Putaway in storage section 100 is not allowed

hi,
I am facing a problem
while creatin a TO i am getting an error Putaway in storage section 100 is not allowed
All the strategy for the patricular storage type and the storage section is maintained in the config.
Thanks in Advance
Sunil

your target storage bin has a storage section 100 assigned.
your material master has a storage section indicator.
In OMLZ (storage section search) find the record for your warehouse and storage type having the storage section indicator from your material master, and check into what storage sections (below 1..., 2...., 3,,,) you can putaway the stock.

Similar Messages

Putaway in storage section PA1 is not allowed

Hello,
While creating TO against TR in LT04 system is giving error message as above said in subject line.
I have checked in LX20 and LS04 bins are there even though still getting same error.
Please let me know what could be the reasion and solution for this issue.
Thanks in advance.

you get this error if the storage section check is made active in customizing transaction OMLZ
here you first define one or more storage section indicators (also named storage area indicator).
then you define a storage section search per combination of warehouse and storage type and storage section indicators and assign the possible storage section for this combination.
in the storage bins (LS01N) you enter the storage section to which this bin belongs.
in the material master you enter the storage section indicator
if a bin is determined which has a storage section that is not among the listed storage sections from the storage section search then the error you have is issued.

Error states ''Putaway in storage section SSA is not allowed''.

Edited by: Sunny on Sep 11, 2008 10:26 AM

Hi
You need to check that you have the correct strategies set up for storage sections and for storage bins and for storage unit types that they are allowed to go where you are trying to put them
Frenchy

Error Addition to stock of material A in storage type 002 is not allowed

Dear all,
I am doing GR for PO in WM. During TO creation I am getting this error Addition to stock of material A in storage type 002 is not allowed. Hence no storage bins can be entered. May I know under what scenarios this type error props up?
Thanks in advance,
Prashanth

Please find the explanation in SAP online help:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/c6/f8449d4afa11d182b90000e829fbfe/frameset.htm
SPRO > LE > WM > Master Data > Define Storage Type
Check
- putaway strategy --> V_T3010-STEIN
- addition to existing stock indicastor ---> V_T3010-ZULAG
As you can read in the help, other factoers such as capacity may influence this.
Regards,
Csaba
Edited by: Csaba Szommer on Feb 19, 2010 7:55 AM

My credit card expired and I need to update my information to paper my iCloud storage but it's not allowing me to do so.

Can someone tell me how I can update my credit card information and get my iCloud paid for? Currently none of the information is going through.

Read here: http://support.apple.com/kb/ht1918.

Storage section not allowed

I was trying to create a TO with LT01 and mvt type 999.
Its giving an error - 'Putaway in storage section 'A' is not allowed.
It is not allowing to delete these storage sections. I have only 2 storage sections for this storage type.
1.Why this error is coming?
2.What controls this?
Please explain.

SPRO>Logistics Execution>Warehouse Management>Strategies>Putaway Strategy>Define Strategy for XXXXXBins>Click on any of the entries(the bins and data u r working on) and click on the glass symbl...then you will the indicator for Addn Stock....
If you also go through the below, check there as well...
SPRO>Logistics Execution>Warehouse Management>Define Storage Types>Click on any of the entries(the bins and data u r working on) and click on the glass symbl...then you will the indicator for Addn Stock....

New Storage Section set up in WM

I had to set up some new bins in a new storage section, within an existing storage type in our warehouse. I thought I had configured everything, but when we attempt to transfer batches from the old bin that is being retired to the new one, we get an error message stating: Putaway in Storage Section XX is not allowed.
I did configure it in the storage section search, and am wondering what else I missed. I couldn't find any other strategy configuration that listed specific storage sections. What am I missing?

Jurgen,
thanks, I really owe you, this was the second question of mine you've answered this week. My error was that I had linked the new section to the section that the inventory is currently in. I had to link it to the one indecated on Material Master, and it worked fine. You rock!!!

Error in storage section (LT09) - WM

Hi to you all,
We were using tc LT09 to transfer a storage unit from one
position to another.
When determening the destination storage bin, system does not
recognize the correct destination storage section (we've
check if the storage section is correct and everything is
ok), the following error occurs: L3 038 - Putaway in storage
section 001 is not allowed.
The problem is that system does not recognize the storage
section (322) and goes to the default one (001).
If we try to do the exactly same movement in LT01 everything
works out fine.
Can you please help us with this problem?
Thanks in advanced for your help.
Best regards,
Marisa S.

charlie thanks for your answer, but i've already done that.
Storage section is allowed. In storage bin search log i get this:
Storage bin search attempt 1
Required qty... 5,000 CRT
St.unit type... E1
Determ.of source data      Known:
                           Storage type... 000
                           Storage bin.... 0000001247
                           Quant number... 0000001247
Determ.destination data    Known:
                           Storage type... 001
                           Storage area... 322
                           Storage bin.... N-90-01
                           Storage unit... 0000000312
System message L3 038
    Putaway in storage section 001 is not allowed
Do you have any ideia how to solve this?
Thanks.
Best regards,
Marisa S.

Storage Section Settings

Hi Gurus
I put in the customizing of storage type Addition to stock "M" and in the material master I mark the flag for addition to stock this does not work as spected, when I receive a PO with 2 materials on it, they go to 902, then I try to process the posting change notice but I get error no destination storage bin could be found in storage type XXX
These 2 materials have the same storage section, and I have correctly defined a strategy to place accordingly this storage section,
The current putaway is L next empty bin, and if I change to "I" addn to stock then system allows the putaway but just for one materials automatically, with the second one I still get the error but If I manually type the bin of the storage section then It allows putaway too.
Can you explain what needs to be done to allow putaway of stock in a storage type wich is divided into 3 storage sections, 2 of them are assigned to two bins each (2X2=4bins), and the last storage section is linked only to one bin. (Total of 5 bins)
The rare thing here is that in the first 2 storage section that have 2 bins each, I can put material on it only one palled on each bin, if for some reason only half pallet is placed, then no more stock can be placed there, How to check this capacities?
And for last the strategy is that system tries to putaway first in storage section 1, if no empty bin then try in sto section 2, and if no empty bin there, then it should go to storage section 3 (wich has only one bin attached) but I want to make this bin like infinite capacity so if there is no room in the first two storage sections (4 bins) then it will go to the las storage section wich can allow addition to stock and mix storage.
Please your inputs will be really appreciated on what atrategy and capacity cetting need to be done on customizing and material master of material to achieve this.
Regards

Julio,
Better late than never...Here are the other capacity check methods:
Check 2:
=======
o SUT check must be active - if not, then config for SUT assignments to ST will not be used
o For the material no specific capacity data needs to be entered
o For the bin no specific capacity data needs to be entered
o Example:
             u2022     Material:          1234
             u2022     Liters per CAS:     4.800
             u2022     ST/Bin:          112/112-01-01
             u2022     Max Bin Weight:     1,500Kg
             u2022     Total Capacity:     3,000
             u2022     Stock to be placed (Weight):     907.200L = 2,721.600Kg (1L = 3Kg)
             u2022     Transaction SUT:     T1
             u2022     Allowed SUT for ST:     C1
o The system stops the transaction for the transaction SUT is not valid according the SUT allowed per Storage Type configuration. Message: Storage Unit Type is not allowed for ST112.
Check 3:
========
o The material must be created for the specific ST (WM2 masterdata view) and the maximum bin qty needs to be speicfied.
o For the bin no specific capacity data needs to be entered
o Example:
            u2022     Material:          3344
            u2022     Liters per CAS:     4.800
            u2022     ST/Bin:          113/113-01-01
            u2022     Max Bin Weight:     1,500Kg
            u2022     Max Bin Qty:                           750L
            u2022     Total Capacity:     0
            u2022     Stock to be placed (Weight):     768L = 2,304.000Kg (1L = 3.000Kg)
o The following checks were done:
            u2022     Bin Quantity Check
            u2022     The maximum bin qty was set to 750L (Base UoM)
            u2022     The quantity of the product to be placed was 768L ( = 2,304.000Kg). This qty is more than the maximum bin quantity which is 750L (Base UoM), so according to the quantity the product may not be placed in the bin. Message: Maximum qty for storage bin 113-01-01 will be exceeded by 3.750CAS.
o Note from the above that the error message is expressed on the putaway quantity and not the capacity quantity.
o Note: No weight and volume checks are done (see the weight of transaction > bin maximum weight)
Check 5:
========
o Additional config: SPRO  Logistics Execution  Warehouse Management  Master Data  Material  Define Storage Unit Types - Specify the capacity for the SUT
o For the material no specific capacity data needs to be entered
o For the bin the Total Capacity field must be filled
o Example:
            u2022     Material:          5678
            u2022     Liters per CAS:     4.800
            u2022      ST/Bin:          114/114-01-01
            u2022     Max Bin Weight:     1,500Kg
            u2022     Total Bin Capacity:     3.000
            u2022     Total SUT Capacity:     5.000
            u2022     Stock to be placed (Weight):     907.200L = 2,721.600Kg (1L = 3.000Kg)
o The following checks were done:
            u2022     Capacity Check according to SUT Capacity:
            u2022     The capacity of the SUT used is 5.000
            u2022     The capacity limit for the bin is 3.000
            u2022     The error message is displayed stating that the placement capacity is more than the allowed (maximum) capacity:
5.000- 3.000 = 2.000 (Message: Storage Unit Type C1 exceeds remaining capacity by 2.000)
o Note that no check according weight was done. The transaction weight was 2,721.600kg vs the maximum bin weight of 1,500.000kg
o Note from the above that the error message is expressed on the putaway quantity (SUT capacity used) and not the capacity quantity.
Check 6:
========
o Additional config: SPRO  Logistics Execution  Warehouse Management  Master Data  Material  Define Storage Unit Types - Specify the capacity for the SUT
o For the material enter a capacity value (WM1 view)
o For the bin enter a capacity value
o Example:
             u2022     Material:          1007
             u2022     Liters per CAS:     4.800
             u2022     ST/Bin:          115/115-01-01
             u2022     Max Bin Weight:     1,500Kg
             u2022     Material Capacity per BUoM:     1.000
             u2022     Total Bin Capacity:     800.000
             u2022     Total SUT Capacity:     5.000
             u2022     Stock to be placed (Capacity):     907.200L + 5.000 = 912.200
             u2022     Stock to be placed (Weight):     907.200L = 2,721.600Kg (1L = 3.000Kg)
The following checks were done:
             u2022     Capacity Check according to SUT Capacity:
             u2022     The capacity of the SUT used is 5.000
             u2022     The capacity limit for the bin is 800.000
             u2022     The error message is displayed stating that the placement capacity is more than the allowed (maximum) capacity: 912.200 - 800.000 = 112.2000 (112.200 / 4.800 = 23.375CAS). Message: Maximum qty for storage bin 115-01-01 will be exceeded by 23.375CAS.
o Note that no check according weight was done. The transaction weight was 2,721.600kg vs the maximum bin weight of 1,500.000kg.
o Note from the above that the error message is expressed on the putaway quantity (SUT capacity used) and not the capacity quantity.
======================================================================================================
There you go (I hope I've got all the detail down).
Cheers,
Hein
Edited by: Hein Botha on Mar 23, 2011 11:18 PM

Override the storage section check for manual entries

Hi All,
I am facing a issue on Storage section search.While creating To system is giving correct Storage section according t the settings but if I would like to change the storage section to different storage section system is not giving any error message.It is giving only warning message check your enteries.
So I would like know is there is config settings to avoid another storage section selcetion which are not assignned storage search indicator.
I have checked in help.sap.com .I following information .
To set up the strategy for storage sections, see the section on activating storage section searches under Strategies in the Warehouse Management IMG documentation.
If storage section checking is active for the storage type, then the system searches in the storage type only for those empty storage bins in storage sections that have been allowed for the material being put away. When you are creating a transfer order and manually enter a storage bin, then the system checks whether the bin is in a storage section that is allowed for the material.
*You can also make an entry in customizing that permits you to override the section check for manual entries.*_
Can please advice me inorder activate the config for override the section check for manual entries or any warning message.
Thanks & regards,
Srikanth

HI,
Thanks for your reply.
I want Error message.
Regards,
Srikanth P

My iPad is frozen with the message not enough storage. Options are close and settings but it will not respond to buttons and will not allow me to turn it completely off. How do I get past that message?

My iPad is frozen with the message not enough storage. Options are close and settings but it will not respond to buttons and will not allow me to turn it completely off. How do I get past that message?

Delete some apps, files, photos, videos, movies, etc to free up some space.
How much space is your Other using? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
 Cheers, Tom

HT4847 I have been trying to pay £7.99 for my icloud storage but the online would not allow me to enter new card details as the one you have has expired ?

I have been trying to pay £7.99 for my icloud storage upgrade but the online would not allow me to enter new debit card details as the one you have has expired ?
How can I entre new card details to do so?

You have to change the card in the 'Account' section of the iTunes Store, in 'Payment details'.

Putaway Strategy I, not allowing second material with different batch

Hi all,
Can someone please help me to understand where is the problem
My config is
Strg Typ 401
Putaway Strategy I
Capacity check - 4
Mixed storage: X
Addition to existing stock: X
Storage section check -active
Storage bin created for the storage section in the storage type 401
Maximum capacity maintained in Storage bin
In material master WM view 1- maintained capacity.
When system is correctly finding Bin for First material / Batch combination
But when I am trying to create TO for same material with different batch it does not find storage bin - even the storage bin capacity is still remaining
Also it is not accepting second material in same bin.
The only requirement to have startegy I is that same materials can be placed in same Bins (sorry but dont need fixed bin)
Thanks

Hi Hiren,
You are correct I forgot to mention that in my earlier reply. Actually with out storage unit you can store only one quant in a Bin. So it can add stock to the same quant if we use addition to existing sock feature. If the material batch combination changes it cannot use the same quant, so it wont be able to add the stock to existing quant. If a new quant is to be stored in the same BIN it has to be storage unit managed. To in nutshell multi material multi batch your scenario can be achieved with storage unit managed storage type.
For storage unit setup you can refer below link.
Storage Unit Management - Warehouse Management System (WMS) - SAP Library
If you find this useful please close the tread.
Regards
Abhishek

HT4972 i just purchased more storage for my iphone 4 and also deleted some apps and it still will not allow me to update to ios7

i just purchased more storage and deleted some apps and my iphone4 and it still will not allow me to update to ios7

The iCloud storage is meant for your backup, you do not get more space on iPhone.
You can by connecting to computer iTunes for update then you will not have space problem

I have an iPod 4s and I am trying to update to IOS 6.1.6. I keep trying to download but it will not allow me to click download and install. I have checked my storage and I have more than enough storage space available. Do you guys have any suggestions?

I have an iPod 4s and I am trying to update to IOS 6.1.6. I keep trying to download but it will not allow me to click download and install. I have checked my storage and I have more than enough storage space available. Do you guys have any suggestions?

The only available, signed, iOS, for your iPod, is iOS 7.1. That's why you can't install iOS 6.1.6.

Putaway in storage section 100 is not allowed

Similar Messages

Maybe you are looking for