Putaway Strategy I, not allowing second material with different batch

Hi all,
Can someone please help me to understand where is the problem
My config is
Strg Typ 401
Putaway Strategy I
Capacity check - 4
Mixed storage: X
Addition to existing stock: X
Storage section check -active
Storage bin created for the storage section in the storage type 401
Maximum capacity maintained in Storage bin
In material master WM view 1- maintained capacity.
When system is correctly finding Bin for First material / Batch combination
But when I am trying to create TO for same material with different batch it does not find storage bin - even the storage bin capacity is still remaining
Also it is not accepting second material in same bin.
The only requirement to have startegy I is that same materials can be placed in same Bins (sorry but dont need fixed bin)
Thanks

Hi Hiren,
You are correct I forgot to mention that in my earlier reply. Actually with out storage unit you can store only one quant in a Bin. So it can add stock to the same quant if we use addition to existing sock feature. If the material batch combination changes it cannot use the same quant, so it wont be able to add the stock to existing quant. If a new quant is to be stored in the same BIN it has to be storage unit managed. To in nutshell multi material multi batch your scenario can be achieved with storage unit managed storage type.
For storage unit setup you can refer below link.
Storage Unit Management - Warehouse Management System (WMS) - SAP Library
If you find this useful please close the tread.
Regards
Abhishek

Similar Messages

  • Putaway in Warehouse to Bin with same material but different batch

    Hi Everyone,
    I'd appreciate some help on this as I'm a bit perplexed.
    When a Goods Receipt (MIGO) is being done we have a problem with the Stock not going to the correct Storage Bin. Basically we require to find a storage bin with the same material and add the receipted material to the storage bin.
    However the system will not let us do this becuae the batch for the material is different and the system doesnt put the material away into the desired storage bin. Instead the system puts the material in Storage Type 902 with the PO number as the Storage Bin.
    The functional consultant has asked me to implement a user exit to search for a storage bin with the same material as is being Goods Receipted and put the material in this bin. I have a problem with this becuase there is no TO being created once the MIGO is done so I dont know where to start on this problem.
    To illustrate 
    1. Migo is done on Material 1234
    2. A user exit should search for a bin already containing Material 1234 (ignoring batch) and add this receipted material to the bin.
    Is this possible ??
    Any help or suggestions is greatly appreciated. Thank you very your time.
    Kind Regards
    DK

    HI,
    I hope system will allow to store same material with different batch numbers in the same Bin.
    System will treat it as separate quants in the Bin since Batch no: is different.
    In this case you can try with Putaway strategy - I - addition to existing stock itself.
    If you face any issue regarding Auto-TO creation, check the below link.
    [http://help.sap.com/saphelp_47x200/helpdata/en/c6/f85c504afa11d182b90000e829fbfe/frameset.htm]
    Also try to do a manual TO creation with reference to the TR in the above case in Simulation system so that you will be able to know the exact reason for the error.
    Thanks & Regards,

  • Not allow any application with ip address login to db

    Dear sir,
    Is there any way to not allow any application with ip address login to db?
    such as not allow from client with ip 192.168.5.xxx and toad .
    db version 9.2.0.8
    os solaris 9, 64 bit
    Thanks for advance
    Chara

    Not sure if there is really a reliable way to restrict Oracle connection based on application name: see following thread:
    Denying login via all applications to oracle-server

  • Costing is not allowed for material/PPS status - Message no. CK 399

    Hi Experts,
    I am getting the following error when doing a costing run via CK11N:
    Costing is not allowed for material/PPS status
    Message no. CK 399
    Diagnosis
    Material XXXXXX in plant XXXX has material status Y1. The setting for this status is such that costing cannot be carried out.
    Procedure
    Check the material status in the costing view and MRP 1 view in the master data record of material XXXXXX in plant XXXX (Field MAT/PPS status)
    I have already checked the status of the material in both costing and MRP 1 view via MM03. Plant-Specific Material Status is Y2 (Material productive). I am not sure if the statuses are standard but I hope anyone can advice on the solution if you have encountered this one already.
    Thanks,
    Josef

    Hi Josef,
    Please go to OMS4 and check the material plant specific status for Y1 and Y2 for Mat. Cost Estimate Procedure.
    Also check components of BOM for plant specific status it should be Y2 for all you components.
    One of the materials to be costed has a material/PPS status which does not allow a cost estimate.
    CS03 you can check the BOM components and CS12 for multiple BOM explosion.
    Regards,
    R.Brahmankar

  • HT1386 I bought a new computer and I cannot transfer my library to this new one. The message says that I'm not allowed to sync with two computers??? How can I delete the previous from my account???

    I bought a new computer and I cannot transfer my library to this new one. The message says that I'm not allowed to sync with two computers??? How can I delete the previous one from my account???

    You cannot transfer from the iPhone to the computer.
    You must move the contents of your old computer to the new one directly.
    Use an external hard drive perhaps or restore your old computer backup to your new computer.
    The iPhone is not the source of your data, that is the computer, the iPhone is only a slave device to iTunes.

  • Rules are not allowed for jobs with set 'archive edited messages only' flag.

    Hi,
    We are on AEX 7.4 and have enabled user defined search and also setup archiving. Even though the retention period has expired but still the messages are not being
    archived.
    We see following issues:
    1. Unable to setup archiving rule in Runtime Work Bench, we are getting following error:
    Rules are not allowed for jobs with set 'archive edited messages only flag.
    2. Unable to set the expiration of messages using the following link.Each time we specify the number days it shows the same number of
    messages expired.
    http://XXXXX:50000/MessagingSystem/job/reorgdb.jsp
    3. However if we click on "remove messages" button the messages are getting deleted which tells me that the messages are not matching any
    archiving rule hence are being removed.
    Any pointers to the above issue are appreciated!!!
    Thanks,
    Rajeev

    Hi,
    Please check the [link|http://www.****************/Tutorials/XI/Archiving/Index.htm]
    Also check this
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/402fae48-0601-0010-3088-85c46a236f50?quicklink=index&overridelayout=true
    http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=147266890
    Regards,
    Naveen.

  • Tcode MB1B (Transfer Postings) material with different Valuation class

    Hi,
    is it possible to avoide tcoce MB1B for material with different valuation class?
    Materia1 (001000) has valuation class: 3000
    Materia2 (300000) has valuation class: 7900
    I don't want allowed MB1B with Material1 (3000) to Material2 (7900).
    Thanks.
    regards, Dieter

    Hi,
    Yes, It is possible to avoide tcoce MB1B for material with different valuation class.
    Regards
    Md.MahaboobKhan

  • Same  Material with different itemcatagory groups

    We have 3rd party manufacturers that make product for company and sometimes they send the finished product back to company and other times they will drop ship it to one of our customers.
    this scenario we need to have the same material with different itemcatagory groups
    i tried to create same material with different storage locations, but it's possible but the thing is when i change the item catagory group for the material , the same is applicable for 2nd same material, my requirement is i need 2 different itemcatagory for the same material,  hope u understand my requirement
    i will be expecting your possible replys.
    Thanks & Regards
    Venkat.Dhanemkula

    Hi Venkat..
    Please explain it more clear manner..
    With whatever i have understand, i think you scenerio is manual 3rd party order processing.
    In that case the material that you normally deliver yourself but occasionally need to order from a third-party vendor, you can overwrite the item category during sales order processing.
    Keep only one material and specify the item category group NORM in the material master.
    If, as an exception, you use a third-party material, change the entry TAN to TAS in the ItCa field when processing the sales document. The item is then processed as third-party item.
    hope it helps you.
    Regards
    Harry

  • Why Apple do not allow Bluetooth sharing between different devices even when I want to share something between apple devices I have to make sure that we have the same application

    Why Apple do not allow Bluetooth sharing between different devices even when I want to share something between apple devices I have to make sure that we have the same application

    We are users just like you and would not know why Apple makes teh decisions that they do , nor are we allowed to speculate about it here.
    From the terms of use:
    do not add Submissions about nontechnical topics, including:
    Discussions of Apple policies or procedures or speculation on Apple decisions."

  • Changes not allowed in material type

    hi all
    i have 1 material & for this material is trading good but due to mistake i have created this material with material type FERT.but if i am going to change material type HAWA instead of this material type FERT system not allowed.showing error Purchse order is in process.how can i delete purchase order if already GR & GI happen for some material.what is sort closed.if i do sort closeed can i change material type.please suggest me.
    regards
    ajit

    Dear,
    To dlete PO which is in process for GR and GI has happened.....
    Go to Tcode MIGO........Select Cancellation option....and enter the GR and GI document and save it..It will cancell the document...
    Now go to ME22N and select the line item for that material ...and click on delete button and save,
    Now try to change Material type in Tcode MMAM..
    Regards
    Utsav

  • "Content is not allowed in prolog" with SOAP Attachment

    I'm writing an application using SAAJ that sends a soap message to a servlet which responds with some information, including HTML which the client application will display. The HTML has to go into a SOAP attachment so the tags won't get confused with XML.
    I had the whole thing working with plain text sending within a normal node, and I only switched a few lines to make that text an attachment with HTML instead, but now I'm getting the exception "Content is not allowed in prolog" on the Client side when it tries to create the envelope from the SOAPMessage.
    Code for building answering SOAPMessage with attachment (Servlet to Client)
         public static SOAPMessage buildXML(Message newMessage){
              SOAPMessage msg = null;
              try {
                   MessageFactory msgFactory = MessageFactory.newInstance();
                   msg = msgFactory.createMessage();
                   // Create an envelope in the message
                   SOAPEnvelope envelope = msg.getSOAPPart().getEnvelope();
                   msg.setProperty(SOAPMessage.WRITE_XML_DECLARATION, "true");
                   msg.setProperty(SOAPMessage.CHARACTER_SET_ENCODING, "UTF-8");
                   //Get hold of the the body
                   SOAPBody body = envelope.getBody();
                   SOAPElement soap_message = body.addChildElement("MESSAGE");
                   if (newMessage.message_type != null){
                        SOAPElement soap_message_type = soap_message.addChildElement("MESSAGETYPE");
                        soap_message_type.addTextNode(newMessage.message_type);
                   if (newMessage.questionID != 0){
                        SOAPElement soap_questionID = soap_message.addChildElement("QUESTIONID");
                        soap_questionID.addTextNode("" + newMessage.questionID);
                   if (newMessage.username != null){
                        SOAPElement soap_username = soap_message.addChildElement("USERNAME");
                        soap_username.addTextNode(newMessage.username);
                   if (newMessage.password != null){
                        SOAPElement soap_password = soap_message.addChildElement("PASSWORD");
                        soap_password.addTextNode(newMessage.password);
                   if (newMessage.message_text != null){
                        AttachmentPart soap_message_text = msg.createAttachmentPart("<html><body>" + newMessage.message_text + "</body></html>", "text/html");
                        soap_message_text.setContentId("MESSAGETEXT");
                        msg.addAttachmentPart(soap_message_text);
                        //SOAPElement soap_message_text = soap_message.addChildElement("MESSAGETEXT");
                        //soap_message_text.addTextNode(newMessage.message_text);
                   if (newMessage.sampleString != null){
                        SOAPElement soap_password = soap_message.addChildElement("SAMPLESTRING");
                        soap_password.addTextNode(newMessage.sampleString);
                   SOAPElement tmpEl;
                   for (int i=0; i<newMessage.numArrayUsed; i++){
                        tmpEl = soap_message.addChildElement("SAMPLEINT");
                        tmpEl.addTextNode("" + newMessage.sampleInt);
                   msg.saveChanges();
              } catch (Exception e) {
                   e.printStackTrace();
              return msg;
    You can see in the area where it adds MESSAGETEXT there are two clients commented out which work. The three lines above it are what changed to make it an attachment instead.
    Code in Client for recieving reply from Servlet
    SOAPMessage reply = connection.call(soap_msg, endpoint);
    System.out.println("\nReceived reply from: " + endpoint);
    reply.writeTo(System.out);
    System.out.println("");
    reply_msg = ProcessXML.parse(reply);This is the console output:
    Edit: These forums seem to be inserting an extra > before the <?xml version="1.0" encoding="UTF-8"?> line, but it doesn't exist in the code I'm pasting
    Received reply from: http://localhost:8080/kuj/CaseStudyServlet
    ------=_Part_2_371807.1137465625031
    Content-Type: text/xml; charset=UTF-8
    <?xml version="1.0" encoding="UTF-8"?><SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"><SOAP-ENV:Header/><SOAP-ENV:Body><MESSAGE><MESSAGETYPE>deliverquestion</MESSAGETYPE><QUESTIONID>1</QUESTIONID><USERNAME>zac</USERNAME></MESSAGE></SOAP-ENV:Body></SOAP-ENV:Envelope>
    ------=_Part_2_371807.1137465625031
    Content-Type: text/html
    Content-Id: MESSAGETEXT
    <html><body>This is an Array sort Question. You will be given 10 random integers and you must sort and return them in the order of greatest to least.</body></html>
    ------=_Part_2_371807.1137465625031--
    ERROR:  'Content is not allowed in prolog.'
    17-Jan-2006 02:40:25 com.sun.xml.messaging.saaj.soap.EnvelopeFactory createEnvelope
    SEVERE: SAAJ0511: Unable to create envelope from given source
    com.sun.xml.messaging.saaj.SOAPExceptionImpl: Unable to create envelope from given source:
         at com.sun.xml.messaging.saaj.soap.EnvelopeFactory.createEnvelope(EnvelopeFactory.java:111)
         at com.sun.xml.messaging.saaj.soap.ver1_1.SOAPPart1_1Impl.createEnvelopeFromSource(SOAPPart1_1Impl.java:39)
         at com.sun.xml.messaging.saaj.soap.SOAPPartImpl.getEnvelope(SOAPPartImpl.java:98)
         at com.zacwittedesign.xml.ProcessXML.realParse(ProcessXML.java:32)
         at com.zacwittedesign.xml.ProcessXML.parse(ProcessXML.java:26)
    (snip)And this is the beginning of the code for extracting the info from the SOAPMessage on the Client side:
    private static Message realParse(SOAPMessage msg){
              Message newMessage = new Message();
              try {
                   SOAPEnvelope envelope = msg.getSOAPPart().getEnvelope();
                   SOAPBody body = envelope.getBody();
    (snip)It dies on SOAPEnvelope envelope = msg.getSOAPPart().getEnvelope();
    Does anyone know what I'm doing wrong?

    I suppose I should also include the bit where the Servlet actually SENDs the resulting SOAPMessage
    SOAPMessage msg = ProcessXML.buildXML(outMessage);
    // try to send it
    try {
         response.setContentType("text/xml");
         msg.writeTo(response.getOutputStream());

  • How to resolve Content not allowed in prolog with PDF files

    We are using PI 7.1 to read a file and using ASMA get the file name and pass it to a target mapping and call a web service with the file name.
    We have a scenario that reads a PDF file as Binary form a folder.  Our mapper uses ASMA to get the file name and folder of the
    file to map to the target.
    Testing in mapper works fine except for the ASMA does not function (known issue).
    At runtime we drop a file and it is picked up as expected BUT from SXMB_MONI we see the following:
    Runtime exception occurred during application mapping com/sap/xi/tf/_MM_FileNotification_; com.sap.aii.utilxi.misc.api.BaseRuntimeException:Content is not allowed in prolog.
    This error does not happen all the time either.  When it appears it is typically only the first time a file is mapped and on subsequent retries it processes normally.  In dev we have shown that PI seems to get stuck on a few initial files u2013 process properly on the first retry and then at some point has no issues and will process files very fast.
    u201CContent not allowed in prologu201D at least from an XML perspective is related to characters appearing before the xml file declaration:
    <?xml version="1.0".encoding="UTF-8"?>
    If chars appear before this you get this error in Java parsers.  This could be related but we do not have control over how PI parsed the file content and puts into XML messages inside the mapper as we do nothing with the file content.
    The same file will go through randomly with this exception on multiple drops.  Sometimes it gets processed properly and sometime it doesnu2019t u2013 but in dev it u201Calwaysu201D gets processed properly on the automatic retry.  It does not seem to matter what PDF we drop in there either.
    Our tyoes look something like this:
    Source:
    DT_FILE - xsd:hexBinary
    Target:
    FilePath - xsd:String
    I have tried with DT_FILE as xsd:base64Binary with the same results...
    We use a UDF to get the file name from ASMA as follows:
    DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key1 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
    DynamicConfigurationKey key2 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","Directory");
    String ourSourceFileName = conf.get(key1);
    String ourSourceDirName = conf.get(key2);
    //conf.put(key1, ourSourceDirName + "/" + ourSourceFileName);
    return ourSourceDirName + "
    ToProcess
    " + ourSourceFileName;
    Edited by: Carey Bingham on May 26, 2010 12:24 AM

    > Is using a custom adapter module the standard way to handle files when we do not want the content? 
    I would rather say this is a feasible solution
    > If so does anyone have generic code that we can use for the purposes of simply monitoring a file and passing the file name/folder out implemented as modules already?
    The questio is. What do you want to do with this information?
    Here is a sample code written for a specific purpose, you can adapt this to your needs:
    http://wiki.sdn.sap.com/wiki/display/XI/AdapterModulePI7.0SetAttachmentName
    > Is this a known workaround to get around the "content not allowed in prolog" issue?
    At least it is known by me

  • MOPZ - yellow warning does not allow to continue with generation of package

    Hello,
    Using Solution Manager (SM) to generate package and stack configuration
    file for upgrade.
    XXH is an HR, 640, with dual stack due to XSS. In SM, converted the
    product version from ECC to ERP 2004 using SMSY_SWITCH_PRODUCT, there is no inconsistency.
    Edited to add product instances - Portal Content and Enterprise Portal to link to XKP (JAVA system with Adobe Document Services, Application Server Java and  Enterprise Portal. It is now showing in SMSY with the following product instances.
    - SA ECC Server 
    -  Portal content, pointing to another JAVA system XKP
    -  SAP  NW - Entreprise Portal - pointing to XKP also
    -  SAP XSS - pointing to XKP also
    In MOPZ, selected XXH, 'Upgrade with EHP' --> EHP4 on NW701. It shows the following warning
       Attention! Software Component Version ESA ECC-SE 501 is installed!
       Attention! Software Component Version BI CONT 3.53 is installed!
    Then selected several technical usages
    - ESA ECC-SE
    - SAP ECC Server VPack successor
    - Central Applications
    - HCM 
    - Portal Content
    - Portal Content Self Services
    - HCM Self Services
    - Self Services
    However after the calculation it sill show the yellow warning below and
    does not allow to continue, even if I try other technical usages.
      Attention! Software Component Version BI CONT 3.53 is installed!
    Anything missing here?
    Regards,
    Terry

    Hello,
    The document 'How to install EHP4' has the following
    ...' If you are combining the installation of SAP enhancement package 4 with an upgrade, you have to register the system according to the start release.'
    Since it was ECC 5.0 and converted the product version (using SMSY_SWITCH_PRODUCT), it is 'SAP ERP 2004'.
    The MOPZ log below, the first 4 lines are coming out as red
    15:07:30       Attention! Software Component Version BI CONT 3.53 is installed!
    15:07:30       Please check the instructions under the logging tab.
    14:56:36       Please check the instructions under the logging tab.
    14:56:36       Attention! Software Component Version BI CONT 3.53 is installed!
    14:36:53       Attention! Software Component Version BI CONT 3.53 is installed!
    14:36:53       Attention! Software Component Version ESA ECC-SE 501 is installed!
    14:36:53       Product version of system not suitable for Netweaver
    14:36:53       Technical Usage SCM .
    14:36:53       Technical Usage ESA ECC-SE .
    14:36:53       Attention! Software Component Version BI CONT 3.53 is installed!
    14:36:53       Attention! Software Component Version ESA ECC-SE 501 is installed!
    14:36:53       Please check the instructions under the logging tab.
    14:36:10       Component BI CONT 3.53 without suitable Product Instance <--
    The last line could be causing the error, but has not found any way to resolve it in SMSY. Any idea?
    Regards,
    Terry

  • OVi Player does not allow download music with prox...

    Hello,
     i've noticed that OVI Player deos not allow to download music when I am inside the firewall or under a corporate proxy. ANy idea if this is a restriction from Nokia Player or is it specific to my connection ?

    Dear svenks,
    If you scroll down the discussion topics, you will realise many other users are facing music download problem after upgrading from Nokia Music to Ovi Player.
    Same for me, whether I connect my WinXP Prof 32-bit notebk behind my company firewall or at my home's ADSL broadband with Windows Firewall off, antivirus off, http://music.ovi.com set as trusted site, the downloading still fails.
    Per advised by Nokia careline, I have already sent them a log file and now waiting for their investigation.
    I wonder if anyone in the world is currently successful in downloading songs using Ovi Player. If yes, I would really like to know what PC configuration they are running under.
    Richard

  • HT4972 Why 2nd generation IPod Touch is not allowed to update with newer IOS?

    Why 2nd generation ipod touch not allowed to update its OS to IOS 5 or later? This limitation made that IPod more or less useless as updated apps cannot be installed.

    Be sure to backup your current apps.  They can not be downloaded again,  Earlier iOS apps are becoming increasingly difficult to find.  You may want to look at VintApps, new in the Apple app store, that makes this much easier. 
    https://www.facebook.com/VintApps313
    Although there are thousands of available apps to choose from, they will definitively not be the latest greatest.
    I wrote my 99 cent app specifically to help solve this kind of problem.  I need to add that "I may receive some form of compensation, financial or otherwise, from my recommendation or link."

Maybe you are looking for