Put, Get , Connection buttons greyed out

Hi All,
I am pretty new to Dreamweaver but not to web development. I
have set up and connected a few sites from my own PC. It all goes
just like it says in the manuals.
But I got called into a client site who have an existing site
set up in Dreamweaver. The DW person left and the current person
wanted some coaching. Well the Code, Split, Design views all came
up and we could edit just fine.
But over on the right, above the list of files, all the
buttons (put, get, connection etc.) were greyed out. At first I
assumed the FTP connection was not set up, but it was, because when
we saved files, they saved straight to the live site.
So I went over to look at Site / Manage Sites. The FTP
connection was listed, but many of the other options (all the
categories within Advanced) did not seem to be available. They were
not just grayed out - I could not even see the list of them.
I have been fiddling around at home on my own sites, trying
to figure out how to recreate this and I can't. I can figure out
how to put myself onto live updating (update to remote FTP on Save)
but I don't get the other buttons greyed out just because I am
working like this.
Any ideas? I'd like to be able to go back there, take them
off live updates and restore the buttons.
Thanks
Abigail

Unless one is working in ColdFusion, or has special
requirements, the FTP &
RDS server option should never be used.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Alan" <[email protected]> wrote in
message
news:C4F834C6.30E30D%[email protected]..
>A guess- they set this up as an "RDS" ftp site, and it is
editing the live
> files on the server.
>
> To make a regular ftp site connection, make a New site.
> If it's CS3 version, make sure you pick "site" and not
"RDS"
> Enter all the details, and make a "regular" ftp
connection, not an RDS
> connection.
>
> --
> Alan
> Adobe Community Expert, dreamweaver
>
>
http://www.adobe.com/communities/experts/
>
>
>

Similar Messages

  • Agent email help - buttons greyed out at one location

    The setup:  Two call centers.  One in NC and one in CA.
    The one in NC, which is where the call center servers are, has no issues with email buttons becoming active.
    The one in CA, every morning when the agents login the email buttons will not become active unless the users do the following workaround
    Start agent.
    Run and IE url that was given to me by Cisco.  http://<ipaddress of ccx server/EemUi/index.jsp?port=59015
    This will force Java to start and have the java icon appear in the system tray.
    Email buttons become active
    Close IE window (which make email buttons grey out again)
    close and restart agent
    Email buttons work.
    I only have this issue in the CA office.
    I had them ship a desktop to me in the NC office.  I connected it and did NOT have an issue.  Everything works perfectly here.
    Is the issue tied to the distance?  Is there some java time out setting I can tweek to make this work.
    I didn't have this problem with 8.5 su 2.... it happened after the update to su 3
    Anyone seen this?  Cisco has no answer.

    I bounced this around the office to get some ideas.  One question - how long is the CA office waiting for the email buttons to become active?  That is, setting the workaround aside, if they wait long enough, do the Agent E-Mail buttons ever become active?    The thinking is that could be a factor as the entire applet is around 40 MB. If connection speed isn't great it could take a while to download which would explain the scenario.
    Tom

  • After installing Mavericks I can no longer save a new word document or pdf by typing the name of the destination folder in the Finder window.  The save button greys out.  Solutions anyone?

    After installing Mavericks I can no longer save a new word document or pdf by typing the name of the destination folder in the Finder window.  The save button greys out.  Solutions anyone?

    Please follow these directions to delete the Mail "sandbox" folders. In OS X 10.9 there are two sandboxes, while in 10.8 there is only one. If you're running a version older than 10.8, this comment isn't applicable.
    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Containers/com.apple.mail
    Right-click or control-click the highlighted line and select
              Services ▹ Reveal
    from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder—not just its contents—to the Desktop. Leave the Finder window open for now.
    Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window.
    This action will delete any custom Mail stationery that you have created. If you want to preserve it, ask for instructions.
    If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Repeat with this line:
    ~/Library/Containers/com.apple.MailServiceAgent
    Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • Hi, i am using iphone4s.. 2 days ago i had a problem with wifi.. button greyed out, it was suggested to keep phone in freezer, worked temporarily and i updeted to ios7.1 but still facing same problem.. wht to do? cant afford to throw off :/ huhh..

    Hi, i am using iphone4s.. 2 days ago i had a problem with wifi.. button greyed out, it was suggested to keep phone in freezer, worked temporarily and i updeted to ios7.1 but still facing same problem.. wht to do? cant afford to throw off :/ huhh..

    well, you know how it is - glitches that usually resolve with a hard reset etc
    then a restore. then a factory restore....then ..... nothing fixes so I try the next step with apple online - fill out my serial number and find it is a couple of weeks out of date - and then with the holidays who has time to get to the apple store? this is my second 4s handset as it is - first one the glass cracked from L to R without any impact/damage etc - they changed it out automatically because it's a 'known fault' apparently - so technically, this handset is only 6 months old - but warranty is from original purchase date -
    never imagined it would turn out to be a warranty issue with the phone - and hey maybe when I get a chance to go to the apple store they'll be sympathetic, but I won't be able to get there till at least Jan 4th as it is. On the other hand, another iOS update might resolve the issue - but how long till that release? at the moment I'm having to use my old 3gs for wifi and 4s for phone!!!

  • Submit Button Greyed Out (v 4.0.5)

    I have been using Compressor successfully for about a year.  Recently it updated to v4.0.5.   Now I am not able to submit, with the final Submit button greyed out.  I have checked my Destination folder permissions and all appear correct.
    What could be the cause of this, and what shall I do?  I need to render a program urgently for broadcast.
    Thanks
    Geoff

    I just resolved a similar problem.  I am running OSX 10.6.8 on a MBP 13" 2010.
    Once inside Compressor I'd click on "submit" and the drop down window would show "none" next to "Cluster:" and the submit button was greyed out.
    I called Apple Care and they had me delete the preference file "com.apple.Compressor.plist" file from my user>library>preferences folder.  This did not fix the problem on its own.
    They then had me delete the Apple Qmaster folder from user>library>application support.  This did not fix the problem on it's own.
    I then reinstalled the Compressor application itself.  This did not fix the problem on its own.
    I then verified permissions and repaired permissions using disk utility.  This did not fix the problem on it's own.
    I then clicked on "Share Monitor" which is found on the Compressor task bar.  "This Computer" was displayed in the left column.  I simply clicked on it in order to high light it.  I left the "Share Monitor" window open and went back to the submit panel and "This Computer" was now displayed next to "Cluster:" and the program is now working again.
    YMMV.

  • Itunes showing all data as other and sync button greyed out

    Itunes showing all data as other and sync button greyed out.  I have downloaded and installed Itunes 11 (multiple times) and restored my phone twice already, but I am still not able to sync my Iphone 4 with Itunes.
    When I select / de-select Apps on Itunes to remove from the phone the "Apply" button does appear, but after I click it nothing happens.  Then the greyed out "sync" button just appears again.
    Anyone with some advise please?

    Try Restarting or Resetting your touch.
    Restart: Hold the Sleep/Wake button until the red slider appears and turn off your iPod. Press the sleep/wake button and hold it until you see the Apple icon.
    Reset: Hold the Sleep/Wake button and the Home button at the same time. The red slider will appear first, keep hold everything until you see the Apple icon. Release the buttons.
    Check your iPod and see if your music and apps have reappeared. If they do after either option, then resync your iPod.
    If neither works, then Restore your touch through iTunes.

  • My wifi button greyed out...pls help

    hi all users,,,my iPhine 4s wifi button greyed out suddenly
    tried the temperature trick but problem persists
    pls help anyone
    thanks

    Try the suggestions here to see if they resolve your problem:
    http://support.apple.com/kb/ts1559
    If these don't work you probably have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

  • Site Put button greyed out in CS4

    i am attempting to migrate from MS front page to dreamweaver.
    as i try to publish one of my sites using the Site>Put command,
    i'm finding that it is greyed out, along with many other menu
    items. the ftp settings/server connection seem to be testing just
    fine so i'm at a loss. thanks.

    in the dreamweaver Files Panel, when this site is open, is
    the icon next to
    the site folder a folder icon, or a network icon?
    If a network icon, it is an RDS edit live remote site. There
    is no "put"
    make a new site definition, and this time pick "site" and not
    "RDS"
    > i am attempting to migrate from MS front page to
    dreamweaver. as i try to
    > publish one of my sites using the Site>Put command,
    i'm finding that it is
    > greyed out, along with many other menu items. the ftp
    settings/server
    > connection seem to be testing just fine so i'm at a
    loss. thanks.
    >
    Alan
    Adobe Community Expert, dreamweaver
    http://www.adobe.com/communities/experts/

  • Windows Deployment Service. Network Profile Radio Buttons greyed out with R2

    Hi All
    I have downloaded and setup Server 2008 R2 (not yet activated). I have added the following roles "DHCP Server", "DNS Server", "Active Directory Domain Services" and "Windows Deployment Services". I can PXE boot a test client machine and (using the boot.win from windows 7 dvd) multicast a XP Image to it. This setup is connected via a 100 Mb switch and is an isolated network. 
    Under windows deployment services - if I right click my server - select properties - network tab "Network Profile is greyed out". I have tried running wdsutil /Set-TransportServer /Server:big /Profile:100Mbps but get the following error message: "Windows Deployment Services Management Utility Version 6.1.7600.16385. Error code 0xC110011F This WDS transport server does not support network profiles.
    I have tried this on two hardware setups:
    An Intel D915GUX 3GHz 2GB RAM and Marvel Yukon 88E8050 ethernet controller.
    An Intel D965 Core2Duo 1.86GHz 2GB RAM and  Intel 82566DM Network controller.
    Incidently I have done the same setup with Server 2008 (not R2) on the D965 and the Network Profile radio buttons are not greyed out. If I upgrade the same test machine to server 2008 R2 the Network Profile radio buttons are greyed out. Is this a design change, does Server 2008 R2 no longer support network profiles as I am now unable to select 10 100 or 1000 Mbs ?
    If more information is required or if anything needs further detail please let me know.
    Thanks for any help.
    Liam.D

    Is there any way at all to manually set or control the network profile? In my environment, a SCCM\WDS multicast stream is bottoming out on speed and network utilization when the stream crosses a Nexus 7009 router. Speeds go from 200 Mbps to 20 mbps. I have
    a theory that this "new" automatic configuration is placing the clients in a slow network profile that are on the opposite side of the router and I have been unable to find a way to speed of the transmission. I have also ruled out the "master
    client" slowing down the stream buy using different clients only connecting to a stream 1 at a time. I have also ruled out the router as the source of the problem by having a VLC client listen to the multicast stream on the same side of the router as
    the slow clients. The VLC client (unknown to SCCM\WDS) was able to receive the transmissions at 20 % utilization / 200 Mbps.
    -Tony

  • ITunes does not sync - button greyed out

    I recently updated my 3gs to the new software, and my new ipad (3rd gen) is also running on the latest software. I also have the latest iTunes.
    Up until 3 days ago, everything worked fine. Now however, whenever I plug either of them into my computer to sync some new music (or anything else) on, the sync button is greyed out.
    So far I have tried :
    Restoring my iphone [+ it seems my backup is missing all my apps/music]
    Erasing ALL apple programs (itunes, updater, quicktime etc.), and then reinstalling [I've done this all twice now]
    switching USB ports
    Restarting both my computer and iPhone/iPad
    Authorizing my computer again
    I cannot drag and drop music onto my devices or use the sync button.
    However none of these work for me. I now have nothing on my phone, and cannot put anything on it. This is incredibly irritating.
    Im starting to get very angry with these products. Apple is supposed to be reliable is it not?
    Someone please help me!

    i am having a iusses a little different hoping you can help me, my computer did not crash it is finr, its a gateway, windows 8, i undated my itunes to the new version, and can't get my other one back, i plug my ippod shuffle into the usb port and nothing happens, i tunes doesnt pop up, my ipod icon doesnt come up in the new version of itunes i cant sync it to nothing, i have no idea how to add music and now clue how to use this itunes. i am getting a new ipod tomorrow and i have no clue how to add music to it now.. can you help me?

  • Submit button greyed out in Compressor

    All of a sudden when I try to compress a .mov the "Submit" button is greyed out. No matter what movie I try or what compression settings I try. Running FCP 7.0.3 MacBook Pro 2011 Lion 10.7.5. Plenty of space on HD, re-installed software, all usual troubleshooting.  When I drag the same movie to Compressor in my old Mac 2008 running snow leopard it lets me click "Submit."  Been running Compressor and Final Cut no problem till now.  Even compressed a movie tonight just fine.  Then, made some changes to the Final Cut Sequence, output new QT movie, bam - all of a sudden compressor won't work.  Can drag any settings onto the job, click submit button on the bottom, then when menu to name job drops down I can only click "Cancel" button.  "Submit" button is there but greyed out.
    Right before this happened I "cancelled" a compression that was processing in the Batch window. Would that prevent me from starting something new?
    Cannot seem to open the batch window to resume.
    Thank you,
    Patrice Shannon

    It's probably lost its connection to Qmaster. Running this utility from Digital Rebellion often is enough to get the links reconnected. 
    Russ

  • Why is Submit Button Greyed Out on Compressor

    Just recently, I have been unable to submit a video for compression. As always, I drag on the compression I want to use and select the destination. I hit the first submit buttn and the window drops down asking for the name of the batch. I enter the name but on this window the submit button is greyed out and I cannot submit the project for compression.
    I looked at past instances of this problem and I downloaded and ran Compresser Repair 2.2, but the problem remains.
    Any ideas would be greatly appreciated. I have never had this problem before.
    Barry O'Brien
    Compressor 3.5.3
    FCP 7.0.3
    OS 10.6.8

    Russ,
    No worries. Yesterday, I brought the Apple Clean Install instructions to pointed out to me to my IT guy I had him do a clean intall of Compressor using the outline and the problem was solved. It took him an hour. It would have taken me 1/2 a day!
    I did have one good bit of advice suggested by Jason Brown over at Creative Cow, but I didn't have time to research it - and my computer was already on my IT guy's bench. He said:
    "Let me start by saying I'm not an expert...just a user, so I could be wrong.  BUT  I fixed my issue after installing fcpx, it moved compressor to a subfolder in applications, but not the Qmaster app. When I ran update, it updated Qmaster to 3.5.3 but compressor was just on 3.5  I took compressor out of that folder, ran update again and they were same version number. U can check version number by looking about under file menu. For Qmaster, select app, get info and its in there."
    I think he is suggesting that Emaster and Compressor need simultanious updats, and to do that Apple has to be able to find the files. The fact that Apple has the clean install for Compressor so available and in multiple locations suggsts to me that this is a common problem.
    One of the Creative Cow guys said that his production company does complete clean installs off all apps on all machines every 12 to 16 months!
    Well, I declare this issue fixed, and thank you for all your help and advice. Hopefully, someone else will find this thread and it will be helpful to them.
    Regards,
    Barry

  • IChat video an audio buttons greyed out & contact list busted.

    Hi folks...
    I hope someone can help me. I just tried using my IChat again today and noticed that I can not make video or audio calls at all. Both buttons are completely
    greyed out and disabled. Then again they sometimes reactivate and suddenly start working... why the sporadic randomness? Simple text chat is fine but video and audio buttons are dead.
    Also I have non active and UNAUTHORISED contacts on my list that I just can not get rid of no matter what. I select the names.. go to EDIT/DELETE, they are removed only to re-appear a few seconds later in my list.
    I noticed too that I do not have a com.apple.ichat.plist on my machine at all.. is this normal?
    Thank you for your time..
    Chris

    Hi,
    The first thing that strikes me is that this is a Jabber account.
    You cannot Video to Non iChat sources.
    That means not to GoogleTalk Buddies that are logged in via a web Browser or PC users logged in with the App called GoogleTalk or any other Jabber app on Mac or PC.
    iChat Video with Jabber IDs is iChat to iChat only.
    Also check the View Menu > Show Statuses
    You can turn Off Show Video Status and your own Video icon will show but all your Buddies will display Audio Only icons
    Turn that off as well and you get a Buddy List like yours  (no green icons for Buddies).
    This will effect AIM and Jabber Buddy Lists alike as well as the Bonjour one if you have it active.
    Deleting Buddies
    It should be a question of Highlighting them and using the backspace key and confirming the delete message that pops up.
    Or using the Remove option in the Video menu.
    However there are a couple of quirks that have to be looked into.
    1) Any log in to the same Buddy list either on the same computer is a different App or on a different computer.
    2) Any web Login that may be active.
    2a) Active might be a site that has a delayed "Keep Me Logged in" option if you don't specifically Log out.
    Both Google and AIM have default periods of two weeks which is then kept "alive" if you keep logging in a web browser or using an App on a phone.
    As there is constant communication between the app and the servers the Buddy list is constantly and instantly updated as buddies come on Line or change Status or go Off line.
    Another Login will keep telling the server that "this is my Buddy List" and replace names you are trying to remove.
    Make sure you are logged out of any other login, iPhone app, Web Browser on phone or Mac or another computer.
    10:04 PM      Friday; March 29, 2013
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Motion 5 Share/Export Buttons Greyed out

    Hi, just got Motion 5 on it's own for a project we're doing in FCP7 and for some reason all the "next" or "share" buttons in the export menus are greyed out or disabled. We've messed with a lot of settings but to no avail.
    Is there something I'm missing here? There's nothing written on the Motion product page about requiring Compressor or FCP-X to export and I haven't found anyone else online with this issue.

    So there's nothing I can do to get this fundamental part of the software working? It's pretty stupid if it can't save.
    The only option I have to take this higher is to get Apple Care video and that's $800 for something that appears to be a bug in Motion validating an external framework. From a software design perspective, the only reason that I'd want to grey those buttons is if there were a setting in each dialog that you needed to set before you could export or you were only using a trial version and you wanted to stop people from exporting it or if the dependent framework (e.g. ProApps export manager) wasn't validated in the registry within motion.
    If they throw anything else at me like you need FCPX or Compressor or Lion then that's not right either since they had no mention of that on their website when I purchased it.
    This is just really frustrating!

  • Fix and Fix All buttons greyed out in Analyzed Results List

    The Fix and Fix All buttons are greyed out in the Analyzed Results List. This was working preTiger at least. Perhaps after my initial clean install of 10.4.1. Now running 10.4.3. Things I've tried to no avail:
    Reading the documentation and "Late Breaking News".
    Repaired permissions.
    Repaired disk. (found no problems)
    Ran Disk Warrior (found no problems)
    Trashed SountrackPro prefs file.
    Tried several existing and three new Audio File Projects on the internal and an external firewire drive.
    Searched for a similar topic in this forum.
    TIA for any help, Ken

    It works for me.
    First you have to select what you want to fix (e.g.
    clicks and pops) then press the analyze button to get
    a list of things to fix.
    Right after the analysis is done, if at least one
    thing was found to fix,you should see the "fix all"
    button not greyed out, but the "Fix" button will be
    greyed out until you actually click on one or more
    of the items in the analysis result list.
    Are you seeing something different from the behavior
    I've described?
    My experience and information is that Soundtrack Pro only finds clipped samples. Have you been able to fix them as well?

Maybe you are looking for