Puzzling problem - DW doesn't see recordset it created

NOTE: I'M STARTING THIS THREAD OVER IN THE DW APPLICATION
DEVELOPMENT FORUM... ADMIN, PLEASE DELETE THIS THREAD... SORRY FOR
THE DOUBLE POST.
I hope that there is someone out there that can help me with
this... I've looked all over online and can't find an answer to
this anywhere.
I'm using DW MX 2004 (7.0.1), ASP...
I get this message when trying to add the Update server
behavior... "before using this server behavior, please create a
Recordset"
I receive this message even though there is already a
recordset defined. I've even successfully created a brand new
recordset, using the DW tools, and it STILL gives me this error.
To answer some questions that you may ask during
troubleshooting...
Are there any error messages (red exclamation points) in the
bindings window? No.
Does the recordset appear in the bindings window? Yes.
Have you tried rebooting? Yes.
Can anyone please help me? I'm really stuck on this?
Thanks so much.

Yes there are settings of the mobile that take settings from user profile.
You need follow the links about planning and managing user profile.
Plan user profiles in SharePoint Server 2013
Manage SharePoint Online user profiles from the SharePoint
admin center
Indul Hassan
Microsoft Community Contributor
http://www.indulhassan.com
You Snooze.. You Lose !!

Similar Messages

DBCA doesn't see a newly created database

Hello,
I installed Oracle 10g on RHEL4. I created a database called ORCL during installation. Then I created another one, called TEST, using DBCA.
Both databases are up and running, but when I enter DBCA again and want to configure/drop database it sees only ORCL, TEST - not.
Can anybody help me?
A.

There's only one entry in oratab:
orcl:/u01/app/oracle/product/10.2.0/orcl
I guess there should be one for my test db and there isn't. I can enter it manually of course, but what path should I enter? There isn't
/u01/app/oracle/product/10.2.0/test
because I did only create a database.
I remember that when I created TEST database there was an error, something like "unable to write /tmp/oratab to /etc/oratab". But there was no file called "oratab" in /tmp then.
User, his right and pathes are correct - Oracle soft and first database were installed successfully, there's is only one problem - with the second db.
Thx in advance
A.

I have a big problem! My ipod touch is stuck! it won't open, all I see when I open it is the itunes icon with a USB cable and an arrow! What can I do? I've tried connectingit with itunes, but itunes doesn't see it. plus i have windows 8

Can't connect my ipod toch to itunes!!! It doesn't see it! I use windows 8, don't know if that's the problem. Anyways, my ipod is stuck! Every time I open it, it stays stuck with the image of a USB cable with an arrow pointing towards an itunes icon. but whatever I do, my computer doesn't see it, and neither does itunes. What to do???!!!

The the remaining items of the following, you may have to let the battery fully drain.
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Migration Assistant problem? : New iMac's iTunes doesn't see the catalog or playlist of my old Mac's songs on an external drive

So I just migrated from a 10.7.5 iMac 27" from 2009 to 10.9.4 on a 2013 27" iMac with Fusion Drive.
I don't use Time Machine. There are no backups involved here.
Used Ethernet. Only took 20 hours... (BTW, it stayed on "less than 1 minute left" for like 12 hours but luckily I was away and just left it going in hopes it would work... and it did!)
Anyway, back on my OLD iMac, I kept all of my songs on an external drive because my internal drive was too small. So iTunes looked at that drive for the music it was playing. I turned that drive off, even disconnected it, during the migration process because I thought it was confusing it during the first attempt which took 10 hours and nothing happened.
So now it worked, finally. On my new iMac, running Mavericks, I now have two user accounts... the one that was set up when I started the computer the first time, and the new one that transferred over via Migration Assistant. No problem. I can live with that. The only thing is, I would still think the old XML files and library stuff would migrate over... but iTunes doesn't see it. When I open up iTunes, in *either* account, iTunes behaves as if it's brand new. Repeat: the old and new account on the new iMac, both, do not see an old iTunes library which IS on the old iMac. Only the music is on the external drive from what I understand.
I've done this before so I know it's possible. I remember upgrading a long time ago and got iTunes to see my old library... even though some of the music was no longer there. It just puts "!" marks wherever there is no link. I was hoping that that's what I would find when I launched iTunes, but no luck. Even connecting the old hard drive to the new Mac (via USB) doesn't make iTunes all of a sudden "see" the old library. That data doesn't seem to be there. It didn't transfer over. Did it not transfer over because the songs weren't on the internal volume? Should I have left my external hard drive on?
So.... now that I've spent almost 3 days total trying to get this to work, and everything is running... I don't want to have to start over in order to get iTunes to work. Is there a way I can just drag over some XML files or something from the old computer? I don't want to lose all of the ratings and personal notes and everything.
I should add also that I have like only four songs I've ever actually bought through iTunes. I'm still a bit old fashioned and buy CDs and rip them to Apple Lossless. So I hope it's not an authorization / reauthorization issue because I have like 1400 albums ripped.
Thanks in advance for any help.
--Jeff

iTunes does not use the .xml it uses the .itl
If you are sure your old library file migrated across (does the file size and modification dates suggest it has?) start iTunes while holding down the option/alt key and guide it to the .itl file to get it to use that one.

Apple tv 2 AirPlay problem: doesn't see iPad or iPod

Hi,
I've a problem with my APple Tv 2.
The iPad doesn't see the Apple Tv, so I have to clear the setti gA about account and everything else and then everything workstation fine but not for long! If try the very Next day it doesn't works and i've to repeate tris annoying procedure once again!
Please help!

I'd still try to get rid of the coaster.
The cork is an insulator even if it feels warm it will prevent heat loss from the case of the Tivo below it, and will tend to keep heat in the sandstone above it which is conducting heat from AppleTV base.
I suspect the sandstone gets quite warm being in direct contact with the base of the AppleTV, but the heat can't go down through it's major surface area due to the cork insulating.
Some of my AppleTV's are of glass shelves - the heat will conduct into the glass but there's air below the glass that will keep it cooler - if there was a layer of cork underneath it would insulate against heat loss.
How about having 4 stacks of coins under each corner of the AppleTV to create an air-gap whilst minimising surface area (you could try 3 (2 front or back at corners, 1 in back/front center position, but might not be perfectly stable.
No harm trying.
Message was edited by: Alley_Cat

PSE 12 for Mac doesn't see my scanner

PSE12 for Mac refused to work with my scanner. In preferences I checked "Additional Plug-Ins Folder" and selected the Optional Plug-Ins Folder which contains the TWAIN.plugin. I restarted the PSE and the File> Import... command remains dimmed out. Tried resstarting the iMac and PSE still doesn't see the scanner. PSE 11 used to recognize the scanner right away. I hope this isn't a permanent change in PSE 12!
Thanks for any help!
OS X 10.8.5
Canon 8800F Scanner
TWAIN.plugin v12.0.4x001

Hi Barbara - I reinstalled PSE 11 on my iMac and verified that it still works with the Canon 8800F scanner. I also installed PSE 12 on my Macbook Air, moved the Twain plug into the right spot, and found that it doesn't see the scanner either. Preview on the Macbook does see the scanner OK so it's not a connection problem there either.
I noticed that the Twain plugins in PSE 11 and 12 are the same version but different sizes. The get info windows for the two versions of PSE on the iMac (Kahawalu) and the PSE 12 on the Airbook (Niumalu) are below. Would you be able to let me know the PSE 12 Twain file version and file size that is working with your Canon scanner? It might help narrow this thing down.
Thanks again for your assistance! William

I have prepared a book on iPhoto, ready to buy book. There is amessage above about half the pages that says "drag photo to place in background" as if it doesn't see the picture there. Its a MAC 08X 10.6.8 and iPhoto '08 7.1.5. I have made iBooks before b

I have prepared an 82 page book on iPhoto, ready to buy. There is a message over about half the photos saying "drag photo to place in background" as if it doesn't see the photo already there. I have spent over 20 hours getting to this point and can't bear to start over! Its a Mac 08X 10.6.8 and iPhoto 08 7.1.5. I have made other iBooks on this software and computer with no problems. Help please!

Look for a page that has a similar layout:
The one photo per page layout is the easiest to miss. Just click on a background color to remove the problem.
OT

ITunes 9.2.1 doesn't see my iPhone 3G 4.0 on Windows 7 x64

Hi everyone. I'm running Windows 7 x64 and have been having this problem since I updated my iTunes to 9.2. The problem is I plug my phone in, and iTunes doesn't see it. After plugging it in, iTunes seems to struggle a bit, lags, before finally running smoothly again. The phone doesn't appear in iTunes, though my computer detects it and I can browse the photos like I always could. Any help is appreciated!

yup same here
its a crapshoot, sometimes it happens other times it does not
only way round this i found is to do this:
reboot windows
and reboot iphone
eventually they will see each other.
what causes it? poorly coded itunes for windows, who knows.
but its something i've had for many versions now, 9.2.1 is nothing new. but it does seem to happen more now.

Itunes 10.6 doesn't see my ipad, ipod, or iphone

I reinstalled 10.6 and it worked once and now it doesn't see them again.I rebooted and it still doesn't recognize my iPad. I googled this question and this problem seems common but I haven't heard of one permanent solution. I am about to lose MobileMe, so the only way I will be able to sync is through itunes. Please tell me there is a solution. Thanks.

Do they have airdrop enabled?

ITunes doesn't see PSE7 images

I had Photoshop Elements 8 installed, and iTunes could see those photos just fine. But then my trial expired, so I had to uninstall and use PSE7. The problem is that iTunes no longer sees my PSE7 catalog and instead sees the PSE8 catalog as it was before it was uninstalled. I managed to track down where iTunes apparantly copied the PSE8 catalog and deleted it, but now iTunes doesn't see any PSE catalogs at all.
Of course there is the option to sync with individual folders, but I'd rather not do that since PSE keeps them nice and organized, and iPod Touch doesn't show the folders within subfolders of the selected folder for photo syncing. So, how can I get iTunes to pick up my PSE7 catalog again?

I had something similar (if not the same) happen. I was going to transfer some new shows from iTunes on my laptop into my iPod. The msg I get from iTunes: "iTunes cannot read the contents of the iPod "(iPod'S name)". Use the iPod Software Updater application to restore the iPod to factory settings." The best part....my iPod's empty! I don't know what happened but I tried to connect it to my work PC and it read the same. I can reload my iPod with songs/shows. That's not an issue BUT I'd like to know what may have caused this and how do I know it won't happen again?
PC Windows XP

XP/Pro box doesn't see other computers on network after running CiscoConnect on it

Got a new E4200 on September 13 to provide internet and networking to a small business network.
There are 2 wired computers, one an XP/pro and the other a Win 7/64 bit. Both worked straight out of the box in that both had access to each others' files after plugging them into the E4200. Two other wireless computers were connected using CiscoConnect, one a Vista and the other a Win 7, and all was fine. All computers were able to see each others' file. Also managed to get a wireless Canon printer working even though CiscoConnect wasn't able to find it.
After I realized I didn't run CiscoConnect on the XP, I did so using the USB key created on the Win7 box and the result was that the XP box doesn't see any of the other computers although all the other computers can see the XP files. After uninstalling CiscoConnect on the XP and rebooting, the XP can't access the other computer files but it can still access the internet and the wireless Canon printer that CiscoConnect can't find. Rebooting or powering off/on the router didn't change this state.
Would appreciate any ideas in getting the XP back into the network.
Firmware Version:
1.0.02 build 13 May 24, 2011

Update on above problem:
Performed a System Restore on the XP and partial networking functionality was restored. The XP box now sees the Vista and the XP Explorer can see all computers under the Workgroup. Probing the Win 7 computers from XP's explorer the XP returns the following: message
\\Win7a is not accessible. You might not have permission to use this network resourc. Contact the a...
This message doesn't mean much to me as I have limited networking experience but somebody here might understand this clue.

A lot of problems with Oracle BI SEE 11g

I have a lot of problems with Oracle BI SEE 11g
1. I upgraded my BI SEE 10 repository and can it openning in offline mode.
2. I can't deploy my upgraded repository in EM MW Control 11g - when i try to open Farm_bifoundation_domain->Business Intelligence->coreapplication, i get error "Stream closed
For more information, please see the server's error log for an entry beggining with: Server Exception during PPR, #41".
Opening Logs by EM control doesn't work too.
in file middleware\user_projects\domains\bifoundation_domain\servers\AdminServer\logs\AdminServer.log i see this event:
<Error> <HTTP> <oratest.itera.ru> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <b639ac3e56e9a463:bd6fa7f:12ac7271e09:-8000-00000000000009e8> <1283408423378> <BEA-101019> <[ServletContext@329875093[app:em module:/em path:/em spec-version:2.5]] Servlet failed with IOException
java.io.IOException: Stream closed
Have you any ideas?
3. Ok, i taking sample repository and adding a new datasource in it:
Database: Oracle 8i
Connection pool:
Call interface OCI 8i/9i
Data source name:
(DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (Host = oraapp) (Port = 1521) ) ) (CONNECT_DATA = (SID = MYSID) ) )
This settings are working fine in BI 10.
In BI 11g i get this funny error: "The connection has failed". I lost my time in attempts to connect to Oracle DB 8, but have not results. After that i hacked button "Query DBMS" at "Features" tab, pressed it and when get error "ORA-03134: Connections to this server version are no longer supported.".
Therefore Oracle 8 DB as datasource not supported. Am i right?
4. In sample repository i added oracle DB 10 as datasource, then added two dual tables and their connection to all layers.
Now i open BI Answers, and trying to create report with one dummy column, Now i have this error:
Error
View Display Error
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 42016] Check database specific features table. Must be able to push at least a single table reference to a remote database (HY000)
SQL Issued: SELECT s_0, s_1 FROM ( SELECT 0 s_0, "ORA10G"."dual"."dummy" s_1 FROM "ORA10G" ) djm
Database features are defaults.
Does anyone solve this problem?

Turribeach, Thanks for you time.
1. It was not a question
3. Yes, i have read platforms, but not supported datasources. Now i see, that BI 11g support as datasource Oracle DB 9.2.0.7 or higher. I am sorry.
4. I'm using OCI connection type
Now i recreate Database in Physical schema and answers is showing report data for me! But only from one table, when i use columns from to tables from one datasource, i geting error:
Error View Display Error Odbc driver returned an error (SQLExecDirectW). Error Details Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 46008] Internal error: File server/Utility/Server/DataType/SUKeyCompare.cpp, line 875. (HY000) SQL Issued: SELECT s_0, s_1, s_2 FROM ( SELECT 0 s_0, "Ora10g"."hierarchy_obj_cust_v"."sort_order" s_1, "Ora10g"."NSI_SCHEMA"."SCHEMA_NAME" s_2 FROM "Ora10g" ) djm
Edited by: serzzzh on 03.09.2010 3:44

Thunderbolt to Firewire doesn't see External HardDrive

Greetings...
I was setting up my Mom's new MacBookAir, and I had to aquire a Thunderbolt Adapter (to Firewire 800). She used an External drive for her Time Machine backup previously. It is a Maxtor OneTouch drive, but it uses the older Firewire ports. Fortunately, the Firewire 800 cable I bought (by Rocketfish) also came with an Adaptor to connect the FW 800 cable to the FW 400 ports on the Maxtor drive. But, the drive won't show up on her Desktop (nor does Time Machine see it when trying to use Migration Asst to transfer her backup). I also pulled up the Disk Utility (as a test), but it didn't see the External drive either (?).
Anyone out there have an idea as to why the MacBookAir (running Maverick) doesn't see the External Maxtor drive? I appreciate any input…Chip Henley

I thought that the cable might have been bad, so I used the USB cable that went with my Iomega HD to test this idea. It didn't work either.
Ironically, after I posted my previous message, lo and behold, the SimpleDrive showed up when I booted my PowerBook. I used that opportunity to reformat the HD for MacOSX extended (journaled), and it has thus far appeared twice after shutting down and rebooting. So, I'm not quite sure what the problem was, or still may be. But I'll keep the forum notified of progress or setbacks, so my learnings can be used by others.

Mac Doesn't See External Drives on WinPC, PC Doesn't See Mac

I'm trying to transfer some files that are on an external drive connected to a Windows PC to my new Mac Pro.
On the Mac, in Finder, I can see the PC, but I can only see it's internal Hard Drive; the external drive don't show up in Finder.
On the PC, I'm not seeing the Mac Pro at all. In Tiger, it seems to me, there was check box under the "sharing" preferences for "Windows sharing," but I can't find that in Leopard. So, the PC doesn't see the Mac at all.
It does suddenly dawn on me that I could just detach the external drive that I'm trying to copy from the PC and plug it into the Mac, but... that would be too easy. I would still like, at least, to be able to see the Mac from the PC.
Any suggestions?
Thanks,
--PS

My recommendation is to format the drive as FAT32 via OSX's Disk Utility, this will allow you to read/write from both the Mac and PC environment.
Like I said, I don't think that's the issue, because my MacBook shares everything with the PC just fine (except the externals on the PC). And of course, I don't want to reformat the external drives until I've got the data off of them.
I just checked, and Tiger has a "Windows sharing" checkbox under the "Sharing Preferences" that allows the MacBook to show up in "My Network Places" on the PC. The problem I'm having is getting the MacPro to show up on the PC; the Pro has Leopard, and there's no "Windows Sharing" in Leopard that I can see.
Thanks again,
--PS

Vista: 1.3 Downloader Doesn't See Sony a700 .ARW's; Odd Mouse Behavior

On my Vista system,the LR 1.3 downloader (now "Adobe Photodownloader 3.0 Component") doesn't see Sony a700 .ARW's when I choose Camera Or Card Reader as the source. I don't know about a100 .ARW's. The downloader for 1.2 didn't recognize either. I can still import them in place once I have them downloaded using the Vista Photo Gallery.
A new problem is that when I scroll through a group of images using the mouse scroll wheel the library loupe preview updates as before but the thumbnail doesn't shift until the histogram appears. The left and right arrows work properly.
The device manager shows the mouse (a Gateway branded optical mouse) as a "HID-compliant mouse". No updates to the mouse appear to be available.

If I use the "Choose Files" and "Copy To A New Location" options I can import directly into LR. I prefer to just keep using the Photo Gallery downloader and then import in place until the LR downloader is fully compatible. The annoyance for me is that there is now a lag in changing the active photo on the film strip in Library Loupe view when using the scroll wheel.

Puzzling problem - DW doesn't see recordset it created

Similar Messages

Maybe you are looking for