Put in new HD,but can't install osx

A friend gave me an iBook G3 500 MgHz. I want it to coordinate with my iMac G5 to be able to use same Tiger software. I put in 640 MB of Ram, then installed OSX 10.4. Everything OK but the modem was broke and there was not much room on HD. So I bought new 80Gig Toshiba HD and new modem, did the surgery using excellent iFixit instructions and went to reinstall OSX from my cds. The computer works if I start it with OSX installer cd, and the disk utility and System Profiler show the hard drive properly,
BUT WHEN I START THE INSTALLER THE HARD DRIVE DOESN'T SHOW UP AS THE DESTINATION DRIVE,NOTHING SHOWS UP AS A POSSIBLE DESTINATION DRIVE.
DID I MISS A MAJOR STEP TO PREPARE THE COMPUTER FOR A NEW HD? IS THERE SOMETHING I CAN DO WITH DISK UTILITY or some startup keyboard stuff TO MAKE IT SHOW UP?
HELP

YO YO YO Matt, you are the MAN! Don't know why a blank disk needs to be erased but hey, it worked . I almost tried it last night but wasn't sure which format to use. Thanks; OSX is installing.

Similar Messages

Have purchased a new computer but can not install elements 12 since it has been installed on old laptop. Is there a small fee to be able to do this. Never installed the video editing portion, can this be installed with no problem?

Have purchased a new computer but can not install elements 12 since it has been installed on an older laptop. This is a one time user program, is there a code that can be put in or a small fee to pay to be able to use the program again. Never installed the video editing and hoping this can be installed with no problem.

If the laptop is still connected Launch Elements in Expert Mode. Go to the help menu and sign-out. That will deactivate usage on the laptop.

Got new iPhone but can't install iTunes

I purchased a new iPhone 4 yesterday and thought it would be easy to set up but for some reason I can't install iTunes on my laptop. I can down load the iTunes setup.exe but when it comes to install it, it gets about half way through and it comes up with the error 'Could not access network location %APPDATA%/'. Does anyone have any suggestions on how to overcome this problem. Any help would be greatly appreciated. Many thanks, Fifi.

it gets about half way through and it comes up with the error 'Could not access network location %APPDATA%/'.
With that particular variety of 1606 (it's a 1606 error message even though the 1606 error message number isn't returned by the iTunes installer), the following Microsoft document is worth a try:
[You receive an "Error 1606" error message when you try to install or remove a Microsoft program|http://support.microsoft.com/kb/886549]

Installed new hard drive, can't install OSX - help!

I just installed a new 500GB hard drive in my 2008 late model unibody MacBook (not pro). I inserted the original OSX install disk (snow leopard, I think), but the disk isn't recognized. The screens white, with a blinking gray folder icon with a question mark on it. And now I can't get it to eject the disk either. Help! What do I do?

As Snow Leopard wasn't released until August 28, 2009, you must use the white Snow Leopard retail disc with the image of a Snow Leopard as shown on this tip, and it does not say Upgrade, Dropin, or OEM, or a Mac model on if you are going to use it on the MacBook. Note: That installer disc only contains iTunes and no other components of iLife. For iLife, you must find the original 10.5 installer disc that came with the machine, or a retail physical copy of iLife, or update the machine to 10.6.6 and buy iLife from the App Store. iLife from the App Store does not contain iDVD.
The installer once booted will give you Utilities you can use from the installer menus, including Disk Utility to format and partition (see bottom of tip to determine which Disk Utility instructions pertain to you) the hard drive HFS+ GUID (this erases the drive). If you need Boot Camp, request help from this forum.
Upgrading to 10.7 or later, be aware Rosetta no longer exists, and what that means.

My new iPad mini can't install apps - I have updated to IOS 7.1.2 - I note that one possible solution is to reset all under settings General but I don't see "reset" - please help

My new iPad mini can't install apps - I have updated to IOS 7.1.2 - I note that one possible solution is to reset all under settings>General but I don't see "reset" - please help

1. Try reset iPad
Hold the Sleep/Wake and Home button down together until you see the Apple Logo.
2. Sign out and sign back in to iTunes and App Store
Settings>iTunes and App Store>Apple ID>Sign out and sign in

I have a brand new Macbook Air with latest Mountain Lion but can't install Adobe Flash Player it continually times out?

I have latest version of Mountain Lion on brand new MacBook Air but can't install Adobe Flash Player from Adobe website as it always times out with error message...?

OK...I have tried to download from:
get.adobe.com/flashplayer/
It tells me that the Adobe Flash Player is version 11.5.502.146
Intel based Macs
Browser: Safari, Firefox, Opera
I click Download now (I don't have any antivirus software running or a firewall)
The screen then changes to say:
Thankyou your download will commence immediately...
Then I get a nes screen with message:
Request Timeout
The server timed out while waiting for the browser's request.
Reference #2.c29aef50.1359298991.0
I have also tried installing a differnt version by clicking on the "Different operating system or browser?'' and
selecting
Mac OS X 10.6 - 10.8
Flash Player 11 for Mac OS X 10.6 - 10.8
The same thing then happens...Thank you. Your download will start immediately...then about 20 secs later
Request Timeout.
Reference #2.c29aef50.1359299497.0
That's as much as I know...

HT204053 I have 2 itunes accounts that I want to put on one iCloud, but can't get them to sync. What can I do that the instructions aren't telling me?

I have 2 itunes accounts that I want to put on one iCloud, but can't get them to sync. What can I do that the instructions aren't telling me?

You don't mention anything about the music files on your computer that were used to copy into iTunes. If you have moved those files to a different location on you PC you will get that error message from iTunes. This is because iTunes will look for the music files in the original location that they came from on your PC when they were copied. If this is the case you have to tell iTunes to look in the new location for the music files or move the music files back to the original location.

After installing a new hard drive can I install snow leopard directly from snow leopard disc

After installing a new hard drive can I install snow leopard directly from snow leopard disc. Or do I have to install previous versions first. iMac 7.1 (2007) 2.8ghz

You can install directly, assuming the disk is newer than your computer and not designed for a different Mac, but doing so won't install iLife.
(64305)

Purchased Mountain Lion, but can't install on Mavericks OS...Paid for but Can't install

Purchased Mountain Lion, but can't install on Mavericks OS...Paid for but Can't install

You can't install an older OS over a newer one. So you'll get a message saying you can't install ML until you erase the drive.
I'm presuming you already have the full Mountain Lion installer on your drive.
Download DiskMaker X. Use it, the ML installer, and an 8 GB flash drive to create your own bootable ML installer. Boot to the flash drive when it's ready. From there, you'll get the same minimal work screen as when you boot into Recovery Mode. Use Disk Utility to erase the drive, then install Mountain Lion. Restore your personal data.

Cannot send emails from my new ipad but can receive them. iPhone 5 ok. Both iOS 6

Can't send emails from my new ipad but can receive them. I've checked the settings and username and password are setup correctly. My email account is with tiscali. My iPhone 5 is setup the same but works ok.

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

I have the same problem, MSVCR80.dll, I uninstalled, but can't "install", get message "Service "Apple Mobile Device" failed to start. Verify that you have sufficient priveges to start services. Nothing works? HELP !!!

I have the same problem, MSVCR80.dll. I "uninstalled", but can't "install" , get error message "Service "apple mobile device" failed to start. Verify that you have privleges to start service. No option works. HELP !!!! I'm NOT a computer geek !

Follow the instructions of tt2 in https://discussions.apple.com/thread/5822086 and note especially to run as admin.

In Aperture 3, how can I easily move entire projects out of my main Ap Library into other libraries? My Ap library is running super slow because it's overloaded l so I have created two new libraries, but can't seem to move the projects into them

In Aperture 3, how can I easily move entire projects out of my main Ap Library into other libraries? My Ap library is running super slow because it's overloaded, so I have created two new libraries, but can't seem to move the projects into them?

Hello Annabel,
To move entire projects export them as Aperture Libraries, and then import those Libraries into the other Aperture Library:
Select the Project in the Inspector, then
File -> Export -> Project as Library
In the other Library do:
File -> Import -> Library/ Project
But I am not quite convinced, that the size of your current Aperture Library is responsible for the slowness of Aperture - Aperture is designed to cope with huge libraries.
You may want to post your hardware setup and details of your library, and some of the hardware experts here may help you to find the reason for the slowness.
A huge library should only be a problem, if the projects are too big, and if you have many, many smart albums at the root level of your library.
So keep the projects small, and try to move some of your smart albums to lower levels in your folder structure (then Aperture does not need to scan all of your images to build the smart album).
Other reasons for Aperture's slowness may be, e.g.
An overfull system drive and/or external drive (keep at least 20% of your drives empty)
lack of RAM
a corrupted Aperture Library, that needs repairing
Have you checked those options, before you split your library? It would be a pity to split it, for you would loose the ability to browse all parts at the same time, to use all your images in the Media Browser, etc.
Regards
Léonie

Running iTunes 10.7 on Mac OS X 10.8. Downloaded but can't install iTunes 11.0.2. Why not, can I

Running iTunes 10.7 on Mac OS X 10.8.2. Downloaded but can't install iTunes 11.0.2. Why not, how can I & should I?

Welcome to the Apple Support Communities
The latest iTunes version is 11.0.1 version. 11.0.2 does not exist. Have you tried opening Apple menu > Software Update and install iTunes 11.0.1? If it doesn't show up, you have already iTunes 11.0.1

I downloaded a new APP to my iPhone it appears on my screen but can't get it to appear on my wife's iPhone screen. Her screens were initially full of Apps, I later made room for the new APP but can't get it to appear even after making room for the new A

I downloaded a new APP to my iPhone it appears on my screen but can't get it to appear on my wife's iPhone screen. Her screens were initially full of Apps, I later made room for the new APP but can't get it to appear even after making room for the new APp. It can be opened, but I want the APP to be on her iPhone screen as well as on mine. Help, please.

Is the app downloaded on her phone also?

HT204400 I turn my Apple TV on and it stays on the setting time anWoke d date scroeen. I've tried the menu button nothing happens except the light flashes about 3 times. I'm trying to connect it to my new wifi but can't cause it won't go on the menu. Gutt

My Apple TV won't go on the menu page it stays on the time and date screen.every time I press the menu button the light flashes 3 times. Been trying to connect my new wifi but can't cause it won't get of that screen. I've treys turning it off and one still no joy. Gutted. Heip

My Apple TV won't go on the menu page it stays on the time and date screen.every time I press the menu button the light flashes 3 times. Been trying to connect my new wifi but can't cause it won't get of that screen. I've treys turning it off and one still no joy. Gutted. Heip

Put in new HD,but can't install osx

Similar Messages

Maybe you are looking for