"Put file" Option in Receiver File Adapter

Hi All,
Even though this seems to be a basic Question, i didn't found any answer to this in SDN.
Please share your thoughts on this.
We have one option called Put file in the receiver file adapter, When i read the use of this option i found some thing on SAP help.
But i am not clear about that option, if any one can clear that, it would be great.
Regards

Hi,
Put file is put the file directle in the receiver file path.
there are 2 options for put file
1. Directly    2. Use Temporary File.
Directly:   Directly will directly place the file in specified folder. In some cases ur file is large then this option wont work.
Use Temporary File:    In some cases u want to wait more time to create output file then the sepecified poll interval.In that cases in file is read some data and saved in a temporary file, after reading or completion of whole file then only only it will place the file in speficied server path.
Thanks,
Enivass

Similar Messages

Error dynamic File Name in Receiver File Adapter

Hi all,
Dynamic file name for Receiver file Adapter Problem
my multi mapping look like this in design mode
messages
     message1
          SD01_E
               FileName
               row
     message2
          SD02_E
               FileName
               row
by processing the xml look like this:
<ns2:SD01_E xmlns:ns2="urn:lsv.de/SAP/XXX">
<FileName>L40SA939.xiConstant</FileName>
- <row>
or
<ns2:SD02_E xmlns:ns2="urn:lsv.de/SAP/XXX">
<FileName>L40SA939.xiConstant</FileName>
- <row>
in file receivere adapter i have try this but it dos not work
payload:SD01_E,1,FileName,1
Error:com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 0(:main:, row:1, col:0)
is there any way to have access to Filename in different root elements??
regards
Ralf

Hi Ralf,
i think, you need for each XML msg (each different root element) a new adapter -> a new IF determination, new rec agreement and a new channel.
Regards,
Udo

Output file formats in receiver file adapter

Hi,
Is it possible to create a tab delimited or a .CSV file in a receiver file adapter ??
-Teresa

HI,
It is possible to create a tab delimited/.csv file in a receiver file adapter by choosing "File content conversion" as a Message Protocol. But you need to do content conversion based on structure.
-Regards,
Moorthy

Payload as File name at Receiver File Adapter

Hi All,
I have a requirement for a PROXY to File Scenario where Receiver files has to be named dynamically with a value from the Payload that I get. Also the particular field that has the file name should be unmapped with the Receiver.
For Example,
   <row>
      <Name>Alex</Name>
      <DOB>27062014</DOB>
      <City>Delhi</City>
   </row>
If this is the Payload I get, I want the Receiver file name to be "27062014.txt". At the same time this particular field should not be mapped at the Receiver end.
I have tried a few links which confuse me further.Kindly help me,
Thanks in advance,
Sree Ram

Hi Sree,
Please check if the case is correct. refer the below discussion
Problem in variable substitution
reference blog for variable substitution
Variable Substitution for Directory or File name.
regards,
Harish

Dynamic File name in Receiver File adapter

Hi,
My Scenario is Proxy to File.
I must create filename dynamically in the receiver file adapter by taking the sales order number and divison from the source.
How can i create a dynamic filename? i searched the forum, but i could not get the correct answer,
Please help me out.
Regards
Srinivas

Hi Srinivas,
> My Scenario is Proxy to File.
> I must create filename dynamically in the receiver file adapter by taking the sales order number and divison from the source.
public String targetFileName(String Sono, String Div, Container container) throws StreamTransformationException
DynamicConfiguration conf = (DynamicConfiguration)container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String MyFileName = sono + div + "<filename>"+".xml";
conf.put(key, MyFileName);
return MyFileName;
File name you can format according to your requirement.
And one more thing for this you have to specify the ASMA properties. For this check the below link step-1 and step-2.
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Regards
Ramesh

Dynamic File Name for Receiver File Adapter

Hi All,
How can we use dynamic name for Receiver file adapter?
Can anyone help.
Thanks in Advance
Chemmanz

Hi Chemmanz,
The dynamic filename generation concept is as follows.
In your filename field. just give a variable with % symbols. (eg: %file% ).
Now, under the option Variable Name Substitution, you can give how the value has to be created.
It can be your interface name, sender service name, etc or it can be some value dynamically from your payload.
For the former, your give
message:interface_name ,etc
and for the payload part you give,
Payload: "your element root which u wanna acecss"
Just check this link out,
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
And read the contents under variable substitution and it will help you understand the concepts better.
If you have any clarifications, do get back,
Regards,
Bhavesh

How to give a dynamic File Name for Receiver File/FTP Adapter.

Hi Experts,
    I have one scenario in which we are creating a flat file of IDOC which is coming from R/3 & sending it to FTP location. For this we have configured Receiver FTP adapter with File Name Scheme as "NT.out" & in File Consturction mode i have given as "Add Time Stamp".
    therfore while creating a file it is creating as NTyyyyMMdd-HHmmss-SSS.out
where as my requirement is only to to add Time & not the Date. (NThhmmss.out)
    How to do this ?
    for your info we are using ABAP Mapping.
    Pl help me
Regards,
Umesh

Hi Umesh,
      Add one more field to your target structure for your file name and populate that field as per your requirement like NTyyyyMMdd.out. In receiver communication channel use Variable subtiution option and give the refrence of Payload and file construction mode set as create.
And refer the below weblogs for Variable Subtiutuion File Name Scheme
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
Hope this way would be solve u r problem.
Cheers
Veera
>>>Reward points, if it is needful

Creating .RTF output files - PI7.0 Receiver file adapter

Hi Experts,
I am currently facing an issue with the Receiver File adapter where in the output files are required to be of the format of .RTF (Rich Text Format).
The scenarios is an outbound proxy from SAP ABAP - > PI 7.0 -> .RTF File
All the data required to be present in the file will be coming in the source structure
Can the File Receiver Adapter handle this ?
Is there a way to generate Files with extension .rtf ??
It is a requriement since the output files will be used as Reports , and so the desired format.
I am unsure if I will have to use XSLT mapping , in this because i am new to that , Kindly let me know how to go about it ,. any links or pointers on how to achieve the same will be welcome.
thanks
Dev
Edited by: sd on Feb 17, 2010 8:23 AM

Thanks for your reponse Praveen
Can you please let me know how can i put the extension as .rtf for the output files i am generating ??
as far as the formatting is concerned ... it is like ... the header needs to be of a particular Font , a particular font size , bold etc and so is the case for line items
I am unsure if it is possible using an Adapter module as well
thanks
Dev

Output CSV File Naming Convention - Receiver File Adapter

Dear SAP experts,
I need help regarding my scenario.
My scenario is this, Customer will send EDI message to XI. XI will then translate the message and convert it into XML.. After, a Receiver File Adapter will receive the XML then convert it into .csv file.
I've already configured the Receiver File Adapter to convert the XML into .csv file.
But, my problem now is how will I configure to have my output .csv file has a File Naming Convention.
The output .csv file must be "CustomerName_YearMonthDate".
From the EDI message, there is indicated Sender GLN in which, each customer has its own Sender GLN.
E.g., Globus --> 200, Karstadt --> 300, Metro --> 400.
How will I configure so that I can have an output .csv file of,
If Globus sends the EDI message, the output .csv file is Globus_20080304.csv.
If Karstadt, Karstadt_20080304.csv.
If Metro, Metro_20080304.csv.
Kindly advise for a clear and complete solution.
Thank you very much for your usual support.
Fred

Hi Nisar,
My target message (XML) in the mapping is this,
- <ns0:CSV>
    - <SLI>
           <PERIO> </PERIO>
           <ILN> </ILN?
           <EAN> </EAN>
perio, iln, and ean was rooted on SLI field. and the CSV is the rootnode of the target message.
I have created a UDF on the message mapping to accomodate the output customer name, here is the codes:
String fname="";
if(GLN.equals("23456"))
fname ="Globus" +dat;
else if(GLN.equals("5678"))
fname ="Karstadt"+dat;
else if(GLN.equals("6789"))
fname ="Metro"+dat;
DynamicConfiguration conf = (DynamicConfiguration) container
    .getTransformationParameters()
    .get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create(
    "http://sap.com/xi/XI/System/File",
    "FileName");
    conf.put(key,fname );
E.g.,
Globus --> 23456 (Sender GLN)
Karstadt --> 5678 (Sender GLN)
Metro --> 6789 (Sender GLN)
This UDF i've made in the Message Mapping was mapped in the root node CSV.
Is this UDF correct?
Then on the File Receiver Configurations, here are the configs,
Transport Protocol: File System (NFS)
Message Protocol: File Content Conversion
Adapter Engine: Integration Server
File Access Parameters
Target Directory: /var/opt/gsss/sample/csv
File Name Scheme: .csv
Processing Parameters
File Construction Mode: Create
- Overwrite Existing File
Write Mode: Directly
File Type: Text
Variable Substitution --> ???
Adapter Specific Message Attributes
- Use Adapter-Specific Message Attributes
- Fail if Adapter-Specific Message Attributes Missing
- File Name
Run Operating System Command After Message Processing
Command Line: chmod 664%F
Content Conversion Parameters
Recordset Structure: SLI
SLI.addHeaderLine: 3
SLI.headerLine: PERIO;ILN;EAN
SLI.fieldSeparator: ;
SLI.endSeparator: 'nl'
Adapter Status:
Status: Active
Kindly advise if my configs are correct.
Thank you very much!
Fred

Setting dynamic file name in Receiver file adapter - not from payload

Guys I just remember reading a weblog but can't find it now that I need it, on how to set the file name in message mapping dynamically but not using any payload field.
Please let me know if you remember this.
Thanks a lot,
Viktor Varga

also u can check in
<a href="/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii file name(XSLT Mapping with Java Enhancement) using XI 3.0 SP12 Part -II</a>
<a href="/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14: The same filename from a sender to a receiver file adapter - SP14</a>

Renaming attachment file name in receiver mail adapter

Experts,
I have a file to mail scenario where an xml file is picked up and transformed into the target format in XI which has to be sent as an attachement in an email on the receiver side.
I am getting the mail with the attachement. But I would like to rename the attachment as the name of the picked up file.
I am using Adapter specific message attributes on both sides but the attachment is named as untitled.xml.
Please advise. Can this be achieved by using the swap bean or the message transform bean?
Regards,
Shobhit

Hi Shobhit,
The module tab of your mail adapter will look like this.
Processing Sequence
Module Name                                                            Type                                      Module Key
localejbs/AF_Modules/MessageTransformBean   rename LocalEnterpriseBean
sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean mail     Local EnterpriseBean
Module Configuration
   Module Key               Parameter Name             Parameter Value
      rename      Transform.ContentDescription                      File
      rename Transform.ContentDescription attachement;filename="yourfilename.ext"
      rename            Transform.ContentType                 application/text;name="yourfilename.ext"
Thanks
Amitanshu

How can i get message id as file name in Receiver Mail Adapter

Hi All,
We are working on file to mail scenario. Client requirement is " Attached file name should be the message id" How can we achieve this.
Thanks & Regards,
Purshothamm

Hi,
To have the file name as message id, I think the below blogs can help you
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii
Regards,
Vijay N

Problem with File Content Conversion (Receiver FIle Adapter)

Hi Experts,
I have following structure in receiver side:
MT_Test
   F1
   F2
   F3
   F4
Now I want a CSV file in target side in below format:
F1,F2,F3,F4
I have provided below config in receiver file adapter under content conversion tab:
Recordset Structure : MT_Test
MT_Test.fieldSeperator= ,
MT_Test.endSeperator= 'nl'
But this is generating blank CSV files in target directory..What might be the reason.. I have checked the msg in adapter engine, the XML file is correct and contains valid values for the fields..Its something like below:
<?xml version="1.0" encoding="UTF-8" ?>
<MT_Test>
   <F1>Hai</F1>
   <F2>Hello</F2>
   <F3>Bye</F3>
   <F4>Hi</F4>
</MT_Test>
I should get CSV file as
Hai,Hello,Bye,Hi
But I am getting a blank file with above said config parameters in content conversion tab.
What might be the reason for getting blank CSV files in target side???
Thanks,
Adi

Hi Adi,
>>My target structure in below format:
<?xml version="1.0" encoding="UTF-8" ?>
- <MT_Test>
<F1>Hai</F1>
<F2>Hello</F2>
<F3>Bye</F3>
<F4>Hi</F4>
</MT_Test>
So, try to edit Data type and include hierarchy level above <F1>.
Finally your Target Structure will resembles like this.
<?xml version="1.0" encoding="UTF-8" ?>
- <MT_Test>
<Structure>
<F1>Hai</F1>
<F2>Hello</F2>
<F3>Bye</F3>
<F4>Hi</F4>
</Structure>
</MT_Test>
FCC Parameters will be like this.
Structure.fieldSeparator = ,
Structure.endSeparator = 'nl'
Hope you were clear.
Thanks,
Siva.

Archiving files in the Receiver File Adapter

Hi All,
I am trying to archive the file created in the Receiver File adapter. Reading from the link below,
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
I gave the command cp %F <target dir> in the Command Line of "Run Operating System Command After Message Processing". As well as I tried cmd.exe copy %f <target file>
But it does not work. Can anyone please help me out?
Thanks
Shivanjali

Hi Aamir,
For my case its not feasible to make a bat file...
I want to write a direct OS command in adapter only.
Do you know what is the basic difference for running OS command before processing and after processing.
In my opinion if i use a OS command after file processing then it ll take a file name with timestamp so there may be a problem...
thanks
Shivanjali

Change file extension in receiver file adapter

File to File Scenario
Posted: Sep 11, 2006 3:47 PM Reply E-mail this post
I am working on a File to File scenario.
Source System gives out a file: abc ( with no extension)
We need to archive it as: abc.done
And we need to send it to a FTP server ( receiver File adapter) as abc.txt.
How can I append a file extension when I archive and
how can I change the file extension in the receiver File adapter?
FYI, we are using XI as FTP server so I have created dummy message interface with no mapping.

Hi,
If I understood correctly once XI picks up the file it should be archieved as filename.doc and then it should be FTP'ed to a different location with a change in extension filename.txt.
1. To Archive in the sender communication channel you can use OS Commands after prosessing (>=SP14) to rename the file and archive it. Suggested write a batch file which will rename the file and call the batch file from the OS Command of the sender file adapter. You can either use Archive functionaliy of the Sender adapter or you can write one more command in batch file to move the file to different folder. Make sure you are using fullpath while writing batch file.
2. As said use dynamic configuration in a dummy mapping and then get the source file name and change the extension.
http://help.sap.com/saphelp_nw04/helpdata/en/43/03612cdecc6e76e10000000a422035/content.htm
Thanks,
Prakash

"Put file" Option in Receiver File Adapter

Similar Messages

Maybe you are looking for