Put a variable in a path ?!

Hello all,
I cant figure out how to out a variable in a path.
these ares the "fixed" paths i have now
_root.alpha[var1 + "_movieclip"].label
_root.betas[var1 + "_movieclip"].label
What i want is to replace "alpha" and "betas" by a variable
"var2"
any help is welcome,
Regards,
Peter

The following Automator application has been successfully tested to do the following on Mavericks 10.9.5:
Get and pass an optional month value
Full month name (e.g. March)
Three character month name (e.g. Mar)
Month value as integer (e.g. March is 3)
Place the month value in a variable named CurrentMonth
Ask for Finder item(s)
Get the value of the CurrentMonth variable
Passes a list {filename, CurrentMonth} as an argument to:
Run AppleScript
Make a property for the containing folder for your "Month Announcements" folder
Get the list from 5
Set myFile to list item 1
Set myMonth to list item 2
Build the currentMonthFolder string
Check if the "Month Announcement" folder existsIf not, makes the folder
Moves the file to the appropriate "Month Announcements" folder

Similar Messages

Formula variable with replacement path to another input variable

Hi @ all,
i have a question regarding "Formula variable with replacement path to another input variable".
My Problem is that in selection screen and for info-fields the input variable is shown with its key and not with its description.
Scenario:
A formula variable (X) is used to get an input value of a characteristic variable (Y) for 0Fiscper3 to realize a IF-Then scenario.
The formula variable (X) uses replacement path by variable (Y) replace by "key".
In selection screen of the query variable (Y) is named with its key "ZAB_BUPE01" and not with its description " fiscal period". Same as for info-fields where the description is "ZAB_BUPE01" and not " fiscal period".
Does anybody have a solution to display the selection variable correctly?
Regards
Tobias

Issue Solved!
The input varaible (y) for 0Fiscper3 was saved globally on the InfoProvider. This results in that the formula variable with replacement path only shows its technical name. I put the input variable in the query itself and it soved the problem. The variable is displayed with its description in selection screen.
Regards

Issue - Formula Variable with Replacement Path

Hi,
Is it mandatory to include the base characteristics in the rows on which the formula variable(replacement path) is based on. As long as the base char is in the rows the variable works fine. The moment I take that off, the variable doesn't produce any result. I know the char can be put in the rows and can be hidden, but then in that case I don't get the desired aggregation level.
Has anybody come across this probelm and managed to sort this out? Kindly suggest any solution.
Thanks,
Anurag.

Hi,
a formula variable with replacement path only works if the replacement object is in the query in either the rows or colums. The data can never be aggregated on a higher level then the infoObject in the replacement path. If you want a higher aggregation you can add a new key figure as an attribute to your infoObject and fill it with the value you want in the loading process. You can use that key figure in your queries every way you want.
Kind regards,
Alex

Variable in a path

I have a variable, called "contentp". It get set by buttons
like so:
contentp = "p1";
I would like to use that variable in a path, but am not sure
how. I was
thinking something like the following, but get an error
message.
nav. + contentp + .enabled = false;
The error I am getting is:
Expected a field name after '.' operator.
What am I doing wrong? How can I work around that?
Thank you for any help!
Brian

Posting here as well...
Your getting there, sort of
Couple of changes.
1. change nav.btnDis.enabled = false; to read
nav[btnDis].enabled = false;
2. change the code in the buttons to read:
nav.p1.onRelease = function() {
btnDis = "p1";
contentBehaviors();
Note the order. I'm assuming you want to disable the button
that was just clicked on, and that's what this code does. Other
wise it won't disable until you click the *next* button. Also note
that the button is surrounded by quotes. That means your assigning
btnDis the value of "p1", a string. Then, when you call it in
enableBtns() using the line I gave you above your referencing the
string "p1" as an object (hence the [ ]'s ).
Let me know how it turns out.
Just for fun here is the entire AS code I used to test with.
I placed 4 buttons in a clip named nav, put the nav clip on a blank
stage and pasted the following AS into frame 1 of _root:
function disableBtns(){
//disable the buttons
nav.p1.enabled = false;
nav.p2.enabled = false;
nav.p3.enabled = false;
nav.p4.enabled = false;
function enableBtns(){
//enable the buttons after the opening sequence
nav.p1.enabled = true;
nav.p2.enabled = true;
nav.p3.enabled = true;
nav.p4.enabled = true;
nav[btnDis].enabled = false;
nav.p2.onRelease = function() {
btnDis = "p2";
contentBehaviors();
nav.p1.onRelease = function() {
btnDis = "p1";
contentBehaviors();
nav.p3.onRelease = function() {
btnDis = "p3";
contentBehaviors();
nav.p4.onRelease = function() {
btnDis = "p4";
contentBehaviors();
function contentBehaviors(){
enableBtns()
}

Error while creating a Characteristic Variable with Replacement Path

Hi all,
    I am trying to create the Characteristic Variable ZVLOWDT (Low Date') with Replacement Path on characteristic ZSTARTDT (Start Date) and it gives the error 'Source to replace 'Low Date' is not defined.
   I have created a User Entry Variable VAR_DATE (Start Date) with interval like '01/01/2009 - 01/15/2009' and Customer Exit variable ZVCPDAY (does some calculation based on the input of VAR_DATE) on the same ZSTARTDT characteristic. I want to get the 01/01/2009 (lower range date of the selection) into this Characteristic Variable ZVLOWDT. We are in BI 7.0 and the following are it's properties:
General Tab:
Description: Low Date
Technical Name: ZVLOWDT
Type of Variable: Characteristic Value
Processing by: Replacement Path
Reference Characteristic: ZSTARTDT Start Date
Details Tab:
Variable Represents : Single value
Variable is: Mandatory
Variable is Ready for Input : unchecked
Replacement Path Tab: Replacement Rule
Replace Variable with : Variable
Variable : VAR_DATE
Replace with : KEY
Why I am getting this error, PLEASE ?
Thanks,
Venkat.

Hi Khaja,
   We could derive a Variable value from another Variable with out Customer Exit. There is a white paper.
First have the User Entry Variable (ZV_X) and it accepts the date range like '01/01/2009 - 01/31/2009'. Next create the Characteristic variable (ZV_Y) of Replacement Path for which source variable will be ZV_X and we could get the 'FROM Date' (01/01/2009) from the selection (ZV_X) into it (ZV_Y).
While creating the Characteristic variable (ZV_Y) of Replacement Path, I didn't find my newly created ZV_X variable in the list of available variables under 'Variable' header in 'Replacement Path' tab and it is causing the error 'Source to replace variable ZV_Y is not defined'. How could I create the Characteristic variable of Replacement Path, PLEASE ?
Thanks,
Venkat.

BW 3.5 - Issue with formula variable with replacement path

Dear experts,
I'm facing an issue with formula variable with replacement path.
Just to clarify, I know replacement paths is raising a lot of questions but I've been using this functionnality extensively in the past, both in 7.0 and 3.5, so I'm not looking for basic information about how to use it.
I'm trying to setup a simple report that would show total values per plant of Purchase Order < 100
To do so I've setup a calculated key figure as follow:
VAR1 * ("PO value" < 100 ) * "PO value"
VAR1 is a formula variable with replacement path on 'purchase order' and value attribute 'constant =1'.
(The report has to show values summarized by plant but should not show the detail PO by PO, so I'm not looking at a solution based on condition)
The report as characteristic "plant" in rows and my CKF in columns.
Now let's take an example. I have 3 POs in Plant 1:
PO1 -> 150
PO2 -> 90
PO3 -> 80
Because of the variable with replacement path, the result in my query should be:
plant1 = 170 (even though characteristic "purchase order" is not in my rows, system should evaluate PO one by one and return values only for those two that are below 100).
But the result coming is 320, which is wrong.
I've done the same report on many other 3.5 systems and it worked perfectly, and I am not able to get proper support from SAP OSS who keep saying that this functionnality is not ready in 3.5 (although I've provided screenshot of this working on another 3.5 system!!! how frustrating...)
They have also pointed to problems of Before and After aggregation but that has absolutely no impact. Once again, the scenario is working perfectly on other 3.5 systems with the same query design, so i'm sure it has nothing to do with Query Designer options.
Would anyone have ever come to an equivalenet problem? I'm wondering whether the DB itself could not play a role in the variable with ref characteristic 'constant =1' ...
Any though is welcome!
thanks

Hi,
The text variable is replaced when the exact date is clear for this key figure column according to the restriction.
To achive this, please make sure that either the variable is directly restricted in the key figure selection, or that the date characteristic is in drilldown.
Regards,
Patricia

Variable with Replacement Path

Hi, I have two queries. The results of the first one should be the input for the second one. E.g. the first query shows a list of personnel numbers and additional information. These personnel numbers shall be overtaken by the second query. The personnel numbers belong to "Dimensions" in the Query Designer. I alread tried to create a variable with replacement path to the dimension personnel number. I implementet this variable in both the first and the second query (under: "rows"). It`s no "Formular variable" and no "Calculated Key Figure" but a "Characteristic Value Variable" of a Dimension. The problem is now that I cannot execute any of the two queries. The error "Abort the query cannot be released for OLE DB for OLAP. System error in programm CL_RSR_REQUEST and form PREPARE_VQUERIES:INVALID_
What is my mistake? Thank you in advance! Eve

Hi Eve,
It is possible to connect the 2 queries using a Replacement Path characteristic variable. You would need to create the variable on the char whose values you want to pass from Q1 to Q2. The variable will be of type replacement path and you will need to enter the name of Q1 from which it will get the values. Make sure that you include this char in the query definition of Q1 and Q2. In Q2 you will restrict the characteristic using this variable. DO not use this variable (replacement path) in Q1.
In your query properties check if you have turned on the checkmark for Release for OLE DB for OLAP (3rd tab). If the check mark is there, then remove it.
We are using the scenario in a couple of places, and it works very well.
Hope this helps...

Creating Variable with Replacement Path to get value from ANOTHER Variable

Hi all,
    Is anyone has created the Variable with Replacement Path to get the value from another User Entry Variable, PLEASE ?
First created the User Entry Variable (ZV_X) and it accepts the date range like '01/01/2009 - 01/31/2009'. Next created the Characteristic variable (ZV_Y) of Replacement Path for which source variable will be ZV_X and we should get the 'FROM Date' (01/01/2009) from the selection (ZV_X) into it (ZV_Y).
While creating the Characteristic variable (ZV_Y) of Replacement Path, I didn't find my newly created ZV_X variable in the list of available variables under 'Variable' header in 'Replacement Path' tab and it is causing the error 'Source to replace variable ZV_Y is not defined'. How could I create the Characteristic variable of Replacement Path for my requirement, PLEASE ?
The following is from help.sap..com:
Replace with Characteristic Value
Text and formula variables with the processing type Replacement Path can be replaced with a corresponding characteristic value. In the variable editor, on the General tab page, you specify under Reference Characteristic the characteristic that is to be referenced by the replacement. On the Replacement Path tab page, you can choose whether the variable is replaced with the From or the To Value and with the Key or the Name of the characteristic value. You can also specify the Offset Start and Offset Length for the output.
Replace with Variable
Characteristic value variables, hierarchy variables, text variables, and formula variables with the Replacement Path processing type can take their values from a different variable.
The following prerequisites need to be fulfilled:
Variable
●      The variable must not be input-ready
●      The variable must represent a single value
Source Variable
●      The source variable must not be a hierarchy node variable
●      The source variable must be input-ready
●      The source variable must be available in the query
●      The source variable must represent a single value or an interval
In the variable editor, on the Replacement Path tab page, you specify the source variable from which the value is to be determined. The value is either determined from the key, the external attribute of the key, the description, or the attribute value. You can specify an Offset Start and an Offset Length for the output here. The variable is replaced on the variable screen upon each data release.
Thanks,
Venkat.

Hi Eve,
It is possible to connect the 2 queries using a Replacement Path characteristic variable. You would need to create the variable on the char whose values you want to pass from Q1 to Q2. The variable will be of type replacement path and you will need to enter the name of Q1 from which it will get the values. Make sure that you include this char in the query definition of Q1 and Q2. In Q2 you will restrict the characteristic using this variable. DO not use this variable (replacement path) in Q1.
In your query properties check if you have turned on the checkmark for Release for OLE DB for OLAP (3rd tab). If the check mark is there, then remove it.
We are using the scenario in a couple of places, and it works very well.
Hope this helps...

Formula variable with replacement path on system date

Hi Experts,
I got a requirement to calculate "Days without payment" in report level.
Days without payment = System Date - Payment Date.
(Payment date field is available in CUBE, but system date field is not available in the CUBE)
As we know, the difference b/w 2 dates is not possible directly.It can be possible by creating 2 formula variables with replacement paths on the dates and by writing aformula on these 2 formula variables.
But the thing is I dont have system date readily available, and I tried by using SAP Exit. But we cant create formula variable replacement path on another variable (SAP EXIT).
Do we have any SAP variable for formula with replacement path readily avaliable to get system date (or) any other suggession.
Please suggest me.
Thanks,
Sai Chand.S

Hi Arminder,
Thanks for your valuable answer.
I tried doing the same previously.As u said we can get system date by creating customer exit variable.
But the thing is to find difference b/w 2 dates, we cant do it directly, we need to create 2 formula variables with replacement path.
1) Var1 = Formula variable with replacement path on system date(custoer exit variable).
2) Var2 = Formula variable with replacement path on paymanet date.
Number of days = var1 - var2.
But as in 1st point, we cant create formula variable with replacement path on another variable, as system date is already a variable of type customer exit.
We can create replacement paths only on characteristics.
Please suggest me .
Thanks,
Sai Chand.S

Formula Variable with Replacement Path - drillup ref.char and still working

Hi all,
I have a requirement, where formula variable (with replacement path) shouldn't work when I remove the reference characteristic from the rows. But this is not the case at the moment
I have 'Brand' and 'Material' in the rows and there is 'Material Indicator' in the columns. This 'Material Indicator' is a formula and there is formula variable in it with the type replacement path.
Reference char is 'Material'; Replace with 'Attribute Value' is selected also. As attribute I am selecting one of the attributes of the 'Material'.
In the report output, I am seeing relevant attribute values when Material is in the rows. But when I remove the Material from the report, I still see the values for this Material Indicator column. But I expect to see blank instead..
Can you please share your comments?
Thanks in advance.
S.P.

hi,
Irrespective of the drilldown on Material, the fomula variable will be replaced by material value. This is how replacement variable should behave. You might have to change the design. For more inputs, let me know your requirement exactly.

Formula variable using Replacement path not working

Dear All,
I am using a query to calculate YTD values in the report. I am using a formula variable to calculate the number of months. Formula is
Month To - Month From+1
When I am giving the range from 001 to 006 for period in th evariable screen,
I am gettung Month To as 6 and Month From as 6 with total no . of months as 1.
I think Month From is not being caculated properly. I created another formul variable using Replacement path, for characteristic Posting period, replace with a Key and dimension ID as number with out any offset.
Still not working.
Any suggestions.
Thanks and Regards,
Srini
Edited by: Srinivas on Apr 24, 2008 11:13 AM

Hello,
I have seen this document already. It is slightly different from what I am trying to do here than what the post shows. How ever, I did everything right, atleast seems to be and don´t know why I am not getting the From value from the posting period selected. To value variable is coming right.
Any more sugegstions.?
Thanks and Regards,
Srini

BEX 7.0: Formula variable with replacement path not working after BW Upg

Hi all,
We have a formula variable using replacement path for 0MATERIAL characteristic that is used in a calculated key figure, in order to perform conversion factor to change measure units (0MATERIAL attribute).
This was working pretty well until an upgrade from 3.5 to 7.0 EHP 1. The list that is displayed contains all key figures empty instead of the desired values.
Can anyone suggest what could be the possible reason for this?
Thanks in advance.
CCS

Hi all,
Problem solved!
The solution was based on the u201Chow to...Report Data in alternate units of measureu201D document (for 3x version) . http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b7b2aa90-0201-0010-a480-a755eeb82b6f?quicklink=index&overridelayout=true
Basically, the upgrade has override the previous changes made in the program LRRSVF20, like the "How to" document refers. Namely, the reference to YBW_AUNIT_ENHANCEMENT program.
We have carried out the changes and, apparently, the query is now working fine.
Thanks.
Best Regards,
Cátia Coelho Silva

Used of Sap text variable with replacement path in Bo designer

Dear experts,
I created a univers based on a SAp BW query. In this query I used a text variable in order to get dynamic header columns.
The text variable is done by using "replacement path" that is the text is derived automatically from the user input triggered by a sap bw variable.
example :
the query contains a restricted key figure which shows net values for a selected year based on variable PYEAR.
The name of this restricted keyfigure is &ZYEAR& where ZYEAR is the text variable with replacement path from the variable PYEAR.
When generated the univers based on this query I get component &YEAR&.
When I use this unvers in WebI my result containts header with &YEAR& althougth I selected for example the year 2006.
According to several how to and white papers on SDN , it seems that text variables with replacement path are supported. So I am disapointed by this result.
Can you give me advise to get a rigth result ?
thanks a lot
Olivier Doubroff

Hi Rishit,
I am trying to achieve the same as you, but it seems like text variables in restricted key figures do not work. I am using BO XI3.1 SP3 and SAP BW 7.01 SP6.
A work-around for me has been to use the "user response" function in webi to create a webi variable that holds the dynamic text title. If the user inputs Jan 2010, I change the input to a date using the "user response" and "ToDate" functions in the webi variable editor. After changing the input to a date I use the RelativeDate to extract 1 month (e.g. 25 days) from the user input. Then I have both Jan 2010 and Dec 2010 as webi variables to use as headers for my restricted key figures.
The formulas can easily become a little long, but by tweaking the user response string, you should be able to get dynamic headings by using webi functionality. But be aware that you need one webi variable for each dynamic heading if you use this method.
Let me know if it works or if I can help more:-)
Best regards,
Morten

Time Format using text variable with replacement path

Hi Friends,
I've used "Text variable with replacement path" to make the column heading dynamic by replacing the values referring from "0calday"...
everything is working fine, but here it is displaying the time format like
YYYYMMDD (20030101), i want it to be displayed DDMMYYYY (01012003) in the column heading... how to make it possible?
pls waiting for ur inputs, it's an urgent...
Regards,
Pattnaik

Hi Satyakam,
In the text variable properties make sure that in the replacment path you have chosen "Text" to appear date as per user setting . Other wise as in your case it must be set to "Key" which always shows in the format YYYYMMDD.
Hope that helps.
Regards
Mr Kapadia

Text Variable With Replacement Path : supported in Webi 4.0 or Not.??

Hello to All WebI Gurus,
We are on BO 4.0
We are building WebI report on top of Bex query using the BICS connection from IDT.
Our BW query is having some Text Variable with processing type "Replacement Path".
Also its having fiscal year period in filter with user input variable.
the text variables references Fiscal year period and are used in Key figure description,
hence whatever value the input variable will capture the description of Key figure changes accordingly/dynamically.
But when I try to use it in BO it throws me an error msg saying :
Unknown error occured in SL Services
I am Aware that text variable in this fashion were not supported in BO XI3.1
Used of Sap text variable with replacement path in Bo designer
So are Text variable Supported in BO 4.0 in this fashion.
Any response will be highly appreciable.
Thanks & Regards
Neeraj

Hi,
Here's a great SDN article, which includes several slides covering u201CWhich BEx features are supported using BICS connectivityu201D : http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d056e1bc-2794-2e10-959e-8779c5623cc5
Pages 8 -> 12 cover these topics.
If your design choices are compliant (supported) then i'd avise opening a support case if this issue persist after checking again on Patch2.11 (release recently)
Regards,
H

Put a variable in a path ?!

Similar Messages

Maybe you are looking for