PUTTING PICTURES ON NANO PLEASE HELP

HEY EVERYONE I JUST GOT A NANO YESTURDAY AND MY COMPUTER IS GAY AND WONT LET ME SEE THE MANUEL SO I NEED HELP!!! HOW DO YOU TAKE YOUR PICTURES FROM YOUR COMPUTER AND PUT THEM INTO ITUNES TO PUT THEM ON YOUR IPOD NANO!!! IF ANYONE CAN HELP ME PLEASE!!! YOU CAN POST IT ON HERE AND PLEASE RESPOND ASAP!!! EVERYONE AND ANYONE!

quit using caps i almost didnt reply
here http://www.apple.com/support/ipod/tutorial/ipgettingstartedt9.html
iPods- 4gb Balck Nano, 60gb Black 5g}{Black Moto Razr}{PSP}{iPod Radio Remote   Windows XP   <img src="http://i36.photobucket.com/albums/e13/superman5656/sm.jpg"align="right

Similar Messages

  • HT4623 my iphone 5 is not getting audio during calls, im not hearing anything unless i put it on speaker. Can you help me is this a software problem its very annoying for every call i dial or recieve i have to put on speaker. Please help me apple please.

    my iphone 5 is not getting audio during calls, im not hearing anything unless i put it on speaker. Can you help me is this a software problem its very annoying for every call i dial or recieve i have to put on speaker. Please help me apple please.

    There's a whole lot to read in your post, and frankly I have not read it all.
    Having said that, this troubleshooting guide should help:
    http://support.apple.com/kb/TS1538
    In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

  • HT201302 please help.. i lost all the data in my ipad after upgrade to ios 702 i want my 3500 pictures back.. please help.. because my i tune also dont have the data

    please help.. i lost all the data in my ipad after upgrade to ios 702 i want my 3500 pictures back.. please help.. because my i tune also dont have the data. please anybody help me...

    Only possible if you have made an iTune or iCloud backup before the update.

  • All Facebook friends profile pictures are missing, please help?

    All of my Facebook friends profile pictures are missing as well as mine. I can see all the photo's that they post to there wall but the little profile pictures are missing?
    I have heard that this has been an issue for some!
    Any suggestions?

    i don't know what happened. i was choosing pictures
    to use in imovie and i started going through and
    doing a little cleaning up in iphoto. i had some
    duplicated photos and was putting those in the trash.
    i then emptied my trash. then when i went to open
    iphoto again, it was like the first time i was using
    it. it asked me if i would like to use iphoto when
    connecting my digital camera and then it didn't have
    any of my photos! where could they have gone?! how
    could my entire library have disappeared? is there
    a way to restore it?
    PLEASE HELP!

  • RANDOM FILES HAVE BEEN PUT IN MY TRASH, PLEASE HELP

    hi,
    ive noticed lots of files, some from desktop, some from other directories possibly, have been put in the trash.
    no idea how.
    this is scary.
    stuff has exploded out of folders and been put in trash. there are no folders in trash, just the files that resided in folders.
    i dont even think i can resore to original folders??
    and some folders are missing from desktop, they are not even in the trash.
    whats going on???????
    please please help.
    10.5.4 macbook black.

    Performance tip: Keep the Desktop clutter-free (empty, if possible)
    Mac OS X's Desktop is the de facto location for downloaded files, and for many users, in-progress works that will either be organized later or deleted altogether. The desktop can also be gluttonous, however, becoming a catch-all for files that linger indefinitely.
    Unfortunately - aside from the effect of disarray it creates - keeping dozens or hundreds of files on the Desktop can significantly degrade performance. Not necessarily because the system is sluggish with regard to rendering the icons on the desktop and storing them in memory persistently (which may be true in some cases), but more likely because keeping an excessive number of items on the Desktop can cause the windowserver process to generate reams of logfiles, which obviously draws resources away from other system tasks. Each of your icons on your desktop is stored as a window in the window server, not as an alias. The more you have stored, the more strain it puts on the window server. Check your desktop for unnecessary icons and clear them out.
    Keeping as few items as possible on the Desktop can prove a surprisingly effective performance boon. Even creating a single folder on your Desktop and placing all current and future clutter inside, then logging out and back in can provide an immediately noticeable speed boost, particularly for the Finder.
    And it is why Apple invented 'Stacks' for Leopard.
    Here is Apple's take on the subject:
    http://www.apple.com/pro/tips/immaculate_desktop.html
    Repairing permissions is important, and should always be carried out both before and after any software installation or update.
    Go to Disk Utility (this is in your Utilities Folder in your Application folder) and click on the icon of your hard disk (not the one with all the numbers).
    In First Aid, click on Repair Permissions.
    This only takes a minute or two in Tiger, but much longer in Leopard.
    Background information here:
    http://docs.info.apple.com/article.html?artnum=25751
    and here:
    http://docs.info.apple.com/article.html?artnum=302672
    An article on troubleshooting Permissions can be found here:
    http://support.apple.com/kb/HT2963
    By the way, you can ignore any messages about SUID or ACL file permissions, as explained here:
    http://support.apple.com/kb/TS1448?viewlocale=en_US
    If you were having any serious problems with your Mac you might as well complete the exercise by repairing your hard disk as well. You cannot do this from the same start-up disk. Reboot from your install disk (holding down the C key). Once it opens, select your language, and then go to Disk Utility from the Utilities menu. Select your hard disk as before and click Repair.
    Once that is complete reboot again from your usual start-up disk.
    More useful reading here:
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck
    http://support.apple.com/kb/TS1417?viewlocale=en_US
    For a full description of how to resolve Disk, Permission and Cache Corruption, you should read this FAQ from the X Lab:
    http://www.thexlab.com/faqs/repairprocess.html

  • Got a new lap top my husband wanted to help me by downloading itunes on it I have not used icloud but do have it on my phone When he pugged it in it asked if he wanted to backup he said yes Then reset my phone now all my pictures are gone please help

    I got a new lap top and my husband thought it would be a good idea to help me by downloading itunes on it. Well Not so much...   I have not used icloud but do have it on my phone and other items. When he pugged my phone in to my laptop it asked if he wanted to backup he said yes. Then it reset my phone and now all my pictures are gone please help

    If your phone was backed up to your computer, the backup would contain your camera roll photos (and videos).  Restoring to this backup would recover them.  However, if it was backed up a second time after losing them, this would overwrite the backup containing the data and your photos would be lost.
    You can try restoring to your backup, but before doing so go to iTunes>Preferences>Devices and check "Prevent...from syncing automatically".  This will prevent the phone from automatically syncing and backing up when you connect it to your computer, thereby overwriting the backup you want to restore to.  After doing this, open iTunes on your computer and connect your phone, then right-click on the name of your phone on the left side of iTunes and choose Restore from Backup.  (If you have iTunes 11 first go to View>Show Sidebar.)
    Again this might work, as long as the phone was only backed up and then not subsequently backed up again after the photos were lost.

  • Import causes me to loose 400 pictures .. Please help

    Hy,
    I have been an Aperture user since 1.0 but now im puzzled.
    I imported my A2 library into A3 trial but i have 400 pictures less than i started with ...
    Situation :
    23000 pictures on referenced raid5 array
    No missing pictures, all online in aperture 2.
    Succesfull import, no crashes
    I have multiple backups so i loose no pictures but could someone help me to explain what happened, if this persists i will not buy A3.
    I will make bug report today as well.
    Thanx and please excuse my bad english.
    Message was edited by: Royemans due to bad spelling

    Nobody ???

  • Non responding nano please help!!

    I accidentally unpluged my nano(1st generation) from my computer without ejecting it first and it froze on the apple screen for a few minutes and then went dead, I couldn't get it to turn on again.I plugged it back into my computer and the apple screen flashed on and off about 4 times and then it went dead again. Now it doesn't respond at all to my computer, it won't connect to iTunes, charge or anything it is completely dead. I tried doing everything it says to do in the troubleshooting. I even tried holding the center button and the menu button at the same time for 6-10 seconds but nothing.I would try restoring it but I can't get my computer to recognize it at all.Im pretty sure it's my nano and not my USB cable too.Please Help!

    Have you tried this?:
    -- Try toggling the Hold switch. Flip the "Hold" switch on your iPod (located on the top) back and forth several times.
    If a "regular toggling" doesn't seem to do anything, try this:
    1 - Connect your iPod to your computer.
    2 - Now begin to rapidly toggle the "Hold" switch back and forth while your iPod is connected.
    3 - After you've done that for a little bit, eject the iPod if needed, then disconnect it from your computer.
    Also, see if these articles help:
    iPod won't turn on
    iPod stops responding or won't wake from sleep
    -Kylene

  • Can't group text or send/receive picture messages! Please Help!

    Hell Everyone,
    so I just recently switched from my Iphone back to my blackberry for simplicity/practical reasons...I couldn't deal with the iphone anymore. In doing so, I came across a problem. I am not able to send group texts or send/receive mms. Everytime I try to do so, the text has a red 'X' next to it showing that it didn't go through. I am currently with ATT and have tried calling them to resolve it but no one knows.
    here are some of the steps I took to resolve it
    1. Resetted to Factory Settings - Did not work
    2. Made sure all the settings in my text message options is selected properly - Did not work
    3. Deactivated iCloud/iMessage on my previous iPhone - Did not work
    4. Called ATT and had them make sure BB Data plan was on my plan, and it was - Did not work
    Can someone please help?
    Thank you,
    Pogos

    Hi and Welcome to the Community!
    With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
    1) Register HRT
    KB00510 How to register a BlackBerry smartphone with the wireless network
    Please wait for one "registration" message to arrive to your Messages app
    2) Resend Service Books
    KB02830 Send the service books for the BlackBerry Internet Service
    Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
    3) Reboot
    With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
    See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Hopefully that will get things going again for you! If not, then you should re-contact your mobile service provider for formal support...be sure to request their dedicated BB support group. MMS is a specific service level that must be properly enabled on BBs in order to function. Often, the first support group you reach will not understand the proper method for configuring this on BB...but their dedicated BB support group will.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Windows AND iTunes wont recognize my nano please help!!!

    This makes no sense!!! my dads computer wont recognize my ipod or charge it up but my moms will and dad has iTunes! please help me!

    If you have also gone through the other applicable steps (and that are possible) in that article, all I can suggest is posting in one of the Category: iPod forums .
    Good Luck!

  • I am trying to recover or change my security question responses as i cannot get the ones i originally put in correct.  PLease help.

    Please help me to figure out how to recover the answer (or change) to my security question in order to make purchases using my itunes account through a new computer.

    Do any of these discussions, from the More Like This section on the right, address your problem?
    I forgot My security question
    Help please! How will I reset or change the answers to my security questions? Thanks
    Password Security
    How i can recover the password of my iPhone´s security copy?
    i can't change the security question, and i don't remember answer for this question

  • My default photo viewer and default jar opener both result in the picture of the  icon getting big and then disappearing without opening a picture/program. Please Help.

    Please help. I have tried redownloading java and attempted to open the jar file with Terminal. Nothing is working.

    First, uninstall "SuperTV" (whatever that is) according to the developer's instructions. It isn't working and it's filling the log with noise.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged before the boot, while the system was unresponsive or was failing to shut down. Please include the BOOT_TIME message at the end of the log extract.
    Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    PLEASE DO NOT INDISCRIMINATELY DUMP THOUSANDS OF LINES FROM THE LOG INTO A MESSAGE. If you do that, I will not respond.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
    Step 2
    Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • HELP!!! My flash video skin isn't showing up or working when i put it into dreamweaver, please help.

    When I export my flash project, and import it into dreamweaver, i go to the trailer page and the video, one, won't give me the skin to hit play, stop, pause, rewind, volume, etc. and two, when you travel to another page it continues to play the movie in the background. Can someone please help me fix these issues please!
    Link: http://ghsglobaltech.guhsd.net/students/2011_2012/web/web_36/Classwork%20Site/Assignments/ hunger-games.html
    >>Click Trailer at top of page to get to the video

    Hi avmary11,
    If your are having issues with your iPod not being recognized by iTunes (but it is being recognized by the computer), you may find the following article helpful:
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/ts1363
    Regards,
    - Brenden

  • HT5622 This has happened twice now but when getting games it gives me no option to put password in. Please help

    This has happened twice now but when getting games it gives me no option to put password in. Please help

    Reset the network settings in Settings/General/Reset and you'll be able again to put in your password.
    Remember that this will reset the passwords for all networks you connected to up to this point.

  • Trouble With Putting Music on New Ipod Nano PLEASE HELP

    I Have had my new ipod nano now since christmas and i still havnt figuered out how to put music on it.
    When i try to download the new Itunes of apple, it says that it cannt complete downloading because i do not have the priviliges even though i am on the administrators account. If i go on my old itunes my new ipod does not apear on the left for me to put music on, Any Suggestions ?? Please!:)
    Message was edited by: Dee123

    Hello and Welcome to Apple Discussions. 
    Try using a USB2 port. If you are already using a USB2 port disconnect any USB1 devices on that port (i.e. if it's got a hub on it).
    Merry Christmas
    mrtotes

Maybe you are looking for