"Put" files not showing up on website

I am hoping this is a relatively simple problem I am encountering. I have been given a site (http://urpl.wisc.edu/people/marcouiller/projects/clearinghouse/Tourism%20Resources.htm) to edit using Dreamweaver and many of the links that are listed are linked to nonexistent pages. I am trying to hyperlink these broken links to actual webpages and it was working fine for awhile. During the past couple of days however, after I "put" the changes to the server, the changes are not showing up on the website. The server displays that it was updated at that specific time and date and the preview page shows the correct links when I open it, but nothing changes on my actual site. I have tried clearing my cache and opening the page in different browsers, but still no luck. I have also tried disconnecting and then reconnecting to the host server and simply restarting Dreamweaver, but all to no avail. Any suggestions on how to fix this problem of changes not displaying on my website?
Much thanks!
-Ben

Are you using a Defined Site in DW or just editing individual pages and uploading?
Could you accidentally be loading the files to the wrong folder on the server?
Your site does have quite a few coding errors (64+ on the first page). You should go through the validator to clean those error up, though they likely don't have much to do with the problem at hand, it's still best for cross-browser performance and display to use correct html mark-up.
http://validator.w3.org/

Similar Messages

HT4101 I am trying to connect my JVC Hard Disk Drive Camcorder to my IPAD 2 via the Apple camera kit. I am able to down photos, but video files not showing. Camera shows Mass Stoarge. How can I download videos please.

I am trying to connect my JVC Hard Disk Drive Camcorder to my IPAD 2 via the Apple camera kit. I am able to download photos, but video files not showing. Camera shows Mass Stoarge. How can I download videos please?

The file name only has 6 characters and I'm not sure what the .mod format is. So that's why they are not seen by the iPad.
Another way to transfer. You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
Secrets of the iPad Camera Connection Kit
http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
 Cheers, Tom
Look at this link for convertion the .mod format.
http://www.makeuseof.com/tag/convert-mod-camcorder-video-format-mpg-instantly/
Message was edited by: Texas Mac Man

External Drive Files Not Showing Up on Mac but files do shows Up on PC

External Drive Files Not Showing Up on Mac but files do shows Up on PC
i had the Ex HD for about 3 years running smoothly on my mac but recently everything disappeared. plunged it into a pc to see if it read my files and it did. what can i do? to make it work on mac again. i don't want to reformat that drive because i have important applications (DMG) and other zip photo video files in the drive.

yes. i did.
...i have tried "verify" & "repair" but they didn't pass the san test. and when i "unmounted/mount" a error message popped up say that there is a application running off the drive but there nothing (i see) running, to close all activity

Sharepoint Report Subscriptions not showing on sharepoint website, but are in the database

Hi All,
We have had an issue which sharepoint where our subscriptions for reports "disappear" from the website. This makes is a little hard to edit them if we need to adjust the subscription. The funny thing is the subscription is still working as it is
generating emails.
I was able to check SQL and look at the ReportingService Database and I can see all the subscriptions listed in SQL.
So the subscriptions are there. The question is, why are they not showing on the website.
Here is a query I used to show the subscriptions:
SELECT
      UserName
      , Name
      ,[Locale]
      ,a.[ModifiedDate]
      ,a.[Description]
      ,[LastStatus]
      ,[EventType]
      ,[LastRunTime]
      ,[Parameters]
      ,[DataSettings]
      ,[DeliveryExtension]
      ,[Version]
      ,[ReportZone]
FROM [ReportingService_SP].[dbo].[Subscriptions] as a
inner join ReportingService_SP.dbo.users as b on b.UserID = a.OwnerID
inner join ReportingService_SP.dbo.[Catalog] as c on c.ItemID = a.Report_OID
order by Name
Any ideas would be great

Also I found the ReportZone Column had 2 results 0 or 3
I noticed everything that had a 0 showed on the website where 3 did not.
I also saw something saying this might have to do with the AAM and having different addresses, but we only have one address

File not showing in SharePoint (IE) but visible in Explorer

I have a document library that has a single file not showing up that I can't seem to track down. I am hoping someone here might be able to offer something I haven't thought of.
The document library is very much 'stock'. Verisioning is turned on and minor revisions aren't viewable to folks without edit rights. I am the admin with full control to everything - as is the user this initially impacted. The file will show
in the Explorer view - but isn't viewable in an 'all files' file via the browser or when attempting to open via Excel. If we provide the full path/file it does open successfully in Excel and offer the Check Out option - but it won't show up
in the 'File Open' dialog.
I thought at first it might be a matter of not having a version checked in - but it isn't showing under "Manage files which have no checked in version" menu. I've gone through the various SharePoint view options and can't find anything there either.
What would make a single Excel file in such an ordinary document library not be visible to users with full control rights? We have roughly 80k files stored in SharePoint overall - so please don't read this as being our initial test of SharePoint.
I'd really appreciate any ideas...
-Troy

Just to add a few more details. I have been able to add the file to a different library and they uploaded fine. The library in question is created off of a template and has 2 metadata fields. The fields are also being used in the other library, but that
was created from a different template.
The site and initial 4 libraries were created from a site template and then the library was added from a different library template. Checking ULS logs now, but doubtful I will find anything.

IPhoto files not showing up in list

I have many photos on my new MacBook Pro, but when I try to "attach" them to emails, they are not showing up in the listing. I am a new Mac user, but so I don't know how to explain this. If this was a PC, it would be like files not showing up under "My Computer." PhotoBooth photos are listed though. Why is this?

Then something has happened to the permission and or attribute settings on your folders to mark files saved in them as hidden.
Try this Terminal command to show all files and you can turn it off by changing the true to false at the end of the command.
defaults write com.apple.finder AppleShowAllFiles -bool true
If you then see your files tere is a problem with files being market as hidden when they are saved. Create a New Folder in the Root of the drive and look at its Get Info window and post a screen shot of it in this thread.

Files not showing up in folders

Files not showing up in folders. Saving files to folders, opening folders which are blank

Then something has happened to the permission and or attribute settings on your folders to mark files saved in them as hidden.
Try this Terminal command to show all files and you can turn it off by changing the true to false at the end of the command.
defaults write com.apple.finder AppleShowAllFiles -bool true
If you then see your files tere is a problem with files being market as hidden when they are saved. Create a New Folder in the Root of the drive and look at its Get Info window and post a screen shot of it in this thread.

The Path to nowhere - help! swf files not showing in browser

i need help with getting a swf file to show in the browsers. (it previews in dreamweaver)
created a website in dreamweaver cs4. created a simple slideshow in flash 4.
on the index.html page inserted the flash file.
it previews in dreamweaver BUT when i text in browsers it shows as a white box.
have been reading through all the info about paths etc.
can you simplify this entry below from adninjastrator on the adobe forums sept 19 2011???........
"Still looks like a pathing problem to me. For review:
Pathing issues
Almost always when it works on the local machine and not the server, it's a pathing problem.
You can put your Flash related files in whatever folders you want, they do NOT have to be in the root, they do NOT all have to be in the same folder. But if you have a problem and if sticking them all in the root folder works, then you know that the issue was a pathing problem.
Just remember that paths used in the .swf become relative to the Web page on which the .swf is placed, NOT it’s physical location. So for example, if your .swf is in the flash/data folder and you use that .swf on a Web page in the root folder, you are in effect, removing that .swf from flash/data and putting it in root. So if the .swf is loading any related files (xml, images, video, etc), the path used inside the .swf to load the .xml file has to be relative to it's new location in root and then back down into flash/data. This is true even though when testing the .swf by itself, it can be inside flash/data and work just fine, since relative to it's location, the path is just fine, they are in the same folder. But if that same path is used when the .swf is placed on a page two folder levels up, the relative path has changed, the old "same folder" path will not work.
In fact if you are placing the .swf on a web page in a different folder than the .swf is stored in, and that .swf calls external assets, then direct clicking and opening of the .swf in it’s folder should NOT work! That’s because the paths to the external assets should be relative to the Web page and not the physical location of the .swf.
So just be sure that you use addresses relative to the final Web page locations (not physical file locations) and you can put the Flash related files in what ever folders you want.
Best wishes,
Eye for Video
adninjastrator"
here is my code...
<div align="center">
        <object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="350" height="200" id="FlashID" title="2812gtbroslides">
          <param name="movie" value="/2812gtbros.swf" />
          <param name="quality" value="high" />
          <param name="swfversion" value="6.0.65.0" />
          
          <param name="expressinstall" value="/Scripts/expressInstall.swf" />
          
          
          <object type="application/x-shockwave-flash" data="/2812gtbros.swf" width="350" height="200">
            
            <param name="quality" value="high" />
            <param name="swfversion" value="6.0.65.0" />
            <param name="expressinstall" value="/Scripts/expressInstall.swf" />
            
            <div>
              <h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
              <p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" width="112" height="33" /></a></p>
            </div>
            
          </object>
          
        </object>
        <br />
thanx
wwwww1325

i am not sure why this sounds so foreign to me.....
i understand the page code instructs the browser to find and load the flash file from a path.
i do not understand "/2812gtbros.swf (i.e. start at the root of the site and look for that filename in that location)
i have the html fla and swf file in the folder on my computer named 212GTflashpics (2012freelance/2012gtbrothers/212GTflashpics/2812gtbros.swf) and i have it in the website folder GTbrothers1 with all the images scrpts sprys and html files
the files be in the website folder o
in your previous Question...
"This line -
<param name="movie" value="/2812gtbros.swf" />
is telling the browser to look for the flash file in the root of the website. Is that where it is?"
what is before the / in the value=" /2812gtbros.swf? wouldnt that tell us the path of the file?
thanx

How do I fix a problem with .eps files not showing up properly in icon view

Actually my .eps files are not showing properly in any of the views but icon view is most important to me. I am using OSX.8.5 on a mac mini and mac book air. Almost all of my .eps files are conversions of .wmf files converted to .eps by WMF Converter software. All of these files used to be on a PC running windows Vista using ST Thumbnails explorer to be able to view thumbnails. For background info: I had to use a program to view the WMF files becasue hackers could put viruses into the thumbnail for WMF fies so instead of fixing the problem Microsoft disabled the thumbnail view for all WMF files.
A few of my .eps files are conversions of files created in CorelDraw 3x and converted to .eps in CorelDraw 3x. Both types of .eps files misbehave the same.
I downloaded one .eps file today from the internet to see if it would misbehave the same way (it does).
Here is the problem: After a reboot when I first view a folder that contains .eps files in icon view I can see the file contents fine. If I use the resize slider at the bottom of the window or resize the window itself then some or all of my .eps files revert to displaying the "generic icon" of a Loupe with a picture behind it. If i can manage to put the resize slider to exactly where it was then my icons display the file contents as they did before I messed with the slider. There seems to be no rhyme or reason as to when an icon will display as the file contents or when the generic icon comes up. In some folders all the icons display correctly at the smallest icon size and in other folders the icons may display correctly or as only generic or a mix of generic and file contents. Icons to files that came from the same source will not necessarily display the same way. Icons to files that came from the same source and were converted by WMF Converter at the same minute do not necessarily display the same way. If I display "info" for the files sometimes the previev pane of the info box will display the generic icon or sometimes it will show the file contents. If I take an .eps icon that displays properly and drop it into a folder where all .eps icons are displayed as generic then that icon displays generic. When I move that same icon out of that folder then it will display properly. Icon view, list view, column view and cover flow view all display differently with no discernable pattern. Sometimes I can see file contents in column view and not icon view. Sometimes in cover flow and not in icon view. It makes no difference if I have a handful of .eps files in a folder or hundereds of files in a folder. After an undetermined amount of time the icons might display properly again or maybe not.
What I have done so far: exhaustive search of the internet did not find anyone else with the same issue. I checked and fixed all disk permission errors that disk utilities would fix. I know that icon view and quick look are two different things, but, I did however, download and install an eps quicklook plugin that did not seem to make a difference for my issue. BTW Quick look sometimes works and sometimes not (no discernable pattern to this behavior either). I tried the cnet download fix for quicklook just for grins. It had me force QL to reload plugins and it's cache then I cleared out the QL configuration files. This did not seem to make a difference in the behavior of icon view or Quicklook. The only two things I have found to be consistant are 1) The "open with preview" always works but I know this is different because this preview actually generates a pdf view of the file. 2) When the icon does display the file contents it always displays correctly.
When you read this please be mindful of: I am a Microsoft refugee not yet familiar with the Apple world so you may have to tell me how to do "simple" things. I have no idea what is the difference between a "thumbnail" or a "preview" or the behind the scenes way that apple generates the icon appearance for the 4 different views.
Any assistance would be greatly appreciated. I tried to insert a screen shot but got an error message when I did it.

Was the error number really 0XE8....
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

EXCEL out put is not showing data

Hi All,
My report is working fine it is showing data in XML but it is not showing data in Excel output. Excel output is empty.
i have attached excel and xml files. please help me.
FYI: these are migrated reports from 10g to 11g.
Thanks in advance for your time

Using ua.bat we upgraded 10g to 11g., we got sucessfully message.
after upgrade if i try to open excel it is not showing opening and showing action instead of excel name . I though excel out put has corrupted. i downloaded excel layout from 10g and uploaded in 11g report using upload layout.
we did not make any changes in database.
below one is not related to this one but .. after upgraded reports multi parametrs did not work if i select more than one column ( i opened as different topic) then i have removed
( (coalesce(null, :P_PPD_REGION) is null) and kept(region.X_REGION in (:P_PPD_REGION) from following statement then i did report is working with multi parameters.
my doubt is is it correct thing i did ? if not how can my multi parameter will work . we are using oracle as database.
AND ( (coalesce(null, :P_PPD_REGION) is null) or (region.X_REGION in (:P_PPD_REGION)) )
AND ( (coalesce(null, :P_COUNTRY) is null) or (region.REGION_CD in (:P_COUNTRY)) )
AND ( (coalesce(null, :P_SITE_NUM) is null) or (ptcl_site.site_num in (:P_SITE_NUM)) )
I really appreciate for your support.

Not all iTunes Files not showing up on External HDD

My old TC (the flat model from back to 2008 I think it was) broke down the other night so I removed the WD 2.0TB HDD (containing over 30'000 music files) to run this as an external HDD. I had swapped the original 500Gb with a 2TB drive which worked super for a couple of years.
Anyway, before all of this happened all songs showed up on iTunes and each single one could be played correctly from iTunes (without the ! should the file not be found) so all files were located through iTunes to the correct directory. Only one directory for my Music files...
Now, when I connect the HDD through an USB cradle (nothing has been touched on the drive) only a fraction of the files actually show up in the directory which is very odd indeed? I believe it was the same when the thing was actually working but didn't give it a think as it was doing what it was expected to do.
Next step was that I copied the whole HDD over onto my MAC and sizewise all (?) the files came over but still not all are showing...
So, how can I make sure all the files are being included as I want to move them all over to my new 2TB TC?

Thanks Limnos for taking your time with this.
Here's what happened
1) All my Music was stored on a TC 2.0TB WD hard disk which I shared with my partner.
2) All music in iTunes were mapped to this specific location and only this location.
3) When opening the folder on the TC only a fraction of the actual music folders were available to see (i.e. Artist The Wonder Stuff folder was present and in this folder only 2 album folders were found when in fact there should have been 12)
4) All songs in iTunes did play correctly so if i wanted to listen to one of the The Wonder Stuff songs they would all play (even albums that did not show up in the artist folder from above).
5) When clicking show file in finder, the file would show up and then again when going back manually into the folder as above.
6) TC dies on me. No more power.
7) Took out the HDD and put it in a cradle to extract the songs.
8) Right click on the folder shows there are about 35'000 files which sounds right BUT only a fraction of these can be seen.
9) Now I cannot do the show in finder through iTunes as the directory no longer exists (the TC died and I threw it away, except for the HDD).
10) The files are on the HDD but I cannot see but a fraction of them when opening the folder...
I hope this makes it a little more clear.
I honesty do not know what to do as I know the files are there but cannot see them and thus map them in iTunes... :-(

FLV file not showing up on page

I am a novice with Dreamweaver. I created a site several
years ago using just Contribute 2. Yesterday I used Adobe Media
Encoder to encode some QTs to FLV (.f4v) files using a preset for
Flash 8 compatible FLV files. I created a completely new html page
in Dreamweaver and inserted the FLV file onto the page. When I use
"live view" the page works and plays the FLV file perfectly. Then I
save the file and save to the server. The page updates perfectly
EXCEPT for the flv file. In Firefox it says I need the latest Flash
version, (which I don't) in Safari, it just shows up as a blank
spot on the page, but there is a warning at the bottom of the page
and it allows you to see what the error is.
The browsers "activity" window says:
http://www.veralith.com/FLVPlayer_Progressive.swf
not found
Did part of the code - the FLVplayer - not get uploaded to
the server maybe? What could have gone wrong and how do I fix it. I
did not write special code to get the FLV file to play on the web,
I just used the insert function and thought that Dreamweaver was
going to do the rest for me "behind the scenes."
Any help would be much appreciated. I read as many "help"
files as I could, but I just don't know what I'm searching for. The
website is www.veralith.com. I'm trying to update the "demo" page
by adding about two dozen FLV files, eventually. Right now, there's
only supposed to be one on that page, but it's not showing
up.

shullfish posted in macromedia.dreamweaver:
> I thought that when you use the Insert>Media:FLV
function in
> Dreamweaver, the .swf and .js files are supposed to be
created
> automatically.
Hmm. I just did a test with CS3 and it did exactly that.
1. Created a new HTML page and saved it in the defined site
folder
2. Insert->Media->Flash Video
3. Browse to the .flv file (also in the local site)
4. Chose a skin
5. [OK]
6. Save
A dialog box appeared informing me that it created a Scripts
folder and
that I should upload that folder to my server.
There are now two .swf files in the same folder as the new
.html file.
They were not there before.
1. FLVPlayer_Progressive.swf
2. Clear_Skin_1.swf
Mark A. Boyd
Keep-On-Learnin' :)

RAW files not showing when I shoot raw + Jpeg!!!

I have a strange issue that has only recently started happening. I have started shooting raw + jpeg to speed up post processing. However, after I import the files into Organizer the raw files will not show. At first I thought it was the camera. So I used a different brand DSLR. I had the same issues with my Sony and my Canon. I have shoot raw with the Sony for years and never had an issue. I have shot raw with the Canon and haven't had an issue. It is only when I shoot raw + jpeg. I formated both cards prior to using them.
The files are there and not damaged. I used the software from Sony and the software from Canon and was able to view the raw files. I wanted to make sure what I put was accurate so I tried viewing the files again. Even with the Canon software when I tried to view some of the raw files full screen it wouldn't let me.

I am using PhotoShop elements 10. My cameras are a Sony a230 and Canon 60d.

.dng files not showing as thumbnails in Mac Finder

Hi.
I'm in the process of converting to Lightroom for my photos on my Mac, and when I've downloaded the sample .dng files for the tutorials I notice that they do not appear in my Mac Finder folders as thumbnails. Clearly this is a bit of a disadvantage where photo files are concerned.
The .dng files I've downloaded all appear as identical graphical icons that look like a camera aperture.
Is there any way to get these files to show up as thumbnails on my Mac please?
I'm running OS X 10.9.4 on a MacBook Pro.

They are the sample files available at the official Adobe Lightroom Support website, for use when following the official video tutorials. The metadata on them shows them to be from a Canon EOS 5D MkII.
They can be downloaded here:- How to manage your digital photos | Adobe Photoshop Lightroom tutorials If that link takes you to the overview page, they're in the block on the far left of the page, called 'Getting Started'.
(Actually, could you possibly do me a favour and download them from there to see if they show up as thumbnails on your computer? If they specifically don't, but other .dng files do, then it would prove that it is something about the files themselves that are to blame.)

Some files not showing anymore in folders on smb-share (lc_ctype error)

I use a shared folder on my iMac for my work projects.
After the upgrade to Mavericks, I noticed that Dreamweaver CS 6 did not show all files and folders anymore in several projects.
This is on a Windows 7 machine.
The same thing happens when in FileZilla, so it's not a specific Dreamweaver issue.
When I go to a troubled folder in FileZilla I get this error (in Dutch):
"Een lokale bestandsnaam kon niet gedecodeerd worden. Zorg ervoor dat de LC_CTYPE (of LC_ALL)-omgevingsvariable juist is ingesteld. Totdat u het probleem oplost, kunnen er bestanden ontbreken in de bestandslijsten. Er zal geen waarschuwing meer getoond worden gedurende deze sessie."
Translation:
"A local file could not be decoded. Ensure that the LC_CTYPE (or LC_ALL) environment variable is set. Until you solve the problem, you are missing files in the file list. There will be no warning displayed during this session properly."
When I go to thew same folder in Windows Explorer all files are shown.
When I use Dreamweaver CS6 on the iMac no errors occur and every file just shows fine.
It seems it only occurs in random directories of the local files of website projects I maintain with Dreamweaver
If anyone ones how to fix this, I would realy REALY appreciate this.
This totaly kills my workflow.

Pages documents compatible with Windows Shares, because they are by default, written as single-file, compressed folders with .pages extension:
Pages ’09
Pages v5.5.1
Pages documents incompatible with Windows Shares, because they are written as uncompressed packages (folders). These need to be explicitly compressed (e.g. foo.pages.zip) by the user before deposited on Windows shares. (Right-click menu on Mac file icon)
Any Pages v5 document by default (or Pages v5.5.1 where optionally written as a Package file type)
Pages ’08, and Pages ’09 optionally saved as packages (folders)

"Put" files not showing up on website

Similar Messages

Maybe you are looking for