Putting selections on images.

New here.
Ok so I got this photo, from the the cartoon Tim.
It doesnt look HD but its pretty HD. So I want to select the people heads and stuff so then i could move them around and stuff. So far from what I know you can't, you have to get on an editing program and select the stuff and leave no back ground. So just for a test out i selected the guy who's eating a sandwich, i selected his head, mouth, and left eye. Now after  the first time When i got on selections it was only the head. Im kind of thinking now of layers so tell me if I'm correct here : you select a new layer and upload the mouth/eye each one seperate. then i could just select an eye, clicking on the leyer that the eye is one and I have it good now. Ok so thats about it. Just how would I make a little scene out of this?

convert that bitmap to a vector: select it>click modify>bitmap>trace bitmap.
once that's converted to a bitmap you can select (using the lasso) one of the heads along with the eyes and mouth etc.  then convert that to a movieclip.
edit that movieclip and select the eyes and covert that to a movieclip.  select the mouth and convert that to a movieclip.
you are not setup to animate that guy.
likewise for the other guys.

Similar Messages

  • Why can't I select background images in Pages 5?

    So I've got a document with an image of a Gantt Chart, and it's been formatted to be in the background.
    When I try to insert a new page before this image, it overlays the text of another page.
    Trying to find 'select background images' is no where to be found, whereas in Pages 09, it was fine.
    I'm all for simplicity, but removing something like this, and not being able to select this image at all?
    Is there anything I've missed?

    This is not the answer to the original question but it is an answer to a related problem.
    Apparently, Apple removed the simple and useful "Send Object to Background" menu item. For the last half an hour I was straggling to put my signature image under my name in a letter. The image background is white. So, when I insert the image, it is on top of the text and blocking it.
    Then, I searched and found this discussion, it helped but not solved the problem. I found a solution inspired by this discussion. Here, what I tried to send an image to the background.
    Chose the image in question. When I selected "Arrange -> Section Masters -> Move Object to Page" as suggested in this thread, it moves the image to the background. BUT, the image appears on every page at the same position within the section. If the document is a single-section document (almost all my documents are single-section documents, as I use Pages for short simple documents like letters (in the near future, I'll say "I used to use Pages", as this kind of feature removal makes it unfeasible to use it anymore).
    Thus, you have to define a new section which should contain only the page in question. Enough rumbling! Here is exactly what I did:
    Let N be the page number on which you wish to put an object in the background.
    Go to page N (your cursor must be somewhere on that page)
    On the toolbar choose "Setup -> Section Tab -> Create a new section -> Starting with this page"
    Go to page N+1
    On the toolbar choose "Setup -> Section Tab -> Create a new section -> Starting with this page"
    Now, you have a single-page-section on page N.
    Put you object on page N
    Select the object (image)
    On the menu, choose "Arrange -> Section Masters -> Move Object to Page"
    Also, I recommend to enable by "Arrange -> Section Masters -> make Master Objects Selectable"
    You can put any number of objects on page N by repeating on steps 5 to 8.
    The problem is, however, if you continue to edit your document and and sections gets longer, it will start a new page at the end of that section. Which is awful, because you'll have to remove the sections, and start from scratch, or manually move the text from one section to the other. So, do this after you are done with the document. Pity!
    If anyone have a better solution it will be appreciated.
    -- o --
    Now, I will continue to nag, if you allow me. When I open an old Pages document with images in the background, it opens just fine. It is not selectable as the original author stated. This indicate that Pages still support background objects independent of the sections, it just doesn't offer in interface to that facility. Why?
    I had a fairly large number of letters and templates I created with Pages. Before it is too late, I'll abandon it.
    I have a similar experience with iWeb. Apple promoted it, and then abandon it. Now all of my class pages (http://web.boun.edu.tr/akdogan) look too 2000s style, but I don't have energy to convert them something else at this point, but I'll have to.
    So I will continue to use LaTeX for long documents (that has been the choice for a long time), but I'll switch back to almost equally annoying Word for short and medium documents.
    Again, pity! I used to like Pages.

  • Preview: Preview Next or Previous Image w/o 1st selecting multiple images?

    I have a folder that contains images. I browse to that folder and click on any of them and Preview opens and I see the image just fine. I would like to browse the contents of this folder with Preview using the arrow keys to view the next or previous image in that folder. When I use the arrow keys I get nothing (just a boink sound). Should I be able to navigate the contents of a folder with Preview using the arrow keys? I have read through the help and didn't see anything not being able to navigate images.
    I edited my preview toolbar to include the Next and Previous buttons however these don't seem to work for images in the same folder.
    I click on drawer and it only shows the image that I clicked on that opened Preview; it does not show any of the other images that are within the folder...should it?
    If I select all (or more than one) image within the folder and then Click Open, Preview opens with the drawer containing the selected images. When I take this extra step, I am able to navigate the selected images in Preview with the up/down arrow keys or the Next/Prev buttons on the toolbar. Is there a way to bypass the multiple selection of images in order to navigate them with Preview or is that just the way it works?
    THx!
    Intel iMac   Mac OS X (10.4.9)  

    I have a folder that contains images. I browse to
    that folder and click on any of them and Preview
    opens and I see the image just fine. I would like to
    browse the contents of this folder with Preview using
    the arrow keys to view the next or previous image in
    that folder.
    ReidRik_Von,
    I suspect you may be "putting the cart before the horse." Try opening Preview first. Next, use the Open command from Preview's File menu, or Command + O on your keyboard, and then browse to the desired folder. Select the entire folder and press the Open button. If the Drawer opens and you find it obtrusive, close the Drawer.
    You should now find the Next and Previous arrow buttons you added to the Toolbar earlier should function; and if you have Full Keyboard Access enabled, you should be able to navigate the folder using the keyboard as well: Command + Right arrow for the next image, or Command + Left arrow for the previous...
    Good luck!
    Andrew99
    iMac 1 GHz Flat Panel 15" PPC 768 MB RAM   Mac OS X (10.4.9)  

  • "Unavailable master images cannot be exported.The selected master image is either offline or not found. Please reconnect it and try again."

    I have imported my iPhoto library onto Aperture, and then deleted the iPhoto library so not to have any duplicates. Now, the images on Aperture are pixelated and when I try to export them the following message appears: "Unavailable master images cannot be exported.The selected master image is either offline or not found. Please reconnect it and try again."  What does this mean? How can I get my photos "online" so that I can see them as they used to be?

    How did you import your iPhoto Library? I assume, you used "File > Import > iPhoto LIbrary", but how did you set the "Store Files" pop-up menu?
    If you chose to "Store Files in their current location", then you did not actually import the master image files into Aperture, but referenced them inside the iPhoto Library. In that case, you just deleted all your images, when you deleted the iPhoto Library. And if you did that, and your iPhoto Library is still sitting in the Trash, put it back; then your Aperture Library should work again. Or restore the iPhoto Library from your most recent backup and put it into the exactly same location where it used to be.
    If you used a different "Store Files" setting, please explain where you have chosen to store the master image files. This will help to track down your images.
    After restoring your master image files you may need to reconnect them to the versions. Post back, if you need help with that.
    Regards
    Léonie

  • Cannot select multiple images in iPhoto '08?

    What am I doing wrong? I want to select multiple images to either print several on a page, or publish to a gallery, but for the life of me I cannot find a view which shows me all photo thumbnails or all thumbnails in an album or all in an event. I can spin the mousewheel to singly go through them, or I can hit edit and go to full screen where I get a thumbnail bar and can select multiples and view them at the same time, but printing or publishing this selection only recognizes the first photo as selected. If I try to select View>Thumbnails, the subsequent menu options are grayed out, and the top one is "hide" even though I see no thumbnail bar. Is there something very obvious I'm missing, or has something gone awry and I should reinstall?
    <Edited by Host>
    Any one can help them?
    Thanks

    There's a slider down right of the iPhoto Window - drag it left.
    Regards
    TD

  • TWO CRITICAL BUGS: 1) File, "Save Page As" and 2) right-click the picture and select "Save Image As", both do not work at all in Firefox 27, 28, and 29!

    Note: capitals are used only to highlight important words.
    PLEASE, TAKE THESE COMMENTS ON TWO CRITICAL BUGS VERY SERIOUSLY BECAUSE THE BUGS DESCRIBED BELOW ARE SO CRITICAL THAT I CANNOT USE THE LATEST VERSION OF FIREFOX UNLESS THEY DO NOT APPEAR IN THE LATEST VERSION AND THEREFORE I AM FORCED TO REVERT BACK TO FIREFOX 26.
    I have Windows 7 64-bit and Firefox 26. I could not install Firefox 27, 28, and 29 due to the persistent presence of the two critical bugs described below. I have 8 GB of RAM and an Intel quad-core processor and a lot of hard disk space available.
    I installed Firefox 27 and then Firefox 28 a while back and these two bugs described below were still present and now I have just checked again with Firefox 29 by installing it and yet again, these two bugs described below are present!! UNBELIEVABLE THAT THESE TWO CRITICAL BUGS ARE STILL PRESENT IN FIREFOX 29 WHEN I CLEARLY INFORMED YOU ABOUT THEM IN THE HELP, SUBMIT LINK OF FIREFOX!!
    I am forced to revert to Firefox 26!
    First, I use Windows 7 64-bit and I always use Firefox with at least 120 tabs opened. BUT I have 8 GB of RAM, an Intel core i7 quad-core processor and more than 1 TB of hard disk space. Consequently, I do not understand why I would have these two critical bugs.
    With Firefox 26, I also have at least 120 tabs opened when I start Firefox and I do not have the two critical bugs described below, therefore I do not believe that the number of tabs is the reason of the two critical bugs that are present in Firefox 27, 28, and 29.
    ---FIRST CRITICAL BUG:
    When I open ANY web page and do File, "Save Page As", the window that is supposed to open to locate the folder where I want to save this web page does NOT open at all, even if I wait a long time to see if it opens.
    Same problem happened with Firefox 27, 28, and now 29!! When I reverted back to Firefox 26, this problem did NOT happen anymore!
    ---SECOND CRITICAL BUG:
    When I use Google Images, for instance entering model in the search field of Google Images and then pressing enter.
    Then I select any picture, open to a new tab this selected picture, then open a new tab by selecting the option View for this picture. Then right-click the picture and select "Save Image As".
    Again, the window that is supposed to open to locate the folder where I want to save this picture does NOT open at all, even if I wait a long time to see if it opens.
    Same problem happened with Firefox 27, 28, and now 29!! When I reverted back to Firefox 26, this problem did NOT happen anymore!
    ---THESE TWO CRITICAL BUGS DO NOT APPEAR WHEN I USE INTERNET EXPLORER 11.
    I have no idea if you will be able to reproduce these two critical BUGS but I can assure you that they are not present when I use Firefox 26 and they are present when I use Firefox 27, 28, and 29. More, be aware that I have at least 100 tabs opened but I also have this same number of tabs opened in Firefox 26 and yet I do not experience these two critical bugs when I have Firefox 26!
    Once again, these two bugs touch at two vital, critical very basic functions of Firefox and therefore I will NOT be able to use any version above 26 if these two bugs are still present, as they are present in Firefox 27, 28, and now 29!!!
    Please, make it a priority to solve these two critical bugs. Thanks.
    I did read a post related to the same issues “Firefox stops responding when trying to "save page" or "save image" | Firefox Support Forum | Mozilla Support” at https://support.mozilla.org/en-US/questions/991630?esab=a&as=aaq
    I am still reading it again to try to figure out exactly what the person did to make his problems be solved, as the post is not clear at all on what solved the problems!
    In any case, all the suggestions proposed in this post do not work and I surely cannot do a system restore when it is obvious that the two bugs do not appear in Internet Explorer.

    First, I sent an email to the author of PhotoME to inform him of the serious issues his addon caused with Firefox latest versions.
    Now, for those of you who do not have the PhotoME addon and yet experience the same problem that I had and that I described above, I suggest the following strategy.
    As PhotoME did cause these problems with Firefox latest versions, I am pretty covinved other addons probably might cause these problems too. Therefore, adopt the following method.
    Test one addon at a time to see if this particular addon is behind your Firefox issues like the ones I had.
    So, disable one addon only at a time. Then close your Firefox and restart it from scratch and see if you still have your Firefox problems. You must restart the Firefox browser from scratch. If you still have these Firefox problems, re-enable the disabled addon, restart your Firefox (again!) and repeat the same method for every single addon that you have.
    Try to be selective by choosing first addons that are more likely to cause your Firefox problems such as not very well-known or not very popular addons (like it was the case for the PhotoME addon).
    If this method works or if it does not work, report it on this web page so that others can be helped with your comments.
    I hope this method will help you because I was really upset that I had these Firefox problems and I first thought it was the fault of Firefox, only to discover later that this PhotoME addon was the culprit and had caused me such upset.

  • Unable to select an image with right click of the mouse

    When in Library mode using grid view, right clicking on a thumbnail does not select the thumbnail, and previously selected items remain selected. If you then try to delete the item, you can inadvertently delete multiple items that you did not intend to delete and not the item you wanted to delete.
    Right clicking on an already selected image or one of a group of selected images works and all selected images can be deleted. However a right click on a non selected image should should drop any current selections and select only the image clicked. (This can be verified in Bridge)
    I am using Lightroom 1.3.1 in Windows XP SP2 with 2 gig of ram.

    Have you switched your mouse buttons i.e have you changed assignments to your mouse buttons in the control panel?
    If not, then clicking on an image will select it, CTRL-Click will select non-contiguous images, SHIFT-Click will select contiguous images.
    Right-clicking will show a context menu. (and the context menu will change if you have single multiple images selected: e.g if you select two images you will see a menu item Open in Compare that is not there if only a single image is selected, Delete Photo... becomes Delete Photos... etc)
    Also, in grid or filmstrip view you will see up to three levels of brightness on the frames around thumbnails:
    -lightest frame: the active image i.e. the one that will be opened if you go to develop mode, or will be used as "source" for synchronize command etc
    -medium: other images that you have selected.
    -darkest: images that are not selected.
    Selected images will also have a white frame immediately around the thumbnail.

  • How do I select multiple images in pages

    In Apple works drawing it was simple to select several images by click and dragging a box over some images and they were all selected at the same time. Now I only get a pointer arrow when over an object at all other times I get an I bar. Am I missing something?

    Thanks Peter,
    That works fine , however as it was simpler in Apple Works with only one hand needed, I had wondered if it could be done in pages. I still have Apple Works on a desktop and it is a pleasure using it for class room posters and the like. Pity was that pages (which I love) does not have all the functionality that AW had

  • Putting two separate images side by side in the same document

    Hello
    I'm new to the community and hope I'm posting this question in the right area.
    I've downloaded the 30 day free trial of Photoshop CC 2014 and I'm attempting to put 2 separate images side by side in the same document based on an instructional video I watched on Lynda.
    I know of one way to do this but, the Lynda's instructor method made things look so much easier and quicker to do.
    He didn't create a new canvas or make any image size adjustments.
    He basically imported 2 images, used the move tool to drag the open image and drop it in the the tab heading of the other image.
    After doing that, he ended up with two layers, the background layer and the "layer 1" layer.
    He then was able to use the move tool again to position layer 1 in the document and then use the expand all option (I think it was) so both images were visible side by side.
    He moved the layer 1 layer to the far left that it almost wasn't visible and that's why he used the expand all function.
    The problem I'm running into is, I'm not getting the "layer 1" after doing the drag and drop.
    The only layer I have is the background layer.
    The odd thing is, that was the only layer he had as well after he did the drag and drop.
    But, after he gave the tip of holding the shift key while the drag and drop was being done to center the images, it was then, the layer 1 layer appeared in his layers pallet.
    I tried holding the shift key as well and I still can't get the layer 1 to appear.
    I've watched the video a few times to see if I missed something he did and i can't see that I have.
    How do I get layer 1 to appear so I can complete the rest of the process described in the video?
    If any members here have full access to the Lynda videos, this is the one I watched:
    The instructions for this particular process is about half way through the 4 minute video.
    I've sent basically the same question to Lynda but it could take up to 3 business days for a reply and I was hoping someone here might have an answer sooner.
    Watching: 
    Combining multiple images together as layers
    From:
    Photoshop CC for Photographers: Fundamentals
    with Chris Orwig

    Trevor,
    Fleming doesn't want to extend the canvas, mind you.
    P Fleming wrote:
    He didn't create a new canvas or make any image size adjustments.
    He also doesn't want to drag layers but drag image tabs. 
    And the video tutorial ends up with two different images on top of each other, contrary to his initially desired "side by side" arrangement.
    It's all for the birds, IMO.             

  • Lost ability to select multiple images easily in Organizer

    I have always been able to select a range of photos by clicking on the first and then Shift-clicking on the last photo in the range.  Everything in MS Windows and almost all Windows apps work this way.
    Suddenly, I can no longer even select an image by clicking it in Organizer.  The only way to select is to drag a rectangle around the particular photo until it's selected.  The only way I can select more than one is to hold down the CTRL key while dragging selection boxes around additional files.  The only way I can select a range of photos is to laboriously CTRL-drag-select each one individually.
    What in the world happened?  I cannot see anything in Preferences that applies to this situation and searching on the keywork, "select" turns up nothing applicable.
    Thanks.
    Ron

    Hi Ron
    Open Organizer and press Ctrl+K to bring up preferences.
    Along the bottom row of buttons try clicking the one to the left “Restore Default Settings”
    Close the program and re-open it. See if that works.

  • Cannot select multiple images

    I click on the first image, and then hold the shift key and click on a second image, but it only selects the second image.  This used to work!

    Here's the keyboard issue.  It was my error.  Nothing wrong with the
    program or computer.
    I use mouse without borders.  That let's me use one keyboard and mouse
    between multiple computers.  My main keyboard was pointing to my work
    computer.  The Wacom tablet was being used to select the images on my
    Lightroom computer.  I should have been using the keyboard on my Lightroom
    computer.  That's why holding down the shift key on the work computer was
    not allowing me to select images on the Lightroom computer.
    Like I said before.  Total user error.
    Alton

  • Selecting multiple images to edit the source code

    Hi. Does anyone know if there's a way to select multiple
    images in a table and change there source code. The reason why I
    ask is that I recently decided to organize my assets folder by
    adding subfolders. Naturally, this makes my images appear as broken
    links. It's a pretty big site that I'm working on and I would like
    to know if there is a faster way than just selecting them one by
    one.

    If you would have created the folders within DW itself (file
    management), and moved images from one
    folder to the other, the links would have been adjusted
    automatically. Carrying out changes like
    this outside of DW will create broken links as you have
    found.
    Did you backup the original site, if so, and have a lot of
    broken links, it maybe worthwhile, going
    back to the original and use the file management to
    rename/create new folders and move your assets
    that way.
    Nadia
    Adobe® Community Expert : Dreamweaver
    Unique CSS Templates |Tutorials |SEO Articles
    http://www.DreamweaverResources.com
    CSS Tutorials for Dreamweaver |
    http://www.adobe.com/devnet/dreamweaver/css.html
    "lordcornwallis" <[email protected]> wrote
    in message
    news:gpqni2$3io$[email protected]..
    > Hi. Does anyone know if there's a way to select multiple
    images in a table and
    > change there source code. The reason why I ask is that I
    recently decided to
    > organize my assets folder by adding subfolders.
    Naturally, this makes my
    > images appear as broken links. It's a pretty big site
    that I'm working on and
    > I would like to know if there is a faster way than just
    selecting them one by
    > one.
    >

  • How can I put a background image in headers in PAGES

    It seems I cannot put a background image in headers. I want a background gradient to go behind the text. I have to place it on the "page" "behind" the header on every sheet instead. Other than creating a graphic that is both (bitmapped) text and image, what can I do? Or is there some way to create an object that has edittable text over the image. Thanks, Peter

    If you are referring to Pages app, it is easy:
    Open your document
    Go to Menu >> View >> Show Layout
    You will see headers, body and footers laid out with edges
    Click inside the header
    Open  your Media browser
    Drag your graphics (or photo) into the header
    Be sure to PRESS AND HOLD COMMAND (APPLE) KEY while you do this!!!
    If you don't pres the key, the picture will be pasted outside the header!
    I think the Command key press was what was screwing you up here...
    This applies to Numbers and iWeb as well, BTW

  • Every time I right click on an image and select Download image Firefox crashes . I have reinstalled; uninstalled and deleted folders and then reinstalled; added

    Every time I right click on an image and select Download image Firefox crashes . I have reinstalled; uninstalled and deleted folders and then reinstalled; added no plugins; checked I can DL the same images in IE-works good.I use Win7 pro and it works in other profiles in Windows 7. I created a new profile in Windows and that worked for about 2 months and now that has gone the same way as my admin profile has done. I deleted the sqlite download file-still same prob..Please help. I use Firefox 13.0.1

    That sounds very frustrating.
    By the way, does it say "Download image" or "Save Image As"? Just checking whether you have an add-on downloader in the mix that might be relevant. If you do have an add-on, try using the built-in command.
    Do you also crash if you save from here:
    right-click page > View Page Info > Media tab > (select image) > Save As
    I assume you have seen this article and tried these things: [[What to do if you can't download or save files]].
    Have you tried the new Reset feature in Firefox 13? This duplicates certain key data from your active settings folder into a new one, bypassing some add-ons and custom settings. Your plugins will still be active, but could be disabled manually if you like.
    More information in this article: [[Reset Firefox – easily fix most problems]].
    If the new settings folder has the same problem, you can switch back if you like using Firefox's Profile Manager.
    Does it make any difference?

  • How do you select an image that is in a text box?

    Hi There, I am trying to select the image which is inside of the text box. Since I upgraded to Yosemite, I cannot figure out how to do this. If I click and drag the mouse over it, I can select both the text box and the image, but I only want to select the image. Thank you so much!

    Pages v5.2.2 on Mavericks, and v5.5.1 on Yosemite do not give you keyboard or pointer access to the image in a Text Box. There is no alignment or distribution control on the image either. No notion of background/foreground. The Text Box really just acts as a viewport for the image. If the image is in the correct aspect ratio, you can fill the Text Box with the image, otherwise it will clip the image.

Maybe you are looking for