Put "BigInt" value to a file in a unicode system

Hi there,
does anyone have an idea, how i am able to put a "BigInt"-value (i suppose, this is an ABAP INT4) into an interfaces file if the system is an unicode system?
I know the class cl_abap_char_utilities for to insert e.g. a tab character into a file under unicode conditions, but i don't know, how to move an INT4 value to a string oder char variable and to inhibit the system to convert anything, when writing to an ASCII file system.
Thanks in advance to any ideas!
Axel

Similar Messages

Unable to properly read a binary .xls file in a unicode system.

Hello,
We are currently upgrading to ecc 6 unicode
from a non unicode ecc5 system and we have
found several problems reading files for
Excel in place (sap office intergration).
We have an excel file with macros scripted
within it and it, parts of the file are in
hebrew.
We use open dataset for input command to
provide the data to the sap integration
methods.
In ecc5, no additional parameters were
needed for the command.
In the unicode system, the file isn't read
properly even when providing codepage for
the file in legacy binary mode (I tried '1800' and '1810' for hebrew).
When compared to a non unicode system, it seems
that some of the binary data is missing and some
characters are missing and instead appear
like squares.
this leads to the file not being read at
all.
Is there any method to read the file with
the characters in it properly , or force it
to use the non unicode read method?
Best regards, Yoav

Try the Acrobat forum; this is the Adobe Reader forum.

Sample Applescript: scraping values from numbers files into a master file

Hi, I have programming experience in c and other languages, but am new to applescript and so am learning a lot from this forum.
My goal is to make a timesheet system for my Dad (for a bday present) where every time he helps a client, he fills out a newly created numbers file - and after a week or so, he can run a script that scrapes certain values from each numbers file and places it into a master numbers file. Then saving and closing the file.
Vince, it sounds like you've written a script that does this feature of looping through all numbers files in a folder and putting select values from each numbers file into a master numbers file (after clearing the previous values of the master file).
Specifically, I'm looking for a sample script that opens up a numbers file, clears its table, then fills this table by scraping one value from a particular cell in every numbers file in a folder.
If anyone has a similar script they would be willing to post or email to me, for me to use as a foundation and to learn from, I would be very very very grateful. My email is forman.jq at gmail dot com.

I guess that this script may be a good starting point.
--[SCRIPT fromfolder_2spreadsheet1]
The target spreadsheet must be open at front and must contain the sheet sheet_destination which much contain the table table_destination.
Choose the folder supposed to store the source sopreadsheets.
Yvan KOENIG (VALLAURIS, France)
2010/08/18
--=====
(* Edit these height properties to fit your needs *)
property destination : "destinationDoc.numbers"
property sheet_destination : "destination"
property table_destination : "insert here"
property premierelignedestination : 2
property colonne_destination : 2
property ledossierhabituel : "Macintosh HD Maxtor:Users:yvan_koenig:Desktop:dossier habituel:"
property ligne_source : 2
property colonne_source : 2
--=====
on run
my activateGUIscripting()
Select the folder storing the spreadsheets from which we will extract values *)
set dossier_source to choose folder with prompt "Choose folder storing the Numbers documents…" default location (ledossierhabituel as alias)
Build a list of disk items available in the selected folder *)
tell application "System Events"
set les_elements to every disk item of folder (dossier_source as text) --whose (get type identifier) is in
set les_tableurs to {}
Extracts the list of the Numbers spreadsheets available in the selected folder *)
repeat with refsurelement in les_elements
if type identifier of refsurelement is in {"com.apple.iwork.numbers.numbers", "com.apple.iwork.numbers.sffnumbers"} then
copy path of refsurelement to end of les_tableurs
end if
end repeat
end tell -- System Events
if les_tableurs is {} then
No Numbers documents available so we stop the process. *)
set rapport to "The folder “" & dossier_source & "” doesn’t contain Numbers documents !"
else
set rapport to {}
end if
Check that the target Numbers document is open at front
and that it embed the defined sheet embedding the defined table. *)
tell application "Numbers"
activate
set existants to name of documents
if destination is not in existants then
copy "The document " & destination & " is not open !" to end of rapport
else
tell document destination
if sheet_destination is not in (name of sheets) then
copy "the sheet " & sheet_destination & " is unavailable in the document " & destination & " !" to end of rapport
else
tell sheet sheet_destination
if table_destination is not in (name of tables) then copy "The table " & table_destination & " is unavailable in the sheet " & sheet_destination & " of the document " & destination & " !" to end of rapport
end tell -- sheetSource
end if
end tell --document destination
end if
If target document is not at front or if it doesn't match the defined requirements,
we quit the process. *)
if rapport is not {} then error my recolle(rapport, return)
Clean the target table, minus row 1 supposed to be storing columns headers *)
tell document destination to tell sheet sheet_destination to tell table table_destination
set selection range to range ("A2 : " & name of last cell)
end tell --document destination
end tell -- Numbers
my selectMenu("Numbers", 4, 9) (* Suppress *)
set liste_valeurs to {}
tell application "Numbers"
repeat with un_tableur in les_tableurs
Open the spreadsheets and extract from each of them the wanted value *)
open un_tableur
tell document 1 to tell sheet 1 to tell table 1
set une_valeur to value of cell 2 of column 2
end tell
if une_valeur is 0.0 then
copy "empty" to end of liste_valeurs
else
copy une_valeur as text to end of liste_valeurs
end if
close document 1
end repeat
Now, it's time to insert the values in the target table *)
set ligne_destination to premierelignedestination
tell document destination to tell sheet sheet_destination to tell table table_destination
repeat with une_valeur in liste_valeurs
if not (exists row ligne_destination) then add row below last row
if une_valeur is not "empty" then
set value of cell ligne_destination of column colonne_destination to une_valeur
end if
set ligne_destination to ligne_destination + 1
end repeat
end tell -- document destination
save document destination
end tell -- Numbers
end run
--=====
on recolle(l, d)
local oTIDs, t
set oTIDs to AppleScript's text item delimiters
set AppleScript's text item delimiters to d
set t to l as text
set AppleScript's text item delimiters to oTIDs
return t
end recolle
--=====
on activateGUIscripting()
(* to be sure than GUI scripting will be active *)
tell application "System Events"
if not (UI elements enabled) then set (UI elements enabled) to true
end tell
end activateGUIscripting
--=====
my selectMenu("Pages",5, 12)
==== Uses GUIscripting ====
on selectMenu(theApp, mt, mi)
tell application theApp
activate
tell application "System Events" to tell process theApp to tell menu bar 1 to ¬
tell menu bar item mt to tell menu 1 to click menu item mi
end tell -- application theApp
end selectMenu
--=====
--[/SCRIPT]
I apologize, I'm too busy to write more explanations.
Yvan KOENIG (VALLAURIS, France) mercredi 18 août 2010 21:38:04

Powershell script - how to read a registry hive and store the value in text file and then again read the text file to write the values back in registry

Hi All,
powershell script Method required to read a value from registry and then taking the backup of that values in some text file.
For example the hive is
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Environment\Path
and under path i need to take back up of values in some text file and then put some value in the registry after back is taken in text file.
Also how to read the text file values so that we can again write to registry hive back from the back up text file.
Your help is much appreciated.
Umeed4u

I think you need to read this first:
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/a0def745-4831-4de0-a040-63b63e7be7ae/posting-guidelines?forum=ITCG
Don't retire TechNet! -
(Don't give up yet - 12,830+ strong and growing)

How to use FTP_COMMAND to put a file in the target system

Hi All,
I have the requirement to put an excel file from apllication server to another remote system for this i am using the function modules
1) FTP_CONNECT to connect to the sourece as well as the destination systems --- Here i am able to hit the both systems.
2) for sending the data to the target system i am using FTP_COMMAND by passing the 'put' statement along with the soruce and destinations for the command parameter.
See the bellow code
CONCATENATE 'put' v_fname '
' 'wbrs1\' folder
into cmd separated by space.
CALL FUNCTION 'FTP_COMMAND'
EXPORTING
   HANDLE                = dhdl
    command              = cmd
   COMPRESS              = 'N'
VERIFY                =
RFC_DESTINATION       =
IMPORTING
FILESIZE              =
FILEDATE              =
FILETIME              =
tables
    data                  = result
EXCEPTIONS
   TCPIP_ERROR           = 1
   COMMAND_ERROR         = 2
   DATA_ERROR            = 3
   OTHERS                = 4
Here v_name is the file path and name in the application server suppose say :
/usr/sap/TD2/DVEBMGS01/work/TD2_20060901_1008_WAY-LY.XLS
and wbrs1 is the target system and 'Waynesboro DFS' is the folder name i ma passing to the command .
Also I tried with the following statement
CONCATENATE 'put' v_fname '
' dhost folder
into cmd separated by space.
Here v_name is the file path and name in the application server suppose say :
/usr/sap/TD2/DVEBMGS01/work/TD2_20060901_1008_WAY-LY.XLS,
Dhost is wbrs1.wb.na.webdti.com
And Waynesboro DFS is the folder .
Here i am getting the error as invalid argument.
See the bellow messages from result internal table.
put /usr/sap/TD2/DVEBMGS01/work/TD2_20060901_1008_WAY-LY.XLS
wbrs1\ Waynesboro DFS
open /usr/sap/TD2/DVEBMGS01/work/TD2_20060901_1008_WAY-LY.XLS errno 22: Invalid argument
Please let me know how i can resolve this problem and how can I put this file in the destination system.
Thanks in advance.
Regards,
Venkat

check this code....here data is transferred from SAP to Informatica box..
REPORT zfo_phoenix_acc_reconciliation NO STANDARD PAGE HEADING
                                                MESSAGE-ID zz
                                                LINE-SIZE 255
                                                LINE-COUNT 65.
                        PROGRAM DECLARATION
PROGRAM ID            : ZFO_PHOENIX_ACC_RECONCILIATION
DESCRIPTION           : Phoneix Account Reconcilation Program-Feed
                        Balance sheet account balances from GL
                        3 files needed to be enhanced. The files are " Master
              Attribute File" & "Transaction File(GL Balance)". For
              Master Attribute File, data needs to be retrieved from
              T001, ZDATSRC_T, SKA1, T003, T856. The corresponding
              data from all the tables is downloaded into file
              according to the condition specified. For Transaction
              File, data needs to be retrieved from ZGEIST based on
              Ledger(GG), Record Type(0), Fiscal Year, Period(016).
              Then the current period is used to determine which TSLxx
              & KSLxx needs to be used. Also, the conditions are
              specified in specs which have been used accordingly.
              The final data fetched will need to processed as files
              which neednot be downloaded to Presentation/Application
              server. Instead the files are been FTPed to the
              Informatica Server using FTP. The location where the
              files need to be located is ERC\GLOBALSAP.
                     TABLES
TABLES : ADR6.
                     TYPES
Output File - Master COA(Chart of Account)
TYPES : BEGIN OF ty_coacode ,
         coa_code(20),         "COA Code
         coa_description(50), "COA Description
         field11 TYPE x,       "Line Feed
         END OF ty_coacode.
Output File - Master Account
TYPES : BEGIN OF ty_acctcode ,
         act_code(20),         "GL Account Number
         act_desc(60),         "GL Account Description
         act_act_flag(1),      "Account marked for deletion indicator
         glact_type(1),        "GL Account type
         fi_line(20),          "Corporate Financial Statement Line
         coa_code(20),         "COA Code
         act_defcode(3),       "Account Defination Code
         field11 TYPE x,       "Line Feed
       END OF ty_acctcode.
Output File - Master Entity
TYPES : BEGIN OF ty_entitycode,
         entity_code(12),     "Entity Code
         com_desc(40),        "Company Name
         coa_code(20),        "COA Code
         field11 TYPE x,      "Line Feed
        END OF ty_entitycode.
Output File - Master Attribute
TYPES : BEGIN OF ty_attribcode,
         attrib_code(5),       "Attribute Code
         attrib_value(20),     "Attribute Value
         attrib_desc(60),      "Attribute Description
         field11 TYPE x,       "Line Feed
        END OF ty_attribcode.
Output File - Transaction GL Balance
TYPES : BEGIN OF ty_glbal,
         gl_reccode(2),        "GL Reconciliation Code
         gl_entity(12),        "GL Entity - Company Code
         gl_accnum(20),        "Gl Group Account Number
         site(4),              "Site
         currency_type(6),     "Transaction Currency Code
         year(4) TYPE n,       "Year
         month(2) TYPE n,      "Month
         as_of_date(8),        "Date Account Balance
         tran_cur_amt(21),     "Transaction Currency Amount
         usd_amount(21),       "USD Amount
         racct(20),            "GL Account Number
         zzbewar(20),          "Consolidation Transaction Type
         zzdatsrc(20),         "Data Source
         zzblart(20),          "Document Type
         rassc(20),          "Trading Partner
         field1(20),           "Attribute field1
         field2(20),           "Attribute field2
         field3(20),           "Attribute field3
         field4(20),           "Attribute field4
         field5(20),           "Attribute field5
         field11 TYPE x,       "Line Feed
       END OF ty_glbal.
Output File - Control
TYPES :BEGIN OF ty_globalsap,
        clnt_name(6),          "Client Name
        source_name(12),       "Source Name
        as_of_date(8),         "AS of Date
        time_stamp(6),         "Time Stamp
        time_zone(8),          "Time Zone
        num_of_files(3),       "Number of Files
        num_of_records(9),     "Number of Records
        user_ids(60),          "User ID(s)
        field11 TYPE x,        "Line Feed
       END OF ty_globalsap.
Int'table to hold ZGEIST Data
TYPES : BEGIN OF ty_zgeist_data,
          rldnr    TYPE rldnr,      "Ledger
          rrcty    TYPE rrcty,      "Record Type
          rvers    TYPE rvers,      "Version
          ryear    TYPE gjahr,      "Fiscal Year
          rbukrs   TYPE bukrs,      "Company Code
          racct    TYPE racct,      "Account Number
          robjnr   TYPE gobjnr_r,   "Object Number for objects
          cobjnr   TYPE gobjnr_c,   "Object Number for transaction
          sobjnr   TYPE gobjnr_s,   "Object Number for partner
          rtcur    TYPE rtcur,      "Currency Key
          runit    TYPE meins,      "Base Unit of Measure
          drcrk    TYPE shkzg,      "Debit/Credit Indicator
          rpmax    TYPE rpmax,      "Period
          rzzstagr TYPE stagr,      "Statistical key figure
          zzaltkt TYPE altkt,      "Account Number in Group
          zzdatsrc TYPE zdatsrc,    "Data Source code
          zzbewar TYPE rmvct,      "Transaction Type
          zzblart TYPE blart,      "Document Type
          rassc    TYPE rassc,       "Trading Partner
          zzvbund TYPE rassc,      "Trading Partner
          tslvt    TYPE tslvt9,     "Transactional Currency
          kslvt    TYPE kslvt9,     "Group Currency
        END   OF ty_zgeist_data.
Int'table to hold ZGEIST Error Data based on conditions
TYPES : BEGIN OF ty_zgeist_error_data,
          rldnr    TYPE rldnr,      "Ledger
          rrcty    TYPE rrcty,      "Record Type
          rvers    TYPE rvers,      "Version
          ryear    TYPE gjahr,      "Fiscal Year
          rbukrs   TYPE bukrs,      "Company Code
          robjnr   TYPE gobjnr_r,   "Object Number for objects
          cobjnr   TYPE gobjnr_c,   "Object Number for transaction
          sobjnr   TYPE gobjnr_s,   "Object Number for partner
          rtcur    TYPE rtcur,      "Currency Key
          runit    TYPE meins,      "Base Unit of Measure
          drcrk    TYPE shkzg,      "Debit/Credit indicator
          rpmax    TYPE rpmax,      "Period
        END   OF ty_zgeist_error_data.
                     FIELD SYMBOLS
FIELD-SYMBOLS : <fs> TYPE ANY.
                     CONSTANTS
DATA : c_selected    TYPE c VALUE 'X', "Field for constant value 'X'
       c_y           TYPE c VALUE 'Y', "For Acc marked for deletion
       c_n           TYPE c VALUE 'N', "For Acc not marked for deletion
       c_a           TYPE c VALUE 'A', "For GL Account type Asset
       c_l           TYPE c VALUE 'L', "For GL Account type Liability
       c_q           TYPE c VALUE 'Q', "For GL Account type Equity
       c_r           TYPE c VALUE 'R', "For GL Account type Revenue
       c_e           TYPE c VALUE 'E', "For GL Account type Expense
       c_t           TYPE c VALUE 'T', "For GL Account type
       c_userid(60) TYPE c ,
       c_curtp       TYPE curtp VALUE '10', "Currency type
       c_curtp1      TYPE curtp VALUE '30', "Currency type
       c_rassc(5)    TYPE c VALUE 'RASSC', "Trading Partner
       c_dtsrce(6)   TYPE c VALUE 'DTSRC', "Data Source
       c_sacct(5)    TYPE c VALUE 'SACCT', "GL Account
       c_docty(5)    TYPE c VALUE 'DOCTY', "Document Type
       c_trxtp(5)    TYPE c VALUE 'TRXTP', "Transaction Type
       c_tradptn(15) TYPE c VALUE 'Trading Partner', "Trading Partner
       c_datsrc(11) TYPE c VALUE 'Data Source',      "Data Source
       c_glacc(10)   TYPE c VALUE 'GL Account',       "GL Account
       c_doctyp(13) TYPE c VALUE 'Document Type',    "Document Type
       c_trantyp(16) TYPE c VALUE 'Transaction Type'. "Transaction Type
                     DATA (Simple Fields)
DATA: w_cnt1         TYPE i, "No Of records in output file COA Code
      w_cnt2         TYPE i, "No Of records in output file Account
      w_cnt3         TYPE i, "No Of records in output file Entity
      w_cnt4         TYPE i, "No Of records in output file attribute
      w_cnt5         TYPE i, "No Of records in output file GL Balance
      w_tot_recs     TYPE i, "TOtal number of records downloaded
      w_date         LIKE sy-datum, "System date
      w_timediff     LIKE sy-uzeit, "Time Difference to GMT
      w_timezone(10) TYPE c,       "Time Difference to GMT
      w_file_count(3) TYPE n,       "File Count
      w_period TYPE poper,          "To hold Period Value
      w_year LIKE t009b-bdatj,      "To hold Fiscal Year Value
      w_outfile       TYPE char64, "FTPed file path
      w_hdl           TYPE i.       "Handle for FTP
                     INTERNAL TABLES
Intenal table for GL Account details
DATA: BEGIN OF it_gl_detail OCCURS 0,
          saknr      TYPE saknr,
          txt50_skat TYPE txt50_skat,
          xloev      TYPE xloev,
      END OF it_gl_detail.
DATA: it_company_list LIKE bapi0014_1 OCCURS 0 WITH HEADER LINE,
      it_coacode TYPE STANDARD TABLE OF ty_coacode WITH HEADER LINE,
      it_acctcode TYPE STANDARD TABLE OF ty_acctcode WITH HEADER LINE,
      it_entitycode TYPE STANDARD TABLE OF ty_entitycode
                                        WITH HEADER LINE,
      it_attribcode TYPE STANDARD TABLE OF ty_attribcode
                                        WITH HEADER LINE,
      it_glbal TYPE STANDARD TABLE OF ty_glbal WITH HEADER LINE,
      it_globalsap TYPE STANDARD TABLE OF ty_globalsap WITH HEADER LINE,
      it_t001 TYPE STANDARD TABLE OF t001 WITH HEADER LINE,
      it_zdatsrc TYPE STANDARD TABLE OF zdatsrc_t WITH HEADER LINE,
      it_ska1 TYPE STANDARD TABLE OF ska1 WITH HEADER LINE,
      it_t003 TYPE STANDARD TABLE OF t003 WITH HEADER LINE,
      it_t856 TYPE STANDARD TABLE OF t856 WITH HEADER LINE,
      it_zgeist_data    TYPE STANDARD TABLE OF ty_zgeist_data
                             WITH HEADER LINE,
      it_zgeist_data1   TYPE STANDARD TABLE OF ty_zgeist_data
                             WITH HEADER LINE,
      it_zgeist_data_all TYPE STANDARD TABLE OF zgeist,
      wa_it_zgeist_data1 TYPE ty_zgeist_data,
      wa_it_zgeist_data TYPE zgeist,
      it_zgeist_error_data TYPE STANDARD TABLE OF ty_zgeist_error_data,
      wa_it_zgeist_error_data TYPE ty_zgeist_error_data.
                     SELECTION-SCREEN
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-009.
SELECTION-SCREEN : BEGIN OF LINE,
            COMMENT 1(30) TEXT-006,
            POSITION POS_LOW.
PARAMETERS :       P_USER(30) TYPE C LOWER CASE OBLIGATORY.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
            COMMENT 1(30) TEXT-007,
            POSITION POS_LOW.
PARAMETERS :       P_PWD(30) TYPE C LOWER CASE OBLIGATORY.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
            COMMENT 1(30) TEXT-008,
            POSITION POS_LOW.
PARAMETERS :       P_HOST(64) TYPE C LOWER CASE OBLIGATORY.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
            COMMENT 1(30) TEXT-010,
            POSITION POS_LOW.
SELECT-OPTIONS :   S_EMAIL FOR ADR6-SMTP_ADDR NO INTERVALS.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN END OF BLOCK B1.
-- Password not visible--
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF screen-name = 'P_PWD'.
      screen-invisible = '1'.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
I N I T I A L I Z A T I O N                                         *
INITIALIZATION.
w_date0(2) = sy-datum4(2).
w_date2(2) = sy-datum6(2).
w_date4(4) = sy-datum0(4).
S_EMAIL-SIGN = 'I'.
S_EMAIL-OPTION = 'EQ'.
S_EMAIL-LOW = '[email protected]'.
APPEND S_EMAIL.
S_EMAIL-SIGN = 'I'.
S_EMAIL-OPTION = 'EQ'.
S_EMAIL-LOW = '[email protected]'.
APPEND S_EMAIL.
                     START - OF - SELECTION
START-OF-SELECTION.
Geting Company Details
PERFORM get_company_list.
Geting GL Account Details
PERFORM get_gl_acc_detail.
Geting GL Balance Details
PERFORM get_zgeist_data.
                     END - OF - SELECTION
PERFORM process_coacode.
PERFORM process_acctcode.
PERFORM process_entitycode.
PERFORM process_attribcode.
PERFORM process_glbal.
PERFORM process_ftp_file.
IF NOT it_zgeist_error_data[] IS INITIAL.
    PERFORM write_error_report.
ENDIF.
*&      Form GET_COMPANY_LIST
           Form to get Company List                                 *
FORM get_company_list.
CALL FUNCTION 'BAPI_COMPANY_GETLIST'
    TABLES
      company_list = it_company_list.
ENDFORM.                    "GET_COMPANY_LIST
*&      Form GET_GL_ACC_DETAIL
      Form to get the GL Account details                            *
FORM get_gl_acc_detail.
DATA : l_txt50 LIKE skat-txt50,
         l_tabix LIKE sy-tabix.
SELECT saknr xloev
    INTO TABLE it_gl_detail
    FROM ska1
    WHERE ktopl = 'G001'
    AND   ( saknr GE '1000000000' AND saknr LE '4500000000' ).
LOOP AT it_gl_detail.
    l_tabix = sy-tabix.
    SELECT SINGLE txt50
      INTO l_txt50
      FROM skat
      WHERE spras = 'EN'
      AND   ktopl = 'G001'
      AND   saknr = it_gl_detail-saknr.
    it_gl_detail-txt50_skat = l_txt50.
    MODIFY it_gl_detail INDEX l_tabix.
    CLEAR l_txt50.
ENDLOOP.
ENDFORM.                    "GET_GL_ACC_DETAIL
*&      Form PROCESS_COACODE
Form to Populate COA data to Output internal table IT_COACODE *
FORM process_coacode.
it_coacode-coa_code          = text-023.     "GLOBAL.
it_coacode-coa_description   = text-022.     "Global SAP for ERC
it_coacode-field11           = '11'.
APPEND it_coacode.
CLEAR it_coacode.
ENDFORM.                    "PROCESS_COACODE
*&      Form PROCESS_ACCTCODE
Form to Populate Account data to Output Internal table IT_ACCTCODE *
FORM process_acctcode.
DATA:l_saknr(10).
DATA : it_gl_detail2 LIKE it_gl_detail OCCURS 0 WITH HEADER LINE.
IF NOT it_gl_detail[] IS INITIAL.
    it_gl_detail2[] = it_gl_detail[].
    SORT it_gl_detail2 BY saknr.
    DELETE ADJACENT DUPLICATES FROM it_gl_detail2 COMPARING saknr.
ENDIF.
IF NOT it_gl_detail2[] IS INITIAL.
    LOOP AT it_gl_detail2.
      MOVE it_gl_detail2-saknr      TO it_acctcode-act_code.
      MOVE it_gl_detail2-txt50_skat TO it_acctcode-act_desc.
Check GL Account is marked for deletion or not
      IF it_gl_detail2-xloev     = c_selected.
        it_acctcode-act_act_flag = c_n.
      ELSE.
        it_acctcode-act_act_flag = c_y.
      ENDIF.
Determine GL Account type based on GL account number
      l_saknr = it_gl_detail2-saknr.
      SHIFT l_saknr LEFT DELETING LEADING '0'.
      IF l_saknr CP '1*'.
        it_acctcode-glact_type = c_a.
      ELSEIF l_saknr CP '2*'.
        it_acctcode-glact_type = c_l.
      ELSEIF l_saknr CP '3*'.
        it_acctcode-glact_type = c_q.
Start of Addition by C.Ramesh Babu on 11/04/2005   "DR1K907900
      ELSEIF l_saknr CP '4*'.
        it_acctcode-glact_type = c_l.
End of Addition by C.Ramesh Babu on 11/04/2005   "DR1K907900
      ELSEIF l_saknr CP '5*'.
        it_acctcode-glact_type = c_r.
      ELSEIF l_saknr CP '6*'.
        it_acctcode-glact_type = c_e.
      ELSEIF l_saknr CP '7*'.
        it_acctcode-glact_type = c_t.
      ENDIF.
      it_acctcode-fi_line      = 'CDR'.
      it_acctcode-coa_code     = 'GLOBAL'.
      it_acctcode-act_defcode = '001'.
      it_acctcode-field11      = '11'.
      APPEND :it_acctcode.
      CLEAR :it_acctcode,it_gl_detail2.
    ENDLOOP.
ENDIF.
ENDFORM.                    "PROCESS_ACCTCODE
*&      Form PROCESS_ENTITYCODE
Form to Populate Entiti data to Output file internal table        *
FORM process_entitycode.
IF NOT it_company_list[] IS INITIAL.
    LOOP AT it_company_list.
      SHIFT it_company_list-company LEFT DELETING LEADING '0'.
      MOVE it_company_list-company TO it_entitycode-entity_code.
      MOVE it_company_list-name1   TO it_entitycode-com_desc.
      it_entitycode-coa_code    = 'GLOBAL'.
      it_entitycode-field11     = '11'.
      APPEND it_entitycode.
      CLEAR : it_company_list,it_entitycode.
    ENDLOOP.
ENDIF.
ENDFORM.                    "PROCESS_ENTITYCODE
*&      Form PROCESS_ATTRIBCODE
    Form to Populate Attribute data to output file internal table   *
FORM process_attribcode.
Getting data from T001.
SELECT * FROM t001 INTO TABLE it_t001.
LOOP AT it_t001.
    MOVE c_rassc TO it_attribcode-attrib_code.
    MOVE it_t001-bukrs TO it_attribcode-attrib_value.
    MOVE c_tradptn TO it_attribcode-attrib_desc.
    it_attribcode-field11 = '11'.
    APPEND it_attribcode.
    CLEAR it_attribcode.
ENDLOOP.
Getting data from table ZDATSRC_T.
SELECT * FROM zdatsrc_t INTO TABLE it_zdatsrc.
LOOP AT it_zdatsrc.
    MOVE c_dtsrce TO it_attribcode-attrib_code.
    MOVE it_zdatsrc-zdatsrc TO it_attribcode-attrib_value.
    MOVE c_datsrc TO it_attribcode-attrib_desc.
    it_attribcode-field11 = '11'.
    APPEND it_attribcode.
    CLEAR it_attribcode.
ENDLOOP.
Getting data from table SKA1.
SELECT * FROM ska1 INTO TABLE it_ska1.
LOOP AT it_ska1.
    MOVE c_sacct TO it_attribcode-attrib_code.
    MOVE it_ska1-saknr TO it_attribcode-attrib_value.
    MOVE c_glacc TO it_attribcode-attrib_desc.
    it_attribcode-field11 = '11'.
    APPEND it_attribcode.
    CLEAR it_attribcode.
ENDLOOP.
Getting data from table T003.
SELECT * FROM t003 INTO TABLE it_t003.
LOOP AT it_t003.
    MOVE c_docty TO it_attribcode-attrib_code.
    MOVE it_t003-blart TO it_attribcode-attrib_value.
    MOVE c_doctyp TO it_attribcode-attrib_desc.
    it_attribcode-field11 = '11'.
    APPEND it_attribcode.
    CLEAR it_attribcode.
ENDLOOP.
Getting data from table T856.
SELECT * FROM t856 INTO TABLE it_t856.
LOOP AT it_t856.
    MOVE c_trxtp TO it_attribcode-attrib_code.
    MOVE it_t856-trtyp TO it_attribcode-attrib_value.
    MOVE c_trantyp TO it_attribcode-attrib_desc.
    it_attribcode-field11 = '11'.
    APPEND it_attribcode.
    CLEAR it_attribcode.
ENDLOOP.
ENDFORM.                    "PROCESS_ATTRIBCODE
*&      Form PROCESS_GLBAL
Form to Populate GL Balance data to Output file internal table    *
FORM process_glbal.
DATA : l_ctran_amt(21),
         l_cusd_amt(21).
LOOP AT it_zgeist_data INTO wa_it_zgeist_data1.
*Start of change by 501030559 on 11/04/2005
   it_glbal-gl_reccode = '04'.
     it_glbal-gl_reccode = '05'.
*End of change by 501030559 on11/04/2005
    it_glbal-gl_entity = wa_it_zgeist_data1-rbukrs.
    it_glbal-gl_accnum = wa_it_zgeist_data1-zzaltkt.
    it_glbal-site       = 'ERC'.
    it_glbal-currency_type = wa_it_zgeist_data1-rtcur.
    it_glbal-year = w_year.
    it_glbal-month = w_period.
    it_glbal-as_of_date = w_date.
    l_ctran_amt = wa_it_zgeist_data1-tslvt.
Put sign to left side of the value
    IF l_ctran_amt LT 0.
      TRANSLATE l_ctran_amt USING ' 0'.
      CALL FUNCTION 'CLOI_PUT_SIGN_IN_FRONT'
        CHANGING
          value = l_ctran_amt.
    ELSE.
Trailing Zero's to the value
      SHIFT l_ctran_amt RIGHT DELETING TRAILING space.
      TRANSLATE l_ctran_amt USING ' 0'.
      REPLACE '0' WITH '' INTO l_ctran_amt.
    ENDIF.
    it_glbal-tran_cur_amt = l_ctran_amt.
    l_cusd_amt = wa_it_zgeist_data1-kslvt.
Put Sign to leftside of the value
    IF l_cusd_amt LT 0.
      TRANSLATE l_cusd_amt USING ' 0'.
      CALL FUNCTION 'CLOI_PUT_SIGN_IN_FRONT'
        CHANGING
          value = l_cusd_amt.
    ELSE.
Trailing Zero's to the value
      SHIFT l_cusd_amt RIGHT DELETING TRAILING space.
      TRANSLATE l_cusd_amt USING ' 0'.
      REPLACE '0' WITH '' INTO l_cusd_amt.
    ENDIF.
    it_glbal-usd_amount = l_cusd_amt.
    it_glbal-racct   = wa_it_zgeist_data1-racct.
    it_glbal-zzbewar = wa_it_zgeist_data1-zzbewar.
    it_glbal-zzdatsrc = wa_it_zgeist_data1-zzdatsrc.
    it_glbal-zzblart = wa_it_zgeist_data1-zzblart.
    it_glbal-rassc = wa_it_zgeist_data1-rassc.
    it_glbal-field11 = '11'.
    APPEND it_glbal.
    CLEAR : wa_it_zgeist_data1, it_glbal.
ENDLOOP.
ENDFORM.                    "PROCESS_GLBAL
*&      Form PROCESS_GLOBALSAP
   Form to Populate COntrol data to Output file internal table      *
FORM process_globalsap.
DATA :l_total(9),
        l_len(3) type c.
Logic to get Time Zone
w_timediff = sy-tzone.
IF sy-tzone LT '0'.
    w_timediff = sy-tzone * -1.
    CONCATENATE 'GMT-' w_timediff(4) INTO w_timezone.
ELSE.
    w_timediff = sy-tzone.
    CONCATENATE 'GMT+' w_timediff(4) INTO w_timezone.
ENDIF.
LOOP AT S_EMAIL.
    CONCATENATE C_USERID S_EMAIL-LOW ',' INTO C_USERID.
ENDLOOP.
l_len = strlen( c_userid ).
l_len = l_len - 1.
c_userid = c_userid+0(l_len).
it_globalsap-clnt_name    = 'ERC'.
it_globalsap-source_name = 'GLOBALSAP'.
it_globalsap-as_of_date   = w_date.
it_globalsap-time_stamp   = sy-uzeit.
it_globalsap-time_zone    = w_timezone.
it_globalsap-num_of_files = w_file_count.
MOVE w_tot_recs TO l_total.
SHIFT l_total RIGHT DELETING TRAILING space.
TRANSLATE l_total USING ' 0'.
it_globalsap-num_of_records = l_total.
it_globalsap-user_ids = c_userid.
it_globalsap-field11 = '11'.
APPEND it_globalsap.
CLEAR it_globalsap.
ENDFORM.                  "PROCESS_GLOBALSAP
*&      Form COUNT_RECORDS
Form to count total number of records Downlaoded                   *
FORM count_records.
DESCRIBE TABLE it_coacode    LINES w_cnt1.
DESCRIBE TABLE it_acctcode   LINES w_cnt2.
DESCRIBE TABLE it_entitycode LINES w_cnt3.
DESCRIBE TABLE it_attribcode LINES w_cnt4.
DESCRIBE TABLE it_glbal      LINES w_cnt5.
w_tot_recs = w_cnt1 + w_cnt2 + w_cnt3 + w_cnt4 + w_cnt5.
ENDFORM.                    "COUNT_RECORDS
*&      Form get_zgeist_data
Form used to fetch data from ZGEIST table for the GL BAL file
FORM get_zgeist_data .
PERFORM get_period_year.
SELECT * INTO TABLE it_zgeist_data_all
           FROM zgeist
           WHERE rldnr EQ 'GG'
           AND   ryear EQ w_year
           AND   rrcty EQ 0
           AND   rpmax EQ '016'
           AND ( zzaltkt GE '1000000000' AND zzaltkt LE '4500000000' )
           AND   rzzstagr = space.
sort it_zgeist_data_all by rbukrs rldnr zzaltkt racct
                             zzdatsrc zzbewar zzblart rtcur rassc.
LOOP AT it_zgeist_data_all INTO wa_it_zgeist_data.
    IF wa_it_zgeist_data-zzaltkt EQ space.
      wa_it_zgeist_error_data-rldnr = wa_it_zgeist_data-rldnr.
      wa_it_zgeist_error_data-rrcty = wa_it_zgeist_data-rrcty.
      wa_it_zgeist_error_data-rvers = wa_it_zgeist_data-rvers.
      wa_it_zgeist_error_data-ryear = wa_it_zgeist_data-ryear.
      wa_it_zgeist_error_data-rbukrs = wa_it_zgeist_data-rbukrs.
      wa_it_zgeist_error_data-robjnr = wa_it_zgeist_data-robjnr.
      wa_it_zgeist_error_data-cobjnr = wa_it_zgeist_data-cobjnr.
      wa_it_zgeist_error_data-sobjnr = wa_it_zgeist_data-sobjnr.
      wa_it_zgeist_error_data-rtcur = wa_it_zgeist_data-rtcur.
      wa_it_zgeist_error_data-runit = wa_it_zgeist_data-runit.
      wa_it_zgeist_error_data-drcrk = wa_it_zgeist_data-drcrk.
      wa_it_zgeist_error_data-rpmax = wa_it_zgeist_data-rpmax.
      APPEND wa_it_zgeist_error_data TO it_zgeist_error_data.
    ELSE.
      it_zgeist_data1-rbukrs   = wa_it_zgeist_data-rbukrs.
      it_zgeist_data1-rldnr    = wa_it_zgeist_data-rldnr.
      it_zgeist_data1-zzaltkt = wa_it_zgeist_data-zzaltkt.
      it_zgeist_data1-racct    = wa_it_zgeist_data-racct.
      it_zgeist_data1-zzdatsrc = wa_it_zgeist_data-zzdatsrc.
      it_zgeist_data1-zzbewar = wa_it_zgeist_data-zzbewar.
      it_zgeist_data1-zzblart = wa_it_zgeist_data-zzblart.
      it_zgeist_data1-rassc = wa_it_zgeist_data-rassc.
      it_zgeist_data1-rtcur    = wa_it_zgeist_data-rtcur.
      PERFORM get_tslvt_kslvt_values USING w_period.
      COLLECT it_zgeist_data1.
    ENDIF.
    CLEAR : wa_it_zgeist_data, wa_it_zgeist_error_data,
            it_zgeist_data1.
ENDLOOP.
it_zgeist_data[] = it_zgeist_data1[].
ENDFORM.                    " get_zgeist_data
*&      Form write_error_report
Form used to display error data for the GL BAL fetched data
FORM write_error_report .
DATA : l_text(80) TYPE c.
CASE w_period.
    WHEN '001' OR '01'.
      l_text = text-e01.
    WHEN '002' OR '02'.
      l_text = text-e02.
    WHEN '003' OR '03'.
      l_text = text-e03.
    WHEN '004' OR '04'.
      l_text = text-e04.
    WHEN '005' OR '05'.
      l_text = text-e05.
    WHEN '006' OR '06'.
      l_text = text-e06.
    WHEN '007' OR '07'.
      l_text = text-e07.
    WHEN '008' OR '08'.
      l_text = text-e08.
    WHEN '009' OR '09'.
      l_text = text-e09.
    WHEN '010' OR '10'.
      l_text = text-e10.
    WHEN '011' OR '11'.
      l_text = text-e11.
    WHEN '012' OR '12'.
      l_text = text-e12.
    WHEN '013' OR '13'.
      l_text = text-e13.
    WHEN '014' OR '14'.
      l_text = text-e14.
    WHEN '015' OR '15'.
      l_text = text-e15.
    WHEN '016' OR '16'.
      l_text = text-e16.
ENDCASE.
SKIP 2.
WRITE:/45 text-h01 COLOR COL_HEADING.
SKIP 2.
FORMAT COLOR 4.
WRITE:/(234) sy-uline.
WRITE:/1   sy-vline,
         2   text-h02,
         9   sy-vline,
         10 text-h03,
         19 sy-vline,
         20 text-h04,
         28 sy-vline,
         29 text-h05,
         41 sy-vline,
         42 text-h06,
         49 sy-vline,
         50 text-h07,
         69 sy-vline,
         70 text-h08,
         89 sy-vline,
         90 text-h09,
         109 sy-vline,
         110 text-h10,
         119 sy-vline,
         120 text-h11,
         130 sy-vline,
         131 text-h12,
         144 sy-vline,
         145 text-h13,
         152 sy-vline,
         153 text-h14,
         234 sy-vline.
WRITE:/(234) sy-uline.
FORMAT COLOR OFF.
LOOP AT it_zgeist_error_data INTO wa_it_zgeist_error_data.
    FORMAT COLOR 2.
    WRITE:/1   sy-vline,
           4   wa_it_zgeist_error_data-rldnr,
           9   sy-vline,
           13 wa_it_zgeist_error_data-rrcty,
           19 sy-vline,
           22 wa_it_zgeist_error_data-rvers,
           28 sy-vline,
           32 wa_it_zgeist_error_data-ryear,
           41 sy-vline,
           42 wa_it_zgeist_error_data-rbukrs,
           49 sy-vline,
           50 wa_it_zgeist_error_data-robjnr,
           69 sy-vline,
           70 wa_it_zgeist_error_data-cobjnr,
           89 sy-vline,
           90 wa_it_zgeist_error_data-sobjnr,
           109 sy-vline,
           112 wa_it_zgeist_error_data-rtcur,
           119 sy-vline,
           123 wa_it_zgeist_error_data-runit,
           130 sy-vline,
           135 wa_it_zgeist_error_data-drcrk,
           144 sy-vline,
           147 wa_it_zgeist_error_data-rpmax,
           152 sy-vline,
           153 l_text,
           234 sy-vline.
    FORMAT COLOR OFF.
ENDLOOP.
WRITE:/(234) sy-uline.
ENDFORM.                    " write_error_report
*&      Form get_tslvt_kslvt_values
Form used to get TSLxx & KSLxx values for the period fetched
FORM get_tslvt_kslvt_values USING period.
FIELD-SYMBOLS : <f1> TYPE ANY,
                 <f2> TYPE ANY.
DATA : l_tslvt_val(25) VALUE 'wa_it_zgeist_data-tsl',
        l_kslvt_val(25) VALUE 'wa_it_zgeist_data-ksl',
        l_tslvt TYPE tslvt9,
        l_kslvt TYPE kslvt9,
        l_period TYPE poper.
clear l_period.
l_period = period.
DO l_period TIMES.
      CONCATENATE l_tslvt_val l_period+1(2) INTO l_tslvt_val.
      CONCATENATE   l_kslvt_val l_period+1(2) INTO l_kslvt_val.
    ASSIGN (l_tslvt_val) TO <f1>.
    l_tslvt = <f1>.
    it_zgeist_data1-tslvt = it_zgeist_data1-tslvt + l_tslvt.
    ASSIGN (l_kslvt_val) TO <f2>.
    l_kslvt = <f2>.
    it_zgeist_data1-kslvt = it_zgeist_data1-kslvt + l_kslvt.
    l_period = l_period - 1.
    clear : l_tslvt, l_kslvt, l_tslvt_val, l_kslvt_val.
    l_tslvt_val = 'wa_it_zgeist_data-tsl'.
    l_kslvt_val = 'wa_it_zgeist_data-ksl'.
    if l_period = 0.
      exit.
    endif.
ENDDO.
ENDFORM.                    "get_tslvt_kslvt_values
*&      Form process_ftp_file
Form used to connect & disconnect to Informatica Server using FTP
Also, used to transfer files to the Informatica location
--> p1        text
<-- p2        text
FORM process_ftp_file .
DATA: l_slen     TYPE i,
        l_error,
        l_pwd(30) TYPE c.
CONSTANTS: c_dest TYPE rfcdes-rfcdest VALUE 'SAPFTP',
             c_key TYPE i              VALUE 26101957.
l_error = 0.
connect to ftp server
l_pwd = p_pwd.
l_slen = STRLEN( l_pwd ).
CALL FUNCTION 'HTTP_SCRAMBLE'
    EXPORTING
      SOURCE      = l_pwd
      sourcelen   = l_slen
      key         = c_key
    IMPORTING
      destination = l_pwd.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
    EXPORTING
      text = 'Connect to FTP Server'.
To Connect to the Server using FTP
CALL FUNCTION 'FTP_CONNECT'
    EXPORTING
      user            = p_user
      password        = l_pwd
      host            = p_host
      rfc_destination = c_dest
    IMPORTING
      handle          = w_hdl
    EXCEPTIONS
      OTHERS          = 1.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
               WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CLEAR : w_outfile, w_file_count.
MOVE 'ERC/GLOBALSAP/M_ERC_GLOBALSAP_COACODE' TO w_outfile.
PERFORM download_to_ftp TABLES it_coacode USING w_outfile.
w_file_count = w_file_count + 1.
CLEAR : w_outfile.
MOVE 'ERC/GLOBALSAP/M_ERC_GLOBALSAP_ACCTCODE' TO w_outfile.
PERFORM download_to_ftp TABLES it_acctcode USING w_outfile.
w_file_count = w_file_count + 1.
CLEAR : w_outfile.
MOVE 'ERC/GLOBALSAP/M_ERC_GLOBALSAP_ENTITYCODE' TO w_outfile.
PERFORM download_to_ftp TABLES it_entitycode USING w_outfile.
w_file_count = w_file_count + 1.
CLEAR : w_outfile.
MOVE 'ERC/GLOBALSAP/M_ERC_GLOBALSAP_ATTRIBCODE' TO w_outfile.
PERFORM download_to_ftp TABLES it_attribcode USING w_outfile.
w_file_count = w_file_count + 1.
CLEAR : w_outfile.
MOVE 'ERC/GLOBALSAP/ERC_GLOBALSAP_GLBAL' TO w_outfile.
PERFORM download_to_ftp TABLES it_glbal USING w_outfile.
w_file_count = w_file_count + 1.
CLEAR : w_outfile, w_tot_recs.
PERFORM count_records.
PERFORM process_globalsap.
MOVE 'ERC/GLOBALSAP/C_ERC_GLOBALSAP' TO w_outfile.
PERFORM download_to_ftp TABLES it_globalsap USING w_outfile.
To disconnect the FTP
CALL FUNCTION 'FTP_DISCONNECT'
    EXPORTING
      handle = w_hdl.
To disconnect the RFC Connection
CALL FUNCTION 'RFC_CONNECTION_CLOSE'
    EXPORTING
      destination = c_dest
    EXCEPTIONS
      OTHERS      = 1.
ENDFORM.                    " process_ftp_file
*&      Form download_to_ftp
Form to put the files in the Informatica Location using FTP
Path is ERC\GLOBALSAP\<filename>
FORM download_to_ftp TABLES it_tab
                     USING l_string TYPE char64.
CALL FUNCTION 'FTP_R3_TO_SERVER'
    EXPORTING
      handle         = w_hdl
      fname          = l_string
      character_mode = 'X'
    TABLES
      text           = it_tab[]
    EXCEPTIONS
      tcpip_error    = 1
      command_error = 2
      data_error     = 3
      OTHERS         = 4.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
            RAISING invalid_output_file.
ENDIF.
ENDFORM.                    " download_to_ftp
*&      Form get_period_year
Form to fill the Period & Year based on the Sy-datum
FORM get_period_year .
DATA : l_month(2) TYPE c,
         l_day(2)   TYPE c,
         l_year(4) TYPE c.
l_year = sy-datum+0(4).
l_month = sy-datum+4(2).
l_day   = sy-datum+6(2).
CASE l_month.
    WHEN '01'.
      IF l_day <= '15'.
        w_period = '12'.
        w_year = l_year - 1.
      ELSE.
        w_period = '1'.
        w_year = l_year.
      ENDIF.
    WHEN '02'.
      IF l_day <= '15'.
        w_period = '1'.
        w_year = l_year.
      ELSE.
        w_period = '2'.
        w_year = l_year.
      ENDIF.
    WHEN '03'.
      IF l_day <= '15'.
        w_period = '2'.
        w_year = l_year.
      ELSE.
        w_period = '3'.
        w_year = l_year.
      ENDIF.
    WHEN '04'.
      IF l_day <= '15'.
        w_period = '3'.
        w_year = l_year.
      ELSE.
        w_period = '4'.
        w_year = l_year.
      ENDIF.
    WHEN '05'.
      IF l_day <= '15'.
        w_period = '4'.
        w_year = l_year.
      ELSE.
        w_period = '5'.
        w_year = l_year.
      ENDIF.
    WHEN '06'.
      IF l_day <= '15'.
        w_period = '5'.
        w_year = l_year.
      ELSE.
        w_period = '6'.
        w_year = l_year.
      ENDIF.
    WHEN '07'.
      IF l_day <= '15'.
        w_period = '6'.
        w_year = l_year.
      ELSE.
        w_period = '7'.
        w_year = l_year.
      ENDIF.
    WHEN '08'.
      IF l_day <= '15'.
        w_period = '7'.
        w_year = l_year.
      ELSE.
        w_period = '8'.
        w_year = l_year.
      ENDIF.
    WHEN '09'.
      IF l_day <= '15'.
        w_period = '8'.
        w_year = l_year.
      ELSE.
        w_period = '9'.
        w_year = l_year.
      ENDIF.
    WHEN '10'.
      IF l_day <= '15'.
        w_period = '9'.
        w_year = l_year.
      ELSE.
        w_period = '10'.
        w_year = l_year.
      ENDIF.
    WHEN '11'.
      IF l_day <= '15'.
        w_period = '10'.
        w_year = l_year.
      ELSE.
        w_period = '11'.
        w_year = l_year.
      ENDIF.
    WHEN '12'.
      IF l_day <= '15'.
        w_period = '11'.
        w_year = l_year.
      ELSE.
        w_period = '12'.
        w_year = l_year.
      ENDIF.
ENDCASE.
ENDFORM.                    " get_period_year

Default value in receiver file adapter

Hi Experts,
I am doing JMS to FILE scenario, receiver file structure got 100 fields, i need to create the file with all 100 fields, if anything doesn't exist in source side i need to put empty value in the receiver file, i know i can achieve this using MapWithDefault node function, but i got more than 100 fields.
is there any simple way to cheive this ????

Hi Hareen,
If the source field does not exist even the reciever side field occurance 0..1, the field is not coming in recever structure after the mapping, so in the file it is not creating empty value, for example if the source side 20 fields exist after the mapping target side only 20 fields appearing in target xml because we have 0..1 occurance.

Plsss help me: how to set default values in html:file and html:radio

Hai,
To set default value to text box i use the following code. It works well.
<html:text property="modifyserverdesc" value="<%= serverDesc%>" styleClass="text" size="38"/>But for file i use the code
<html:file styleClass="file" property="modifyserverimgfile" value="<%= serverImage%>" size="40"/>It doesn't display value. What is problem here?
how to set default selection in <html:radio>.

No it won't help.
You can't set a value into an <input type="file"> control at all. The user has to put values in themselves.
The reason behind this is security. If the programmer could put any value they liked in there, you could upload any file at all from a users computer without their intervention. eg C:\windows\system32\passwords.txt
Bottom line: you can't put a default value into the input type="file" control.
And a good thing too ;-)

Re-read in values in measurement file when file is updated

Hi,
I'm trying to control a power supply with labview and set the voltage. I've currently got it working reading in a measurement file and setting it to the value within the file. I'm now having the issue that I would like to update this value when the file is changed, as in read the file again when it is updated and set the new voltage. I've tried several things but if I put the file within the while loop then it reads it once and then returns 0 following the first loop. Outside the while loop it only reads the initial value.
I'm quite new to labview so any help would be much appreciated.
Thanks,
E
Solved!
Go to Solution.

You might want to explain your application a little better. Looking for a file to change to set an instrument does not seem like a good idea. Who is changing the file? How often is the file changed?
A better way might be to use a queue or notifier for setting the instrument.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

In this case, how would you save values to a file?

Hi,
I need your advice. I have a Vi with lots of controls and the user can change many settings.
If I stop and start the vi again, you'll surely know, all settings are back to default, due to the fact that LabVIEW unfortunately does not allow to make values default programmatically.
Nevertheless there are many possibilities to save and load the settings. But which one is the best in my case?
I have boolean buttons, over 60 numeric controls, two file pathes and one numeric array.
I could write all of them separated by tabs in a text file (see screenshot), and read them back - but this is very laborious and prone to mix-up.
I tried clustering, but it's not possible due to the array, which I cannot put into a cluster.
What would be the best and simplest way to accomplish this saving and reading of the settings? What would you recommend?
Greetings
Johannes
LabVIEW 7.1.
Windows XP Professional 2002 SP 2
Intel Core 2 Duo, 2,4 GHz
Message Edited by candidate on 12-01-2008 10:00 AM

You could write a VI that set values from a file using VI server. With VI server you get references to all controls and create a list of label.text. When you read the value for "Smierung" you search the index of the reference to that control in the label array and set the value using "Value" property.
Play around with VI server and control references.
Regards,
André
Using whatever version of LV the customer requires. (LV5.1-LV2012) (www.carya.nl)

How do I put text into an Edge File that clients can edit easily afterwards

Hi
Can anyone explain how I can put text into an edge file (styled with google fonts) and make it so that clients can access the text and update the text as they require?
Previous suggestion was dynamically loading a .txt file - any instructions would be most appreciated.
Thanks.

Hi Resdesign!
Your code is very useful to learn how to use Json in Adobe Edge Animate!
But I have a question: why you use ( i ) as argument of the function UpdateInfo and when you recall it you use ( index )?
$.getJSON('slides.json', function(data){
          //for(var i=0; i<data.length; i++){
function updateInfo(i){
                    sym.$("photo").css({"background-image": "url('"+data[i].image+"')"});
                    sym.$("pillar").html(data[i].pillar);
                    sym.$("what").html(data[i].what);
                    // position
          index = -1;
          sym.$("btn").click(function(){
          index++;
                    if (index>=5){
                              index = 0;
          updateInfo(index);
Many thanks for your attention!
Davide

I am facing problem while reading values from properties file ...i am getting null pointer exception earlier i was using jdeveloper10g now i am using 11g

i am facing problem while reading values from properties file ...i am getting null pointer exception earlier i was using jdeveloper10g now i am using 11g

hi TimoHahn,
i am getting following exception in JDeveloper(11g release 2) Studio Edition Version 11.1.2.4.0 but it works perfectly fine in JDeveloper 10.1.2.1.0
Root cause of ServletException.
java.lang.NullPointerException
at java.util.PropertyResourceBundle.handleGetObject(PropertyResourceBundle.java:136)
at java.util.ResourceBundle.getObject(ResourceBundle.java:368)
at java.util.ResourceBundle.getString(ResourceBundle.java:334)
at org.rbi.cefa.master.actionclass.UserAction.execute(UserAction.java:163)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1196)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:432)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)

I got my ipad 2 yesterday. I am trying to transfer photos as albums to ipad via itunes. I put the photos in a file with sub-files as I was told. The all tranfer but into one album. Is there a way to do what I am trying?

I am trying to tranfer photos from pc to ipad via itunes. I put the photos in a file and sub-files in order to tranfer them as albums: an main album with albums within. All the photos tranfered but into only one album. Is there a way to do this? Is there an app that would help. Also, I tranfered two albums into iphoto. I edited a photo in one album which created a new album of edits. I have removed the photos form the album but I am not able to delete the album themselves. Any help will be greatly appreciated.

I am having the same problem and it is even bigger.
When opening a 1-page PDF in iBooks and sending it via mail it is sent inline as preview, but the recipient cannot open the file anymore. Also on iPad and iPhone there is no "open in" possible.
Somehow the mail app does destroy the file. What is going wrong?

How to cell register the date/time when you put a value in another cell

Hello guys!
How do I get a cell (eg A2) tell the date and time when I put a value in another cell (eg A1) in Numbers?
For example, I want to register a cell to read my electricity meter.
I write in cell A1: 45809. When placing this value in A1, I want to appear (on A2) the date and time when I did that record automatically. Is it possible?
I hope you understood the question!
Thank you in advance to those who try to help.

There is not automatic time stamping of on entry of a time. One suggestion I've seen has a cell that has the current date and time. Everytime you cahnge any cell that cell will update. You can then copy that cell and paste the value into your date/time cell adjacent to the meter reading:
Create a new, plain table:
Now in cell A1 enter the formula "=now()" short hand for this is:
A1=now()
now resize the table so it is a table that is 1 cell by 1 cell by selecting any cell, then dragging the table size control in the bottom right corrner towards cell A1:
It should look like this when you have completed this task:
Now create another new, plain table and enter "Date" for cell A1, and "Meter Reading" for B1:
Now you can enter a meter reading (I entered "45671"). Now select the CELL that has current date and time from the first table at the very top, and copy:
Now select the cell in the date column where you want to put the current date and paste values by using the menu item "Edit > Paste Value":

How to retrieve value from xml file

hi all,
can somebody pls tell me how to retrieve value from xml file using SAXParser.
I want to retrieve value of only one tag and have to perform some validation with that value.
it's urgent .
pls help me out
thnx in adv.
ritu

hi shanu,
the pbm is solved, now i m able to access XXX no. in action class & i m able to validate it. The only thing which i want to know is it ok to declare static ArrayList as i have done in this code. i mean will it affect the performance or functionality of the system.
pls have a look at the following code snippet.
public class XMLValidator {
static ArrayList strXXX = new ArrayList();
public void validate(){
factory.setValidating(true);
parser = factory.newSAXParser();
//all factory code is here only
parser.parse(xmlURI, new XMLErrorHandler());
public void setXXX(String pstrXXX){
strUpn.add(pstrXXX);
public ArrayList getXXX(){
return strXXX;
class XMLErrorHandler extends DefaultHandler {
String tagName = "";
String tagValue = "";
String applicationRefNo = "";
String XXXValue ="";
String XXXNo = "";
XMLValidator objXmlValidator = new XMLValidator();
public void startElement(String uri, String name, String qName, Attributes atts) {
tagName = qName;
public void characters(char ch[], int start, int length) {
if ("Reference".equals(tagName)) {
tagValue = new String(ch, start, length).trim();
if (tagValue.length() > 0) {
RefNo = new String(ch, start, length);
if ("XXX".equals(tagName)) {
XXXValue = new String(ch, start, length).trim();
if (XXXValue.length() > 0) {
XXXNo = new String(ch, start, length);
public void endElement(String uri, String localName, String qName) throws SAXException {
if(qName.equalsIgnoreCase("XXX")) {
objXmlValidator.setXXX(XXXNo);
thnx & Regards,
ritu

How to read and update the value of property file

Hi,
I am not able read the values from property file.
Please tell me how to read and update the values from property file using Properties class
This is my property file : - Config.properties its located in D:\newfolder
Values
SMTP = localhost
Now i need to change the value of the SMTP
New value :
SMTP =10.60.1.9
Pls Help me
Thanks
Merlin Rosina,

Post a small (<1 page) example program that forum members can copy and run that demonstrates your problem.

Put "BigInt" value to a file in a unicode system

Similar Messages

Maybe you are looking for