Pwd change option in Hyperion 9.3.1
Hi All,
i created a user in Shared services and exported to WebAnalysis till now this is fine....
is there any option for user to change Password
Vijay.....
Hi Vijay,
There is no such option in Web analysis Studio to allow user to change his password. But he is accessing reports developed in web analysis studio from workspace then there is an option in workspace under link 'Preference' to allow a user to change his password.
Hope it will help you.
Atul K,
Similar Messages
-
How to track changes in a hyperion application for SOX control?
Hello all,
We have been working on identifying the best way on how to track changes in a hyperion application in regards to the SOX control.
The following areas have been identified as the main areas of an application where the changes are to be tracked:
Monthly data load from ODI
Calculation of data
Metadats change
Formula edit
Changes to reports
Changes to security
Can anybody please suggest the best ways to do this? Has anyone experienced this issue before?
Somebody suggested that there is hyperion auditing available.
Is there any other software that is available that can do this or just documenting the changes would be the best option?
Please suggest. Toyr response would be appreciated.
Thanks.Shared Services allows the auditing of provisioning and life-cycle management activities to track changes to security objects and the artifacts that are exported or imported using Lifecycle Management Utility.
For Shared Services auditing, refer Page 129 of http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_security.pdf
Planning Administrators can select aspects of the application for change tracking. For example, you can track changes to metadata, such as when users change a member property or add a currency. You can also track changes in data forms, business rules, workflow, users, access permissions, and so on.
For Planning auditing, refer Page 56 of http://download.oracle.com/docs/cd/E12825_01/epm.111/hp_admin.pdf
HTH-
Jasmine. -
Fast change option in Sales order-Additiinal field required
Dear al
We want to add schedule line category field in Fast change option in Sales order as we have a requriment of changing schedule line category for more than 20 lines in sales order...After sales order is created ,we go and change the schedule line category ...
Tried using MASS transaction but this doesn't have Schedule line category field.(VBEP table)
Table name-VBEP
Field name-ETTYP
In VA05 also there is no option to change schedule line category mass update...
Should we have to do in screen painter only for adding this field...
Please confirm
Regards
SudhaHi Sudha
It would be better if you tell with which Ztable you have updated the data and how. It would be better if you share what you have done
Regards
Srinath -
"Open in Smart View" option. Hyperion Planning version 11.1.1.3
Failure to download planning form to Smart View using the "Open in Smart View" option. Hyperion Planning version 11.1.1.3. Error message "Web launch operation has been cancelled.
Your feedback is appreciated.I understand you are on 11.1.1.3.
However, this is documented in the Known Issues section of the Smart View 11.1.2.1 readme and could be worth a try:
When you try to open a Planning web form in Smart View through Workspace, you may get this error: “Web launch operation has been cancelled.” This happens if Essbase has not been added as a server in Shared Connections. Workaround: Open the Smart View Panel in Smart View and add an Essbase server as described in the online help or "Adding Essbase Servers" in chapter 2 of the Smart View User's Guide.
HTH-
Jasmine. -
Changing option in function module
sir,
plz explain the role or importance of changing option in function module SE37hi check this example it had the usage of the changing option..
here the using will input the value to the perform and do some prosses and output some value..
PERNR TYPE P0001-PERNR Personnel Number
PLANS TYPE P0001-PLANS Position
ORGEH TYPE P0001-ORGEH Organizational Unit
DATE TYPE SY-DATUM SY-DATUM Date and time, current (applic
PLVAR TYPE PLOG-PLVAR '01' Plan Version
ISTAT TYPE PLOG-ISTAT '1' Planning Status
MANAGER TYPE ZHMSS_MANAGER Structure for manager for MSS
NO_PERNR_PLANS_ORGEH_SPEC No pernr, position or org unit specified
NO_EXIST_PLANS Position does not exist
INVALID_PLANS Position invalid
NO_EXIST_ORGEH Org unit does not exist
NO_EXIST_PERNR Personnel number does not exist
function z_get_orgunit_manager_info.
""Local interface:
*" IMPORTING
*" REFERENCE(PERNR) TYPE P0001-PERNR OPTIONAL
*" REFERENCE(PLANS) TYPE P0001-PLANS OPTIONAL
*" REFERENCE(ORGEH) TYPE P0001-ORGEH OPTIONAL
*" REFERENCE(DATE) TYPE SY-DATUM DEFAULT SY-DATUM
*" REFERENCE(PLVAR) TYPE PLOG-PLVAR DEFAULT '01'
*" REFERENCE(ISTAT) TYPE PLOG-ISTAT DEFAULT '1'
*" EXPORTING
*" REFERENCE(MANAGER) TYPE ZHMSS_MANAGER
*" EXCEPTIONS
*" NO_PERNR_PLANS_ORGEH_SPEC
*" NO_EXIST_PLANS
*" INVALID_PLANS
*" NO_EXIST_ORGEH
*" NO_EXIST_PERNR
if pernr is initial and
plans is initial and
orgeh is initial.
raise no_pernr_plans_orgeh_spec.
endif."pernr is initial and
if not pernr is initial.
if pernr cn '0123456789'.
exit.
endif.
*-- See if pernr exists
call function 'P_EMPLOYEE_CHECKEXISTENCE'
exporting
object_id = pernr
date = date
exceptions
employee_not_found = 01.
if sy-subrc ne 0.
raise no_exist_pernr.
exit.
endif.
*-- Obtain pernr position
call function 'HR_READ_INFOTYPE'
exporting
pernr = pernr
infty = c_infty_0001
begda = date
endda = date
importing
subrc = g_retcd
tables
infty_tab = i0001
exceptions
infty_not_found = 01
others = 02.
if sy-subrc eq 0.
describe table i0001 lines g_lines.
if g_lines > 0.
read table i0001 index 1.
*-- Got position now find org unit
perform zf_proc_get_om_objects tables i_objects
using c_otype_position
i0001-plans
plvar
c_rsign_a
c_relat_003
istat
date
date
c_otype_orgunit
changing g_retcd.
if g_retcd eq 0.
read table i_objects index 1.
g_orgeh = i_objects-sobid(8).
endif. "g_retcd eq 0.
endif. "g_lines > 0. for i0001
endif. "sy-subrc eq 0 hr_read_infotype
elseif not plans is initial.
if plans co '9' or
plans co '0'.
raise invalid_plans.
exit.
endif.
call function 'RH_READ_OBJECT'
exporting
plvar = plvar
otype = c_otype_position
objid = plans
istat = istat
begda = date
endda = date
langu = sy-langu
exceptions
not_found = 1
others = 2.
if sy-subrc <> 0.
raise no_exist_plans.
exit.
endif.
*-- Find org unit
perform zf_proc_get_om_objects tables i_objects
using c_otype_position
plans
plvar
c_rsign_a
c_relat_003
istat
date
date
c_otype_orgunit
changing g_retcd.
if g_retcd eq 0.
read table i_objects index 1.
g_orgeh = i_objects-sobid(8).
endif."g_retcd eq 0.
elseif not orgeh is initial.
call function 'RH_READ_OBJECT'
exporting
plvar = plvar
otype = c_otype_orgunit
objid = orgeh
istat = istat
begda = date
endda = date
langu = sy-langu
CHECK_STRU_AUTH = space "ASikaria, 10/15
exceptions
not_found = 1
others = 2.
if sy-subrc <> 0.
raise no_exist_orgeh.
exit.
endif.
g_orgeh = orgeh.
endif. "not pernr is initial.
if not g_orgeh is initial.
manager-orgeh = g_orgeh.
*-- Got org unit now find manager
perform zf_proc_get_om_objects tables i_objects
using c_otype_orgunit
manager-orgeh
plvar
c_rsign_b
c_relat_012
istat
date
date
c_otype_position
changing g_retcd.
if g_retcd eq 0.
read table i_objects index 1.
if sy-subrc eq 0.
manager-plans = i_objects-sobid.
call function 'Z_GET_POSITION_HOLDER'
exporting
plans = manager-plans
plvar = plvar
istat = istat
date = date
importing
pernr = manager-pernr
exceptions
position_not_exist = 1
position_invalid = 2
others = 3.
if sy-subrc <> 0.
clear: manager-pernr.
endif.
if not manager-pernr is initial.
*- BOC RTDK902962
*-- Obtained formatted name
clear: i0001.
refresh: i0001.
call function 'HR_READ_INFOTYPE'
exporting
pernr = manager-pernr
infty = c_infty_0001
begda = date
endda = date
importing
subrc = g_retcd
tables
infty_tab = i0001
exceptions
infty_not_found = 1
others = 2.
if sy-subrc eq 0.
read table i0001 index 1.
if sy-subrc eq 0.
manager-ename = i0001-ename.
endif.
endif.
*- EOC RTDK902962
*-- Obtain pernr information
*- Get 0002 data
clear: i0002.
refresh: i0002.
call function 'HR_READ_INFOTYPE'
exporting
pernr = manager-pernr
infty = c_infty_0002
begda = date
endda = date
importing
subrc = g_retcd
tables
infty_tab = i0002
exceptions
infty_not_found = 1
others = 2.
if sy-subrc eq 0.
read table i0002 index 1.
if sy-subrc eq 0.
manager-inits = i0002-inits.
manager-vorna = i0002-vorna.
manager-nachn = i0002-nachn.
manager-midnm = i0002-midnm.
endif.
endif.
*- Get 0105 data
clear: i0105.
refresh: i0105.
call function 'HR_READ_INFOTYPE'
exporting
pernr = manager-pernr
infty = c_infty_0105
begda = date
endda = date
importing
subrc = g_retcd
tables
infty_tab = i0105
exceptions
infty_not_found = 1
others = 2.
if sy-subrc eq 0.
describe table i0105 lines g_lines.
if g_lines > 0.
*- SAP usrid
loop at i0105 where subty = c_0105_usrid_subty.
manager-usrid = i0105-usrid.
endloop.
*- Email address
*// not sure where email is going to be stored but assume it is subtype
*// 0010
loop at i0105 where subty = c_0105_email_subty.
manager-email = i0105-usrid_long.
endloop.
endif. "g_lines > 0
endif."sy-subrc eq 0.
endif. "not manager-pernr is initial.
endif. "sy-subrc eq 0.
endif."g_retcd eq 0.
endif. "not g_orgeh is initial.
endfunction.
zposition holder
PLANS TYPE PLOG-OBJID Object ID
PLVAR TYPE PLOG-PLVAR '01' Plan Version
ISTAT TYPE PLOG-ISTAT '1' Planning Status
DATE TYPE SY-DATUM SY-DATUM Date and time, current (application server) date
PERNR TYPE P0001-PERNR Personnel Number
POSITION_NOT_EXIST Position does not exist
POSITION_INVALID Invalid position
function z_get_position_holder.
""Local interface:
*" IMPORTING
*" REFERENCE(PLANS) TYPE PLOG-OBJID
*" REFERENCE(PLVAR) TYPE PLOG-PLVAR DEFAULT '01'
*" REFERENCE(ISTAT) TYPE PLOG-ISTAT DEFAULT '1'
*" REFERENCE(DATE) TYPE SY-DATUM DEFAULT SY-DATUM
*" EXPORTING
*" REFERENCE(PERNR) TYPE P0001-PERNR
*" EXCEPTIONS
*" POSITION_NOT_EXIST
*" POSITION_INVALID
if plans cn '0123456789'.
raise position_invalid.
endif."plans cn '0123456789'.
if plans co '9'. "default position
exit.
endif.
call function 'RH_READ_OBJECT'
exporting
plvar = plvar
otype = c_otype_position
objid = plans
begda = date
endda = date
exceptions
not_found = 01
others = 02.
if sy-subrc ne 0.
raise position_not_exist.
else.
perform zf_proc_get_om_objects tables i_objects
using c_otype_position
plans
plvar
c_rsign_a
c_relat_008
istat
date
date
c_otype_pernr
changing g_retcd.
if g_retcd eq 0.
sort i_objects by begda descending. "get earliest rec
read table i_objects index 1.
if sy-subrc eq 0.
pernr = i_objects-sobid(8).
endif.
endif. "g_retcd eq 0.
endif. "sy-subrc ne 0.
endfunction.
regards,
venkat -
The broken image symbol appears in place of the images but associated web links do work ok.
Changing options to allow all remote content has no effect. Senders' addresses are in my address book and on the exceptions list.
Some emails (from other sources) load perfectly. Using Kaspersky Internet Security 2015 on Windows 8.1. Thunderbird 31.4.0
Any help appreciated.You only need to post a URL to your web site. We can see your code in Browser.
So, your page looks OK to me in Firefox, but when I tried to check it in IE, it choked my browser and closed it.
You have quite a few code validation errors - no document type declaration, etc... Start by fixing these reported errors.
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fntp.neuroscience.wisc.edu%2F
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com -
Client Change options in SCC4 (SAP ECC 6.0)
Hi,
Our SAP Development system SCC4 settings are as mentioned below:
1.Changes and transports for client-specific objects : Automatic recording of changes
2.Cross-client object changes : Changes to repository and cross-client customizing allowed
3.Protection regarding client copy/comparison,: Protection level 1: No overwriting
Please suggest me , above mentioned settings are correct?
Development users are complainting that they are getting error "SAP System has status 'not modifiable'", Can anyone please help me how to solve this problem?
Thanks in advance!!!!
Regards
VeeraSE06
@ clieck on
system change option
@ go to EDIT
software Comonents Modifiable
Name sapces Modifiable
own name space Modifiable
but if it is PRD system then i will Not suggest for client Modifiable..
Best of Luck
Thanks
Mithun Das -
The system and namespace change option
Hi Experts,
I want to integrate a certain SAP Source System within RSA1. After submitting the correct settings for Background User and RFC connection the process leads me to the Source System where I logon with an User which has authorizations in SM59. From there on (the RFC Connection backwards is already defined) I got asked whether I want to user/check/cancel this existing RFC Connection. I click on use, wait for a while and then the error (please see below) appears.
When proceeding with the steps mentioned in the error message (transaction SE03, Administration node, ...) I cannot find any IDOC Object ZSSA009. I think maybe it's related to some software component or somenthing like that which should be set as "modifiable" but I don't know which....
Any Ideas on this?
Many thanks in advance.
Best regards
Tobias
Error Message:
Message no. TO128
Diagnosis
The system and namespace change option set for this SAP System does not allow any changes to be made to object IDOC ZSSA009.
System Response
Editing is terminated, the object can only be displayed.
Procedure
If you want to edit the object IDOC ZSSA009 in this SAP System, have your system administator set the SAP System to "modifiable" for this object.
This can affect the modifiability of the namespace &1 or the namespaces that correspond to the pattern &1, as well as the global setting of the system change option.
The system change option is set using the Transport Organizer tools (Transaction SE03). Expand the Administration node and execute the program Set system change option. The options are described there.HI,
Attached link may help you in configuring the source system.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/908836c3-7f97-2b10-4cb8-e6790361c152
Thanks,
Arun -
New field in ME22n - Fast change option
Hi Experts,
I have a requirment to add new field (SLFDT - Statistical delivery date) in ME22N fast change option.Since the customer don't want to change the standard structures ,I have created append structure for MEPOITEM and MEGUI_MASSCH_ALLOWED_FIELDS. But the new field doen't display in the output, even it doesn't come in debugging mode.
I have added this field in debugging mode in both structures , at that time this field displays in fast change list.Kindly suggest me on this.
Also I am not able to find any relevent sap note for this scenario.
Regards,
SreejaHello ,
Good News on fast change layout .
i am able to add new fields on the layout and working .
we have to append structure with new fields in MEGUI_MASSCH_ALLOWED_FIELDS and MEPOITEM.
after that we have to reset the buffer .
regards,
Reddy -
Software components can keep modifiable in bw 3.5 system change options
hello experts,
can we keep software components modifiable in bw 3.5 production in system change option (se06)
it very urgentHi
Transaction SE06 - Processing After Installation of the CTO
Transaction SE06 has to be executed once in every newly installed R/3 System. This applies to an R/3 standard installation as well as the installation of a copy of an existing R/3 system.
Transaction SE06 provides the following functions for processing after installation:
Generating basic settings of the Change and Transport Organizer Closing other requests and tasks Setting the system change option
Meaning of the system name The system name (SID) is defined during the installation with R3setup and cannot be changed subsequently.
When you choose names, make sure that there are no naming conflicts with existing systems. Under no circumstances may two systems within an SAP system group have the same name.
The installation type of the R/3 System is specified in the initial screen:
R/3 standard installation
The R/3 System was installed from the SAP CD using R3setup. It is assumed that the system is running on a correct, delivered version of the R/3 System. No adjustments based on corrections or repairs have been made.
If you set up an R/3 System that originated from a database copy using this option, problems could arise when you upgrade or modify objects with the Change and Transport Organizer.
Database copy or database migration
The R/3 System was created on the basis of a copy. R3setup provides utilities to do this. The R/3 System needs to be assigned a new and independent role within the SAP system group or outside of it.
Before you connect the new R/3 System to the SAP system group, you have to give it a name that has not yet been used in the group.
You should avoid using a previously used system name as this could cause serious complications and may also lead to the loss of information.
If you have installed your SAP System as a copy of an existing SAP System then you must configure the CTS after installation.
In SAP Systems installed with R3setup from the SAP CD the basic settings for the CTS are generated during the configuration of the Transport Management System. You do not need to perform any processing after installation.
Transaction SE06 provides the following functions for processing after installation:
Generating basic settings of the Change and Transport System
Setting the system change option
Closing foreign requests and tasks
You must specify the installation type of the SAP System on the initial screen:
Standard installation
The SAP System was installed from the SAP CD using R3setup. It is assumed that the SAP System is running as a correct, delivered version. No adjustments based on corrections or repairs have been made.
If you set up an SAP System that originated from a database copy using this option, problems could arise when you upgrade the system or modify objects with the Transport Organizer.
Database copy or database migration
The SAP System was created on the basis of a copy. R3setup provides utilities to do this. The SAP System needs to be assigned a new and independent role within the SAP system group or outside of it.
Before you connect the new SAP System to the SAP system group, you have to give it a name that has not yet been used in the group.
Do not use an existing system name since this could cause serious conflicts and may lead to the loss of data. -
SE03 / SE06 System Change Option Scope
Hi All,
We are creating a source system from R/3 to BW in some specify step we need to change the System Change Option of the sistem in a particular client (SE06 -> System Change Option -> No Modifiable to Modifiable and Modifiable to No Modifiable).
My question is: This changes are Cross Client?
Or only apply to the specify client where you are logged?
Best Regards,
Erick IlarrazaOn their own, Global and Compenent specific change options are not client dependent as they are not related to the logical system of the ABAP user nor the master and transaction data (tables with field MANDT as key).
Personally, I think of it as a "call stack" of checks on whether and what you can modify. Perhaps "System Change Update-ability" would have been a better label, but that is not good English.
As the stack is released for a user in a client (a logical program system), the system determines what can be updated at different levels of the stack as it unfolds, a bit like a spring. At the top there is SE06. At the bottom of the spring there are individual authority-checks which are system, client, program flow and context, and user access dependent.
Depending on where in the stack you release the spring from and how you got there, your user can update parts of the stack. Often the term "logical systems" is used in connection with the client (SCC4 client), but also many others such as workflow etc.
=> If the user can pass authority-checks for access at the bottom of the stack (S_DEVELOP is the key control here), then they can also change that which the top of the stack was designed to control. If you can debug, then there is nothing which will stand in your way.
> My question is: This changes are Cross Client?
It depends. You still need to control access via authorizations within the client to secure access to the whole system.
Cheers,
Julius -
Publishing Error, and I have tried the Publish Site Changes option
I tried to update my website for the first time since upgrading and couldn't. I have tried the "Publish Site Changes" option as well as publishing the entire site, but am getting this error message:
An error occurred while publishing file “/private/var/folders/7R/7Ry8Tbdf2RW72E8ZQJxeU++TI/TemporaryItems/com.apple.iWeb636_TEMP_255615036_7/sites/Site/Musashino_Monday_4/Musashino_Monday_4files/Simps CloseUp.png”. Try publishing again later.
This has been going on for a couple of days...any idea what gives?Hi,
Error 7 is "No Data for 10 Secs" and is related to bandwidth issues.
It generally means the bandwidth dropped as you made the call.
This can be due to a number of factors.
As it is Comcast I would reboot your modem first as some peopel report thsi gets them their dful speed back.
After that talk to Comcast. They will not admit anything but things do seem to change.
10:02 PM Saturday; August 18, 2007 -
What is System Change Option Used For?
Hi,
I need help on security.
we use scc4 settings for client protection. the settings are 'No changes allowed' for client-specific objects and 'No Changes to Repository and cross-client customizing objects' for cross-client object changes.
system change options are set to 'Modifiable'. what is the difference between these settings? Is there any situation that may cause problems?
thanks,
- ferudunHi ,
No Changes allowed flag is explained as below
This flag means that changes in the customizing settings of the client
are not permitted (client lock).
However, customizing settings can be exported from the client by manual
creation of a transport request. A manual transport can be carried out
in the particular transaction for settings with the function Transport,
which places the selected customizing settings in a transport request.
In a productive client, the customizing settings that can be maintained
as "current settings" are excluded from the client lock; this means that
current settings (e.g. exchange rates, posting periods) can always be
maintained in the productive client
For 'No changes to Repository and cross cleint customizing objects' explained below
o Changes to the Repository and cross-client Customizing permitted
There are no restrictions on the maintenance of cross-client object
for the client when this setting is used. Both cross-client
Customizing objects and objects of the SAP Repository can be
maintained.
o No change to cross-client Customizing objects
Cross-client Customizing objects cannot be maintained in the client
with this setting.
o No change to Repository objects
With this setting, objects of the SAP Repository cannot be
maintained in the client.
o No change to Repository and cross-client Customizing objects
Combination of both restrictions: Neither cross-client Customizing
objects nor objects of the SAP Repository can be maintained in the
client.
Please reward if useful. -
Workflow notification mailer not starting after APPS pwd change
Workflow notification mailer not starting after APPS pwd change
The error in the WFMAILER log is
[appprod@nalinoes04 ABPROD_nalinoes04]$ cat WFMAILER1300061.txt
wferr:
- WFXXX_DB_CONNECT CODE=1017 CONNECT=APPS
cpid=1300061, logfile=/abprod/comn/admin/log/ABPROD_nalinoes04/WFMAILER1300061.txtparams=, status=Running, debuglevel= Error Done.[appprod@nalinoes04
Can you please advice ?
EBS 11.5.10.2
DB 11.2.0.1There is no upgrade, just a usual APPS password changeYou still need to bounce the application services.
The error you have posted above does not tell much about the issue. Please clear the log file, reproduce the issue, and check the log file then.The FNDCPGSC log file
[Oct 23, 2012 12:42:42 PM CDT]:1351014162195:Thread[BES Dispatch Thread,5,main]:0:-1:nalinoes05:172.25.80.54:-1:-1:EXCEPTION:[SVC-GSM-WFMLRSVC-1327162 : oracle.apps.fnd.cp.gsc.SvcComponentStateMachine.updateComponentStatus(Logger, Connection, int, String, String)]:BEGIN (Logger{mLog=[$Header: AppsLog.java 115.76 2004/07/27 17:30:17 kkapur ship $ @16720915 {oracle.apps.fnd.profiles.ExtendedProfileStore@9980d5}],mUniqueId=SVC-GSM-WFMLRSVC-1327162,mLevel=4}, oracle.jdbc.driver.OracleConnection@76ab2f, 10006, DEACTIVATED_SYSTEM, This automatic Service Component has been restarted the maximum of 10 times after stopping with error. Thus, it has been system deactivated -> oracle.apps.fnd.cp.gsc.SvcComponentContainerException: Could not start component; performing rollback -> oracle.apps.fnd.cp.gsc.SvcComponentException: Validation failed for the following parameters -> {OUTBOUND_SERVER=Unable to make a network connection.}. Parameters were -> {INBOUND_MAX_IGNORE_SIZE=1000, INBOUND_MAX_LOOKUP_CACHE_SIZE=100, ATTACH_IMAGES=Y, ALLOW_FORWARDED_RESPONSE=Y, INBOUND_UNSOLICITED_THRESHOLD=2, NODENAME=WFMAIL, SEND_UNSOLICITED_WARNING=Y, AUTOCLOSE_FYI=Y, INBOUND_PROTOCOL=IMAP, PROCESSOR_READ_TIMEOUT_CLOSE=N, ATTACHED_URLS=WFMAIL:ATTACHED_URLS, TEST_ADDRESS=NONE, PROCESSOR_OUT_THREAD_COUNT=1, EXPUNGE_ON_CLOSE=Y, ATTACH_STYLESHEET=Y, OUTBOUND_CONNECTION_TIMEOUT=120, INBOUND_MAX_RET_EMAIL_SIZE=100, MAX_INVALID_ADDR_LIST_SIZE=100, PROCESSOR_MAX_LOOP_SLEEP=60, SEND_ACCESS_KEY=N, PROCESSOR_IN_THREAD_COUNT=1, FRAMEWORK_APP=1, CLOSED=WFMAIL:CLOSED, INBOUND_FETCH_SIZE=100, SUMMARY=WFMAIL:SUMMARY, ENABLE_STYLESHEET=N, PROCESSOR_ERROR_LOOP_SLEEP=60, OPEN_MAIL_FYI=WFMAIL:XXAB_OPEN_IBE_WF_MAIL, FRAMEWORK_RESP=20420, ALTERNATE_EMAIL_PARSER=oracle.apps.fnd.wf.mailer.DirectEmailParser, INBOUND_PASSWORD=_!08^@@690^6@6$$^#9^#6#!0$04868!@$^86$!!`}0$8|&%%+++|9|*@, HTTP_USER_AGENT=Mozilla/4.76, RESET_NLS=N, PROCESS=PROCESSED, OPEN_MAIL_DIRECT=WFMAIL:OPEN_MAIL_DIRECT, PROCESSOR_LOOP_SLEEP=5, MESSAGE_FORMATTER=oracle.apps.fnd.wf.mailer.NotificationFormatter, [email protected], FRAMEWORK_USER=0, CANCELED=WFMAIL:CANCELED, OUTBOUND_PROTOCOL=SMTP, ACCOUNT=svc_oracle_mail, DISCARD=DISCARD, FROM=ACCO Workflow Mailer, PROCESSOR_DEFER_EVTDATA_READ=Y, SEND_CANCELED_EMAIL=Y, WARNING=WFMAIL:WARNING, PROCESSOR_MAX_ERROR_COUNT=10, INBOUND_CONNECTION_TIMEOUT=120, HTMLAGENT=http://nalinoes04.abd.ad.acco.com:8000/pls/ABPROD, INBOX=Inbox, OPEN_INVALID_MORE_INFO=WFMAIL:OPEN_INVALID_MORE_INFO, INBOUND_SERVER=lin-hera.na.acco.com, OUTBOUND_SSL_ENABLED=N, OPEN_MORE_INFO=WFMAIL:OPEN_MORE_INFO, MAILER_SSL_TRUSTSTORE=NONE, INLINE_ATTACHMENT=N, OPEN_INVALID=WFMAIL:OPEN_INVALID, EMAIL_PARSER=oracle.apps.fnd.wf.mailer.TemplatedEmailParser, DIRECT_RESPONSE=N, OPEN_MAIL=WFMAIL:OPEN_MAIL, MORE_INFO_ANSWERED=WFMAIL:MORE_INFO_ANSWERED, HTML_DELIMITER=DEFAULT, FRAMEWORK_URL_TIMEOUT=30, COMPONENT_LOG_LEVEL=5, SUMHTML=WFMAIL:SUMHTML, PROCESSOR_READ_TIMEOUT=10, DEBUG_MAIL_SESSION=Y, OUTBOUND_SERVER=nalinoes04.abd.ad.acco.com, INBOUND_SSL_ENABLED=N})
Please see these docs.
How to Troubleshoot 'Validation failed' Errors when Starting the Mailer [ID 463354.1]
Unable To Make A Network Connection For IMAP Username/Password In Workflow Mailer Configuration [ID 784247.1]
Workflow Cannot Connect to IMAP Sever: "Unable to Make a Network Connection" [ID 577592.1]
Error Validation Error Has Occurred: Unable To Make A Network Connection During Mailer Setup [ID 834054.1]
Unable To Connect To The Mail Account. Check The Host, User Name And Password [ID 1123684.1]
How to Perform a Meaningful SMTP Telnet Test to Troubleshoot Java Mailer For Sending Email Notifications [ID 753845.1]
Workflow Mailer Will Not Start Stays In Starting Status [ID 837893.1]
Thanks,
Hussein -
Please Confirm: Can a user change options in Viewer?
In Discoverer 4i Viewer, can the user change options such as show null values as blank and warn me if the query will take longer than 'n' seconds?
Thanks,
-DGYes.
Click on the 'Options' icon in the upper right hand frame of the window (not the presentation options link above the worksheet, but rather the Viewer options).
This will let you set both the query governor and null settings you are interested in.
Maybe you are looking for
-
Yesturday I built a computer from all brand new parts listed in my sig. However, the motherboard can't seem to detect any IDE drives. It is not crashing, it just says 'None' on the 4 IDE devices. I even tried connecting just the one DVD drive as the
-
Delivery creation date field in STO
Friends, I have created 2 STO's ...for 1st STO i can see the delivery creation date in Shipping tab......however for 2nd STO shipping tab is there but the delivery creation date field is blank... what could be the reason...how this gets calculated ?
-
CLID restriction for Contact Center Calls
Hi, One of our customers has a stalker and they have asked from the telco to send the Calling Line ID for the mobile calls which are normally blocked by the calling person. When these calls are to a Callmanager user, they cannot see the caller ID as
-
ICal - Migration from 10.4.11 to 10.5.2
Hi ! I have just moved from a 10.4.11 system to a new Intel Xserve 10.5.2 Most of my users are still using 10.4.11 client systems. On my original 10.4.11 server, users published their calendars to /Library/WebServer/Documents/Calendars where the publ
-
Streaming from iPad, through an app and the streaming will stop unless I touch the screen which seems to wake it up and will begin from where it stopped. Can anyone tell me why it does this? Kind of makes watching something a little annoying. It's as