Putting time and dates on pictures

does anyone know how to put time and dates on pictures that are being taken?

Without knowing what exactly is the difference it is difficult to "advice on what PSE9 is doing". Can you post what is the "correct" date on the photo in the camera and what is the date now in PSE. I would expect some time difference between the two because the timezone may be different in the camera and the timezone on your computer might also be different but correct t because of auto-update in computers using the Internet.
To give you an example, if your timezone is Central Time (US and Canada) then 10:00 hours on your photo will have a different time when moved to a computer with timezone set in Dublin, London, Lisbon or Edinburgh. the difference will be 6 hours. Apart from this I can't think of anything else.

Similar Messages

IPhoto time and date problem

I cannot change the time and date on pictures just imported. So far I am back to 1795. Is anyone else having this problem?

Try boot into Safe Mode and try again.

How do I add a time and date stamp onto my pictures?

Can anyone tell me how to place a time and date stamp on all my pictures?

DTRAND wrote:
How do I go about creating a script, how do I run it, and where do I run it
(ie: exactly the steps)... sorry I am new to this.
You don't need to learn scripting. Just ask in the scripting forum if they can help you.
They will point you to an existing one or might even do one for you.
http://forums.adobe.com/community/photoshop/photoshop_scripting

How do i turn on the time and date info on my iphone camera?

My old iphone, when i would upload the photos to my computer and i would put the mouse over the photo it would have time and date information. I just had to have it replaced so I uploaded some photos from the new one and it did not have this information. How do I turn that feature on so i can have that information inbedded in the photo information?

Hi,
if you are using PC then you can go to the picture then press right click on it then press properties and you will be able to see the time the picture created on the bottom half,
hope this what you looking for

Why is my macpro reseted time and date?

Ok,eventually my macpro reseted his date and time to something about 2001... The point is,that i bought this laptop from a friend few months ago, and i even forgot to ask for a login password,and after that and didnt even consider reseting users. The problem with the time and date change,came another problem,i cant even use safari regulary,on sites such is facebook,or even apple .com,without getting a verification security verisign,without blocking the site that i am trying to get in to. Only way is to "trust" that site is manually sign it as "trusted" with your login and a password from your mac. Which i dont know,even my friend dont know the password,the one that i bought it from. Just to make some things straight,its not stolen,i bought it from an original owner,no matter how awkward this situation looks like. Thanks in advance for a any ideas.

Hi all
I have the same problem. When I put the touch to sleep, it seams that during the sleep phase, the time stands still and after power it on again, the time & date is reseted to the default settings.
Hope someone have an idea or a solution for this problem.
Cheers, istvan72

TIme and Date keep changoing

I am running the New 21.5 iMac with 10.6.1 and bootcamp with windows 7. My time and date keep changing, going forward 2-3 days and changing from AM to PM. This happens when I boot into Windows 7 or put it to sleep. I tried setting it to use the Apple NTP server and setting it manually, but neither keep it correct. Also, this is another issue, the display drivers do not offer the highest or correct resolution in Windows 7, it only shows a generic VGA display adapter in device manager.
TIA for any help!

Hello d:
Welcome to Apple discussions.
I do not use Windows on my Macs (and have no intention of doing so). Having said that, there is a forum for people who do here:
http://discussions.apple.com/forum.jspa?forumID=687
Barry

Preventive maintenance order actual completion time and date

Hey gurus,
In preventive maintenance order the basic and scheduled start dates are picked from the maintenance plan. Now the actual start and end dates are in display mode. My client wants an overall completion time and date of the preventive order and not of individual operations. Also at the end of the month they want to see the total time spent on preventive maintenance. Can you suggest any way to sort out the above problem.
Regards,
Abhishek

hi.
the basic start date and end date is coming from maintenance plan. but you can change that dates according to your requirment. For that you have to remove the automatic schduling check in the dates header in maintenance order. Afetr that you can put basic start and end dates as per your requirement.
Also the actual start and end dates and coming when you confirm the operation.
When you confirm the first operation, that date the system will take as actual start date and the day you confirm you last operation or fully confirmed the order will be taken as actual end date.
So i dont think yu have any problem. You can take basic start or basic end dates for this and change the dates as per your maintenace requirments.

Looking at FOCUS POINTS changes Time and Date

When I select VIEW FOCUS POINTS it changes the Time and Date information in the Metadata. I have seen it happen twice now. The images were taken with a Nikon D90 while in Australia. The first time that I noticed this I was in Hawaii and just looking at the FOCUS POINTS changed the Date and Time to Hawaii time. It happened again in Maryland and the time zone was changed to Eastern Daylight Time. To put the images back in the proper place I have had to change the DATE and TIME.
Has anyone seen this?
Roger

Thanks Tony,
Did you try this:
Shoot a photo with your camera set to your local time.
Import into your Mac set to the same local time.
Quit Aperture
Restart
Set the time on your Mac to another time zone.
Open Aperture.
Open the photo.
View the Focus Points
Then see if the time metadata is changed.
Mine changes and the place of the photo in the line-up of my folder changes.
It still does it after I updated to Aperture 3.0.3 from the 3.0
I know this is a lot of steps in the test process, but this is how it happens for me.
If this doesn't work I'll have to look into a new Nikon for you and a flight to Hawaii.
Cheers,
Roger

Time and date when the video was taken ???

i burned my project allready but while watching it on tv i cannot see time and date when it was taken .. i could see it on my camcorder but not in my project on dvd. how do i put it there?
thanx a lot.

I have this question too.

Loosing Time and Date Setting

Well hello altogether. I couldn't find an anwser to my question. Every time I'm cleaning my powerbook I take out the AC and the Battery avoiding to start the PB (maybe 2 minutes). When I start the PB again after putting the Battery and the AC back in, the time and date settings set back to 1970...
As far as I know, it was not like that from the very beginning.
The PB and the Battery are about one year old.
Any ideas?
Thanks in advance
Peter

Welcome to the Discussions!
That would be normal since what you are really doing is resetting the PMU.
http://docs.info.apple.com/article.html?artnum=14449
Joe

Why my atv can't set time and date after restoring it using itunes ?

when my atv restarting after I restored it using iTunes, it can't set the time and date.
the atv is connected to the net by wi - fi.
when I try to sign in using my apple id, I get a massage that the password is incorrect.
I have apple tv with ios 7.

The network and signal test on device won't give the full picture, for that you need a network report. Go to istumbler, netstumbler or similar, that will show true signal strength as well as any nose detected. You can also try Ethernet to help rule out WiFi issues.

7970 Time and Date

I just put in a new 7970 phone and the time and date are incorrect. Does anyone know where to change this? All other phones, 7940 and 7960 are correct.

To create a new Date/Time group in CUCM 8.5:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_5_1/ccmcfg/b02dtgrp.html
Device pool:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_5_1/ccmcfg/b02devpl.html
If you have a different version of CUCM then go to google and type the following into the search box:
"unified communications manager administration" + 7.1 site:cisco.com
The above would pull the admin guide for CUCM version 7.1
HTH.
Regards,
Bill

Sky go time and date error

Hi, have a samsu g galaxy tab 2, I have downloaded sky go, and any time I try to watch anything, after putting in my log in and password -TIME AND DATE ERROR COMES UP - but my tablet is on correct date and time. Feeling really stupid, feel as if it will be something really trivial stopping me getting connectdd. Any hints PLEASE Thank you

Pjo42,
Do you get any error message pop up when this happens? I got these popping up from around 23:55 Then when I selected ok I got this This was on a Note Pro 12.2 and Yoga 2 and all my settings are correct. This was a problem awhile ago and it was due to a coding error that was fixed. It looks like maybe the coding error is back in the latest version of the app.

How do i reset time and date on my itouch

how do I reset time and date on my itouch?

Go to Settings>General>International and make sure that Calendar is set to Gregorian.
Bext
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

RE: Time and Date Changed by itself

The date and time will change to the wrong one automatically especially after the batt died. This repeated itself regardless on how many times i readjust the time and date to the right one. Someone please help me.

I had the same problem today. I also have the iPod 4g, no problems up until today. First make sure you calender is set to "Gregorian, you can do this by going to Settings --> General --> International, and you will see the calender options, mark Gregorian. Still didn't work? Try this: I experimented a little, and what i did was: First, I went to Settings --> General --> Date and Time --> Set Date & Time (before doing this make sure you're in the correct time zone) and here you can change the time and date. But, if it changes automatically, go to the date, and you may have the same problem here, but here's what i did. I couldn't change the month, or day, but i could change the year. Change the year to 2011, and then all the other options should come up. Hope this helped!

Putting time and dates on pictures

Similar Messages

Maybe you are looking for