Putting a table and image on wordpress

Hi, I made a two column table with dreamweaver. In one column I had text and in the other an image. I got the code and through the wordpress HTML editor typed it in. The table and the text come up fine by not the image. I uploaded the image to the public folider of my domain but it does not appear on the table when I type the code. Any suggestions?

If you have a few special images that you do not want handled in the normal way (upload to media library), you can create a special "spec_images" folder in the root of WP. Stick those special images in there and use the absolute address to put them anywhere you want, just use the absolute address as the src.
Having this option can come in handy .... if say....don't want the image clickable and displayed on a separate page (for example).
Best wishes,
Adninjastrator

Similar Messages

Problem with put a table in Image....?

respeced sir....
i have an issue like i want to show the content of table on image so could any one tell me how can i put a table on image......
like
<table>
<tr>
<td>
some Data from database
</td>
<td>
some other Data from database
</td>
</tr>
</table>
how can i draw that data with table form on image .....
what to do to execuet HTML tag <table> on image so it will give me a simple table like in html page....
same i want to show that table on image can any one help me....
regards......

I've solved this problem now. I had an initializer on a feedback node wired incorrectly which caused unbounded increases in array size.
Thanks for the suggestions I did receive
Neil

Trouble with Tables and image rollovers

I hope someone might be able to help me. l am
designing a website using tables and was wondering if l can have a
thumbnail image in mutliple cells that can be rollovered to open a
larger images in a common cell without the use of layers. If
someone was to even point me in the right direction using the right
terminology l should be able to find the info l need. Or maybe it's
as simple as letting me know that l must use layers in a cell to
get that result. Thanking you in advance for your help.

NEVER use layers directly in a table cell, or any absolutely
positioned
element for that matter.
There are good methods for doing exactly what you want -
posted here on this
forum - search for "show pic"....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Bill Hewitt" <[email protected]> wrote in
message
news:ff59up$kcc$[email protected]..
>
I hope someone might be able to help me. l am
designing a
> website
> using tables and was wondering if l can have a thumbnail
image in mutliple
> cells that can be rollovered to open a larger images in
a common cell
> without
> the use of layers. If someone was to even point me in
the right direction
> using the right terminology l should be able to find the
info l need. Or
> maybe
> it's as simple as letting me know that l must use layers
in a cell to get
> that
> result. Thanking you in advance for your help.
>

About Fact Tables and Image Tables

Not sure, if this is correct forum for Oracle BI 10.x EE, but still
I couldn't find another forum, quickly, hence posting here.
Pardon me.
Here is the main Q's
I need little help.
Our company is implementing Oracle BI 10.x. We don't have much experience in Siebel Analytics/OBI.
We have few fact tables e.g. W_XXXX_F, which we need/wish to extend. We are not sure about which methodology we should implement. When we talked with few SA experts they mentioned we need to extend based on ROW_WID. Well, this column doesn't exists anymore in many fact tables, so currently we are thinking of creating ROW_WID on this F table manually and then create WC_XXXX_FX and take these two tables in physical layer of RPD.
Additially, we need to create few Informatica mappings, again SA experts pointed out to use Image tables. Our data source is Oracle Applications, I don't have much idea about Image tables, but clearly there is not S_ETL_I_IMGAGe or so tables in Oracle Apps
Please guide us as how to proceed on these two issues.
Rajat

Not sure, if this is correct forum for Oracle BI 10.x EE, but still
I couldn't find another forum, quickly, hence posting here.
Pardon me.
Here is the main Q's
I need little help.
Our company is implementing Oracle BI 10.x. We don't have much experience in Siebel Analytics/OBI.
We have few fact tables e.g. W_XXXX_F, which we need/wish to extend. We are not sure about which methodology we should implement. When we talked with few SA experts they mentioned we need to extend based on ROW_WID. Well, this column doesn't exists anymore in many fact tables, so currently we are thinking of creating ROW_WID on this F table manually and then create WC_XXXX_FX and take these two tables in physical layer of RPD.
Additially, we need to create few Informatica mappings, again SA experts pointed out to use Image tables. Our data source is Oracle Applications, I don't have much idea about Image tables, but clearly there is not S_ETL_I_IMGAGe or so tables in Oracle Apps
Please guide us as how to proceed on these two issues.
Rajat

JEditorPane, html, tables and images

I am trying to use jEditorPane to display an HTML document. If images are included into cells of a table, the width and height of the cells do not adjust to the size of the images (as it happens with common web browsers), no matter what parameters I use for TD and IMG tags.
Do you experience the same problem? Is there a solution?
Thanks.
Ruben Razquin

Hi Ruben,
you will have to implement adjustment of table cells yourself to achieve this. With the existing way JEditorPane et. al. render tables table cells always are sized either in default sizes or by attributes explicitly giving the size (such as attribute WIDTH).
Ulrich

Tables and images imported to another domain, Missing

My DBA exported my application as well as images to SQL. I was able to imported to another domain. When I opened the application, I was not able to see graphics and the tables are not there as well. What went wrong?

Hi,
In apex , there is a way to export [APPLICATION +DDL+ IMAGE SCRIPTS] using SUPPORTING OBJECTS.
Please check whether your DBA imported applicaiton in your schema? while importing the screen prompt you to choose which schema to import table
Let try one more time.
please give some more details to help you more.
Thanks
Mark Wyatt

2 HD laptop setup - Best place to put Catalog, Cache, and Images??

If I have two 500GB 7200rpm hard drives in my MBP, what is the best place for LR3, the catalog/previews, ACRcache, and the image files themselves?
SATA3 connection for both HDs
Should the boot drive hold the app and cache, while the second drive hold the files and catalog?
Should the catalog and cache always stay on the same drive?
Does it matter at all where the image (raw) files sit?
Thanks!!

I'd just keep the images on a different drive with a 2 internal drive setup.

After reopening dreamweaver files, the table and its contents are not shown in design view

I got a problem with deisgn view which has stucked me for the whole week. I've designed a webpage with dreamweaver CS4. After reopening this webpage, I got problem to see the tables and images inserted in dreamweaver (the sliced images from fireworks works well). Somehow this problem only existed in design view, but NOT is browswer view/ live view. I thought it is the setting problem, but I tried to reopen the webpage I designed earlier... got no problem in either design or live view. I also tried starting over another new file, same problem existed (tables/images do not show in design view) I am really confused. Any thoughts?
I've already done my research everywhere, but cannot find solution.

Thank you so much... it works...
I should come here earlier... wasted lots of time !!

Accessibility: Reading order of tables and anchored frames

I am creating accessible, tagged (section 508 compliant) PDFs in FrameMaker 9. The reading order for tables and frames is not correct.
When I view the PDF reading order using Adobe Acrobat Professional or another screen reader, anchored items such as tables and anchored frames are placed last in the reading order, regardless of where they appear in the document flow or page layout. The reading order skips over all tables and frames, reading all paragraphs on a page first, then reading the tables and frames as the last objects on the page. This logically doesn't make sense to skip over tables/frames as they generally apply to the content that preceeds it.
For example, the following document structure:
<Paragraph 1>
<Table 1>
<Paragraph 2>
<Anchored Frame 1>
<Paragraph 3>
<Anchor Frame 2>
<Paragraph 4>
is being read by assistive technology as:
<Paragraph 1>
<Paragraph 2>
<Paragraph 3>
<Paragraph 4>
<Table 1>
<Anchored Frame 1>
<Anchor Frame 2>
I want the document structure to be read correctly as intended.
In otherwords, the PDFs generated by FrameMaker 9 are not completely accessible because of incorrect reading order output by default. This information is not listed in the VPAT for FrameMaker 9.
I want to avoid any post processing using Acrobat's Touch Up Reading Order tool. Is there a way to automate updates to reading order?
Can FrameMaker 9 logically place tables and anchored frames into the correct reading order? How do I adjust these settings?
Thanks in advance!

As mentioned above, tables and anchored frames are inserted into thier own paragraph style "Frame". The paragraph style "Frame" is tagged. To my knowledge, there are no options for tagging or not tagging tables or anchored frames.
Regardless of which paragraph type the table or anchor frame is inserted into, and what that paragraphs tagging settings are, it is still last in the reading order.
I've tried a variety of options: tagging the "Frame" paragraph style as a sibling, child, and parent of my other paragraphs; I've even tried omitting it from the reading order. None of these options present anchored frames (and tables) in the logical reading order.
Even images that are inline (within a paragraph; not in thier own paragraph) are not being read as part of the paragraph. Inline images get skipped over by screen readers and get read at the end of the page, which makes no sense whatsoever.
All tables and images end up at the end of the reading order (after ALL paragraphs) regardless of the tagging settings.
Refer to my previous screenshot for a clear diagram of what is happening to the reading order. Each of those anchors is in it's own paragraph style. I want tables and anchored frames to be sequential in the reading order along with paragraphs. (1,2,3,4,5,6 not 1,4,2,5,3,6.)
I'm using the Tags tab of the "PDF Setup" dialog to adjust these settings. Is there somewhere else I should be making changes to the reading order?
This is a bit disturbing because FrameMaker touts creating accessible documents and this severe reading order issue impares my ability to do so. I would not consider documents that jump around the page in an illlogical, fixed order, to be accessible. I'm very suprised that no one else has encountered this issue (at least that I can find...)

How to display List and Image on Single Screen?

Hi Friends,
I wanna display Image and List on single screen.
Its not possible using Form which will contain both. either I can list or form which contain image as far I know.
I have seen one J2ME application which contain Image and below that there is list. Can anybody tell me how?
Thanks,
Rohan Chandane

Hi,
Are you able to put a list and image into a form.
If so plz let me know the method to do tht.
thanks.

2 SATA drives - Where should I place my ACRcache, catalog, and images?

Two drives
Application is on the boot drive.
Where/how should I split up the ACRcache, catalog, and images?
Should I have the catalog on a different drive then the cache?
Should the catalog and cache be on the same drive?
thanks

Louie Sherwin wrote:
dorin_nicolaescu wrote:
I would put my catalog and images on one drive and have my system, applications and ACR cache on the other.
Why?
Hi Dorin,
Well basically there are four areas where disk I/O can impact performance. The catalog, previews, images and ACR cache. So with only two drives how do you minimize disk contention during typical LR editing?
Of the four the ACR cache activity is going to be both frequent and be writing large blocks data. Splitting it off first is makes the most sense. Putting it the system disk also makes sense since while running Lightroom that is going to be mostly idle since hopefully you are presumably just running LR.
The catalog is clearly going to have the highest update frequency but data sizes of each will be very small. So keeping it separate from the cache is a good idea.
The previews by default get stored with the catalog and since they are generated in the back ground with lower priority it is best to leave them where they are.
The image files clearly are best on the second disk. So practically it makes more sense to keep the catalog and images together if for no other reason than backup is simpler. Just clone you image disk every couple of days and you have a complete usable catalog.
-louie
Louie,
So, based on your experience, how would you go about it with a portable (I have a Macbook Pro). I have the application, catalog and previews on the boot drive, images on an eSATA 2TB RAID 0, ALRCache on another eSATA just straight 1TB - (all 7200 RPM / 32MB cache) via Expresscard 34 (which operates at 1.5)..
Jay S.

Table layout and image display problems

Im having a few problems at the moment, designing a layout
using tables. I need to have 3 seperate tables, 1 for the left
side, 1 for middle and 1 for the right. However I can only get the
left and middle table on the same row, after that the right table
jumps down to the next row.
My second problem is with some images displaying in the
preview. 3 images wont display, they are the same extension (.jpg),
in the same folder as the rest but unlike the others wont display.
I can swap them out for other images which display fine so I cant
understand why they arent showing.
Any help would be most appreciated.

> Im having a few problems at the moment, designing a
layout using tables. I
> need
> to have 3 seperate tables, 1 for the left side, 1 for
middle and 1 for the
> right. However I can only get the left and middle table
on the same row,
> after
> that the right table jumps down to the next row.
Use a three column, 1 row table, and put one of your tables
into each of the
three cells.
> so I cant understand why they arent showing.
Show us the page, please.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Isileth" <[email protected]> wrote in
message
news:ev0dpc$60t$[email protected]..
> Im having a few problems at the moment, designing a
layout using tables. I
> need
> to have 3 seperate tables, 1 for the left side, 1 for
middle and 1 for the
> right. However I can only get the left and middle table
on the same row,
> after
> that the right table jumps down to the next row.
>
> My second problem is with some images displaying in the
preview. 3 images
> wont
> display, they are the same extension (.jpg), in the same
folder as the
> rest but
> unlike the others wont display. I can swap them out for
other images which
> display fine so I cant understand why they arent
showing.
>
> Any help would be most appreciated.
>

I want to store an image in R3 table and retrive it

Hi,
i want to store an image in R3 table and retrive it from my function module.
Can any one tell me what is the step by step procedure to do that.
I am new to ABAP.
Regards,
H.V.Swathi

Dear Swethi,
You can move images to SAP using SE78. then u can use them where ever u you require them.
SE78->GRAPHICS->BMAP here give ur image name and click on save
Rgds,
Kiran
Edited by: Kiran on Jun 11, 2009 7:15 AM

Loading images in a table and show this image in a html form

Hi All,
I'am a newbie in Oracle and PL/SQL.
I need to load a image in a table and restrive this image and show it in a html form. I'd like to use a PL/SQL procedure.
Thanks in advance for any suggestions.

Hi,
This forum is for Oracle9iAS Web Services discussion.
I would recommend that you post your question to the 9iAS - General discussion forum.
Regards,
Tim

How to upload images in to custom table and display them in normal ABAP report?

Hi Experts,
Can anyone suggest me ,how to upload images into customised table and display thoes images in normal abap report.
Thanks in Advance,
Rgds,
Anusha

Hi Experts,
Can anyone suggest me ,how to upload images into customised table and display thoes images in normal abap report.
Thanks in Advance,
Rgds,
Anusha

Putting a table and image on wordpress

Similar Messages

Maybe you are looking for