Putaway Strategy
If my current Putaway Setting on my storage type is "Manual (Blank)" and "Addition to existing stock" is allowed.
The capacity check for the storage type is "Not Activated" .
If I have the same material in 4 bins. In which order bins will be picked.
Please explain. This becomes a crucial step in my design. Thanks in advance and have a nice weekend.
Hi Amar,
Check out the below link.
[http://help.sap.com/saphelp_47x200/helpdata/en/c6/f844764afa11d182b90000e829fbfe/content.htm].
I hope this will provide the answer for your query.
Revert if you need more clarifications.
Regards,
Similar Messages
-
WM and Open storage putaway strategy
Hi,
the following link gives an explanation about Open storage putaway strategy
http://help.sap.com/saphelp_erp2005/helpdata/en/c6/f844694afa11d182b90000e829fbfe/frameset.htm
Strategy C: Open Storage
Use
The system uses this putaway strategy to find the storage bin in an open storage section. Open storage is a type of warehouse organization in which you define a single storage bin for a storage section. The quants in the storage bin can also be in the form of mixed storage.
I think that in this strategy is also possible to define more than a single storage bin for a storage section.....or not?
So why the statement: you define a single storage bin for a storage section.
Best regardsI cannot tell you why it is explained in this way, even the German explanation does not give any hint.
Open storage putaway strategy is the most used in my implementations and I can confirm that you can have hundreds of bins in one storage section. -
SAP WM Putaway strategy - Next empty bin
Hello,
I am testing putaway strategy - L - Next empty bin.
I' ve created 902 - Storage type:
Also i've been activated storage type search and storage section search:
Then i've added this data to material master:
And i also defined movement type- 101 for purchase orders:
Also, special for this, i've created the empty bin:
But when i am trying to post goods receipt in MIGO, i am getting the following error:
Storage bin Z02 does not exist (check your entry)
Message no. L9009
Could you please advise - what is wrong - why i can't post the goods receipt in MIGO?
Thank you in advance.Hello, Jürgen
That's the settings for standard 101 wm mvmt type:
That's setting for my 101 wm mvmt type:
Difference - that i don't want to use dynamic storage bins.
And i still have this error:
Storage bin Z02 902 does not exist (check your entry)
Message no. L9009
Now system defines also storage type, because of i wrote it in the mvmt type, but i still can't understand, why it doesn't find storage bin, according the strategy.
I think, that i 've made all necessary customizing settings and i also have one empty storage bin on this storage type and storage section. -
LT10 "Immediate confirmation" of TO with Putaway strategy "C" Doesn't Work
Hi ,
We have WM with HU implemented for a Plant/ Sloc Combination.In Warehouse we have multiple storage types.
Putaway strategy "C' (Open storage) is implemented with SU in one of the storage type of warehouse.
If we try to make internal movement within this storage type using LT10 with option "Immediate Confirmation" (of TO) , it doesn't work and we have to use LT12 to confirm transfer order seperately.
This is happening only if we are opting QUANT VIEW in LT10.If we use STORAGE UNIT view in LT10 and transfer the material with IMMEDIATE confrimation , TO gets confirmed immediately.
Further , functionality of "Immediate confrimation" works perfectly if we use storage type with other put-away strategy like "NEXT EMPTY BIN"
Need your immediate help on this
Regards
Sandeep MarwhaHi Sandeep,
In open storage , you have only one bin per storage section. You are also having SU. So quant view will not work, thats why Storage unit view is working. Moreover, please check if mixed storage is enabled. If not then it will not allow multiple SU to accomodate. Thats where the Next empty bin will work.
Thanks,
Mono
Edited by: Monodeep Sarker on Dec 28, 2010 8:46 PM -
Addn to stock flag for putaway strategy not working
Hi
It seems that the flag Addn to stock for putaway strategy in the storage type 103 configuration is not working fine as the quantities of the same material with the same batch sent to the same stype 103, and destination bin are not being added. So by running stock report in WM we see several lines with partial quantities instead of only one line with the total quantity in place. Do anybody know how can that be solved? Or what can be the route cause of the issue? Is there any OSS known applicable to fix the problem?
Thx for your help
AlbaHi Guys
Unfortunately I do not think that you will get an answer now. Either your question is not simple or we do not know.
So in the interest of keeping the Forum tidy and easier to surf through could you please close your thread and wither try one of the other forums or try another post. I do not think that mosy people will bother to look this far back anymore.
Sorry I cannot help as I would if I could.
Regards
Frenchy. -
SAP WM: Mixed pallet with putaway strategy "P"
Dear Experts,
I am using putaway strategy P for a storage type and I have given X for Mixed storage field.
I am not able to put multiple batches of same material in one bin, is it possible with putaway strategy P
I am not using SU management.
Thanks in advance,
Amit KumarThis is from a WM colleague:
First it will always look at same bin as a material is stored
with put away strategy “I”.
This scenario is completely wrong, if I understand it right.
He/she needs to look at the bin strategy for the SU types
defined in the LE qty. / SUT types for bin type.
Strategy “I” is for addition to stock like they said.
Capacity check 2 only works if it is SUT active, which they say it is
not. Not the check flag, but the SUT.
The strategy for SUT type allowed to bin type only works if it
is SUT managed, which they say it is not.
The strategy just doesn’t seem right. If they do not use
SU’s, the only capacity check that works is max from the material master (WM-1
view) weight “1”.
The bin type / SUT strategy will not work unless they are using
SUT’s for storage. Not just the LE qty. in the SUT defined.
If they aren’t using SUTs for storage, it is only a quant.
Noting is configurable for strategy of quant to storage bin type. -
Putaway Strategy P - Managing different SU types
Hi gurus,
I'm experiencing the following problem.
Using the putaway strategy Pallet, the system processes different storage unit types and allocates them to the appropriate section, but only the same storage unit types can be placed into a storage bin at one time.
My need is to place at the same time different SU types into a storage bin. Is it possible?
Thank for your help!
FrancescaHi
The storage unit is compatible with the current block when the 'maximum
storage units' which can be stored in the bin are the same. The
'maximum storage units' depends on the storage unit type of the first
storage unit you put it the bin. If the values of T337B-MAXLE are
different then the system will not allow the placement. This is the
is the standard behaviour.
Field LAGP-MAXLE indicates the maximum number of Storage Units that are
allowed to be placed into a bin and this is set during the first
placement into an empty bin in accordance with the block stucture
definition in transaction OMM4.
This does not mean that it is not possible to place different Storage
Unit Types in to the bin. This is possible but only when the block
structure definition in OMM4 has an identical value for the maximum
number of storage units in the block (T337B-MAXLE). If one has a value
of 20 and the other has a value of 10 then the system correctly issues
error L3 425.
regards,
Ramana -
Hi,
I have a query relating to the determination of bins for my bulk putaway strategy.
On my bulk storage type I am using putaway strategy B (Bulk Storage) and mixed storage indicator C (several batches per bin only SU bulk storage)
Having generated a putaway the system successfully denotes next empty bin until capacity as per the block structure under OMM4 is full. So far so good however it does not then allocate the remainder of the putaway to a bin where the same product is house although a different batch. (ie the error message below appears)
System message L3 009
No destination storage bin to be found in storage type 004
However i can manually denote a bin where there is already the same material but with a different batch. The system then allows this entry.
Does anybody understd why the system would not automatically select this bin which should be ok?
Any ideas appreciated.
many thanks,
Adam.Must be a slow start to the year...too many Xmas ales...
Solution: Set Level of Total Quant Count to 1
Level of Total Quant Count
The Total field is used for internal calculation of the total quant count for SU-managed bulk storage. This parameter influences both stock placements and stock removals.
Stock Placement
For putaways this parameter controls whether the system will automatically mix batches or not. If the parameter is set to "1" (batch neutral), the system looks for a storage bin where the material already exists. The batch number is not taken into consideration in this case. If the parameter is set to "2" (batch specific), the system looks for a storage bin where the batch of the material already exists and attempts to add the new stock to the existing stock. If that isnu2019t possible, the system looks for an empty storage bin. -
Pallet putaway strategy question
Dear all,
I am new in the pallet putaway strategy and need your experience advise if you have done this.
Question.
1 - To use the pallet putaway strategy (i.e. P), do I need to configure the Storage Bin Type search (i.e. spro > logistics execution > wm > strategies > activate storage bin type search)?? Is it compulsory?
2 - To use the pallet putaway strategy, the storage type MUST BE a SUT-managed and that the "SUT check activate" checkbox MUST Checked, am I correct?
thanks
TuffHi,
the storage bin type search and the storage unit type check more or less is the same. You have to define storage unit types, storage bin types, assign which SUT goes into which SBT. Well, and then you activate the check.
You need to do this for the pallet strategy. You do NOT need to activate the storage unit management in a storage type with the pallet strategy.
Best regards
Juergen -
U0093Addn to stocku0094 for putaway strategy u0093 u0093 in storage type not working
Hi
It seems that the flag Addn to stock for putaway strategy in the storage type 103 configuration is not working fine as the quantities of the same material with the same batch sent to the same stype 103, and destination bin are not being added. So by running stock report in WM we see several lines with partial quantities instead of only one line with the total quantity in place. Do anybody know how can that be solved? Or what can be the route cause of the issue? Is there any OSS known applicable to fix the problem?
Thx for your helpHi Alba,
Please check the WM views in MM.
I've checked:
(SAP help pushing F1 when the cursor is set on this thick box)
<i>Indicator: Allow addition to existing stock
Indicator determining whether a material with particular characteristics may be added to existing stock of the same material with the same characteristics in one storage bin.
Dependencies
If the storage type control table does not allow additions to existing stock for this storage type, the indicator set in the material master record is ineffective.</i>
+
(SAP help)
http://help.sap.com/saphelp_46c/helpdata/en/c6/f8449d4afa11d182b90000e829fbfe/frameset.htm
I think you have to set this indicator!
BR
Csbaa -
Putaway strategy 'Q' Dynamic quant
Hi,
We have an issue with the internal movement of stock from a storage type that does not allow partial quantity picking.
Scenario: The Putaway strategy for the St type has been configured as 'Q' and picking strategy as 'F'. The available stock in the bin/quant is say 1000 Boxes. I have created a transfer order to pick only 600 boxes. when i confirm the transfer order system is confirming the full 1000 boxes rather than picking only partial qty. Full stock removal has not been activated for this St type in config.
We would like to know if this is something to do with the st type with Q config(like does Q allows picking of complete quant only?).
if anyone has faced this issue earlier would be great to get some hints.
Thanks,
HarishFor our movement type over deliveries are allowed. Below is my observation:
1. when we transfer stock from bulk storage type system allowing us to confirm part pallet using mvt type say 9**.
2. when we transfer stock from dynamic quant number then system does not allow us to confirm part pallet but confirms full pallet only and this is using the same mvt type 9**.
we are using same movement type for transfer of stock from both these storage type onto a staging area which is a interim location but system is behaving differently for these two scenarios.
I am not sure if standard SAP has made dynamic quant storage type to allow withdrawal of full pallet only and needs help if someone has faced similar issue.
Best Regards,
Harish -
Putaway Strategy I: addition to existing stock
Hi,
I've set the storage type search sequence C01 as follows:
1st storage type: H01: (putaway strategy: I, mixed storage; addition to existing stock; capacity check method: 4)
2nd storage type: J01: (putaway storage type: C: open storage)
But the problem is, when I perform GR, there's enough space in the bins under storage type H01, but the system suggests me to put the material to open storage J01. What's the problem?
Thanks.Hi Csaba,
Thanks a lot for your advice.
Yes, "mixed storage" are not suggested to be activated according to the SAP help document.
But the fact is, no system warning or error message occurred when I activate "mixed storage" for the storage type H01 with putaway "I".
Current requirement is, I want the system search storage bin by the following sequence:
1. sequence 1
Firstly, search the storage bin that contains same material
2. sequence 2
if above search failed, then search another non-empty storage bin <--- No performed by the system
3. sequence 3
if both above failed, then search empty bin.
4. sequence 4
search storage bin in other storage type according to the storage type search sequence
But the problem is, by the putaway strategy I, the systme does NOT perform sequence 2, i.e. search other non-empty storage bin under the storage type H01 (the putaway strategy for H01 is I, and I activated "mixed storage" for it) .
The big proglem is, if I select the putaway strategy as I: additin to existing stock, the system only
look for the bin with same material or empty bin; the system does not look for the bins contain other
materials even though the bins are big enough to store the material.
So what's the problem? If I don't use putaway strategy I, is there any other putaway strategy meet my requirements?
Kindly please advise again.
Regards -
Putaway strategy EWR (storage location re pack)
Hello Experts,
In order to repack certain part numbers that come in as nested HUs, yet need to be delivered as single HUs (subwoofer, Klima compressor, u2026), directly after goods receipt, these parts should be redirected directly to the repack area. Therefore we ask for the creation of a putaway strategy EWR that will allow for this.
Could you help me to know what puway strategy can l use and how configurate this in the system.
Regards,
HugoHi,
First put way strategy is for different function it is not meant for packing function
You can explore packing functionality and or HANDLING UNIT MANAGEMENT
In your case you have to distributed HU and this you want to pack in 1 HU
Check t-code HUPAST
When you go inside you will find option Pack material and pack HUs
kapil -
Putaway strategy for rack storage and floor
HI
we have define one warehouse room as One Storage Type. its rack storage . Storage unit
managed . in each storage bin one Su (pallet) can be placed. Some times we keep stocks (on pallets) on the floor
(Pallets in one layer). No of Pallets(SU) is defined at that floor, say 100 pallets can be placed on the floor.
we need Capacity check method = 2 (Check based on palletization accord. to SUT 1).
Which Putaway strategy should be applied for this storage type.? considering 1 bin = 1 pallet and Pallets on the floor.
thanks & regards
thomasHi Hein
yes, creating seperate storage type for racking and floor is a solution.
but if we want to keep it as whole room as One Storage type.
what you think about putaway strategy "P" Pallet putaway strategy. if we consider floor as speerate BIN TYPE and define BIN TYPE and SUT permitted . And Allowed SU in that BIN TYPE.
your opnion please.
thanks & best regards
Thomas -
Difference between open storage & Bulk storage PUTAWAY STRATEGY
Dear all,
What is main difference between open storage & Bulk storage PUTAWAY STRATEGY ?
Thanks & Regards,
Olet MallaHi,
Open storage is a type of warehouse organization in which you define a single storage bin for a storage section. Normally if it a large area with one (or more) storage sections.
Materials that occur in large quantities and generally take up a lot of space in storage are often stored in bulk storage. Mainly it is used for Reduced need for physical storage bins, Fast access to the trading units, Clear structuring of the warehouse (into blocks and rows)
This putaway strategy searches for storage bins in bulk storage.
Thank you -
Hi Gurus,
I have a requirement relevant to putaway:,
My client is using all pallets just joining them together in the warehouse and material placed on mixed basis. when ever the
material comes they find the empty space through out the warehouse and it will be placed. there is no pallet capacity and
no markings, many pallets has joined together from one place to another place and they consider it as one bin. I have to define
a putaway strategy for the same.
If I use SUT strategy, there is no material specificity per bin and the qtty as per them, in bin many material will come with different shipping dimensions.
Please give a suggestion for the same. your help will greatly appreciated.
Thx in advance.
Regards
RaghuHi
You can try put away strategy B or C
B is block storage and you can specify how many pallets can fit in and even how high you can stack them
C is ope storage for which you can place as many pallets as you want
I hope that this helps
Frenchy
Maybe you are looking for
-
How to generate oracle report output in a comma separated format in reports
Pls any one can help in generation of oracle report in comma separated format in reports 10g..... thanks, prasad. 1,Chennai,Nokiasiemen,Convent junction,5535
-
I have a problem with starting up the app on ubuntu 8.04 - gnome: I had a poblem with prior versions displaying the content of the 'root' window, so i used an environment variable to solve this: AWT_TOOLKIT="MToolkit" in /etc/environment did the tric
-
Oracle Universal Installer tries to install an older Java Runtime
I downloaded the Rdb ODBC Driver for Windows with Oracle Universal Installer. The Installer would install JRE 1.3 but I already have 1.5. How can I avoid this? Thank you.
-
I have 2 email addresses - one I don't use. How would I remove the unused one from my Apple email? Thanks.
-
Call in process VM from new Thread
Hi! I have a c++-Project that creates a jvm in the main-Thread. Then a new thread is created. In the new thread I'm calling a Java-function ( packageFoo.ClassFoo.fooFunction() in foo.jar). The function (fooFunction) is executed correctly until a poin