Putting the screen to sleep

I have set the screen to go to sleep at 20 minutes after the last activity, and the screen saver to activate after 3 minutes. The screen saver works but the sleep function doesn't (the screen saver keeps on saving!). Am I missing something in the setup? Does syncing have anything to do with this (I wouldn't have thought so)?

Hello Colin41
A few other folks are also having an unexplained issue with certain ScreenSavers be for sleep, to test disable the screensaver and set the Display to 5 or 10 min's.
Something else you can do to extend the life of your display is go to: "System Preference / Exposé & Spaces / Exposé" and set an "Active Screen Corner" to "Sleep Display" then to instantly sleep the display just park the mouse pointer in that corner!
Just my opinion, screensaver's are for show and don't save anything, they do not save the display or (power) energy. Set your Display to sleep after 5 min's and use an Active Screen Corner to sleep the display when your away for a short time!
Dennis

Similar Messages

Putting the screen to sleep but not the plasma...

I have found a great little app that turns the screen off on my new imac it also turns the plasma screen off that is attached to the video outl..any way to stop that.
I am trying to run a looped video from the imac to the plasma without the imac screen being on at the same time.

Hi...have you found a solution to stop the monitor of your iMac while playing a video on an external monitor? i have the same problem.
p.s. sorry for my poor english

Apple 10.7 lion - macbook does not turn off when plugged in. I put the laptop on "sleep" or close the screen and the computer stays on and stays hot! This has been happening ever since the upgrade to Lion! Is there any way to fix this? FIX THIS!!! MY MACB

Apple 10.7 lion - macbook does not turn off when plugged in. I put the laptop on "sleep" or close the screen and the computer stays on and stays hot! This has been happening ever since the upgrade to Lion! Is there any way to fix this? FIX THIS!!! MY MACBOOK GETS TOO HOT WHEN I CLOSE THE SCREEN BECAUSE OF THIS ISSUE!!!! FIX THIS NOW!!!FIX THIS NOW!!!FIX THIS NOW!!!FIX THIS NOW!!!FIX THIS NOW!!!FIX THIS NOW!!!FIX THIS NOW!!! This only happens when it is plugged in!!!!! Any way to fix this? Help.. :-( Please!!!!!!!! The light stays solid when plugged in on sleep mode!!! This *****. Help..

I figured it out! I don't fully understand why, but when I uninstall ESPOINAGE 2 from my laptop, sleep works fine now.. Weird!

My mac book air doesnt turn off and if i put the screen down doesnt sleep

My mac book air doesnt turn off if i click on shut down . it is not sleeping either. if i put the screen down it keeps turning on and the apple logo keeps blinking. it only turns off if i press the power button for few seconds . Please help. Another thing is condensation . i opened my mac 2 days ago there was water on keys and on the screen I guess extremes of temperature caused moisture to develop. What seems to be the issue with its turning off and sleeping. Thank God the water didnt short circuit it. Its still working but just not sleeping or shutting down normally. Please help needed. I love my MAC and cant afford to loose it ! HELP !!

You will want to show it to an AASP to have it checked.

Macbook to TV, Works fine until I put the Macbook to sleep then tv display

Macbook to TV, Works fine until I put the Macbook to sleep,
I wake the Macbook with external keyboard and the display shows up on TV just fine for a second or two then it looks like something changes and then it starts rolling.
It does not do this when Macbook is awake it only does it after it's put to sleep.

Probably the resolution is switching from a mirrored resolution to some other resolution that the TV can't work from. Try this; shut down the MacBook. Cable up the TV to the MB and also the external keyboard and mouse. Hold down the Shift key on the external keyboard, hit the start button on the MacBook and immediately close the lid on the MB after you've hit the start button. Continue holding the Shift key down on the external keyboard until you see the grey screen with the spinning gear at which time you can release the Shift key. The MB should now finish starting up in Safe mode with only the external screen being on. Hopefully the screen will not be rolling.
Once the MB finishes booting, go into System Preferences/Displays and set the resolution to the optimal/desired resolution for your TV. Hopefully this choice will stick through subsequent restarts and also correct the issue of the rolling screen under the conditions in the scenario you described.

"Allow power button to put the computer to sleep" setting is not available but button does it anyway

This has never happened before. Computer stayed at gray screen with no progress wheel so I held the power button to shut it down. Since startup afterwards the power button sleeps the computer. There's no "allow power button to put the computer to sleep" choice available in Energy Saver but button does it anyway. Is there a defaults command that will fix it? Something else?

I've had Mavericks for a week and a half. I don't believe yesterday could have been the first time I used the power button in an attempt to get the Restart Sleep Cancel Shut Down box, but I've been around long enough to know that memory will fool you.
Yours 'til it doesn't,
llee

How to put the display to sleep in Mac OS Lion using keychain?

I use to be able to turn off my displays by hitting "lock screen" in keychain access in Snow Leopard. Now, when I hit it in Lion, it goes to screen saver. It was great being able to turn off the display at night, before going to bed.
Anyone know a work around WITHOUT going to System Preferences -> Desktop & Screen Saver -> Screen Saver -> Hot Corners... -> Pick a corner -> Select "Put Display to Sleep"? I do not want to use hot corners.
I want to lock computer using keychain and the displays go to sleep.
Hopely someone knows of some plist that can be written to-to put the display to sleep.

windmarble wrote:
I use to be able to turn off my displays by hitting "lock screen" in keychain access in Snow Leopard.
Really? Want to show me that button or setting that allows that? AFAIK, System Preferences->Security->General->is where you set that when the machine sleeps or screensaver activates. Accordingly, I'm only aware of a hot corner triggering those two options and the behavior remains the same in Lion, even though the prefPane's name is slightly changed.

Putting the Mac to sleep with the remote

One of the recent Mac tips involved using the remote with Keynote to put the MBP to sleep.
Well, being curious, I decided to see if it worked outside Keynote, and it does!
Just press the large round button in the center of your remote and hold it.
Within a very short time an interesting "snooze" icon appears in the center of the screen and then the MBP enters into the arms of Morpheus.
I have never seen this icon before - it is a graphic representation of the remote itself!
Pressing any button on the remote reawakens the computer.

I have been using the remote as a volume control since I got my first MBP, but I just found out about this sleep thing yesterday.
I have one of those RadioShack IR extender systems around the house so I can control my sound system and TV, but it also works with the Mac remote, so I can turn the volume up or down from another room, which is convenient when using the AirPort express WiFi unit to drive remote speakers in another room.
Now, I can remotely put the MBP to sleep.
As an interesting prank, I can take the remote with me when I visit friends with MBPs and put their computers to sleep on them, since few know that it's possible with the remote.

Creating keyboard shortcut to put the computer to sleep

I am trying to find out the command to run to put the computer to sleep in the same way as when I press System-->Shutdown-->Suspend in my MATE desktop.
I can send the computer to sleep using systemctl suspend and resume with no problems.
However the behavior is slightly different than pressing the "Suspend" button in that the screen is not locked when I awake the computer from sleep.
What should I write to lock the screen and put the computer to sleep, so that I am asked the password when I resume it?
Thanks a lot in advance for the help,
Cheers,
Luca

Thanks monodromy and allonsy for the answers.
Finally I discovered that the way you lock the screen in MATE is with the command:
mate-screensaver-command -l
I'll try to create a service "lockscreen" as proposed by jason and will post the solution to close the topic!
Thanks for the help guys!

My iTunes v.10.6.3.25 is intermittently refusing to open. Sometimes re-booting my laptop works, sometimes not. I just put the computer to sleep, and when I woke it up, iTunes started automatically. Any thoughts?

My iTunes v.10.6.3.25 is intermittently refusing to open. Sometimes re-booting my laptop works, sometimes not. I just put the computer to sleep, and when I woke it up, iTunes started automatically (I had been trying to open it just before by clicking on a song file in my Documents window, and that's the song that started playing when the pc woke up). I went to my iTunes Help and clicked Updates/download iTunes 10.7 twice, but got nothing. Now, Im wondering if I should downloacd the entire 10.7, or whether that would overwrite all my files, erasing my songs. Anybody know? Thanks.

Hey thanks for replying.
Here's what I did:
First I tried the Winsock reset in the Command prompt. Nothing changed.
Next, I tried the instructions on http://http://support.apple.com/kb/TS4123. The only other program that came up on the 'Winsock Providers' tab on the program was 2 Windows Live applications, which I can do without. So I deleted all Windows Live Applications.
I did the Winsock reset in the Command Prompt again and rebooted my comp.
Unfortunately, nothing has changed. iTunes keeps freezing at various stages of the sync, then shows the candy cane-striped bar with either the words 'Finishing sync' or 'Cancelling sync', before showing the Apple logo.
Sometimes, iTunes gets to the syncing stage - "Copying # of ####" - where it will trudge through the first, second and third tracks before flashing "Copying 4 of ####" for a split second and I catch "Cancelling sync" briefly before the Apple logo appears.
Again, I've repeated the steps I mentioned in my previous post. Does ANYONE know when the new version of iTunes is set to be released?! This one is driving me INSANE, to say the least!!

I have an Ipod touch 2nd generation 8gb. Metal peice fell out from the inside where the home button is and I lost it. Put the screen plug in and put the screen on and it would turn on but it won't unlock or respond to anything I try to do. PLEASE HELP ME!

I have an Ipod touch 2nd generation 8gb. Metal peice fell out from the inside where the home button is and I lost it. Put the screen plug in and put the screen on and it would turn on but it won't unlock or respond to anything I try to do. PLEASE HELP ME!!!!!!!!!!!!!!!!!!!

Look her and it may give insite on what is missing. Otherwise:
Apple will exchange your iPod for a refurbished one for $99. Likely not worth it for a your iPod. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Repair it yourself if you are up to it
iPod Touch Repair – iFixit

Do you have to put the sensor to sleep after every work out?

do you have to put the sensor to sleep after every work out?
Windows XP

No, when the sensor is not moving the battery is not being used. (Of course, you should not be wearing your running shoes all day long.)

How Put the computer to sleep with a "F key?

Hi,
How do you Put the computer to sleep with a "F key?
I do remember seeing a version of osX where there was a (say) "F2" key next to the Apple>Sleep pull down menu.
with 10.2.8 or 10.3.9 is there a way to set up a "F" key instead of using the pull down menu?
I looked into the system preferences> keyboard & mouse but no luck. The sys Pref> keyboard & mouse is different on 10.2.8 that on 10.3.9.
An neither one has an option to use an F key to put to sleep.
help!
Michel

Not an F key command, but here's a keyboard command.
http://www.apple.com/pro/tips/quicksleep.html
 Cheers, Tom

I am having issues with MLBtv, when I switch on my ATV it no longer comes up as an option nor does vimeo or the iTunes store, i've tried resets etc and after those they appear. put the tav into sleep mode and mysteriously they don't re appear. Any ideas?

I am having issues with MLBtv, when I switch on my ATV it no longer comes up as an option nor does vimeo or the iTunes store, i've tried resets etc and after those they appear. put the tav into sleep mode and mysteriously they don't re appear. Any ideas?

I am having the same issue but mine is with Netflix. And there are only 4 categories now on the main menue when there used to be 5. Something went crazy with ATV software.

Regarding putting the computer to sleep.

Hey everyone. This is only my second question on Discussions, and I really apologize if the answer to this is dead obvious, but I'm having a minor issue...
I was under the impression that the use of Time Machine would allow you to simply plug in your external, and let Time Machine basically take care of the rest. I haven't actually had a problem there. It works great on backing everything up, but what I'm not sure of, is if I'm using the application properly AFTER it finishes with it's backups. I'm on a new 21.5" iMac, and I'm using a SimpleTech S320U 320gb External Hard Drive. Now, I rarely, RARELY, ever shut my Mac down. Rather, I often put it to sleep. However, if I leave the external plugged into the computer, and put the computer to sleep, once I wake it back up I receive the message that my storage device was not unplugged properly.
This has lead me to manually ejecting my external every time I want to put my iMac to sleep, and I was just wondering if this is normal procedure. Again, apologies if the answer is completely obvious... thanks for any help in advance.

Harmz
Generally it is not a good idea to leave external drives plugged in when putting the PowerBook to sleep as they can prevent the PB from either going into or waking from sleep properly. Personally I think USB devices also have a greater tendency to be problematic than a FireWire equivalent.
I haven't had such problems, but then I always unmount external drives if they are not being used.
Take a look at this Apple document for more info.
2.0GHz MacBook, 15" 1.25GHz/12" 1GHz PBs, 2xPPC Mac minis, 12" iBook G4, Mac OS X (10.4.8) Cube, 2xTAMs, iPod 4G & nano 2G, 1G & 2G iPs, AEBS, AX

Putting the screen to sleep

Similar Messages

Maybe you are looking for