Pushing Port Descriptions based on Client changes using PI2.0

Is it possible to write a template or job in PI to catch a trap for a client change on a wired network and push an interface description to the related interface based on that change ? For example, 802.1x client authenticates to port fa0/13 on switch1, trap is sent to prime (assuming one can be sent) prime runs a configuration template to update the description on that port with the 802.1x name of the client that authenticated ?
I can think of a few ways to do this using perl and snmp but am hoping that there is a way to do this with PI.
Thank you in advance for any assistance.
Dave

Hi Chris,
Prime can sense the TRAP but based on traps prime automatically create or push configuration template is not possible as far as I know.
Thanks-
Afroz
[Do rate the useful post]
****Ratings Encourages Contributors ****

Similar Messages

Assign Swtich Port Descriptions based on CDP, LLDP, or some type of Hostname Information

Hey guys,
I was wondering, is there a way to automatically change/assign the port Descriptions on my Cisco switches based upon information pulled from CDP or LLDP, or some type of hostname, that will go out, pull what device is plugged into that port, and insert description information about that device into the Port Description for that particular port that the device is plugged into?
Thank you for your help!
Michael

Good question!
You can do this with an eem applet policy.
below is a link that discusses it.
https://supportforums.cisco.com/document/100791/automatically-set-port-descriptions
hope this helps,
if so, please rate.
thanks

CER Use port description as port location

Hello all,
I am trying to confirm if this "feature" is as useless as I have found it to be. From my testing and what little documentation I can find when checking the "Use port description as port location" check box on the LAN switch details screen this will ONLY show you this information when looking at the switch port details screen. It DOES NOT actually use the switch port description as location information for the 911 call notifications.
My hope was that by checking this check box the switch port description would override the ALI location information configured within the ERL assigned to the switch port that the phone is connected to. This would allow the creation of one ERL/ALI per building say and the device specific room level information would simply come from the switch port description. With out this option a ERL/ALI has to be created for every room in the building.
Thank you all.

There's absolutely no problem in choosing 8888 as admin port while installing IWS in solaris Environment. Just make sure u follow these steps while installation:
(1)You should choose a random number for the administration server to make it harder for anyone to breach your server.
(2) Make sure the port you choose isn't in use. Look at the file /etc/services on the server machine to make sure you don't assign a port number that is reserved for another service. If you choose a port that is being used by another service, the installation program prompts you for another port.
(3)Note :If you choose a server port number lower than 1024, you must be logged in as root to start the server. After the server is bound to the port, the server changes from the root user account to the user account you specify. If you choose a port number greater than 1024, you don't have to be the root user to start the server.
Regards
T.Raghulan

SCCM Client Push Ports

Dears,
I need to understand more on SCCM 2012 Client push ports. I am pushing the client from primary site server.
As per MS, it’s recommended to have SMB open between site server and client systems.
My client is accepted to open SMB port (one way) between site servers to client. They are not accepting to open SMB between Clients to Site server.
I need your suggestion to have below network firewall ports are ok to work on client push.
Site Server -- > Client
Description
UDP
TCP
Service Message Blok
445
RCP Dynamic
DYNAMIC
Hypertext Transfer Protocol (HTTP)
80
Client -- > Site Server
Description
UDP
TCP
Hypertext Transfer Protocol (HTTP)
80
Or still we need to open SMB between clients to site server, if yes, please provide the justification.
Regards,
Kannan.CS
Regards, kanna

https://technet.microsoft.com/en-us/library/hh427328.aspx. SMB from client to server is not needed.
Torsten Meringer | http://www.mssccmfaq.de

How can I change java.policy at runtim on client machines using java webst?

Hi,
I have to change java.policy to launch my application through webstart to provide one RuntimePermission "permission java.lang.RuntimePermission "getClassLoader";"
Its because of a bug in java bug "_http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4809366_"
So, my problem here is, how can I do this dynamically on each client machine's java.policy.
I have spent time on this and found some alternatives
1. Specifying an Additional Policy File at Runtime by launching application "java -Djava.security.manager -Djava.security.policy=someURL SomeApp"
Please refer more on this "http://docs.oracle.com/javase/6/docs/technotes/guides/security/PolicyFiles.html"
But, here the problem is, how can I do this using webstart (expert.jnlp) file even though I have the "java-vm-args" tag, its not supporting this argument.
Please refer "http://docs.oracle.com/javase/6/docs/technotes/guides/javaws/developersguide/syntax.html#security";
2. Implementing the Policy in code.
But, not sure how to do this..
How can I grant the runtime permission on every user's machine dynamycally?
Here are some background details on this:
I am using java6 and weblogic 10.3.3.
Here is thing that I tried,
My application downloads a few jars to the client machines using java webstart and then it will get the initial context using the t3 protocal. The jars include wlclient.jar and ojdbc6.jar initially.
The problem here I was facing, when I tried request a bean, it is giving me the following exception in the client logs.It is requesting one state less session bean and I checked the server logs as well and the bean has returned the expected values properly.
But here I observed one more thing, before this request, one session bean(state less) has been requested successfully.
java.rmi.MarshalException: CORBA MARSHAL 0 No; nested exception is:
org.omg.CORBA.MARSHAL: vmcid: 0x0 minor code: 0 completed: No
at com.sun.corba.se.impl.javax.rmi.CORBA.Util.mapSystemException(Unknown Source)
at javax.rmi.CORBA.Util.mapSystemException(Unknown Source)
at com.mbt.expert.server.util._ServerDBQueryObjectRemote_Stub.getExchangeList(Unknown Source)
at com.mbt.expert.util.DBQueryObject.getExchangeList(DBQueryObject.java:419)
at com.mbt.expert.view.dialogs.OpenExchangeDialog.actionPerformed(OpenExchangeDialog.java:425)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEventImpl(Unknown Source)
at java.awt.EventQueue.access$000(Unknown Source)
at java.awt.EventQueue$1.run(Unknown Source)
at java.awt.EventQueue$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(Unknown Source)
at java.security.AccessControlContext$1.doIntersectionPrivilege(Unknown Source)
at java.awt.EventQueue$2.run(Unknown Source)
at java.awt.EventQueue$2.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.Dialog$1.run(Unknown Source)
at java.awt.Dialog$3.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Dialog.show(Unknown Source)
at com.mbt.expert.view.dialogs.OpenExchangeDialog.displayDialog(OpenExchangeDialog.java:606)
at com.mbt.expert.mdi.actions.OpenExchangeAction.execute(OpenExchangeAction.java:204)
at com.mbt.mdi.MDICommand.actionPerformed(MDICommand.java:47)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEventImpl(Unknown Source)
at java.awt.EventQueue.access$000(Unknown Source)
at java.awt.EventQueue$1.run(Unknown Source)
at java.awt.EventQueue$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(Unknown Source)
at java.security.AccessControlContext$1.doIntersectionPrivilege(Unknown Source)
at java.awt.EventQueue$2.run(Unknown Source)
at java.awt.EventQueue$2.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
Caused by: org.omg.CORBA.MARSHAL: vmcid: 0x0 minor code: 0 completed: No
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
at java.lang.reflect.Constructor.newInstance(Unknown Source)
at java.lang.Class.newInstance0(Unknown Source)
at java.lang.Class.newInstance(Unknown Source)
at com.sun.corba.se.impl.protocol.giopmsgheaders.MessageBase.getSystemException(Unknown Source)
at com.sun.corba.se.impl.protocol.giopmsgheaders.ReplyMessage_1_2.getSystemException(Unknown Source)
at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.getSystemExceptionReply(Unknown Source)
at com.sun.corba.se.impl.protocol.CorbaClientRequestDispatcherImpl.processResponse(Unknown Source)
at com.sun.corba.se.impl.protocol.CorbaClientRequestDispatcherImpl.marshalingComplete(Unknown Source)
at com.sun.corba.se.impl.protocol.CorbaClientDelegateImpl.invoke(Unknown Source)
at org.omg.CORBA.portable.ObjectImpl._invoke(Unknown Source)
... 80 more
The same is working in some other machine which are in different network. So, I have replaced the wlclient.jar with the wlthint3client.jar.
After replacing this jar I was getting the below exception in client logs while requesting a state less session bean.I also checked whether the request is reaching the server (bean) or not, but its not reaching the server.The problem is same at all the machines irrespective of the networks.
java.lang.AssertionError: Failed to generate class for com.mbt.expert.server.session.LoginSessionBean_tqw6yu_HomeImpl_1033_WLStub
at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerator.java:797)
at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerator.java:786)
at weblogic.rmi.extensions.StubFactory.getStub(StubFactory.java:74)
at weblogic.rmi.internal.StubInfo.resolveObject(StubInfo.java:213)
at weblogic.rmi.internal.StubInfo.readResolve(StubInfo.java:207)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at java.io.ObjectStreamClass.invokeReadResolve(Unknown Source)
at java.io.ObjectInputStream.readOrdinaryObject(Unknown Source)
at java.io.ObjectInputStream.readObject0(Unknown Source)
at java.io.ObjectInputStream.readObject(Unknown Source)
at weblogic.utils.io.ChunkedObjectInputStream.readObject(ChunkedObjectInputStream.java:197)
at weblogic.rjvm.MsgAbbrevInputStream.readObject(MsgAbbrevInputStream.java:598)
at weblogic.utils.io.ChunkedObjectInputStream.readObject(ChunkedObjectInputStream.java:193)
at weblogic.rmi.internal.ObjectIO.readObject(ObjectIO.java:62)
at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:240)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
at weblogic.jndi.internal.ServerNamingNode_1033_WLStub.lookup(Unknown Source)
at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:405)
at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:393)
at javax.naming.InitialContext.lookup(Unknown Source)
at com.mbt.expert.mdi.ExpertVariable.getLoginSession(ExpertVariable.java:455)
at com.mbt.expert.view.dialogs.Login.okPressed(Login.java:187)
at com.mbt.expert.view.dialogs.Login.keyPressed(Login.java:141)
at java.awt.Component.processKeyEvent(Unknown Source)
at javax.swing.JComponent.processKeyEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.KeyboardFocusManager.redispatchEvent(Unknown Source)
at java.awt.DefaultKeyboardFocusManager.dispatchKeyEvent(Unknown Source)
at java.awt.DefaultKeyboardFocusManager.preDispatchKeyEvent(Unknown Source)
at java.awt.DefaultKeyboardFocusManager.typeAheadAssertions(Unknown Source)
at java.awt.DefaultKeyboardFocusManager.dispatchEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.Dialog$1.run(Unknown Source)
at java.awt.event.InvocationEvent.dispatch(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
Caused by: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
at java.lang.reflect.Constructor.newInstance(Unknown Source)
at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerator.java:795)
... 55 more
Caused by: java.security.AccessControlException: access denied (java.lang.RuntimePermission getClassLoader)
at java.security.AccessControlContext.checkPermission(Unknown Source)
at java.security.AccessController.checkPermission(Unknown Source)
at java.lang.SecurityManager.checkPermission(Unknown Source)
at java.lang.ClassLoader.getSystemClassLoader(Unknown Source)
at weblogic.utils.classloaders.AugmentableClassLoaderManager.getAugmentableClassLoader(AugmentableClassLoaderManager.java:48)
at weblogic.rmi.internal.ClientRuntimeDescriptor.findLoader(ClientRuntimeDescriptor.java:254)
at weblogic.rmi.internal.ClientRuntimeDescriptor.getInterfaces(ClientRuntimeDescriptor.java:132)
at weblogic.rmi.internal.StubInfo.getInterfaces(StubInfo.java:77)
at com.mbt.expert.server.session.LoginSessionBean_tqw6yu_HomeImpl_1033_WLStub.ensureInitialized(Unknown Source)
at com.mbt.expert.server.session.LoginSessionBean_tqw6yu_HomeImpl_1033_WLStub.<init>(Unknown Source)
... 60 more
I have tried one more thing, I have taken all the required jars to one of the client machines and executed the main class (by setting the required class path) from cmd using java instead of javaws. Surprisingly, its working fine with out any problem using the wlthint3client.jar.
I also tried the same, by placing wlclient.jar using java in the same way(from cmd instead of javaws ), but I was facing the same exception while requesting the second session bean and found the same above exception in client logs.
To resolve this, I come across the java bug that I have given earlier "_http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4809366_".
In that page, I found a work around for this; suggested by bea to add the Runtime permission "permission java.lang.RuntimePermission "getClassLoader";" to the clients java.policy
So, please suggest me a way to resolve this problem.
Please suggest me if you have any other solutions for this problem.
Thanks in advance :)

I still think your problem is nothing to do with that ancient non-bug and that you should be looking elsewhere. You might be lucky and find someone here who can say "Ah, I know what that is" but I doubt it because since Oracle took over Sun this site has gone down hill big time.

ACE: Can I loadbalance based on client Source IP/and client tcp source port?

We recently migrated serving a client from being thick client at the desktop to being served via a citrix farm. Prior to the migration the clients came from about 5000 unique source IP's to their VIP, now they come from only 31 unique source IP's from the citrix servers in the farm. A citrix server can host 400 client sessions, since the default action of the ACE is to loadbalance based on source IP's, the ACE is sending up to 400 sessions from one citrix server to 1 real server in the farm. Is there anyway I can loadbalance based on client source IP and tcp source port so the ACE views the 400 sessions from one citrix server as unique sessions? The application does not require persistence.

Hello,
Yes, you can configure a "Sticky Layer 4 Payload" as descirbed on this Link:
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/ace/vA2_3_0/command/reference/sticky.html#wp1039276
Unfrotunately I do not have any working example. You must calculate the right values for the Offset and the Length to configure.
Regards Jean-Marc

Which ports does Webi Rich CLient use to connect to Universe etc..

Hello together,
we have the problem that we cannot run Rich Client from computers outside our network - so which ports does webi Rich Client use to connect to BO Serverl?.
It will always say universe not found. Login to rich client and everything else is possible.
It's not an authorisations problem, inside the network people can run the programs fine.
Thank you

Hi,
i assume you have enable CMS port on the firewall, apart from this you need to enable IFRS and Connection Server port also.
Regards,
Ramu.
Edited by: Gowda Timma Ramu on Oct 14, 2010 4:06 PM

The ports SQL clients would use ?

A Firewall is sitting between the Database Server and the SQL client. Ports 1433 (SQL default listen port) and 2383 (Analysis service) have been opened on firewall. However which ports should be opened on the firewall so that Client can reach the SQL
server on port 1433 ? I went through a MS KB article (http://support.microsoft.com/kb/287932) which talks about Clients connecting on Dynamic ports (1024 to 5000). So the query is do we need to keep 1024-5000 ports open ? If yes then can we force
the Client to use a particular port (assuming only client for example) so that only one port on Firewall can be opened.
Any help on this is appreciated.
~ Shekhar

Setup a fix IP port for SQL Server, then you Need only to open one port in Firewall on both Server and Client side; see
Configuring a Fixed Port
Olaf Helper
[ Blog] [ Xing] [ MVP]

Retrieve client side changes using componet binding

I have a selectBooleanCheckbox in my jsp bound to a HtmlSelectBooleanCheckbox.
On client side I have a js function that enable/disable the checkbox, I would like to know if is possible to get the client (changed) value by the component reference in my backbean.
How can I set the client "disable" attribute value in the server component on submit?

Not possible. That isn't been sent to the server as a request parameter. Best what you can do is to pass it along as a hidden input parameter, or to live with a cycle to the server on click.

I am trying to export the combained PDF based on BOOK opetion using below scripts. but i am getting following error message "Invalid value for parameter 'to' of method 'exportFile'. Expected File, but received 1952403524". anyone knows, please suggest me

Dear ALL,
i am trying to export the combained PDF based on BOOK opetion using below scripts. but i am getting following error message "Invalid value for parameter 'to' of method 'exportFile'. Expected File, but received 1952403524". anyone knows, please suggest me solutions.
var myBookFileName ,myBookFileName_temp;
                if ( myFolder != null )
                        var myFiles = [];
                        var myAllFilesList = myFolder.getFiles("*.indd");
                        for (var f = 0; f < myAllFilesList.length; f++)
                                    var myFile = myAllFilesList[f];
                                    myFiles.push(myFile);
                        if ( myFiles.length > 0 )
                                    myBookFileName = myFolder + "/"+ myFolder.name + ".indb";
                                    myBookFileName_temp=myFolder.name ;
                                    myBookFile = new File( myBookFileName );
                                    myBook = app.books.add( myBookFile );
                                   myBook.automaticPagination = false;
                                    for ( i=0; i < myFiles.length; i++ )
                                               myBook.bookContents.add( myFiles[i] );
                                    var pdfFile =File(File(myFolder).fsName + "\\"+myBookFileName_temp+"_WEB.pdf");
                                    var bookComps = myBook.bookContents;
                                    if (bookComps.length === 1)
                                                   bookComps = [bookComps];
                                     var myPDFExportPreset = app.pdfExportPresets.item("AER6");
                                    app.activeBook.exportFile(ExportFormat.PDF_TYPE,File("D:\\AER\\WEBPDF.pdf"),false,myPDFEx portPreset,bookComps);
                                  //myBook.exportFile (ExportFormat.pdfType, pdfFile, false);
                                  //myBook.exportFile(pdfFile, false, pdfPref, bookComps);
                                    myBook.close(SaveOptions.yes);

Change the below line:
app.activeBook.exportFile(ExportFormat.PDF_TYPE,File("D:\\AER\\WEBPDF.pdf"),false,myPDFExp ortPreset,bookComps);
to
app.activeBook.exportFile(ExportFormat.PDF_TYPE,File("D:\\AER\\WEBPDF.pdf"),false,myPDFExp ortPreset);
Vandy

HTTP redirect based on client IP

Hello,
Is anyone aware of a method to redirect an HTTP request based on the Client IP using ICM/Web Dispatcher?
The "icm/HTTP/redirect_" parameter doesn't appear to allow you to use the client IP as a criteria for the redirect, and I have not been able to find any other indication of how this might be accomplished on SMP, SDN, or Online Help.
The goal of this is to perform a protocol switch and redirect all HTTP requests from a specific IP range to HTTPS.
thanks!
John

Just a thought:
Have two instances of Web Dispatcher, listening on different ports.
Split incoming connections to different ports, whichever way is available:
1. Ask you network team to forward request from one subnet to one port and another subnet to another port.
2. On Windows server use RRAS
3. On any server use software routing;
4. Setup routing appliance before the server.
Not too elegant, but should work...
Regards,
Slava

Force a delete and push new filws to the client

HI,
We need to update an application published in Olite. This application is a .Net web site, pre-compiled. Every time the application changes, we need OracleLite to delete all the files and then push the new ones to the mobile units.
Actually, Olite pushes only the files that he determines have changed, but because of the nature of our files, we need it to replace them all. Also, it appears that if a file needs to be deleted, Olite will not delete the file.
I need to be able to force a full update (delete all files and push all files) on each client.
Can we use OTL language to build a command that could be sent to the client using the web Administrator? If yes, does someone have done that before and could help us develop with the OTL language.
Thank you
JSET

Hi Florent,
1. For the first error "The name has already been shared":
I recommend you can use the the cmdlet "Get-SMBShare" to list all share folders firstly before creating a new share, and check if there is share named "$unit" on remote server.
2. For the second error "The requested object could not be found":
According to your script, you want to creat a new share on remote computer, then add this share folder to the new created namespace on file server, please try the script below:
New-DfsnRoot -Type DomainV2 -TargetPath "\\$newDestServer\$unit" -Path "\\$RootNameSpace\$unit" -EnableSiteCosting $true
New-DfsnFolder -Path "\\$RootNameSpace\$unit\$site" -TargetPath "\\$newDestServer\$unit"
If there is anything else regarding this issue, please feel free to post back.
If you have any feedback on our support, please click here.
Best Regards,
Anna Wang
TechNet Community Support

Port Overlap occurred! Please change your entry!

Port Overlap occurred! Please change your entry!
I have a new out of the box WRT610N that is giving me this message when I try to forward different ports to the same internal port on separate machines.
Example1:
I want to forward external 3389 to internal 3389 on a machine 10.10.10.1
I want to also forward external 3388 to internal 3389 on another machine 10.10.10.2.
Example 2:
I want to forward 2 external ports to the same internal port on one machine.
external 3389 to internal 3389 on 10.10.10.1
external 3388 to internal 3389 on 10.10.10.1
(Some clients have 3389 blocked by ISA server. Hince fooling ISA by using a different port than RDP.)
Both examples give me a port overlap error.
This works fine with my old router that I am trying to replace.
I need a way to force the overlap. Please help.
And no I do not want.. and can't change the default port on the servers because the default ports are needed for internal server administration.

Yes, I have the same problem. I need to remote manage more computers but this bug in the firmware doesn't let me do it.
BTW, did anyone noticed that the manual says that blue light mean gigabit connection and green 100Mbps? So on your routers is exactly backwards...
Message Edited by Hagrid on 10-24-2008 08:05 AM
(Mod note: Edited for guideline compliance.)
Message Edited by kent07 on 10-24-2008 08:31 AM

How many servers Client is using now?

How many Servers Client is using now?
Please give me rough idea that how many servers will be there in Sand Box and Golden Box ie Dev-Test-Prod?

Hi SAP Landscape:
Landscape is like a server system or like a layout of the servers or some may even call it the architecture of the servers viz. SAP is divided into three different lanscape DEV, QAS and PROD.
- DEV would have multiple clients for ex: 190- Sandbox, 100- Golden, 180- Unit Test.
- QAS may again have mutiple clients for ex: 300- Integration Test, 700 to 710 Training.
- PROD may have something like a 200 Production.
- SANDBOX for research and development
These names and numbers are the implementer's discreet on how they want it or they have been using in their previous implementations or how is the client's business scenario.
Now whatever you do in the Sandbox doesn't affect the other servers or clients. Whenever you think you are satisfied with your configuration and you think you can use it moving forward, you RE-DO it in the golden client (remember, this is a very neat and clean client and you cannot use it for rough usage). As you re-do everything that you had thought was important and usable, you get a transport request pop up upon saving everytime. You save it under a transport request and give your description to it. Thus the configuration is transported to the Unit Test client (180 in this example).
You don't run any transaction or even use the SAP Easy Access screen on the 100 (golden) client. This is a configuration only client. Now upon a successful tranport by the Basis guy, you have all the configuration in the Testing client, just as it is in the Golden client. The configuration remains in sync between these two clients.
But in the Testing client you can not even access SPRO (Display IMG) screen. It's a transaction only client where you perform the unit test. Upon a satisfactory unit test, you move the good configuration to the next SERVER (DEV). The incorrect or unsatisfactory configuration is corrected in Golden (may again as well be practised in the sandbox prior to Golden) and accordingly transported back to 180 (Unit Test) until the unit test affected by that particular config is satisfactory.
The Golden client remains the 'database' (if you wanna call it that) or you may rather call it the 'ultimate' reference client for all the good, complete and final configuration that is being used in the implementation.
In summary:
Landscape : is the arrangement for the servers
IDES : is purely for education purpose and is NOT INCLUDED in the landscape.
DEVELOPMENT ---> QUALITY -
> PRODUCTION
DEVELOPMENT : is where the the consultants do the customization as per the company's requirement.
QUALITY : is where the core team members and other members test the customization.
PRODUCTION : is where the live data of the company is recorded.
A request will flow from Dev->Qual->Prod and not backwards.
1. Sandbox server: In the initial stages of any implementation project, You are given a sandbox server where you do all the configuration/customization as per the companies business process.
2. Development Server: - Once the BBP gets signed off, the configuration is done is development server and saved in workbench requests, to be transported to Production server.
3. Production Server: This is the last/ most refined client where the user will work after project GO LIVE. Any changes/ new develpoment is done is development client and the request is transported to production.
These three are landscape of any Company. They organised their office in these three way. Developer develop their program in Development server and then transport it to test server. In testing server tester check/test the program and then transport it to Production Server. Later it will deploy to client from production server.
Presentaion Server- Where SAP GUI have.
Application Server - Where SAP Installed.
Database Server - Where Database installed.

Iphone client application using SUP build problem

Hi,
I created client application for iphone. while building i am getting the following error Parse issue in the "SUPLogLevel.h" file like "Expected selector for objective-c method" at the
+(int)DEBUG method. Howevevr i did not change anything in that SUP given include file. Can anybody plese help me how to solve this.
Thanks in Advance.
bala

Hi Bala,
Did you manage to resolve this error?
I saw on a different post of yours that this was something to do with the version of SUP and SDK you were using at the time? Error while building SUP based iphone client application
Our developer is facing the same issue with her libraries now and I am trying to investigate where this comes from. Your insight will be very useful.
The issue takes place under the SUPLogLevel.h for the (int) Error method.
She mentioned that she updated her xCode recently. Is this something that may caused the issue?
Thanks in advance!!
George Lazaridis

Pushing Port Descriptions based on Client changes using PI2.0

Similar Messages

Maybe you are looking for