Putting DVD SP extra content on seperate hdd

I would like to place the extra content installed too: home/library/application support/dvd studio pro onto a backup drive and have it accessible by DVD SP like normal. I tried it once making the folder an alias too the original content on the 2nd harddrive but it won't recognize the alias I guess. Is there anyway around this? I really don't want 8gb's of extras cloggin up my main drive.
thanks

Hi guys,
Many, many thanks for both replies.
*Nikhil - I followed your steps but the HDD showed up the same info: 430gb used, 70gb free*
*eww - More success here I'm pleased to report. I downloaded and ran DIX and the main 2 culprits are folders called 'Volumes' (199gb) and 'Users' (183gb)*
I've traced my steps from yesterday and I have a theory. After booting up the new HDD yesterday and installing OSX and Applications from the DVDs I think I may have done 2 things: Copied my files from the external HD using the supplied software, then restored the system using Time Machine. My guess is than by doing this I inadvertently doubled-up all of my stuff in different locations.
I'm still not sue why the additional copies aren't showing in Finder, but at least I've identified them and can resolve the issue. Thanks again,
Rhod
P.S. Nikhil - as a side note, the WD Scorpio Blue seems to be working well so far: no additional noise or heat to report and installation was straightforward...I'm happy to admit that the above issue was probably me, not the HDD

Similar Messages

DVD-Rom extra content not being included in build

I'm really confused - I've set a location for a folder in which 4 .pdf files are included. But when I build the project the folder isn't being included in the root.
Here's what I have: DVDROMContent/PDF/4 files
I'm selecting the folder named "DVDROMContent" as the location, so according to the DVDSP manual it should be placing the folder "PDF" at the root, but for some reason it isn't.
Any suggestions?

I believe that if you're doing just a build it does not copy the files to the build location. If you burn it to a DVD or create an image to hard disc then the content will be written.
o| TOnyTOny |o

PRE 9- installed extra content from DVD, but still getting prompt?

I just installed Premiere Elements 9 from DVD.
I also installed the second DVD of extra content.
When I start up the PRE 9 program, I get a prompt warning me to "Install Full Content- a reduced set of content... has been installed. You can install the full content by inserting your content DVD or downloading it."
Even though I had already installed the second DVD of content (which was a LOT of content!), I put in the DVD again. This time, the installer wanted to REMOVE the content, so I took the disc out before going any further.
I am not sure if the additional content was successfully installed or not. If so, how do I get rid of that popup prompt?
When I have a project open in PRE9 and open the Disc Menus tab, there is a dropdown box of menus by filter, including Entertainment, General, Happy Birthday, etc.
If I click on Entertainment, for example, I have a choice of Art in Motion, Music video, Performance Star, Broadway, Popcorn, or Stage. There is a Main Menu and Scene Menu for each of them. Happy Birthday has Balloons, Birthday Party and Kids Party. Etc.
Do I have the additional content properly installed, or is there supposed to be more than this? If there is, how do I get the PRE 9 program to recognize what I already installed from that second disc?
My system:
Windows 7 Home Premium 64-bit
16.0 GB RAM
AMD Phenom II X6 1090T Processor 3.20 GHz
ATI Radeon HD 4600 Series graphics card
Thanks for all of your help.

From the FAQs to the right of this forum.
http://forums.adobe.com/thread/433730?tstart=0
Happy moviemaking!

Using the extra content from FCP7 on FCPx?

I have Final Cut Studio 3 (Final Cut 7) and Final Cut X on different startup disks just as Apple recommended back last year. Easy for me to do since I have a Mac Pro, so I followed Apple's recommendation, but how do I use the Apple Audio Loops for Soundtrack Pro from Final Cut Studio 3? I have the audio loops on a "data" HDD.
Can I use the templates and LiveFonts from Motion 4 on the new Motion 5?
Final Cut Studio 3 also came with 9GB of templates etc for DVD Studio Pro, is that in any way useful with FCPx? Could the DVD Studio Pro content be used with Toast or some other DVD/Blu-ray authoring/menu software?
By the way, I think I found all the extra content that came with Final Cut Studio 3, but to be sure I have them all, where are they all located?
Thanks for all your help!

I am not sure whether FCP X can use the .caf music but try them by navigating to them in the Effects browser or dropping them in the FCP X browser.
You can't use Live Fonts templates . . . except in LiveType and Motion 4.
The DVDSP content can only be used in DVDSP but that is no problem.
Simply export your video from FCP X in the correct format and use DVDSP as usual.
DVDSP content . . . /Library/Application Support/Final Cut Studio/DVDSP
Soundtrack content . . . /Library/Audio/Apple Loops/Apple
Motion content . . . /Library/Application Support/Final Cut Studio/Motion
LiveFonts . . . . /Library/Application Support/Final Cut Studio/LiveType/LiveFonts

How to print list of file contents of a HDD

Hi Everyone!
(Sorry for using a quote---The copy/paste from my old Text Editor does not work here.... why not? Only if I am doing a quote)
I have a Mac G4 (yes) with Tiger 10.4.11 (yes still) and I have two backup drives.... They should be evenly "filled" but there is over 26 GB difference so that one is going to be running out of space sooner than I want it to. I have 100's of files... I need some program that works under Tiger to either:
1. Print the contents of the HDD (the file names/sizes, etc---there is something that does this in Windows, why not Mac?).
or
2. A program that compares the contents automatically between the two HDD's. Again I have used one on PC's but its really old and company no longer makes it for PC's. Is there one for Mac? I have no idea how to express it to look it up. (I never have both of the HDD's all hooked up by Firewire at same time---afraid of overloading old Mac).... so only if there is a program that does this working under Tiger would I then come back here to ask a question for how to get the two drives hooked up to compare the contents and find out what is taking up extra space.
Mostly the drives have iPhoto items in it so it could be simply a double-entered iPhoto Roll/Album---but never thinking I'd have to compare them---most of the titles begin the same exact way---too difficult to go over unless I can cross off a printed sheet to compare the two drives---or have a computer do that for me.
Any suggestions?
Thanks for reading me!
Mac_Help

Tex-Edit Plus
Universal Version 4.10.2
Mac OS 10.4 thru 10.10
File Size: 10703K
Tex-Edit Plus
PPC Version 4.9.8
Mac OS 10.1 thru 10.3
File Size: 3970K
Tex-Edit Plus
Classic Version 4.1.3
Mac OS 7 thru 9
File Size: 5294K
Tex-Edit
Legacy Version 2.7.2
Mac OS 6
File Size: 257K
Tex-Edit Plus (beta)
Pre-release Version 4.10.3 b2
Mac OS 10.4 thru 10.10
File Size: 10705K
Hi BDAqua!
Thanks for the links! I'll take both of them! (If they fit in my old HD)
Explaining a bit more----I'm using a "PC" to write these questions (yes I have a bunch more) about the old Tiger Mac 10.4.11 G4.
I only have working TenFourFox7450 and OmniWeb as my only two ways to get online now. Very slow. Very limited windows I can open at once to compare or research things, so I'm back on the PC to do all that and copy and paste quotes here for you. Seems once I pass the first question, the only thing Quote does is quote your message---I managed to cheat a bit and got what I wanted to copy from the Tex-Edit page to show up instead..
You recommended that I choose Tex-Edit Plus PPC Version 4.9.8---but as you see above that is only for 10.1 to 10.3 versions..... is there some reason why the Tex-Edit Plus (Beta) above is bad for me? It says 10.4 or higher.
Or why not use the "Universal" Tex-Edit Plus? Seems that covers 10.4?
I got both TextWrangler and Tex-Edit Plus "Universal" Edition to work on the Mac!
Page numbers on the Tex-Edit! Wow!
Thanks!
Also (saving address for later) that page has Eliza on it.. which I had long time ago.... but lost somewhere among all the other programs. So thanks for showing me I can find and add it in later on when I get more space on HDD
I'll type now my reply to your earlier message/posting!
Mac_Help

HT1848 how to put dvd on my itunes

I'M TRYING TO PUT DVDS ONTO MY ITUNES ON MY VISTA COMPUTER

The content owners don't allow it. Buy DVDs with digital copies, or buy movies/TV shows online. You can't legally rip your DVDs.
Please note this topic is likely to disappear... Read section 2.8 of the terms of use.
'nuff said!
tt2

Problems w/downloads(Only letting me download Extra Content, and the Serial #s don't work on trials)

Hi
I just bought Adobe Creative Suite 4 a couple months ago, and since the beginning, I haven't been able to download any of the programs from "licensing.adobe.com".
It gives me the download option for CS4 (Mac, which I'm on, AND PC). I click on the Macintosh option for the Production Premium, and it gives me a long list of things I can download. Of course, I just realized its only "Extra Content", which is why its only letting me download fonts, and "goodies".
I called Adobe, and they told me it would be OK if I downloaded a trial of CS4 and put in my serial number.... Didn't work. Three times in a row, it gave me a red X. So I did the trial version, and now I'm up.
I'm now in the middle of a major animation project without an animating software... Please help me....
All of this pain shouldn't cost more than $1,500.......
How do I fix it?
Thanks,
Cal Slater

We used to have a virus and we have since gotten rid of it and we had a friend who is a PC guy fix it and clean up everything on the PC (for free). That one freebie is now gone, and we've been quoted $75 to $115 or something like that by another trusted PC guy.....but you know what, that money would better be spent being saved toward a Mac that can end this ****. So I am back to wanting to do it myself. I am so frustrated I could scream.
To answer your question, it's just with the iTunes....no other programs give us trouble. I tried downloading another program (I didn't know there WERE other ones till last night) for podcasts (it used to be called iPodder and is now called Juice) but I had no luck. I downloaded a podcast using Juice but couldn't get it into iTunes. I may see if there is another program out there.
And I don't mind running that netsh winsock reset command, but I don't yet know how to get to the command prompt...I'm assuming it's found in what we used to call "DOS mode" back in the old days before WYSIWYG. But I don't know how to get that prompt up. My problem is that I have such limited time to work on this stuff, and by the time my kid gets to sleep at night I am so exhausted and have better things to do....but it's worth it. iTunes and my little iPod Touch have been such a blessing to me. I must march onward....
thanks!!

Extra content not showing up in fcp

hello, when i installed my final cut i installed the 50+ gigs of extra content (sounds, templates, etc) on my second internal hard drive while the final cut apps are on my main hard drive. in final cut, under the veiwer generator pop-up menu there is a options for text, color bars, etc. there is also an option for master templates with an arrow by it. when i scroll to it nothing appears. does the extra content need to be on the same hard drive as the apps or do i have to tell final cut where the extra content is?
thx

hello rgd22,
yes you are correct, there should be master templates in the FCP menu where you are looking ... the implementation of these is a bit, um, inconsistent, and while i can't find a place to set their location (to tell FCP where to find them), a search in the manual turns up some information on page 503 about where they should be ...
have a look see if that helps.
R.

[Solved] Openbox's rc.xml error "Extra content at the end of document"

I have a rather silly problem with Openbox.
I'm not a programming genius so, for me, dealing with XML is a pain but I usually manage to get OB's menus and other docs to work. Ive been banging my head into a wall of xml trying to add my own entry to OpenBox's rc.xml file. All I want to add is an Xfce terminal centred on my Twinview desktop. I've done it in the past but right now I can't get the rc.xml file to work. Whenever I re-configure OpenBox I get the following message spit out at me:
Extra content at the end of document on line ###
So far, this is what I've attempted to get this to work:
- I have tried recopying a new rc.xml from /etc/xdg/openbox to my home directory's ~/.config/openbox. I was assuming I'd botched it entirely and started over from the beginning.
- I have cut/copy/pasted the commented paragraph, above my entry, with the same co-ordinates and with the "force position" set to "yes."
-I've googled this error but I only found one or two semi-relevant hits (from this forum no less!) Unfortunately I did not find a fix to the issue or a reason as to why this error crops up
I know that it's probably something that is easily missed but I honestly can't see it. I'm hoping someone on the forum will have run across this issue before and had it fixed. Below is a copy of my current rc.xml.
<?xml version="1.0" encoding="UTF-8"?>

<openbox_config xmlns="http://openbox.org/3.4/rc">
<resistance>
<strength>10</strength>
<screen_edge_strength>20</screen_edge_strength>
</resistance>
<focus>
<focusNew>yes</focusNew>

<followMouse>no</followMouse>

<focusLast>yes</focusLast>

<underMouse>no</underMouse>

<focusDelay>200</focusDelay>

<raiseOnFocus>no</raiseOnFocus>

</focus>
<placement>
<policy>Smart</policy>

<center>yes</center>

<monitor>Active</monitor>

<primaryMonitor>1</primaryMonitor>

</placement>
<theme>
<name>Clearlooks</name>
<titleLayout>NLIMC</titleLayout>

<keepBorder>yes</keepBorder>
<animateIconify>yes</animateIconify>

<name>sans</name>
<size>8</size>

<weight>bold</weight>

<slant>normal</slant>



<name>sans</name>
<size>8</size>

<weight>bold</weight>

<slant>normal</slant>



<name>sans</name>
<size>9</size>

<weight>normal</weight>

<slant>normal</slant>



<name>sans</name>
<size>9</size>

<weight>normal</weight>

<slant>normal</slant>



<name>sans</name>
<size>9</size>

<weight>bold</weight>

<slant>normal</slant>


</theme>
<desktops>

<number>4</number>
<firstdesk>1</firstdesk>
<names>

</names>
<popupTime>875</popupTime>

</desktops>
<resize>
<drawContents>yes</drawContents>
<popupShow>Nonpixel</popupShow>

<popupPosition>Center</popupPosition>

<popupFixedPosition>

<x>10</x>

<y>10</y>

</popupFixedPosition>
</resize>

<margins>
<top>0</top>
<bottom>0</bottom>
<left>0</left>
<right>0</right>
</margins>
<dock>
<position>TopLeft</position>

<floatingX>0</floatingX>
<floatingY>0</floatingY>
<noStrut>no</noStrut>
<stacking>Above</stacking>

<direction>Vertical</direction>

<autoHide>no</autoHide>
<hideDelay>300</hideDelay>

<showDelay>300</showDelay>

<moveButton>Middle</moveButton>

</dock>
<keyboard>
<chainQuitKey>C-g</chainQuitKey>

<keybind key="C-A-Left">
<action name="DesktopLeft">
<dialog>no</dialog>
<wrap>no</wrap>
</action>
</keybind>
<keybind key="C-A-Right">
<action name="DesktopRight">
<dialog>no</dialog>
<wrap>no</wrap>
</action>
</keybind>
<keybind key="C-A-Up">
<action name="DesktopUp">
<dialog>no</dialog>
<wrap>no</wrap>
</action>
</keybind>
<keybind key="C-A-Down">
<action name="DesktopDown">
<dialog>no</dialog>
<wrap>no</wrap>
</action>
</keybind>
<keybind key="S-A-Left">
<action name="SendToDesktopLeft">
<dialog>no</dialog>
<wrap>no</wrap>
</action>
</keybind>
<keybind key="S-A-Right">
<action name="SendToDesktopRight">
<dialog>no</dialog>
<wrap>no</wrap>
</action>
</keybind>
<keybind key="S-A-Up">
<action name="SendToDesktopUp">
<dialog>no</dialog>
<wrap>no</wrap>
</action>
</keybind>
<keybind key="S-A-Down">
<action name="SendToDesktopDown">
<dialog>no</dialog>
<wrap>no</wrap>
</action>
</keybind>
<keybind key="W-F1">
<action name="Desktop">
<desktop>1</desktop>
</action>
</keybind>
<keybind key="W-F2">
<action name="Desktop">
<desktop>2</desktop>
</action>
</keybind>
<keybind key="W-F3">
<action name="Desktop">
<desktop>3</desktop>
</action>
</keybind>
<keybind key="W-F4">
<action name="Desktop">
<desktop>4</desktop>
</action>
</keybind>
<keybind key="W-d">
<action name="ToggleShowDesktop"/>
</keybind>

<keybind key="A-F4">
<action name="Close"/>
</keybind>
<keybind key="A-Escape">
<action name="Lower"/>
<action name="FocusToBottom"/>
<action name="Unfocus"/>
</keybind>
<keybind key="A-space">
<action name="ShowMenu">
<menu>client-menu</menu>
</action>
</keybind>

<keybind key="A-Tab">
<action name="NextWindow"/>
</keybind>
<keybind key="A-S-Tab">
<action name="PreviousWindow"/>
</keybind>
<keybind key="C-A-Tab">
<action name="NextWindow">
<panels>yes</panels>
<desktop>yes</desktop>
</action>
</keybind>

<keybind key="W-e">
<action name="Execute">
<startupnotify>
<enabled>true</enabled>
<name>Konqueror</name>
</startupnotify>
<command>kfmclient openProfile filemanagement</command>
</action>
</keybind>
</keyboard>
<mouse>
<dragThreshold>8</dragThreshold>

<doubleClickTime>200</doubleClickTime>

<screenEdgeWarpTime>400</screenEdgeWarpTime>

<context name="Frame">
<mousebind button="A-Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
</mousebind>
<mousebind button="A-Left" action="Click">
<action name="Unshade"/>
</mousebind>
<mousebind button="A-Left" action="Drag">
<action name="Move"/>
</mousebind>
<mousebind button="A-Right" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="Unshade"/>
</mousebind>
<mousebind button="A-Right" action="Drag">
<action name="Resize"/>
</mousebind>
<mousebind button="A-Middle" action="Press">
<action name="Lower"/>
<action name="FocusToBottom"/>
<action name="Unfocus"/>
</mousebind>
<mousebind button="A-Up" action="Click">
<action name="DesktopPrevious"/>
</mousebind>
<mousebind button="A-Down" action="Click">
<action name="DesktopNext"/>
</mousebind>
<mousebind button="C-A-Up" action="Click">
<action name="DesktopPrevious"/>
</mousebind>
<mousebind button="C-A-Down" action="Click">
<action name="DesktopNext"/>
</mousebind>
<mousebind button="A-S-Up" action="Click">
<action name="SendToDesktopPrevious"/>
</mousebind>
<mousebind button="A-S-Down" action="Click">
<action name="SendToDesktopNext"/>
</mousebind>
</context>
<context name="Titlebar">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
</mousebind>
<mousebind button="Left" action="Drag">
<action name="Move"/>
</mousebind>
<mousebind button="Left" action="DoubleClick">
<action name="ToggleMaximizeFull"/>
</mousebind>
<mousebind button="Middle" action="Press">
<action name="Lower"/>
<action name="FocusToBottom"/>
<action name="Unfocus"/>
</mousebind>
<mousebind button="Up" action="Click">
<action name="Shade"/>
<action name="FocusToBottom"/>
<action name="Unfocus"/>
<action name="Lower"/>
</mousebind>
<mousebind button="Down" action="Click">
<action name="Unshade"/>
<action name="Raise"/>
</mousebind>
<mousebind button="Right" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="ShowMenu">
<menu>client-menu</menu>
</action>
</mousebind>
</context>
<context name="Top">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="Unshade"/>
</mousebind>
<mousebind button="Left" action="Drag">
<action name="Resize">
<edge>top</edge>
</action>
</mousebind>
</context>
<context name="Left">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
</mousebind>
<mousebind button="Left" action="Drag">
<action name="Resize">
<edge>left</edge>
</action>
</mousebind>
<mousebind button="Right" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="ShowMenu">
<menu>client-menu</menu>
</action>
</mousebind>
</context>
<context name="Right">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
</mousebind>
<mousebind button="Left" action="Drag">
<action name="Resize">
<edge>right</edge>
</action>
</mousebind>
<mousebind button="Right" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="ShowMenu">
<menu>client-menu</menu>
</action>
</mousebind>
</context>
<context name="Bottom">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
</mousebind>
<mousebind button="Left" action="Drag">
<action name="Resize">
<edge>bottom</edge>
</action>
</mousebind>
<mousebind button="Middle" action="Press">
<action name="Lower"/>
<action name="FocusToBottom"/>
<action name="Unfocus"/>
</mousebind>
<mousebind button="Right" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="ShowMenu">
<menu>client-menu</menu>
</action>
</mousebind>
</context>
<context name="BLCorner">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
</mousebind>
<mousebind button="Left" action="Drag">
<action name="Resize"/>
</mousebind>
</context>
<context name="BRCorner">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
</mousebind>
<mousebind button="Left" action="Drag">
<action name="Resize"/>
</mousebind>
</context>
<context name="TLCorner">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="Unshade"/>
</mousebind>
<mousebind button="Left" action="Drag">
<action name="Resize"/>
</mousebind>
</context>
<context name="TRCorner">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="Unshade"/>
</mousebind>
<mousebind button="Left" action="Drag">
<action name="Resize"/>
</mousebind>
</context>
<context name="Client">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
</mousebind>
<mousebind button="Middle" action="Press">
<action name="Focus"/>
<action name="Raise"/>
</mousebind>
<mousebind button="Right" action="Press">
<action name="Focus"/>
<action name="Raise"/>
</mousebind>
</context>
<context name="Icon">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="Unshade"/>
<action name="ShowMenu">
<menu>client-menu</menu>
</action>
</mousebind>
<mousebind button="Right" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="ShowMenu">
<menu>client-menu</menu>
</action>
</mousebind>
</context>
<context name="AllDesktops">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="Unshade"/>
</mousebind>
<mousebind button="Left" action="Click">
<action name="ToggleOmnipresent"/>
</mousebind>
</context>
<context name="Shade">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
</mousebind>
<mousebind button="Left" action="Click">
<action name="ToggleShade"/>
</mousebind>
</context>
<context name="Iconify">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
</mousebind>
<mousebind button="Left" action="Click">
<action name="Iconify"/>
</mousebind>
</context>
<context name="Maximize">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="Unshade"/>
</mousebind>
<mousebind button="Middle" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="Unshade"/>
</mousebind>
<mousebind button="Right" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="Unshade"/>
</mousebind>
<mousebind button="Left" action="Click">
<action name="ToggleMaximizeFull"/>
</mousebind>
<mousebind button="Middle" action="Click">
<action name="ToggleMaximizeVert"/>
</mousebind>
<mousebind button="Right" action="Click">
<action name="ToggleMaximizeHorz"/>
</mousebind>
</context>
<context name="Close">
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
<action name="Unshade"/>
</mousebind>
<mousebind button="Left" action="Click">
<action name="Close"/>
</mousebind>
</context>
<context name="Desktop">
<mousebind button="Up" action="Click">
<action name="DesktopPrevious"/>
</mousebind>
<mousebind button="Down" action="Click">
<action name="DesktopNext"/>
</mousebind>
<mousebind button="A-Up" action="Click">
<action name="DesktopPrevious"/>
</mousebind>
<mousebind button="A-Down" action="Click">
<action name="DesktopNext"/>
</mousebind>
<mousebind button="C-A-Up" action="Click">
<action name="DesktopPrevious"/>
</mousebind>
<mousebind button="C-A-Down" action="Click">
<action name="DesktopNext"/>
</mousebind>
<mousebind button="Left" action="Press">
<action name="Focus"/>
<action name="Raise"/>
</mousebind>
<mousebind button="Right" action="Press">
<action name="Focus"/>
<action name="Raise"/>
</mousebind>
</context>
<context name="Root">

<mousebind button="Middle" action="Press">
<action name="ShowMenu">
<menu>client-list-combined-menu</menu>
</action>
</mousebind>
<mousebind button="Right" action="Press">
<action name="ShowMenu">
<menu>root-menu</menu>
</action>
</mousebind>
</context>
<context name="MoveResize">
<mousebind button="Up" action="Click">
<action name="DesktopPrevious"/>
</mousebind>
<mousebind button="Down" action="Click">
<action name="DesktopNext"/>
</mousebind>
<mousebind button="A-Up" action="Click">
<action name="DesktopPrevious"/>
</mousebind>
<mousebind button="A-Down" action="Click">
<action name="DesktopNext"/>
</mousebind>
</context>
</mouse>
<menu><file>menu.xml</file><hideDelay>200</hideDelay><middle>no</middle><submenuShowDelay>100</submenuShowDelay><submenuHideDelay>400</submenuHideDelay>
if this is a negative value, then the delay is infinite and the
submenu will not be hidden until a different submenu is opened -->
<applicationIcons>yes</applicationIcons>

<manageDesktops>yes</manageDesktops>

</menu>
<applications>

<Terminal="Terminal">
<position force="yes">
<x>center</x>
<y>200</y>
</position>
<decor>no</decor>
<focus>no</focus>
<desktop>all</desktop>
<layer>below</layer>
<skip_pager>yes</skip_pager>
<skip_taskbar>yes</skip_taskbar>
</Terminal>
</applications>
</openbox_config>
Thanks in advance to anyone who responds.
Last edited by MoonSwan (2011-07-26 06:22:37)

MoonSwan wrote:I've never heard of a validating editor but I was recently wondering what exists that could help me. Aside from emacs, what should I search for to find one of these validating editors?
You can use whatever tool you prefer - for someone already using emacs, emacs is a natural choice. Simple, easy to use online tools exist e.g. http://schneegans.de/sv/
Just upload the file in question ('Validate by file upload' option) and click 'Validate':
The '=' character cannot be included in a name. (723:10)
<Terminal="Terminal">
^
Googling 'xml validation' should give you some more tools / services if this one is not good enough.

Satellite A105-S3611 Recovery DVD won't boot - reverts to HDD boot

Satellite A105-S3611 Recovery DVD won't boot - reverts to HDD boot.
My laptop has had a virus but is now clean but has some lingering effects. So I decided to use the Recovery and Applications/Drivers Media to reinstall the system to factory settings. Pressing the "C" key at the Toshiba screen did not work to choose the boot divice but pressing F12 did work. The problem is the system still boots using the hard disk. I've gone into the boot process and changed the order of boot devices to make sure the CD\DVD drive is chosen first but it does not boot from the CD/DVD. It looks like it begins to read the DVD but the boot process is not executed from there.
Questions:
1. Can I install the system using windows explorer to execute the autorun.ini on the CD/DVD?
2. Is there another option for getting the system to install from the CD/DVD?
Thank you in advance
Roger

I read somewhere on the forum that updating the BIOS may solve the problem. So I updated the system BIOS from v1.40 to v2.0. Then I reinserted the newly purchased recovery DVD and the boot process began with the DVD booting but ended with the message "WRONG MACHINE".
I ejected the recovery DVD that I just purchased and inserted the recovery DVD that came with the machine. This time the machine booted and installed the factory image of the operating system as it should have the first time.
So I am now recovered and the machine works as it did originally. So the moral of the story is you don't necessarily have to buy the new recovery DVD but just update the system BIOS and then try to use the recovery DVD that came with your machine.

Getting BAM Error: BAM-06008: The XML payload is invalid; extra contents we

Hi All,
Version: 11.1.1.4
We are getting the BAM Error: "BAM-06008: The XML payload is invalid; extra contents were found" after I added a another field to a BAM Object. I can see the new field in BAM and I can also see it when I pull up and map to a BAM adapter in my SOA composite. However, when I have the process send a payload with the newly added field it fails with the above error. However, if I add a new data object in BAM with the field it works fine. What would be causing BAM to think that the newly added field should be in payload?
Any suggestions would be greatly appreciated.
--S

If the layout of the data object changes then you need to restart BAM server for changes to take effect. Also make sure, your mapper file isn't adding extra elements than expected.
Thanks
Jahangir Pasha

BAM-06008: The XML payload is invalid; extra contents were found.

Hi All,
Version:11.1.1.6
We are getting the BAM Error: "BAM-06008: The XML payload is invalid; extra contents were found" after I added a another field to a BAM Object.I have added that extra field to corresponding data objects .wsdl file as well as in the .xsd. I can see the new field in the BAM DO. However, when I used to send a payload with the newly added field it fails with the above error. However, if I add a new data object in BAM with the field it works fine.
Why am I getting this error?
Thanks,
Rahul

I have followed the following steps:-
1.Make entry of new field in ".wsdl" file which is in the BAM folder.
2.Make entry of new filed in ".xsd" file.
3.Make appropriate mappings in ".xsl" file corresponding to the sensor's action.
Initially i was only restarting BAM and was facing above mentioned error. After restarting SOA as well as BAM server, it started working.

How to put dvd movies on to ipod classic

How do you safely put DVD movies on to an ipod classic?

Ripping DVDs requires breaking the encryption on those DVDs, which cannot be discussed here. You'll probably be able to find the answers by looking elsewhere. Sorry.
B-rock

Free movie copier(like to put dvds on my comp)

okay soo im really dumb at putting dvds on my comp so how can i put a dvd onto my computer like copying it??
or
how does everyone else put dvds on their computer?

Dre,
Videora should be used with another program to put DVDs on iPod...
Videora (DVD to iPod)
btabz

Don't know how to put DVD on Ipod

I am new to Quiktime pro, the only reason i bought it was so i could put DVDs on my 5g Ipod. I now have quicktime pro and I don't know how to even put the DVD onto the player. If sombody could please expain this to me.

Shared Files I'll Describe what it says
On the left bar of iTunes It follows as this:
Store
--iTunes Store
Devices
--Ed (my ipod)
--Downer (Cd)
Shared
--The Bush Family
----Creative Commons
----What's New
Windows XP Pro

Putting DVD SP extra content on seperate hdd

Similar Messages

Maybe you are looking for