Putting 8GB card in OS 4.2.2
Does anyone know what would happen if I put an 8GB in my BB 8830 now with only OS 4.2.2 while I wait for 4.5 to come out? I was told you needed OS 4.3 or later to use an 8GB card but it is not out for the 8830 yet.
Max. Media Support depends on the version of device OS that you're using.
BlackBerry Device Software Media Card Size Limit
BlackBerry Device Software 4.2.0 Up to 2GB
BlackBerry Device Software 4.2.1 Up to 4GB
BlackBerry Device Software 4.2.2 Up to 4GB
BlackBerry Device Software 4.3.0 Up to 8GB
All are microSD.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit
Similar Messages
-
I just purchased two new SanDisk 8gb SD cards for my trail cameras. When I put the cards into the trail cameras, the cameras will take pictures but it won't store them on the cards. When I put the cards into my 35mm camera the camera tells me that the cards need to be formatted. I have went through the steps in the disk utilities and erased the cards, which I assume is the same as formatting them?? I have tried this for hours and have had no luck getting these things to work at all. It was awful disgusting when I checked my two trail cameras the first time and found out that they had taken close to 75 pictures but the cards were empty. When I bought my 35mm camera several years ago, I bought a couple of Kodak SD cards and used them right out of the package and never had to do any of this formatting thing. I don't understand what is going on and could sure use some help with this. Thanks for any information anyone can give me with this problem. I would love to have seen what animals set my cameras off 75 times in the last few days. Thanks again.
Respectully
JimAFAIK cameras offer their own built-in format utility for inserted SD cards. You should use that. Otherwise, refer to the manual that came with your camera to determine precisely how your SD cards need to be formatted to work properly. Personally, I'd suggest Partition Scheme: MBR, and Filesystem: FAT32.
Try to limit the number of formats you perform on the SD cards, though, as you're reducing their lifespan. I believe formatting causes re-writes to a portion of the SD card that has fewer read/write cycles than the rest of the card as a whole. -
When i put any stuff in my 8gb card till 2gb or more it reponds very slow in x-plore. Otherwise it is fine in menu. So my problem is that it had formatted itself two days back. I thought that it might be a virus so i was scanning for it and everything on the card vanished and showed only one file of 8kb! And in properties it showed 2gb is filled! So i formatted my card once again and also phone memory. But today it was behaving the same. But luckily nothing was gone but photos is not appearing in gallery. What would the problem? I'm using Sandisk microSDHC C2 card.
Please reply for my posts also! Thanks in advance.
N82 Just Rocks! V30.0.019
Theres nothing in kudos, but to guide one is a great thing!But my problem is not only of photos. Major problem is of memory card.
Please reply for my posts also! Thanks in advance.
N82 Just Rocks! V30.0.019
Theres nothing in kudos, but to guide one is a great thing! -
I want to know that if i want to download facebook on my iphone 4 or any other apps then it ask me put my card details for payment. why is that. if they are free then why do i need to give my card details?please help me anyone.
Just select no credit card as outlined here:
http://support.apple.com/kb/ht2534 -
I tried holding down both buttons like everyone said and this doesnt work. My phone was shipped new from Ontario to Sask and took about a week to get here,Could it be because my battery is so low? And shouldnt it power on when it's plugged in or show a phone charging icon or have some lite on? My laptop won't even discover it when I plug it in. When I first took it out of the box i called virgin mobile.The lady told me to put sim card in because it did turn on at first and was asking for sim card so i put it in and all kinds of languages were displayed so i clicked on english and then then somehow shut the phone off because i wasnt familiar with it yet i have no idea how i shut it off.Anyway, I read a bit further and saw where the power button was and tried to turn it back on. No luck the apple logo appears with what looks like a hairline crack on the apple itself and a very thin blue bar no thicker than a pen stroke its about halfway right behind the apple logo like its going to power on but it doesnt, it just goes black.Then when I hold the 2 buttons down, the home button and the power button at the same time, the apple logo flahes on about every 3or4 seconds as tho its going to turn on but it doesnt, occasionally the bar comes up with the logo but not every time.What can I do? Will it work if I let it charge for a couple hours? Does it need a couple hrs and shud there at least be a charging icon showing me its charging?? I have it hooked up by USB to my laptop charging.My computer and Itunes doesnt even acknowledge its even there. PLEASE HELP? Thanks so much!
Plug your phone into the wall charger for at least 30 minutes...make sure you have a sim card in the phone...then:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
Make sure you have no anti-virus software running or any firewalls...turn all of that stuff off. -
Hi
I made my apple id for my new 1st apple ipad air from my hp laptop. when i want to access appstore to download some free apps it is asking to review my details for credit card and i dont have that.
I know that we can make new account from ipad/appstore without putting down payment details but how can i access appstore without putting credit card details on my already existed apple id.?You can create an iTune and App Store account without credit card
1. Sign out of current Apple ID if you are sign-in to one (important)
2. Go to App Store and select a free app
3. Tap INSTALL APP
4. Create New Apple ID
5. Confirm Your Country
6. Agree with Terms and Conditions
7. Fill in your Apple ID and Password (you must create a new Apple ID; don't use your old Apple ID)
8. Create and answer your secret question
9. Select NONE for Payment Method
10. Fill in Billing Address
11. Submit application for new Apple ID
12. Wait for verification email
13. When email arrive, verify your account
14. Start downloading your free apps -
Formatting MicroSD card in Disk Utility-8GB card now showing as only 200MB!
Hi Guys
I want to give my sd card to a friend and so I tried to secure erase the data in disk utility and somehow managed to turn an 8gb card into a 200mb one while trying to format it to FAT format. This has happened to two 8gb cards from different manufacturers.
I tried to delete the partition and reformat the card to no avail. Even tried the solution here with no luck -
http://discussions.apple.com/message.jspa?messageID=11056512
I have extracted the log from disk utility when this happened (below) if that can give any clues
Thanks for the help!
2010-07-08 23:20:48 +0100: Mounting disk
2010-07-08 23:20:48 +0100: Erase complete.
2010-07-08 23:20:48 +0100:
2010-07-08 23:21:05 +0100: Preparing to zero disk : “UNTITLED”
2010-07-08 23:21:05 +0100: Passes : 0
2010-07-08 23:45:15 +0100: Secure Erase completed successfully in 24 minutes.
2010-07-08 23:45:15 +0100: Preparing to erase : “UNTITLED”
2010-07-08 23:45:15 +0100: Partition Scheme: GUID Partition Table
2010-07-08 23:45:15 +0100: 1 volume will be created
2010-07-08 23:45:15 +0100: Name : “UNTITLED”
2010-07-08 23:45:15 +0100: Size : 8.07 GB
2010-07-08 23:45:15 +0100: Filesystem : MS-DOS (FAT)
2010-07-08 23:45:15 +0100: Unmounting disk
2010-07-08 23:45:15 +0100: Creating partition map
2010-07-08 23:45:16 +0100: Waiting for disks to reappear
2010-07-08 23:45:16 +0100: Formatting disk1s2 as MS-DOS (FAT) with name UNTITLED
2010-07-08 23:45:17 +0100: 512 bytes per physical sector
/dev/rdisk1s2: 15313672 sectors in 1914209 FAT32 clusters (4096 bytes/cluster)
bps=512 spc=8 res=32 nft=2 mid=0xf0 spt=32 hds=255 hid=0 bsec=15343616 bspf=14955 rdcl=2 infs=1 bkbs=6
2010-07-08 23:45:17 +0100: Mounting disk
2010-07-08 23:45:18 +0100: Erase complete.
2010-07-08 23:45:18 +0100:
2010-07-08 23:51:47 +0100: Preparing to zero disk : “UNTITLED”
2010-07-08 23:51:47 +0100: Passes : 0
2010-07-08 23:52:05 +0100: Secure Erase skipped after 16 seconds.
24.5% complete.
2010-07-08 23:52:05 +0100: Preparing to erase : “UNTITLED”
2010-07-08 23:52:05 +0100: Partition Scheme: GUID Partition Table
2010-07-08 23:52:05 +0100: 1 volume will be created
2010-07-08 23:52:05 +0100: Name : “UNTITLED”
2010-07-08 23:52:05 +0100: Size : 209.7 MB
2010-07-08 23:52:05 +0100: Filesystem : MS-DOS (FAT)
2010-07-08 23:52:05 +0100: Unmounting disk
2010-07-08 23:52:05 +0100: Creating partition map
2010-07-08 23:52:05 +0100: Waiting for disks to reappear
2010-07-08 23:52:06 +0100: Formatting disk1s1 as MS-DOS (FAT) with name UNTITLED
2010-07-08 23:52:06 +0100: newfs_msdos: /dev/rdisk1s1: Permission denied
512 bytes per physical sector
/dev/rdisk1s1: 407120 sectors in 50890 FAT16 clusters (4096 bytes/cluster)
bps=512 spc=8 res=1 nft=2 rde=512 mid=0xf0 spf=199 spt=32 hds=32 hid=0 bsec=407552
2010-07-08 23:52:06 +0100: Mounting disk
2010-07-08 23:52:06 +0100: Could not mount disk1s1 with name (null) after erase
2010-07-08 23:52:06 +0100: Disk Erase failed with the error:
File system formatter failed
2010-07-08 23:52:06 +0100: Erase complete.
2010-07-08 23:52:06 +0100:
2010-07-08 23:52:06 +0100: Erase complete.
2010-07-08 23:52:06 +0100:
2010-07-08 23:54:41 +0100: Verifying volume “NO NAME”
2010-07-08 23:54:41 +0100: Starting verification tool:
2010-07-08 23:54:42 +0100: ** /dev/disk1
2010-07-08 23:54:42 +0100: ** Phase 1 - Preparing FAT
2010-07-08 23:54:42 +0100: ** Phase 2 - Checking Directories
2010-07-08 23:54:42 +0100: ** Phase 3 - Checking for Orphan Clusters
2010-07-08 23:54:42 +0100: 74 files, 203800 KiB free (25475 clusters)
2010-07-08 23:54:42 +0100: Repair tool completed:
2010-07-08 23:54:42 +0100:
2010-07-08 23:54:42 +0100:
2010-07-08 23:54:47 +0100: Verify and Repair volume “NO NAME”
2010-07-08 23:54:47 +0100: Starting repair tool:
2010-07-08 23:54:47 +0100: ** /dev/disk1
2010-07-08 23:54:47 +0100: ** Phase 1 - Preparing FAT
2010-07-08 23:54:47 +0100: ** Phase 2 - Checking Directories
2010-07-08 23:54:47 +0100: ** Phase 3 - Checking for Orphan Clusters
2010-07-08 23:54:47 +0100: 72 files, 203824 KiB free (25478 clusters)
2010-07-08 23:54:47 +0100: Volume repair complete.2010-07-08 23:54:47 +0100: Updating boot support partitions for the volume as required.2010-07-08 23:54:47 +0100: Repair tool completed:
2010-07-08 23:54:47 +0100:
2010-07-08 23:54:47 +0100:
2010-07-08 23:55:00 +0100: Preparing to erase : “UNTITLED”
2010-07-08 23:55:00 +0100: Partition Scheme: GUID Partition Table
2010-07-08 23:55:00 +0100: 1 volume will be created
2010-07-08 23:55:00 +0100: Name : “UNTITLED”
2010-07-08 23:55:00 +0100: Size : 209.7 MB
2010-07-08 23:55:00 +0100: Filesystem : MS-DOS (FAT)Rednecs wrote:
I want to give my sd card to a friend and so I tried to secure erase the data in disk utility and somehow managed to turn an 8gb card into a 200mb one while trying to format it to FAT format.
2010-07-08 23:45:15 +0100: Partition Scheme: GUID Partition Table
That's probably not the best partition scheme for a FAT volume format. In the Partition tab set "1 Partition", then click the "Options" button and select "Master Boot Record". -
I put my card num in here so I could buy sum things wen I didn't have the money but I don't have any money on my card so I went n bought a $25 card n now it won't work cyz I can't get my 1 card num off here it won't let me.. How do I get that card num off!!
i the top right corner of the iTunes store click on your account, log in and go to billing info. Hope this helps
-
iphone 3gs can not talk on or recieve calls, but every thing works, apps., music, internet, ect.. put sim card in another phone and able to call and recieve calls, what happened.
Reset phone - press both home and sleep/wake buttons until the Apple logo appears in 10-15 seconds.
Settings > General > Reset > Reset Network Settings -
when I finish putting my card details in, I press next and then it says an error occurred!(above the different type of cards) some one pls help!
when I finish putting my card details in, I press next and then it says an error occurred!(above the different type of cards) some one pls help!
-
Unable to transfer photos (jpeg) from desktop to SD card for Cannon Power shot camera.
Appears as if successful, jpegs show up in SD card window, but they do not show up when I put SD card in camera.
Go through entire process to no avail. SD card is not locked.
Thank You
LAhh, extra info ahead...
Pictures on SD card, SanDisc-SDHC, 4GB Card, are jpeg. The ones I would like to put on the card are jpeg as well.
SD format MS-DOS (FAT32) .
3.876 GB available on card.
I have
Exported the pics from iPhoto to the desktop. Inserted sd card into side of iMac. The icon of card popped up.
Attempts to no avail:
1) Dragged the photos to the disk icon for the sd card.
2) Dragged pictures into the DCIM folder (where all photos taken on camera resided).
3) Created new folder. Put photos from desktop into folder and dragged ne folder inside DCIM -since pictures taken at different times had their own folders inside the DCIM folder.
Every time the photos/files end up showing up on the sd card as long as it is in my computer but when ejected and inserted into my camera, all imported photos/jpeg file are gone.
Hmmmmm -
I have a avchd file approx 15min in length on a sdhc card. My camera says there is one file. When I put the card in the PC ( Win8.1), the PC says there are 2 files, one is 11mins approx and the other is 4mins long approx. If I bring these files into premier CS6 they are both identical length of 15mins What is going on here??
Hi and thanks... kinda getting there but still unsure WTF. I have found that the files are split at 197gb (consistent with other uses on the web), however when I import them into premier cs6 they are 15mins and 29secs, on the SDHC card the file size is 197gbfor the larger, then the shorter one is 634mb. BUT when I import both files into premier cs6 they are identical size and length both are 15.29.19 or 15mins 29sec and 19frames. I have put the card in the camera and run that as an external and it sees the files as 2 split files while if I view the files straight off the camera there is only 1 file. Why it says there are 2 files of different sizes and premier imports them as 2 identical files is a mystery to me! I have also gone back and looked at some archived footage on another card and yes there was one split file when the size exceeded 197gb but of course when I imported that footage nothing was missing because cs6 imported the file as a complete 'take' of the whole length
-
I have my card from my camera in my printer and it is blinking, the untitled box comes up on the desktop then Iphoto pops up and nothing happens at all use to do it on its own. How do I force this to load the pictures
Sorry I just assumed the force was a easy thing and I have never asked a techo question before. Hope the information below helps
It is a Mac Intell
Operating system is apple mac? Not sure how to answer that quesiton
Printer is a HP photosmart c4280 all in one
Camera is a Sony Cyber shot
The untilted thing is when i put the camera card into the printer slot a box on the right hand side comes up on the desk top it is a picture of a white box with a open slot in the front and it states Untitiled. If I take the card out this box goes away
I am trying to download pictures. Use to be I put the card into the printer, iphoto would open and then you could choose which new picutres you wanted to import. Now iphoto opens up and does not show any new pictures, there is no import at the bottom right and it just sits there. I would like to load pictures that I have taken all summer. I do hope this helped and I worded it corretly enough that would make since...
Thank you -
Had pro. photos done, photographer gave me SD card with 298 pics on it. I bought adapter to put SD card in. Will viewing them on iPad reformat the pics?
No. The photo viewer will ask you if you want to import (copy) all or only selected photos. After the import is done, a dialog box will pop up asking if you want to keep or delete the photos on the card. Select no if you want to keep your photos on the SD card.
-
new Mac desktop OS 10.10 installed photoshop CC. Works for some cards but when I download another Lexar 8gb card get message 'could not complete request bec file format module cannot parce the file'. Do not understand nor what to do. Could you assist me, please?
rbeefSounds like the card reader isn't compatible with SDHC or SDXC cards. What card reader are you using?
Maybe you are looking for
-
I tried to get my iPhone and Macbook Pro to share a picture using Airdrop. They do not see each other. Why is this?
-
When i start up in the morning, i get a gray screen. it lingers for a while, then a gray image of a globe/earth pops up in the middle of the screen where the apple icon normally would. the globe flashes on an off for about 60 secs. then the apple ico
-
Problems with borderless printing with iPhoto '08 and HP Photosmart Printer
I am trying to print borderless 4x6 photos on HP Photosmart C6250 (same as all HP C62xx Photosmart printers). I am using the HP 4x6 photo paper with the perforated tab. When I select the paper size, I specify Borderless 4x6 in/10 x15 cm (tab). Accord
-
Copy to my calendar missing after migration Exchange 2010-2013
Hi there, We have migrated our Exchangeserver from Exchange 2003 too 2010 and then too 2013. In Outlook 2007 (with Exchange 2003 and later 2010) we had a button in the 'New appointment window' called 'Copy to my Calander' When we made an appointment
-
Dear Gurus, I have few issues which i wanted to discuss: 1: The material to be sold is scrap material and is not produced. Stock comes in via MB1C movement type 561 in the scrap storage location. The Material Has only got Sales views & Storage locati