Put cache mailbox back up to server

I had a user delete almost all his mail. Is there a way to push emails
from a cache into the servers online mode?
Thanks, Mr. Beer

On 20.05.2011 20:16, Mr. Beer wrote:
> I had a user delete almost all his mail. Is there a way to push emails
> from a cache into the servers online mode?
Yes. Archive them while in caching mode and then unarchive them.
CU,
Massimo Rosen
Novell Product Support Forum Sysop
No emails please!
http://www.cfc-it.de

Similar Messages

How to put messages back on the server

by accident, I set up an account that deleted received messages from teh server. I believe that I set this up as a pop account. Is it possible to put messages back on the server? I couldn't see an option for this and it is important that I be able to check these messages via webmail.
any help would be greatly appreciated.
thanks
m

Before doing anything, I encourage you to make a backup copy of the entire ~/Library/Mail folder, in case something goes wrong (quit Mail first). You can do this in the Finder by dragging the folder to the Desktop while holding the Option (Alt) key down, for example. This is where all your mail is stored.
You cannot have two accounts of the same type in Mail with the same username and incoming mail server. You can, however, set up two mail accounts with the same username and incoming mail server IF the account type is different.
That is, if you really did set up this account as POP, you can set it up also as IMAP in Mail without deleting the POP account first. You should, however, disable Preferences > Accounts > Advanced > Include when automatically checking for new mail (but keep Enable this account checked) for the POP account, to avoid it interfering with the IMAP account. You can then move any messages to the mailboxes of the IMAP account where you want them to be.
EDITED: The above assumes that the provider of this account allows you to access it as either POP or IMAP, and that you chose POP by mistake. If POP is your only option and the mistake is just that the account was configured to remove messages from the server when in fact you didn't want to do that, then that's a different problem...
Note: For those not familiarized with the ~/ notation, it refers to the user's home folder, i.e. ~/Library is the Library folder within the user's home folder.

Am using iphone 3gs and updated it to ios 6.1.3, after this when i restar the phone and put the sim back it said that your phone cant be avtivated because the server is temporarily unavailable, my sim is also undetected. what should i do now please help.

am using iphone 3gs and updated it to ios 6.1.3, after this when i restar the phone and put the sim back it said that your phone cant be avtivated because the server is temporarily unavailable, my sim is also undetected. what should i do now please help.

If your iPhone was hacked/jailbroken to use a different carrier then the update locks it back again to the original carrier.

GroupWise recovery from cached mailbox?

GroupWise recovery challenge
- GroupWise 8.02 (NetWare 6.5sp8)
- Separate NSS Mail Pool with one Volume for Groupwise (single POA/MTA)
- Mailarchives are on seperate DATA volume
- Backup : dont ask
Situation: As a result of a hardware failure NSS MAIL pool and volume was lost
We had to edit the NSS startup to avoid it trying to load, after that the server runs again, without GW.
It was decided to move from GW8 NetWare to GW2012 on OES 11 in the proces (new tree)
Created a brand new GW2012 sp2 systeem
Modified all the FID's from the users in this system to the values of the old system
copied the old gwarchives to the new server
We were able to open these archives from the users mailbox (to discover that it was a year old, as it was archived per year.)
Now: Under a certain USER thre were about more than 100 shared subfolders with specific customer info. It seems to be lost.
This user now presents empty non shared folders from its archive.
Now the question. On one laptop all this shared folders are still present with al its contents in a locally cached mailbox. Not as the folder owner but a a user. So everything is still there.
Is the a way to get this info back into the new GW system ?

Hi.
On 10.07.2013 21:26, eloderichs wrote:
> *Now the question.* On one laptop all this shared folders are still
> present with al its contents in a locally cached mailbox. Not as the
> folder owner but a a user. So everything is still there.
>
>
> Is the a way to get this info back into the new GW system ?
Yeah, sort of. If you're careful.
While in the caching mailbox, move all the items that were shared with
the user into other, personal folders of the user. Now archive all that,
connect to the live system, and unarchive again. Then share the stuff again.
IIRC that should work. Make a backup of the whole caching mailbox with
the data before you start.
CU,
Massimo Rosen
Novell Knowledge Partner
No emails please!
http://www.cfc-it.de

I used a third party programme called Mackeeper UGHHH,it moved loads of files to the trash now i do not know where they originally came from or belong!! the put back option is in grey??how can i manually put these files back where they belong?SO upset!!

I used a third party programme called Mackeeper UGHHH SOOO Stupid i know,it moved loads of files to the trash now i do not know where they originally came from or belong!! the put back option is in grey??and will not work even when i highlight one by one!!
how can i manually put these files back where they belong?
i know i should have used time machine but i have not set it up and its too late for that now
i have been researching and racking my brain on how to put these folders and contents of them back to where they once were all of the contents of the folder are still in tact AND i have not emptied my trash,my programmes and some of my apps are not working properly now...i use my computer alot for making music and things are jumbled up now...
is there anyone out there who knows the answer to my prayers on how to go about putting these folders/files back to where they came from to restore functionality to my mac..Yes and thank u if u were going to tell me i HAVE un installed mackeeper...A very sad and upset Mac user!! Cheers Shane

hello there thank u so much for ur reply!! ok i uninstalled mackeeper now and the put back option is still in grey im so confused...i tried restarting my computer like u said and put back still in grey??!! the files that are in my trash are everything from Accounts,address book plug-ins,address book,adobe,aim.........then stuff like apple,Audio,....to caches color pickers,colors,com.apple.TCC,to DVD player to facebook,google to ilifemedia browser to itunes to keychains to movie effects,preferences printers to skype...my Native instruments files BUT not all of them my garage band but not all of it...it seriously looks like my whole library is in the trash i tried to put things back where i THINK they belong and it just added the item or folder under where i thought it went and didnt restore functionality to for instance google chrome and all my book marks are there....they seem to be only certain things from my library that would have added some functionality to apps and programmes like my garageband is missing stuff photobooth wont work so on.......kinda looks a bit like this thats only the half of it!! Cheers shane!!!

After downloading OSX Mavericks, my AOL mailbox has disappeared and all the AOL messages get dumped into the inbox along with the gmail messages. How can I get the AOL mailbox back?

After downloading OSX Mavericks, my AOL mailbox has disappeared and all AOL messages have been lumped in the inbox along with my gmail messages. What do I have to do to get my AOL mailbox back?

Linking AOL and gmail? I don't know what that means. But if it means what I think it does - that you have the AOL and gmail servers chatting directly with each other through some configuration, I'd definitely disable that.
In general, the messages either aren't deleted, or aren't correctly deleted, or there's a protocol or network error, or some sort of a mail server error.
First diagnostic is a mailbox repair. Mail.app > Mailbox > Rebuild
Then verify that the credentials are correct and the connection is reliable:
Mail.app > Window > Connection Doctor
And yes, if you have gmail and AOL chatting directly with each other, undo that.

When i put firefox in offline mode, and then click on pages saved in history , it can't load any pages or any images. i put cach size to 250mb but the problem is the same, it saves history for two months, but can't load pages.

when i put firefox in offline mode, and then click on pages saved in history , it can't load any pages or any images. i put cach size to 250mb but the problem is the same, it saves history for two months, but can't load pages.

Hi there,
When I inspect your site in browser tools, I'm getting 404 errors from your page:
[Error] Failed to load resource: the server responded with a status of 404 (Not Found) (jquery-2.0.3.min.map, line 0)
[Error] Failed to load resource: the server responded with a status of 404 (Not Found) (edge.4.0.0.min.map, line 0)
BarnardosIreland wrote:
I would have thought that publishing should give a complete package that doesn't need any further edits to the code and can just be directly ftp'ed to the web - is this correct?
In general, you are correct - but also your server does need to be properly configured (and those errors above lead me to think it may not be) to serve the file types that your uploading - but it could be something else entirely. Can you zip up your composition folder, upload it to your Creative Cloud files, set it to share, and then post a link here so I can download it? If you'd rather not share it publicly, can you PM me with a link to your composition files?
Thanks,
Joe

Broken mailbox - 10.4.6 server

Hi
One of my users had a broken mailbox, so I tried to Reconstruct it in Server Admin. This appeared to do nothing at all! I also tried running reconstruct from the command-line in Terminal (/usr/bin/cyrus/bin/reconstruct daxxxx) but this didn't appear to do anything either!
As the user hadn't too many new messages in the mailbox, he was quite happy for me to delete and recreate the user account. The bad news is that although the user account in Workgroup Manager was deleted, the mailbox account was not. So when I added a new user with the same name (so as not to have to change the email address), this simply picked up the old broken mailbox! (This one wouldn't reconstruct either).
The end result is that I have had to set up a totally different user account and forward the email from the original account to this one. Whilst this works, it's not the solution I wanted.
What could I have done to either reconstruct the original mailbox properly or completely deleted and re-instated the user account?
Thanks for your help on this one.
Richard.
PS the instructions for recreating the mailboxes on 10.3 server is said in the documentation not to work on 10.4 server, so I didn't try them, although I have used them in the past on 10.3 server.

Thanks for the advice. It's taken me a while to get back to this one.
The single sheet PDF by Ben Masters proved to be the most useful advice, although I had to make some changes in order to delete the broken mailbox.
First, I had to Stop and Start Mail in order to get the admin change in /etc/imapd.conf to take effect.
Second, where the original document gave user/testuser in the cyradm commands, I had to substitute 'Other Users'/testuser. This is because the lm command results showed as
Other Users/testuser
Other Users/testuser1
and so on.
Third, the sam and dm commands wouldn't work because the permissions on the items in the broken mailbox were set as 600. Once I did a chmod to 777 the sam and dm commands worked properly and I was finally rid of the broken mailbox.
I hope that other visitors here may find these comments helpful.
Mac OS X (10.4.6)
Mac OS X (10.4.6)

Backing up Exchange Server 2013 CU3 with Windows Server Backup Program

Looking at configuring Windows Server Backup Program to backup Exchange Server 2013 CU3 which is a member a DAG Group using a specific Backup Domain Account.
From my understanding from the following technet Article" Using Windows Server Backup to Backup and Restore Exchange Data" at http://technet.microsoft.com/en-us/library/dd876851(v=exchg.150).aspx I cannot use wbadmin.exe has it uses an older
unsupported version of Powershell.
My question is what are the minimum AD rights required for an AD account needed to be able to backup/restore Exchange Datastore using Windows Server Backup Program in Windows Server 2012?
Thanks,
NIck

Hi Sathish,
After looking at your response, it all make sense except when I look at what exchange right assigned via RBAC. I understand that the backup service account will require access to the exchange databases
to be able to backing and restoring them. After looking at the different roles
I'm wondering if I require to assign both the Databases roles for Backing up the databases and the Disaster Recovery Role as well to be able to restore the databases has well as having a mailbox on the exchange
server for the backup service account?
Below is explanation of the roles via the ECP
Database Role
This role enables administrators to create, manage, mount and dismount mailbox and public folder databases on individual servers.
Disaster Recovery
This role enables administrators to restore mailboxes and database availability groups in an organization.
Thanks,
Nick

Always re-caching email/re-synchronizing w/ server when launching Mail

I had to change my email address on my personal domain I have. for privacy concerns i will just label it 'example.com'.
Iam using IMAP for my domains on a shared hosting account.
My long-term email account is [email protected], however I've had to change it to [email protected] ... so what I did in the cPanel of my websites backend is create a new email account '[email protected]' with the same password as [email protected]
kept [email protected] in the Mail application, added the [email protected] account into Mail and properly copied mail form [email protected] to [email protected] by selecting all inbox messages in [email protected] right-clicking and selecting copy-to -> [email protected]
it reflected this on the server aswell when i check the [email protected] account via webmail (SquirrelMail).
I did the same for Drafts and Sent.
However since I kept both in there to make sure I dont miss a message while I migrate to the new email account [email protected] and [email protected] are always re-caching/re-synchronizing with the server if i ever open Mail after a reboot or closing mail completely.
When it does that I lose all my Rules (and have to re-apply them, which is easy) but it is very frustating as it takes a long while before I can check for new messages and doesnt make sense why it is recaching the mail when it has been fine.
maybe should I have just selected all the mail messages and dragged them to the mailbox instead of doing a copy-to?
Thanks!

I wanted to add more information, hopefully maybe clearing anything issues.
OSX 10.6.6, Mail.app, my own domain using IMAP.
for example my original email address was '[email protected]' and needed to change my email to '[email protected]'
I created the new email account ([email protected]) on my shared hosting account cPanel using the same password as the original email ([email protected]).
Launched mail, the original email ([email protected]) I still kept in Mail, and added the new account ([email protected]) then proceeded to select all the messages from [email protected]'s Inbox to [email protected]'s Inbox...and right-clicked and selected "Copy-To [email protected]'s Inbox" (and the same for the Drafts and Sent folders)... so they were identical and had all my email copied properly over.
Everything looked fine, on the server end using WebMail (SquirrelMail) it showed everything like for like. I can send messages fine, etc.
However whenever I quite Mail and reopened it (didnt matter if I shut down the Mac or restarted or just simply relaunched mail) it always recaches the Inboxes for BOTH accounts every single time since I've added the new account as seen below:
Anyway to resolve this?

How do you move POP3 email from the iPhone back to the server or computer?

Is there any way to get email that was downloaded to the iPhone using POP3 back on the server or computer? (other than resending all the mail)

You're welcome.
Although it is possible to access a POP account with more than one email client, a POP account is really designed to be accessed with a single email client only.
I access a MobileMe account and a business POP account with the iPhone's mail client. Since an IMAP account is designed to be accessed with more than one email client keeping all server stored mailboxes synchronized with the server automatically with each email client used to access the account, accessing an IMAP account with the iPhone's mail client is much more preferable to me. All sent messages are available with each email email client used to access the account. Read a received message with the iPhone's mail client and the message will be marked as read automatically when checking the account with the email client on my computer and vice-versa. I create additional server stored mailboxes to store received and sent messages by category and I can transfer messages from the account's Inbox or Sent mailbox to the designated server stored mailbox with the iPhone's mail client, with all server stored mailboxes kept synchronized with the server automatically with each email client used to access the account.
If messages were removed from the server with the email client used on your computer to access the account - transferred to a mailbox stored locally on your hard drive, you can transfer the messages back to the designated server stored mailbox.
Need to delete and recreate the account with your iPhone's mail client, or need to restore your iPhone with iTunes, all messages that don't remain on the server will be lost with a POP account including all messages sent with the account from the iPhone - which can be stored locally on the iPhone only unless you always Bcc yourself with every sent message.
Delete and recreate an IMAP account with the iPhone's mail client and all server stored mailboxes and the messages within will be available again automatically.
IMAP account access is the way to go with the iPhone IMO.

How do i restore deleted email messages from mac mail back to hotmail server?

i have a hotmail email address i use, i have been using mac lion mail
here the problem - i found loads of my emails missing when using hotmail webpage
but in MacMail they are all there still.
i found that in macmail settings "remove copy from server after retrieving a message" was selected(after one week). (now i have disabled this function)
how can i send them back to the hotmail server email box?
Many thanks in advance for help. Rick

rickonhismac wrote:
the emails are in inbox of mac mail back to 2009 but when i log in the hotmail.com website they only go back to jan 2012
i think mac mail has erased the from hotmail server after placing them in the mac mail.
i need emails back on hotmail server for access to old emails when working out and about with ipad.
I do not know if you can unfortunately, having deleted them from the POP server and as Hotmail does not offer an iMap or Exchange solution for OSX they may be 'marooned'
I will search around and see if I can find a solution.
But before anything else happens backup your mail (Mailbox Menu>Export Mailbox) and save the file somewhere you can find it, you probably don't need to hear this but you should be (have been) backing up regularly, for this and many other reasons.
I'll post back if I can find a solution to the issue.

Powershell-Putting user mailbox to E-Discovery and in-place hold

Our org using office 365 and exchange on premise server, i asked to automate account termination. Per process each account is already enabled for litigation hold. During exit we have to put this mailbox to e-discovery and in place-hold. I tried PowerShell
command and failed to execute, Can you please provide PowerShell script to execute user "test.india".
When helpdesk supplies user name, PowerShell command starts and put this user in e-discovery with 2555 days retentions period. Please help as am new to PowerShell.
Thanks
TechRoute

"failed to execute" is a little vague. Was there an error message?
One common mistake which I made when setting this up for myself is that you have to specify a target mailbox.
New-MailboxSearch <employeeName> -SourceMailboxes <employeemailbox> -TargetMailbox "Discovery Search Mailbox"
Start-MailboxSearch <employeeName>
Works for me.

I have a dilema i use a programme called Mackeeper i accidentally moved several files to my trash,i would like to put the files back where they belong but put back option is in grey and wont work??

I have a dilema i use a programme called Mackeeper i accidentally moved several checked files to my trash BUT i didnt delete them,i would like to put the files back where they belong but the put back option is in grey and wont work?? i have spoken to Apple and to no avail !!!
Mackeeper moved my files to my trash so i pulled them out of my trash to my desktop it has copied them to my desktop as well as kept them in my trash!!
im so confused and things are not working properly anymore such as my google chrome for example...all my book marks are gone BUT i can go to the google file which is out of place on my desktop and view all my bookmarks data...ALL of my files still exist but they are just out of place now which is making it hard for certain options on my computer to work...
the files includeAccounts,address book plug-ins,addressbook,Adobe,AIM,Alfred,Anquet Maps,Apple,Asramsoftware,Audio,Automatically add to itunes,facebook,facebook 15-53-13-329,faxfresh,five details,flipping book photo album, font collections, fonts, forismatic,Garageband,Gimp,Google,Google 15-53-13-344,icloud,icons,idocument lite,ilife media browser,ilifepage layout,internet plug-ins,ip scanner,itext express,itunes,iweb,Keyboard layouts,Keychains,launch agents,Librarian,limit point software,logs,mail,mail 15-53-13-895,messages,metadata,mobile documents,mobiscope,moso,movie effects,mozilla,MPlayerx,mywebcamBroadcaster,Native instruments,Skype and LOADS more......
HOW do i get this stuff back to where it is supposed to go so that these programmes work properly again???? i also used delete and command but that did not work either,like i said i have not emptied my trash and ALL the info is there its just totally out of place and the put back option will not work sor some reason!!??? im running 10.8.5 imac someone PLEASE help me!!
i have not set up time machine either but i do back up to a site called backupblaze...

Step 1
Remove "MacKeeper" as follows.
"MacKeeper" has only one useful feature: it deletes itself.
Note: These instructions apply to the version of the product that I downloaded and tested in early 2012. I can't be sure that they apply to other versions.
IMPORTANT: "MacKeeper" has what the developer calls an “encryption” feature. In my tests, I didn't try to verify what this feature really does. If you used it to “encrypt” any of your files, “decrypt” them before you uninstall, or (preferably) restore the files from backups made before they were “encrypted.” As the developer is not trustworthy, you should assume that the "decrypted" files are corrupt unless proven otherwise.
In the Finder, select
Go ▹ Applications
from the menu bar, or press the key combination shift-command-A. The "MacKeeper" application is in the folder that opens. Quit it if it's running, then drag it to the Trash. You'll be prompted for your login password. Click the Uninstall MacKeeper button in the dialog that appears. All the functional components of the software will be deleted. Reboot.
Failure to remove MacKeeper will result from neglecting any one of these points:
Quit MacKeeper before dragging it to the Trash.
Don't empty the Trash after dragging the application to it. Let MacKeeper delete itself.
Don't try to drag the MacKeeper icon in the Dock to the Trash.
Here are some general suggestions. If you want your computer to be usable, don't install crapware, such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” "boosters," “extenders,” “cleaners,” "doctors," "tune-ups," “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, this stuff is useless, or worse than useless.
The more actively promoted the product, the more likely it is to be garbage. The most extreme example is the “MacKeeper” scam.
The only software you should install is that which directly enables you to do the things you use a computer for — such as creating, communicating, and playing — and does not modify the way other software works. Never install any third-party software unless you know how to uninstall it.
Step 2
Restore from the last backup that predates the unwanted changes.

I removed my battery in an attempt to insert a SIM card, obviously without knowing how to insert the SIM card. I put the battery back into place and it was already charged 100%, but it's stuck in recovery mode. I've already restored it, but it won't boot.

I was trying to insert a SIM card into my iPhone 4 without actually knowing how to do so. I assumed that I was to remove the back of the phone and find a slot for it near the battery. I removed the battery in an attempt to find a SIM slot, and was obviously unsuccessful. I put the battery back into place and screwed the phone back plate back on. Note: the battery was fully charged and the iPhone was working perfectly fine before. After screwing the iPhone back into place properly, I thought, I attempted to cut the phone on and it would not do so. I put it back on the charger, and the screen came up that says "Connect to iTunes". I obviously couldn't do so if its plugged into the wall. I plugged into the computer, connected it to iTunes, went through the Recovery mode process, and it still won't turn on. The computer says that the iPhone is in Recovery mode, but iTunes can't do anything because it has already been restored. When I disconnect it from the computer, I hold all buttons in all possible combinations, but it won't turn on at all. When I plug it into the wall, it again says to connect to iTunes. I don't know if I damaged the battery or any part within the iPhone, but I was sensitive in my approach to removing the battery and putting it back in, and there is no visible damage whatsoever. I am extremely frustrated and in desperate need of Apple-Pro help.

do you have a cdma iphone 4? becauase cdma iphones dont have a sim card slot... the providers that use cdma technology here in the us would be verizion, sprint, criket, ect... if you want to use your iphone 4 on att or tmobile (gsm carriers). then you would need a gsm iphone 4 (has sim card slot). a gsm iphone 4 is different than a cdma iphone 4 (they have different radio chips). maby you missed the sim card slot? sim card slot would be on the side of the phone.. never inside (unless it has a removable back cover like the galaxy s3 or s4), if you dont see a sim card slot on the side of the phone than you have a cmda iphone 4. can you tell me what carrier you are trying to use?

Put cache mailbox back up to server

Similar Messages

Maybe you are looking for