PVZ didn't work after software update

PVZ wouldn't open after I updated my ipod touch software. It just shows the PopCap logo then goes back to the ipod screen. Other applications also did not open after the software update but went back to normal after I updated these other applications. Does this mean I have to update PVZ by purchasing a new version?

Thanks! I tried the "reinstall affected application" in the troubleshooting page but when I went to app store to download the application again, it didnt say anything about me having paid for that application before and that i'm just reinstalling.. it just said buy.. I clicked it anyway. I hope that's normal but I won't get charged for it. or did I do it wrong?

Similar Messages

  • Route 66 won't work after software update

    After repair my nokia E71 has been flashed with software version 400.21.
    Now my route 66 is not working anymore.
    can anyone help me with this problem?
    Updates from Route 66 didn't work eighter
    regards Robert

    I don't really understand why new systems are not designed to handle old software.
    Neither do I.
    When iLife '08 was released, Apple made iMovie 6 available for download for owners of iLife' 08. But since the release of iLife '09, the iMovie 6 download was pulled. So you are a few months too late for that download.
    What can I do that doesn't involve spending more?
    There are a few options, some of which involves spending.
    You may partition yor hard drive (Apple's Disk Utility) into to parts: One with Leopard and one with Panther or Tiger. The latter is where you install iMovie 4 and iDVD 4. Don't forget to do a VERIFIED backup BEFORE you start.
    OR
    You can buy a used copy on iLife '06 on eBay. Many are in your position, so I hear the prices are rising.
    OR
    If you have an external Firewire hard drive, install Panther/Tiger, iMovie 4 and iDVD 4 on that drive.

  • Phone not working after software update!!

    i dont know if anyone could help me but i recently done a software update for my blackberry torch 9800 and after it upddated it hasnt been the same the screen isnt the same some of my icons are missing and nothing is right and i done a software downgrade to see if that would help and it didnt make any difference and i have removed the battery several times but it does not seem to be working and i do not know what to do! so if there someone who might be able to help me i would be very greatful.

    Hi and Welcome to the Community!
    Please refer to this official download portal as you proceed. It is sorted first by carrier -- so if all you want are the OS levels your carrier supports, your search will be quick. However, some carriers are much slower than others to release updates. To truly seek out the most up-to-date OS package for your BB, you must dig through and find all carriers that support your specific model BB, and then compare the OS levels that they support.
    http://us.blackberry.com/support/downloads/download_sites.jsp
    From a PC, you can install any compatible (e.g., for your exact BB Model Number) OS package to a BB via this procedure:
    http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
    Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC. After installing the OS package to your PC, please remeber to delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
    C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
    C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
    Be sure that you remove, from your PC, any other BB device OS packages as having more than one installed to the PC can cause conflicts with this procedure.
    You may also want to investigate the use of BBSAK (bbsak.org) to perform the wipe it is capable of.
    You may also want to try the "Bare Bones OS Reload Procedure" to attempt to narrow down the precise causal item:
    Load your OS "bare bones"...if anything is optional, do not install it.
    If the behavior presents immediately, then try a different OS with step 1
    If the behavior does not immediately present, then run for as long as it takes for you to be sure that the behavior will not present.
    Add one thing -- no matter how tempting, just one.
    If the behavior does not present immediately, then again run for long enough to be sure it will not have the same problem
    Repeat steps 4 and 5 until all things are loaded or the behavior presents
    When the behavior presents, you know the culprit...the last thing you loaded.
    If the behavior does not re-present, then you know that either step 1 or 2 cured it.
    If the behavior presents no matter what, then you likely have a hardware level issue for which no amount of OS or software can cure.
    You may also need the use of these tricks:
    KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
    KB27956 How to recover a BlackBerry smartphone from any state
    http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
    If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
    KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Natd stopped working after Software Updates: Bogus VLAN injections?

    Software Update installed three packages on the iMac today:
    Safari 3.1 Update (Universal)
    Security Update 2008-002 (Universal)
    AirPort Extreme Update 2008-001
    This machine (running 10.4.11, fully updated now) is my connection-sharing gateway the internet for my wife's MacBook, a Linux box and a TiVo unit.
    Comcast ==(ethernet)== public-IP iMac ==(wireless)== private IP MacBook, Linux, TiVo
    I ran my usual firewall + Internet sharing script after the mandatory reboot.
    The iMac's broadband connection worked fine for local programs (Safari, ssh) but none of the machines with private IP addresses on the LAN could see the outside world. The machines on the home LAN could see each other fine -- ping, ssh, etc. Time to start testing!
    When I pinged an external machine from the Linux machine, the DNS lookup succeeded after a delay, but it seemed that no ICMP responses came back. Actually, packet tracing with Wireshark showed that the responses had come in with an extra four-byte header field I had not seen before: something called "802.1Q Virtual Lan" inserted between the Ethernet II header and the Internet Protocol header. Sample packet dump (slightly edited):
     No.:  20
     Time:  00:04:56.746703
     Source:  64.233.187.99
     Destination:  192.168.1.2
     Protocol:  ICMP
     Info:  Echo (ping) reply
     Frame 20 (102 bytes on wire, 102 bytes captured)
     Ethernet II, Src: AppleCom_54:1b:30 (00:17:f2:54:1b:30), Dst: FirstInt_94:75:8f (00:40:ca:94:75:8f)
      *802.1Q Virtual LAN*
         *001. .... .... .... = Priority: 1*
         *...0 .... .... .... = CFI: 0*
         *.... 0000 0000 0000 = ID: 0*
         *Type: IP (0x0800)*
     Internet Protocol, Src: 64.233.187.99 (64.233.187.99), Dst: 192.168.1.2 (192.168.1.2)
     Internet Control Message Protocol
    Looking further back in the trace, it turned out that the DNS delay had the same oddity. The Linux machine sent out a request to the primary DNS server, got back an immediate response with the extra "802.1Q" field, waited 5 seconds, sent out a DNS request to the secondary server, got an immediate normal response (without "802.1Q"), then immediately used the returned numeric address for the pings. It's as if the Linux machine ignored the packet with the extra, interposed header.
    I traced HTTP traffic to google.com and saw a similar pattern:
    1. bogus 1st DNS response
    2. delay
    3. good second DNS response
    4. sent HTTP SYN packet
    5. got back HTTP SYN/ACK with extra "802.1Q" field
    6. multiple retries of steps 4 and 5.
    I suspect that one or more of the software updates is inserting this VLAN stuff into NAT-ed packets over Airport. The receiving machines drop the packets because they expect the Ethernet II header to be followed by the IP header, not 802.1Q data.
    An old discussion thread ([VOIP VLAN using 802.1q frames causing massive dropped packets|http://discussions.apple.com/thread.jspa?threadID=378673#1833386]) talked about a similar problem.
    Here are the NAT-related commands from my firewall script:
      natd -u -dynamic -interface en0
      /sbin/ipfw add divert natd all from not me to any via en0
      sysctl -w net.inet.ip.forwarding=1
    Question: is there a known workaround to get the MacOSX network drivers not to insert 802.1Q VLAN headers?
    Thanks in advance!
    --GCL

    Hello faab:
    Welcome to Apple discussions.
    I am afraid to indicate that you probably will need to wait until you are back and have the software install DVD.
    There is really no way to tell what happened. To fix it, however, you really need the DVDs.
    Barry

  • Built in iSight not working after software update!

    Last night, I updated front row, quicktime, and iTunes via the software updater. Now nothing is recognizing my built in camera (iChat, photo booth). It says there is no camera connected to the computer. Also, software update isn't working. Does anybody have any idea what could have happened and how to get it running again? Thanks!

    NikoM2008 wrote:
    Installing the combo update - as you suggested - did not solve the problem. Any other ideas? The iSight is still not being recognized by the system profiler.
    Here is what I suggest you do next.
    System Profiler is a pre-Lion term.  If you are really using OS X 10.7.3, you need to use the "System Information" utility. 
    After you launch "System Information", click the "USB" item in the "Hardware" item of the System Information window's sidebar.  (If the reveal triangles are pointing to the right like ►, click on it so it points down like this ▼ to find the USB item.)  Then look under each USB bus item in the "USB Device Tree" for your camera.
    If there is no iSight or FaceTime camera listed anywhere in your "USB Device Tree", verify that you used the correct PMU/SMC "reset" procedure for your particular Mac model.  If your camera is still not recognized in System Information", yours is most likely a hardware problem that will require a professional fix.
    Then contact Apple or an Apple-Authorized Service Provider for service.
    Unless you have a current backup, make one before giving your Mac to the repair technician.
    Message was edited by: EZ Jim
    Mac OSX 10.7.3

  • My ipod touch won't work after software update.

    Last month I downloaded a software update for my iPod Touch and afterwards it wouldn't work or connect to my PC. It just showed a picture of the USB cable with an arrow pointing to the iTunes logo.
    I fixed the problem by plugging the iPod into my other PC - where it connected no problem - and I Restored it. I then plugged it back into the first PC and re-synchronized it there. It worked fine after that.
    I just downloaded a software update for iTunes and the iPod Touch, and I have the same problem. I know that I can go through the same time-consuming solution as last time but how do I fix this so that it doesn't keep happening?
    My PC does seem to recognise the iPod as a camera when it connects. Could that be it? Help please.

    Have you tried everything here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    It is normal/expected for the computer to recognize the iPod as a camera.  It would only be a possible problem if you installed a program such as for a camera or scanner.

  • Bluetooth Mouse stops working after software updates

    Hello,
    I've been using a Bluetooth mouse with my X220 Tablet for several months now. After fiddling with device manager to ensure that the Thinkpad Bluetooth device does not have the "Allow the computer to turn off this device to save power" setting set, things were working perfectly.
    However, after running through some windows & Lenovo updates, the mouse now seems to work for a while, but after any idle time, the mouse stops working. Turning the mouse off & back on seems to cause it to reconnect, and it works until the next time it goes idle for 2 minutes.
    I've gone through device manager, and made sure both the Bluetooth & USB Root devices are set not to power down (per http://forums.lenovo.com/t5/X-Series-ThinkPad-Laptops/Bluetooth-mouse-stops-working-from-time-to-tim... ), but still no luck.
    The software updates applied from the Lenovo System Update tool were:
    ThinkPad Power Management Driver: 1.67.04.05
    ThinkPad Power Manager: 6.64.4
    Lenovo Solution Center: 2.4.002
    Intel G1/G2 Display Driver: 9.17.10.3347
    Also, some windows updates  which don't seem related (mostly security), but I can lookup the list of KB numbers if helpful.
    Are there any known issues with the power manager updates that might affect this? If so, what's the best way to revert to the last working version?
    Thanks!

    Try doing a PRAM reset and see if that helps, also put in new batteries as that may make a difference.
    OS X Yosemite: Reset your computer’s PRAM

  • Scan to email not working after software update

    I got a software update notice on printer yesterday and after that scan to email has stopped working. its EXTERMELY slow to connect and dont work at all. 
    I spent an hour restarting and resetting router and printer, and nothing has helped.
    Please fix the new software update.

    Hello Dexter123,
    Welcome to the HP Forums.
    I see that you are having some issues when attempting to scan to email.
    Please click on the following link for instructions on how to  Scan from Windows 7 With the Full Feature HP Software for HP Multifunction Printers.
    I suggest that you go through the entire document on the Scan to Email section just in case a setting has been changed. 
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time.
    Cheers, 
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Z10 Fail to work after software update

    Hi everyone. I connected my Z10 device on my wifi network to do the latest software update. Everything worked fine, and I was asked if my device can restart.  After the device restarted himself and came on, nothing was working.  I can't access any apps on my phone it just stays on the homescreen. I can't send messages, I cant open my contacts nothing works.  I restarted the device several times therafter with no effect.  I took out the battery and put it back in and its still not working. I'm wondering if I am the only person who experienced this and what I must do?

    Hello, The most common thing to do after an update that results in issues is to perform an OS reload. Sometimes, the update processes have errors and such...with a reload often curing the issues. The official methods, which will be controlled as to what exact OS versions you are offered:http://supportforums.blackberry.com/t5/BlackBerry-10-Functions-and/How-to-Reload-your-Blackberry10-O...The unofficial methods, which are cleaner, and allow you to choose an OS version that perhaps your carrier (or whoever it is controlling your offers) has been slow to approve:http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...http://forums.crackberry.com/bb10-leaked-beta-os-f395/bb10-os-archive-943672/Of course, before you started anything, hopefully you already took a good backup via LINK, a manual copy of your Device Memory to your PC, and full documentation of your configuration (account credentials, added apps, configurations, etc.). Sometimes, restoring from a backup returns to the device the very corruption one needs to eliminate, and reconfiguring from scratch can resolve that. Good luck!

  • Airport EXPRESS doesn't work after software update on Airport EXTREME

    My Airport Express stopped working after I did my software update for my Airport EXTREME the other day. It lost the connection to my Airport EXPRESS and so I did a hard reset and tried to redo the whole profile but after many, many hard resets, I still can't make it work.
    Airport Setup Assistant shows that the setup is complete and everything is fine. But if I select "Extend my wireless range", after the setup, my Airport Express won't even appear anywhere. If I select "Join my wireless network" then it will appear with a 169.xxx.xxx.xxx IP address under my Airport Utility. It will also show up on my iTunes but I can't open it using Airport Utility and iTunes spends a long time searching for it and then gives up. In all the above cases, the amber light remains flashing and the green light never comes on. What else can I do to fix this??

    Either change the channel that the phone is transmitting on or change the channel the Express is transmitting on. You can do the latter in Airport Admin Utility; the former depends on your phone.

  • Scanner samsung scx-4300 does not work after software update v 2.3

    hi everybody,
    i just noticed that after i run software update on my mac mini and install samsung printer software update v2.3
    I'm no longer able to scan from my Samsung SCX-4300
    on macbook pro i noticed the software update has not been installed, and i can still scan without any problem
    is there a way to uninstall the software update?
    thanks.

    What's the correct way to uninstall SamsungPrinterSoftwareUpdate v.2.3
    If  I delete the following:
    - Samsung folder in /Libraries/Printers/
    - Samsung Scanner.app in /Library/Image Capture/Devices
    Will it remove samsung driver for printer and scanner?
    If yes, then I can reinstall SamsungPrinterSoftwareUpdate v2.2 (found in on the internet from google search)
    note: confirmed the problem is with SamsungPrinterSoftwareUpdate v2.3

  • Touch no longer works after software update

    After downloading new software update, I got an error message during installation.  Troubleshooting information recommended a restore.  After doing a restore and using the most recent backup (which turns out to be my ONLY back-up) I am unable to change playlist with iTunes.  I am unable to manually add anything.  ANY suggestions?

    Thank you to the community for the replies.
    Its very frustrating to be having email issues. I'm here to help. Did Any of these suggestion resolve the issue? Have you downloaded any applications that effect or sync email? Are you still experiencing sync issues? As long as your device is backed up with Gmail and you know that log in information. Please hard reset the device and attempt to add the corporate e-mail again.
    Thank you

  • Corporate e-mail no longer works after software update

    I recently upgraded to GB and can no longer get my work e-mail through Corporate Sync.  "The device cannot be provisioned on this server."  My IT group has changed nothing on their end.  I've tried several freeware apps with no luck getting errors like "This server requires security features your phone does not support."  Up until the software update, my phone was fine and I'd been syncing for eight months using corporate sync.  

    Thank you to the community for the replies.
    Its very frustrating to be having email issues. I'm here to help. Did Any of these suggestion resolve the issue? Have you downloaded any applications that effect or sync email? Are you still experiencing sync issues? As long as your device is backed up with Gmail and you know that log in information. Please hard reset the device and attempt to add the corporate e-mail again.
    Thank you

  • Microsoft office 2003 not working after software update

    I tried opening up my MS Word and Powerpoint programs last night by clicking on their icons.  It did not open.  However, I opened the programs a few weeks ago when I created several documents but now nothing.  But at the same time it does open my existing files using these programs.  And when that's happened, I am able to close the existing file and do a FILE: NEW and save with no additional issues.
    I have a feeling that the most recent Software Update 2011-002 is to blame.  Just like when previous versions were to blame when it disabled my previous version of Photoshop.  Also, just as the last Safari update a while back still continues to cause problems for me when I try to check my email on AOL for Desktop for Macs forcing me to go directly to www.aol.com over the web.
    What can I do to remedy this problem without having to purchase an updated version of MS Office?  I personally don't believe the latest version of MS Office will work on my laptop because it DOES NOT have the Intel chip.  Unfortunately, I purchased my laptop just prior to the Mac Intel processors came out on the market. 
    In conclusion, each time the program crashed or stalled when I tried opening it multiple times I sent a report to Apple.
    Any help will be greatly appreciated.
    Send me an email if necessary.  I don't always log into the Apple site.
    Thanks, Christie

    There is no Office 2003 for Mac
    http://www.microsoft.com/mac/downloads

  • Ipad failed to work after software update

    I have an ipad 2. after recent software update,  was told to connect to itune. when connected to itune was further advise to restore factory settings.  however  even after going through recovery, encountered failed to recover. what should I do now

    Hello, The most common thing to do after an update that results in issues is to perform an OS reload. Sometimes, the update processes have errors and such...with a reload often curing the issues. The official methods, which will be controlled as to what exact OS versions you are offered:http://supportforums.blackberry.com/t5/BlackBerry-10-Functions-and/How-to-Reload-your-Blackberry10-O...The unofficial methods, which are cleaner, and allow you to choose an OS version that perhaps your carrier (or whoever it is controlling your offers) has been slow to approve:http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...http://forums.crackberry.com/bb10-leaked-beta-os-f395/bb10-os-archive-943672/Of course, before you started anything, hopefully you already took a good backup via LINK, a manual copy of your Device Memory to your PC, and full documentation of your configuration (account credentials, added apps, configurations, etc.). Sometimes, restoring from a backup returns to the device the very corruption one needs to eliminate, and reconfiguring from scratch can resolve that. Good luck!

Maybe you are looking for