up. Can anyone give any suggestions on how i can fix it as for its not even 2 months old.
Watamu wrote:
Try putting it in rice for a few hours. It does sound daft but it did work for mine
If you're going to put a phone in rice (not daft at all, the rice acts as a dessicant), it needs to be for a few days, not a few hours. The OP stated in their post that the did put it in rice. In addition to the liquid damage, salt water is also much more corrosive to electronics than plain water. The rice won't help with the salt. -
I put my husband's apple id in when I started to set up icloud in error. I realized I needed to change this right away and tried to sign out and restart with my own apple id, but it won't let me sign out in the middle of setting up. It says something about if I don't sync documents, all documents will be deleted from this computer, but I don't want to download all his work documents. Is there any way for me to start over and fix this?
Having signed out as suggested above, go to http://appleid.apple.com and create a new Apple ID if you don't already have one. You will need a working email address which is different from that in the ID already in use.
The set up your Mac/device(s) as indicated here:
http://www.apple.com/icloud/setup/ -
I have a 3rd generation iPod Touch and just did the update to IOS 5. Now I can't connect to my Netgear wifi router. My iPhone connects fine along with all of my other laptops etc. I have the router set with WPA-PSK [TKIP] security and an access list. I've confirmed the mac address is included on that list and that the password is correct. Under choses netwrok I select the network and it just goes into a spin. I have tried removing the password and the access list settings and it still will not complete the connection to the router thus no internet access. The routers firmware is also up to date. This thing worked fine before this update and I've already tried to restore from backup. Any ideas or is the wifi nic bad in this thing with the new apple firmware update? Any fix?
Thanks Bob, I don't know why but it all of a sudden worked a few days later. It's a mystery but at least problem solved.
-
How do i get rid of a small box with AA in it on my main screen? cant figure out what setting it is on my samsung intensity ll ?
Good deal (the AA stands for Auto Answer, by the way; and I like your avatar )
-
Itunes 11.1.5 (MacBook Pro,OS 10.6.8) will not sync new apps with iPhone 5 iOS 7.0.6 and gives grayed out "install" no message? How does one work around this?
Just reboot your laptop... While its rebooting try to reboot your phone also by holding the home and power buttonn for 10-15 seconds...When your phone is turned off try to connect it to iTunes and it will recognize your phone in recovery mode.
If you have the .ipsw file for iOS 7.0.6 saved in your desktop then in itunes press shift and click on Restore.
Select the ipsw file and let it restore.
If you dont have it downloaded then simply click on restore.
I hope it works
Cheers ! -
My iPhone 4s does not ring for incoming calls. Ring tone set and used to ring. I think it has something to do with updating the IOS 7.0.4. When I updated to 7.0.3 the microphone stopped working. Had to call Apple Support and cleared phone and reloaded. ($57 charge). Any suggestions?
Start with your finger at the bottom of the screen (about even with the home button) and swipe in an upward motion. There should be a row of icons at the top of a grey field. if the quarter-moon icon is bright white, tap it. If it was (and still is) dark, take the iPhone in to be evaluated by a qualified technician.
-
with the new IOS 7 mi iPhone has problems with the screen, I go out once stripes, and Apple told me it is the software. help when there is a new update?????
We are users here. We cannot possibly know when a new update will be available.
-
With the new iOS 7 update. Does anyone know what the setting "Bold Text" means or will do? Obviously I do know what Bold Text is. It says if you click on this, it says it will restart your iPhone. Before I do this, I'm just wanting to be sure I know what's going to happen.
Thanks,
-LeeIt just reboots the device and bolds the system fonts. No harm done. If you don't like it, undo the setting, it will reboot and back to as it was.
-
Hi! I 've a problem with my ipad mini. Does anyone know if there is a way to get out from recovery mode without reinstall iOS?
Many thanks Deggie! I think my iPad has a big problem because is not possible to restore it....I downloaded the most upgraded version of iOS but when I try to restore an error message occurs (4005)......
-
Cisco 891 not getting IP address with DHCP with latest IOS
Hi,
I have a few Cisco 891 routers that are configured as DHCP clients on the WAN interface.
For some reason when I boot the router with a late IOS, the router is not receiving an address.
It works just as expected with the older IOSes.
Any ideas of what changed?
This is how the interface is configured:
interface FastEthernet8
ip address dhcp
no ip redirects
no ip unreachables
no ip proxy-arp
duplex auto
speed auto
no cdp enable
This IOS does not work:
c890-universalk9-mz.154-3.M2.bin
While these do work:
c890-universalk9-mz.150-1.M7.bin
c890-universalk9-mz.151-2.T2.bin
c890-universalk9-mz.152-1.T1.bin
Doing a "show ip interface brief" shows that FastEthernet8 is unassigned with the affected IOS.
With the older IOSes there is an IP address.
I had to downgrade two routers due to this issue, and did not have plenty of time to troubleshoot.
Both of the routers are connected to DSL from the same ISP...
Anyone seen anything like this before?Add another one to the list.
I have a MacBookPro3,1 that connects to WIFI no problem. It used to connect to ethernet when I originally bought it, however I've been using WIFI exclusively for the past 2 years.
Recently I had a need to connect via ethernet and it wouldn't work at home (apple airport router). I next tried connecting via ethernet at a friends house using a linksys WRT54G, no dice either. I have the computer in the lab today (University Network) and I get the same error. 3 different locations, 3 different routers, all same problem. It used to connect to home and university networks ethernet right away.
IP address assigned is 169.xxx.xxx.xxx - subnet - 255.255.0.0
no other info. It's showing up as connecting to the network, but unable to communicate with DHCP. It does work if I enter all of the information in manually.
At first I thought I had messed something up in networking preferences as I tend to play around with things alot. However I did a complete system format, and fresh install of OSX Lion and I still have the same problem, without any of my meddling around to confuse things.
What gives? -
How to find out how many recourds in recourd set with out while loop
hi
i want to findout how many recourds in recourd set
with out useing any loops like
while(rs.next())
count+=1;
like this
any mathod like(RecoundCount like )
pls help me
regards
kedarIf you dont want to use a scrollable result set do
sql="SELECT COUNT(*) AS COUNT FROM TABLE"
rs=stmt.executeQuery(sql);
rs.next()
count=rs.getString("COUNT");
Maybe you are looking for
-
NEW Satellite A505 - Blu-ray won't play on WinDVD or Toshiba DVD player
I purchased a Satellite A505 (Windows 7) with a Blu-ray disc player that was pre-loaded with WinDVD, Toshiba DVD player, and one other player (?) - all this software was added 12/21/2009 (by the manufacturer). When I put in a Blu-ray disc WinDVD stop
-
Filter by Variable - Embedded Applescript in Automator
I'm trying to make a workflow which when run will: Search my Downloads folder for .ash and .txt files, then search for files with the same name (and extension) in another folder (and its subfolders) called "New Location", and then move the new files
-
How do I get rid of an adobe textbox that shows up every time I open Firefox?
Adobe installed an update, I believe to my flashplayer and when it was finished, every time I opened my google page(Mozilla) I got a big box that said Adobe installer. There was no way to remove it so I went to add/delete programs and found the i
-
Hi there! Wanna see if you guys can help me out... Installed my versions of InDesign, Flash, Fireworks, Illustrator, Dreamweaver and Photoshop today. All of them worked out... except (there's always an exception, right?). My keyboard does not functio
-
I'd like to link a FM 9 document rather than import it. I'm not sure if I'm going about this correctly, but I've tried to create a blank project and then attempted to import the FM 9 book but the Import menu option is not available when I do this, on