Px4-300d recovery don't work

Hello,
I have a px4-300d with version 4.1.110.33149 and with 4 dd 3TB.
I am raid 5 mode with data 2to top.
I had a crash dd No. 3 and I followed the replacement procedure for the new dd (clean).
I replaced the dd and data recovery process is started. I know this is long but it's been two days since ca shows 0 % and I can not enter to the interface. The white top light flashes every second and the blue LED below blinks once every 30 seconds .
The stop button stops responding over time unless I support and that makes a sudden stop. I raised the same procedure twice and it does the same thing every time. I am in the same situation it has been two days since it is blocked.
Do you have a solution to this problem ? 

hello,I have a px4-300d with version 4.1.110.33149 and with 4 dd 3TB.I am raid 5 mode with data 2to top.I had a crash dd No. 3 and I followed the replacement procedure for the new dd (clean).
I replaced the dd and data recovery process is started.I know this is long but it's been two days since ca shows 0 % and I can not enter to the interface.The white LED flashes every second and the blue LED below blinks once every 30 seconds .The stop button stops responding over time unless I support and that makes a sudden stop.I raised the same procedure twice and it does the same thing every time.I am in the same situation it has been two days since it is blocked. Do you have a solution to this problem ?

Similar Messages

  • F11 Recovery don`t work - error Windows failed to start

    After downloading MS updates don`t work administrator password. I try F11 Recovery and see black screen: windows failed to start. A recent hardware or software change might be the cause ...
    File: \windows\system32\winload.efi
    status: 0x0000001
    Info: The application or operating system couldn't be loaded because a required is missing or contains errors.
    ?Any ideas?
    This question was solved.
    View Solution.

    1) Maybe I misunderstood something, but I thought that the function f11 restores preinstalled Windows from the hidden partition on the disk.
    2) I created a boot disk with Windows 8 Pro on USB and tried to boot from it through Boot manager. Beyond the first installation screen did not go.
    3) As for your advice to contact the dealer, so I did yesterday. The tablet was taken away for examination by 20 days...
    It's very sad, it was a gift to my father for Christmas.
    I work for a long time as the system administrator and am dealing with HP servers. It is a pity that such a reputable company can not provide the quality of their tablets. 
    I advised my daughter Windows tablet, but she wished to have iPad. Now I see that she was right - a year she has no problems with it. Windows tablet - this is not the best choice for a child or an old man.

  • G550 stop error 0x0000000a - One Key Recovery don't work

     I am getting this IRQ_NOT_LESS_OR EQUAL - BSOD  Stop: 0x000000A (0x00000030, 0x00000002, 0x00000000, 0x82F39D46)
    I can't get into regular or safe mode, startup repair don't work either.   When I push the ONEKEY recovery it won't boot into the recovery partition so I can get back to defaults either.  I don't have the discs created so that is not an option unless I order them from Lenovo.
    I ran ChkDsk and it did fix some things but no go.   Any ideas from other or Techs with this issue.  It just be a windows update or something that updated and I did not know about.  Please advise....  FYI - it is few months out of warranty, par for the course.  Thanks!

    May be a hardware ram problem.
    Test with Memtest or swap in known good ram.
    Memtest is not infallible, so testing with other ram is best.
    A repair shop may do this cheap?

  • Photoshop don't work he said

    HI, I Hope that someone can help me...
    My problem is that photoshop afther years not started anymore.  He don't going further.
    Do somebody know how I can find the problem? I work with Vista and system recovery don't work by my computer.
    Thanks, I hope you can help me.
    Laura

    I don't have the install because I get it in 2010 and the person gave it to me I don't speak. That make it hard, to find it out.
    But I think it is something in my computer, but I don't know what. I didn't change something, what I know.
    Other Idea's?

  • PX4-300d media server don't work

    My media devises can't see all the media files, only a few. When i force a mediascan, it's some other of my files they can see. It worked when i got the PX4-300d and i have not changed any settings, only upgraded the firmware everytime a new was avalibel. All files is shown when i browse from a laptop with Windows.
    What to do to get it working again?
    BR Johnny.

    Floppy3,
    You would need to contact support for an imager:
    https://lenovo-na-en.custhelp.com/app/ask/
    -or-
    Sometimes you can find them places like Nas Central:
    http://www.nas-central.org/wiki/Main_Page
    Are there any obvious differences between the files that it can and can't see?
    Size, files extensions, naming conventions, etc?

  • Satellite A300-243 - Easy Keys & Recovery Disc don't work

    Hi, I just bought a new Toshiba Satellite A300 243 and I decided to reinstall system to Vista Ultimate 64 bit (because of the 4GB ram usage).
    It took me a few hours, but in the end I found all needed drivers and everything is working fine, except one thing - those multimedia keys (I think they're called Easy Keys). Start, Stop, Next track and Preview track works fine, but the first (by default used for toggling illumination) and the second (by default used for starting W Media Player) just don't work. I have installed the latest version of VAP for 64 bit Vista and in Toshiba Button Support I'm not able to change anything. The list, where normally I'm able to choose a key to edit its function, is empty. I found a few similar problems on this forum, but without any useful answer - lookes like the only way is to use the Toshiba Recovery option, and at this point I'm getting to my second problem.
    The second problem is in Toshiba Recovery Disc Creator and Toshiba HDD Recovery tool. At first, before I reinstalled Vista to 64 bit version I wanted to create Recovery Disc, but Toshiba Recovery Disc Creator just didn't started. Then I found the HDD Recovery option, and I read, that this tool is placed on a hidden partition, so I thought I will be able to recover the old system with this tool in case of any compication. So I reinstalled the system and wanted to go back to 32 bit, because it looked like its slower and at first I wasn't able to find all necessary drivers. And what a surprise - Recovery tool disappeared!
    Now the only thing I'm missing on 64 bit version is those two multimedia keys.
    And the last question - is there any chance to get a Recovery Disc with Vista 64 bit?

    Hello
    As you said for the easy keys or also called illumination buttons you need the Toshiba Value Added Package. The Satellite A300-243 belongs to the PSAG8E series and therefore you can find all drivers and tools on the Toshiba website:
    http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
    Before you install the VAP, make sure that all drivers are installed and SP1 for Vista at least. Then you can install it and normally then you can use the FN keys, illumination buttons, etc.
    Make also sure that you have installed the newest BIOS for your notebook.
    About your problem with the recovery disk creator and HDD recovery option I can only say that these features are only available on the preinstalled Vista version. That means if you upgrade to Vista 64bit you cant use the HDD recovery option anymore and also the recovery disk creator.
    So if the recovery disk creator doesnt work you should use the HDD recovery option but this is not stored on a hidden partition. These files are stored on the second partition of HDD in the folder HDDrecovery. The hidden partition that you mean belongs is a Vista feature: http://en.wikipedia.org/wiki/Windows_Recovery_Environment
    But just one question: Did you already create a recovery disk?
    Greets

  • Recovery Disks don't work

    Toshiba Satellite M40X-RH4E   Windows XP SP3
    Think malware Katuska virus not sure.  Got to safe mode initially but could not navigate.  Decided to reformat.  Reformat not working.  Get to Easy recovery screen, then goes thru motions, takes about a half hour, get screen "system needs reboot click ok"... then click to reboot but only get black screen and cursor.  Nothing more.  Done this repeatedly.
    Could the HD be toast?  How would I tell?
    Have been using the F8 key, but is there a different key to make the recovery cd work? 
    The recovery cd is the set with product key that came from Toshiba when laptop was purchased.
    Is there any way to load only windows XP from the recovery cd?  Can't read the one file from the recovery cd  when looking on my new Win 7 laptop.
    Is there something to download that will get recovery cd to work?  Can I do this on a windows & laptop and use CD on old WinXP laptop that isn't working?
    There must be something I'm not doing,or am doing wrong.
    Any assistance is appreciated.

    I have a Toshiba Satellite C650-S5132 and i made 4 dvd recovery disks.And the labtop said there wasnt nothing on any of the DVDs.When i know i burned them right.So how can i use them to reformate the labtop???This is my FIRST labtop.My girlfriend didnt want it and she bought a new labtop.So i need to reformat or restore the labtop.I cant afford to buy the recovery dvds.The Seria lnumber is XXXXXX and Model name is Toshiba C655-S5132.If you need the part number let me know.
                                                                  Fred Schall Jr

  • Recovery discs don't work, Toshiba wants $25? - Qosmio G35-AV660

    I have a Qosmio G35-AV660. Basically, my recovery discs don't work. The first one does, but when it asks for the second one, I put it in, and it just spins and spins, and then pops out and it asks for the second disc again. I called Toshiba about this, and they went through the spiel about how it costs $25 and how it's not their fault, and that's the price for them to get it from this other company. I told them that I was willing to send my discs in, to verify that they aren't working right, and that I'm not trying to cheat them out of a free set of discs, but they wouldn't hear of it.
    I just want to be able to get QosmioPlayer working again, and the only way I can do that is with the recovery discs, and there's no way I'm paying $25 for something I already have, that should work, but doesn't, for no reason whatsoever.
    If anybody can help me out, either with a disc image (I only need the second disc), or a spare second disc, I'd be incredibly grateful.

    Also, I can prove that I own both discs, either with pictures, or MD5 keys, or whatever.

  • PX4-300d is blocked in startup with 95% for 2 days already ! HELP !

    Hi 
    My PX4-300d 4 disks 1 Tb , has 1 year and gave an alert about disk01 . Made a restart from EMC control panel ( normally this was solved this way in my old Iomega NAS) and now after power up a bar with 95% is presented on LCD and i cant get acess to nothing . this is already for 48 h , cant be a rebuild of the RAID , itsblocked ...
    status led is off - 
    drive led  is blinking sometimes 
    What shall i do to try to recover my info?
    1-power off ? 
    2-remove and substitute drive that gave error? theorically system should work with only 3 drives ,  
    3-back button reset ? 
    Regards 
    Solved!
    Go to Solution.

    I'm sorry, I thought you already had a spare drive available. If you bought your device a year ago and registered it, then it should still be in warranty. Or if you have the original purchase receipt, they will be able to update your warranty and replace the hard drive for you per the warranty.
    You might have to shut down the device when you replace the hard drive (I would shut the device down anyway to avoid further problems and data loss). Your data should still be there as long as no other drives fail. If you need to do data recovery on the hard drives, you can connect them to a Linux based device that will be able to read from the drives and retrieve the data.
    Have questions and need answers?
    Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!
    LenovoEMC Support & Downloads
    LenovoEMC North America Support Contact Page

  • Px4-300d empty shares after rstart

    Hello,
    i'm having a MAJOR issue with a PX4-300D unit in which all shares ARE EMPTY.
    unit has been working nonstop for 2 weeks, already running latest 4.0.6.19294.
    It has 2 volumes, each one with different shares(and different snapshot).
    I needed to add an extra share so i try to open the management web and i get a "you do not have permission to browse /, use /manage" so i use /manage, different error this time "resource does not exist", files and shares remain perfectly accesible, front panel is "all blue", no alerts on LCD, nothing.
    I decide to reboot the unit then, ~15min later it's still shutting down...., so i force a shutdown.
    After starting, i can access the management web ok, event log shows snapshots being created and then a weird "unit has been removed from the system" on 31/1 and then the shutdown restart today.
    I also removed mcafee app as it requires security and it's not desirable right now.
    THEN when i opened the shares, THEY'RE EMPTY!!!!!!!!!!!.
    the snapshots also stop at the 31 and only for one volume(the other isn't showing anything), if i try to expose a snapshot for everyone(as a share), it doesn't appears when browsing the machine!!!(but appears as a share on the share list).
    checking with SSH i can see the share on the 2nd volume on mnt/volumes and the contents appear ok(haven't copied them to double check), but the other folder are all empty
    i need to recover these files at all cost, the data is extremely important!(i'm working with support as well but time is of utmost importance)

    Hi Mastsrl,
    Unfortunately, there are only a few options in this situation. If support cannot rebuild the RAID and get the data back using SSH then you will need to have a data recovery service retrieve the data. It is important to have your data backed up to multiple locations in case situations like these occur.
    Have questions and need answers?
    Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!
    LenovoEMC Support & Downloads
    LenovoEMC North America Support Contact Page

  • Px4-300d copy job setup problem. Firmware version 4.1.108.32627

    Hello. 
    I have a wierd problem with copy job setup on my  px4-300d (4.1.108.32627) . I was able to set up one job, where I take a folder from my NAS and put it to a remote machine. That job ran fine. 
    When I go to setup a similar job but for a different folder, I have two possible outcomes: 
    1. When I go to chose the remote folder I see it fine and the job is setup fine as well. However when I run the job it throws an error. And in the log I see that instead of going to the folder I setup like "\\remoteserver\backupfolder" it's going to "\\remoteserver\u_myremoteserverusername\backupfolder" , which is obviously not there. 
    2. I can see my remote server, but I don't see my shares on it. I don't get no "Access denied" error or anything - I simply don't see any shares on that particular server. I do see shares on other servers, which use the same credentials. In addition the job that I was able to set up previously stops working. 
    Then when I reboot, the first job (the one setup successfully) may or may not properly run, yet I still cannot set up the second job. 
    I did check permissions and all the stuff that you would regularly check (connectivity, ports etc). Seems to me the script that is being generated from the UI is a bit too smart and is in fact outsmarting the NAs itself. 
    I also suspect that the fact that I could set up the first job and not the second is that the second job goes to a subfolder of a shared folder. Or that the shared folder's name starts with an underscore "_" . But these are just my guesses - I cannot verify this yet. 
    Any ideas how to fix this or how to bypass the problem? 
    Thanks. 

    Hello fimine
    I recommend double checking that the remote server's folders that are not being seen by the px4 are infact shared from that remote machine.  If they are not, copy jobs will have problems accessing the folders.
    I also recommend trying to use the remote machine's ip address for now to see if there is any change in behavior.
    If the issue does not happen when using the ip address, it my be an issue with how your network's DNS is setup.
    LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
    US and Canada: https://lenovo-na-en.custhelp.com/
    Latin America and Mexico: https://lenovo-la-es.custhelp.com/
    EU: https://lenovo-eu-en.custhelp.com/
    India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
    http://support.lenovoemc.com/

  • PX4-300D blocked 95%

    Hi,
    Yesterday I switched on the PX4-300D and it was blocked starting up at 95%. I don't have access to the web page and I can't do anything.
    I shutted down pressing the power button for a long time and I restarted it but it keeps at 95%
    I have sent an email to the support contact but I haven't receive an answer.
    What can I do?
    Thanks.

    Hello danijoint
    Usually devices hanging at 95% boot is due to a firmware or disk error. 
    I recommend that you try the following:
    -- power off th unit, re-seat all disks, then try booting again.
    -- If you were receiving an error for a specific disk before this began, please remove the disk and try booting without it.
    -- try swapping disk 1 with one of the other disks in the unit while powered down. Then try booting again. 
    -- If the above does not work, you can try disk/bay isolation by trying to boot the unit each disk one at a time, we recommend trying each disk in each bay.
    -- If there is still no change, try booting the unit without disks to see if the unit can boot on it's own as it should.  
    Please contact support if there is not change or if it can't boot on it's own.
    LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
    US and Canada: https://lenovo-na-en.custhelp.com/
    Latin America and Mexico: https://lenovo-la-es.custhelp.com/
    EU: https://lenovo-eu-en.custhelp.com/
    India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
    http://support.lenovoemc.com/

  • Unable to enable security and create admin user after reset - px4-300d

    Our px4-300d became inaccessible a few days ago.  I couldn't get to any shares from any machine, and I couldn't get to the admin console.  When I checked the unit, there was no indication that anything was wrong (ie - the panel didn't show any failure, I didn't get any emails indicating a failure, and there were no lights offering a clue to what was wrong).  However the unit was completely frozen...the buttons on the front would not scroll through the different information on the panel.
    I attempted to reset the device using the pinhole on the back, but the device wouldn't respond, so I had to power it down using the button on the front.  When I tried to power it back up, it would come on for about one second, then immediately power off.  I pulled all 4 drives out and powered it on again without any drives.  This time it came up completely and I got a message on the panel that drives were missing.  I started putting the drives in one at a time and the device recognized them all and I was able to login to the admin console.  However, all the shares were missing and I received an email that the Storage Pool was degraded.  I rebooted the device from the admin console and when it came back up, it started reconstruction.  After a few hours, it completed, but I still had no shares and couldn't create any new shares.  I also did not see any of my users, including the admin account I was logged in with.  I tried to create a new user, and also tried creating a user I knew existed and neither one worked.  The screen would just flash but nothing would show up.  At this point, I decided to try to reset using the pinhole on the back of the device to reset the admin user so I could just create a new one.  So, now I'm stuck at the 'Enable Security' screen.  Every time I try to create an admin account, it just flashes and returns me to the same 'Enable Security' window.  
    Now what?
    Solved!
    Go to Solution.

    If you are unable to get into it you will not be able to do the factory reset. You can try booting in buy removing one disk at a time. If you are still unable to then tech support should be able to supply you with the imager and try flashing it. I would keep it at 4.0.8 also,

  • HT1212 I am locked out of my iphone. In resetting my passcode I must have hit a wrong digit, because the 4 digits I thought I used Don't work (and of course not my old passcode).  I have tried the instructions both for "if you have previously synced your

    I am locked out of my iphone. In resetting my passcode I must have hit a wrong digit, because the 4 digits I thought I used Don't work (and of course not my old passcode). I have tried the instructions both for "if you have previously synced your device with iTunes" and "If you have Never synced your device with iTunes" . Neither has worked and I'm in a vicious circle with each time after lengthy downloads it still all ends with the program, & my phone, asking for my passcode to proceed.  I'm not sure if I have ever synced to my mac book (i may have) but my address book seems to automatically update on both devices without the need to plug in. Thank you for any knowledgable help that could efficiently get me  out of this passcode ****!

    Hi DRussell,
    If you have not sync'd your device to your Mac then you will have to force the phone into recovery mode and restore as a new device. Read the information in this link and follow the instructions to recover the phone:
    http://support.apple.com/kb/HT1808
    Hope this helps!
    Cheers,
    GB

  • Yosemite (10.10.3). Any browser don´t work with by wifi

    Hi
    I think i have the same problem that most the Mac users have had after upgrade from Mavericks to Yosemite (10.10.3) and are connected to internet by wifi.
    This new version don´t work fine, or in any way, with any internet browser (Safari, Mozilla, Crome...) when the connection it´s by WiFi. In fact i´m writing this with a ethernet cat 5e connection.
    I read in other thread that version 10.10.3 solved this problem but at least in my case it's not true.
    And like other users as i read, in some normal actions, like open "System Preferences", appears the wheel round and round during two o three seconds, when with Maverick don´t happens. Probably this last problem it´s a question of RAM memory, but nothing in the upgrade said that you need more that 8 GB to work with normality like before.
    Below this you have the Etrecheck report.
    Thanks in advance and greetings from Madrid
    Problem description:
    Yosemite (10.10.3). Wifi don´t work with any browser
    EtreCheck version: 2.1.8 (121)
    Report generated 12 de abril de 2015, 20:44:10 CEST
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (13-inch, Early 2011) (Technical Specifications)
        MacBook Pro - model: MacBookPro8,1
        1 2.7 GHz Intel Core i7 CPU: 2-core
        8 GB RAM Upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 29
    Video Information: ℹ️
        Intel HD Graphics 3000
            Color LCD 1280 x 800
    System Software: ℹ️
        OS X 10.10.3 (14D131) - Time since boot: 0:42:4
    Disk Information: ℹ️
        TOSHIBA MK5065GSXF disk0 : (500,11 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Macintosh HD (disk0s2) / : 499.25 GB (275.44 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
        MATSHITADVD-R   UJ-8A8
    USB Information: ℹ️
        Apple Computer, Inc. IR Receiver
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. Apple Internal Keyboard / Trackpad
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Configuration files: ℹ️
        /etc/hosts - Count: 30
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Applications/VMware Fusion.app
        [not loaded]    com.vmware.kext.vmci (90.6.3) [Click for support]
        [not loaded]    com.vmware.kext.vmioplug.14.1.3 (14.1.3) [Click for support]
        [not loaded]    com.vmware.kext.vmnet (0249.89.30) [Click for support]
        [not loaded]    com.vmware.kext.vmx86 (0249.89.30) [Click for support]
        [not loaded]    com.vmware.kext.vsockets (90.6.0) [Click for support]
            /Library/Application Support/MacKeeper/AntiVirus.app
        [not loaded]    net.kromtech.kext.AVKauth (2.3.7 - SDK 10.9) [Click for support]
        [loaded]    net.kromtech.kext.Firewall (2.3.7 - SDK 10.9) [Click for support]
            /System/Library/Extensions
        [loaded]    com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) [Click for support]
        [not loaded]    com.emu.driver.EMUUSBAudio (1.4.0 - SDK 10.6) [Click for support]
        [loaded]    com.hzsystems.terminus.driver (4) [Click for support]
        [not loaded]    com.macvide.driver.MacVideAudioConnectorDriver (1.0.0) [Click for support]
        [not loaded]    com.roxio.BluRaySupport (1.1.6) [Click for support]
        [not loaded]    com.wacom.kext.wacomtablet (6.3.7 - SDK 10.8) [Click for support]
            /Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
        [not loaded]    com.roxio.TDIXController (2.0) [Click for support]
    Startup Items: ℹ️
        MySQLCOM: Path: /Library/StartupItems/MySQLCOM
        Startup items are obsolete in OS X Yosemite
    Problem System Launch Daemons: ℹ️
        [failed]    com.apple.mtrecorder.plist
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.CS5ServiceManager.plist [Click for support]
        [loaded]    com.divx.dms.agent.plist [Click for support]
        [loaded]    com.divx.update.agent.plist [Click for support]
        [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
        [running]    com.wacom.wacomtablet.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.adobe.SwitchBoard.plist [Click for support]
        [failed]    com.apple.spirecorder.plist
        [loaded]    com.bombich.ccc.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2.Agent.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
        [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
        [running]    com.zeobit.MacKeeper.AntiVirus.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Click for support]
        [running]    com.zeobit.MacKeeper.Helper.plist [Click for support]
    User Login Items: ℹ️
        Mail    Aplicación Hidden (/Applications/Mail.app)
        Dropbox    Aplicación  (/Applications/Dropbox.app)
    Internet Plug-ins: ℹ️
        JavaAppletPlugin: Version: Java 8 Update 31 Check version
        WacomNetscape: Version: 2.1.0-1 - SDK 10.8 [Click for support]
        OVSHelper: Version: 1.1 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 [Click for support]
        FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        DivX Web Player: Version: 3.2.4.1250 - SDK 10.6 [Click for support]
        Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        iPhotoPhotocast: Version: 7.0 - SDK 10.8
        QuickTime Plugin: Version: 7.7.3
        SharePointBrowserPlugin: Version: 14.0.0 [Click for support]
        DirectorShockwave: Version: 12.0.3r133 - SDK 10.6 [Click for support]
    User internet Plug-ins: ℹ️
        Google Earth Web Plug-in: Version: 7.1 [Click for support]
    Safari Extensions: ℹ️
        iMedia Converter Deluxe
        iTube Studio
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        Java  [Click for support]
        MySQL  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Mobile backups: OFF
        Auto backup: NO - Auto backup turned off
        Volumes being backed up:
        Destinations:
            Time Machine [Local]
            Total size: 499.76 GB
            Total number of backups: 2
            Oldest backup: 2012-11-25 14:45:01 +0000
            Last backup: 2012-11-26 22:08:06 +0000
            Size of backup disk: Excellent
                Backup size 499.76 GB > (Disk size 0 B X 3)
    Top Processes by CPU: ℹ️
            18%    WindowServer
             0%    fontd
             0%    AppleSpell
             0%    taskgated
             0%    SystemUIServer
    Top Processes by Memory: ℹ️
        481 MB    MacKeeper Helper
        275 MB    AntiVirus
        215 MB    firefox
        172 MB    softwareupdated
        129 MB    mds_stores
    Virtual Memory Information: ℹ️
        3.04 GB    Free RAM
        3.49 GB    Active RAM
        668 MB    Inactive RAM
        1.39 GB    Wired RAM
        1.66 GB    Page-ins
        0 B    Page-outs
    Diagnostics Information: ℹ️
        Apr 12, 2015, 08:00:37 PM    Self test - passed
        Apr 12, 2015, 07:58:07 PM    /Library/Logs/DiagnosticReports/System Preferences_2015-04-12-195807_[redacted].hang

    Hi again Linc
    Sorry for de delay but i have receive the famous e-mail:
    "Hello!
    My name is Josephine Bergson representing the advertising department of the LLI Consulting company..." thats offers 950$ for put a banner in your web site!!. For that it´s necessary to run one supposed applet of Java, and after do that i have been checking, and apparently does nothing.
    Well. I have done old you tell me in your response and here you have the result of your "Diagnostic Test". Only one thing for you information: the wifi connection have works fine during two hours but fails run the  "Diagnostic Test". I want explain that the failures of wifi connection are intermittent.
    Thanks again. Wait for your answer
    Greetings
    Jesus
    Start time: 01:55:22 04/13/15
    Revision: 1311
    Model Identifier: MacBookPro8,1
    System Version: OS X 10.10.3 (14D131)
    Kernel Version: Darwin 14.3.0
    Time since boot: 3:28
    UID: 501
    SerialATA
        TOSHIBA MK5065GSXF                     
    FireWire
        eGo Rugged FW USB2 (iomega)
    USB
        Compact Optical Mouse 500 (Microsoft Corporation)
        Intuos5 touch S (WACOM Co., Ltd.)
        USB SMART CARD READER (C3PO)
        Storage (Iomega Corporation)
        Storage (Iomega Corporation)
        Deskjet F4100 series (Hewlett Packard)
    Bluetooth
        Apple Magic Mouse
        Apple Wireless Keyboard
    Activity
        CPU: user 10%, system 7%
        en1: in 636, out 19 (KiB/s)
    CPU usage (%)
        WindowServer (UID 0): 25,8
    Energy (lifetime)
        kernel_task (UID 0): 9.88
        WindowServer (UID 88): 6.97
    Energy (sampled)
        Safari (UID 501): 8.70
        storedownloadd (UID 501): 6.39
    DNS: 80.58.61.250 (static)
    Listeners
        kdc: kerberos
        launchd: afpovertcp
    Wi-Fi
        Security: WPA Personal
    Diagnostic reports
        2015-04-12 System Preferences hang
        2015-04-13 WacomTabletDriver crash
    HID errors: 11
    Kernel log
        Apr 11 16:13:39 vmnet: netif-vmnet8: SIOCPROTODETACH failed: 16.
        Apr 11 19:39:08 MacAuthEvent en1   Auth result for: 00:19:15:d0:8a:84 Auth request tx failed
        Apr 11 19:51:05 firefox (map: 0xffffff801d7fb0f0) triggered DYLD shared region unnest for map: 0xffffff801d7fb0f0, region 0x7fff8ec00000->0x7fff8ee00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
        Apr 12 19:55:00 firefox (map: 0xffffff8040abe960) triggered DYLD shared region unnest for map: 0xffffff8040abe960, region 0x7fff90e00000->0x7fff91000000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
        Apr 12 20:01:34 [BNBMouseDevice][waitForHandshake][58-1f-aa-fc-6b-e9] Timeout waiting for handshake
        Apr 12 20:01:34 [BNBMouseDevice::_simpleSetReport][85.3] ERROR: setReport returned error 0xe00002d6 for reportID 0xD7
        Apr 12 20:01:34 [BNBMouseDevice::_enableMultitouchEvents][85.3] ERROR: _simpleSetReport returned error 0xe00002d6
        Apr 12 20:01:35 [AppleBluetoothHIDKeyboard][waitForHandshake][40-30-04-07-71-f9] Timeout waiting for handshake
        Apr 12 20:01:35 [AppleBluetoothHIDKeyboard][interruptChannelOpeningWL] final device setup failed
        Apr 12 20:01:35 [AppleBluetoothHIDKeyboard][sendData][40-30-04-07-71-f9] commandSleep in sendData returned an error
        Apr 12 20:01:37 [BNBMouseDevice][waitForHandshake][58-1f-aa-fc-6b-e9] Timeout waiting for handshake
        Apr 12 20:01:37 [BNBMouseDevice::_simpleSetReport][85.3] ERROR: setReport returned error 0xe00002d6 for reportID 0xD7
        Apr 12 20:01:37 [BNBMouseDevice::_enableMultitouchEvents][85.3] ERROR: _simpleSetReport returned error 0xe00002d6
        Apr 12 20:01:47 ### ERROR: Exit sniff failed (probably already unsniffed) (err=10)
        Apr 12 20:01:48 ### ERROR: opCode = 0x0406 (Disconnect) -- send request failed (err=0x0010 (kBluetoothHCIErrorHostTimeout))
        Apr 12 20:30:50 firefox (map: 0xffffff8016b324b0) triggered DYLD shared region unnest for map: 0xffffff8016b324b0, region 0x7fff89400000->0x7fff89600000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
        Apr 12 22:19:55 Kext com.apple.driver.AppleIntelSlowAdaptiveClocking failed to loadCouldn't alloc class "AppleThunderboltEDMSink"
        Apr 12 22:19:55 Failed to load kext com.apple.driver.AppleIntelSlowAdaptiveClocking Couldn't alloc class "AppleThunderboltIPService"
        Apr 12 22:21:10 [AppleBluetoothHIDKeyboard][sendData][40-30-04-07-71-f9] commandSleep in sendData returned an error
        Apr 12 22:21:13 [AppleBluetoothHIDKeyboard][waitForHandshake][40-30-04-07-71-f9] Timeout waiting for handshake
        Apr 12 22:21:13 [AppleBluetoothHIDKeyboard][interruptChannelOpeningWL] final device setup failed
        Apr 12 22:21:13 [AppleBluetoothHIDKeyboard][waitForHandshake][40-30-04-07-71-f9] Timeout waiting for handshake
        Apr 12 22:21:15 [AppleBluetoothHIDKeyboard][getExtendedReport] getReport returned error e00002d8
        Apr 12 22:21:21 [IOBluetoothHCIController][handleACLPacketTimeout] -- Disconnecting due to device not responding (ACL Packet timed out) for connection handle 0xb
        Apr 12 22:31:47 considerRebuildOfPrelinkedKernel com.apple.kext.OSvKernDSPLib triggered rebuild
    System log
        Apr 13 00:47:36 WindowServer: window 130 is already attached to window 12b
        Apr 13 00:47:43 WindowServer: WSGetSurfaceInWindow : Invalid surface 1086438165 for window 298
        Apr 13 00:47:43 WindowServer: WSGetSurfaceInWindow : Invalid surface 1086438165 for window 298
        Apr 13 00:47:43 WindowServer: WSGetSurfaceInWindow : Invalid surface 1086438165 for window 298
        Apr 13 00:53:05 fseventsd: Logging disabled completely for device:1: /Volumes/Antivirus for Mac
        Apr 13 00:53:46 BDCoreIssues: VerifyLo_(com.bitdefender.coreissues.issues.plist): 22
        Apr 13 00:53:46 BDCoreIssues: VerifyLo_(state.txt): 22
        Apr 13 00:55:39 WindowServer: WSGetSurfaceInWindow : Invalid surface 1061774428 for window 343
        Apr 13 00:58:59 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "Mail" for over 1.00 seconds. Server has re-enabled them.
        Apr 13 00:59:39 spindump: Error loading dyld shared cache uuid UUID: 0x8
        Apr 13 01:00:41 BDUpdDaemon: [com.bitdefender.upddaemon] reload('/var/tmp/Bitdefender/AvDaemon', 584): 60
        Apr 13 01:09:02 com.apple.kextd: Kext id com.apple.kernel.iokit not found; removing personalities from kernel.
        Apr 13 01:09:02 com.apple.kextd: String/URL conversion failure.
        Apr 13 01:09:08 fseventsd: event logs in /Volumes/Copia de Seguridad/.fseventsd out of sync with volume.  destroying old logs. (528 1 19163)
        Apr 13 01:09:09 fseventsd: log dir: /Volumes/Copia de Seguridad/.fseventsd getting new uuid: UUID
        Apr 13 01:09:09 fseventsd: event logs in /Volumes/JVT/.fseventsd out of sync with volume.  destroying old logs. (528 1 19164)
        Apr 13 01:09:10 fseventsd: log dir: /Volumes/JVT/.fseventsd getting new uuid: UUID
        Apr 13 01:09:27 WindowServer: MPServiceForDisplayDevice: Invalid device alias (0)
        Apr 13 01:09:35 WindowServer: MPServiceForDisplayDevice: Invalid device alias (0)
        Apr 13 01:17:20 WindowServer: _CGXRemoveWindowFromWindowMovementGroup: Window not in group
        Apr 13 01:17:40 WindowServer: _CGXRemoveWindowFromWindowMovementGroup: Window not in group
        Apr 13 01:22:21 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "App Store" for over 1.00 seconds. Server has re-enabled them.
        Apr 13 01:23:39 fseventsd: Logging disabled completely for device:1: /Volumes/Recovery HD
        Apr 13 01:28:20 fseventsd: Logging disabled completely for device:1: /Volumes/Recovery HD
        Apr 13 01:38:00 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "Mail" for over 1.00 seconds. Server has re-enabled them.
    launchd log
        Apr 12 22:20:06 com.apple.xpc.launchd.domain.pid.SecurityAgent.205: Path not allowed in target domain: type = uid, path = /System/Library/PrivateFrameworks/DataDetectorsCore.framework/Versions/A/XPCSer vices/DataDetectorsDynamicData.xpc/Contents/MacOS/DataDetectorsDynamicData error = 1: Operation not permitted, origin = /System/Library/Frameworks/Security.framework/Versions/A/XPCServices/SecurityAg ent.xpc
        Apr 12 22:20:06 com.apple.xpc.launchd.domain.pid.SecurityAgent.205: Path not allowed in target domain: type = uid, path = /System/Library/Frameworks/AppKit.framework/Versions/C/XPCServices/SandboxedSer viceRunner.xpc/Contents/MacOS/SandboxedServiceRunner error = 1: Operation not permitted, origin = /System/Library/Frameworks/Security.framework/Versions/A/XPCServices/SecurityAg ent.xpc
        Apr 12 22:20:06 com.apple.xpc.launchd.domain.pid.SecurityAgent.205: Path not allowed in target domain: type = uid, path = /System/Library/Frameworks/Security.framework/Versions/A/XPCServices/XPCTimeSta mpingService.xpc/Contents/MacOS/XPCTimeStampingService error = 1: Operation not permitted, origin = /System/Library/Frameworks/Security.framework/Versions/A/XPCServices/SecurityAg ent.xpc
        Apr 12 22:20:06 com.apple.xpc.launchd.domain.pid.SecurityAgent.205: Path not allowed in target domain: type = uid, path = /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Diction aryServices.framework/Versions/A/XPCServices/com.apple.DictionaryServiceHelper.x pc/Contents/MacOS/com.apple.DictionaryServiceHelper error = 1: Operation not permitted, origin = /System/Library/Frameworks/Security.framework/Versions/A/XPCServices/SecurityAg ent.xpc
        Apr 12 22:20:06 com.apple.xpc.launchd.domain.pid.SecurityAgent.205: Path not allowed in target domain: type = uid, path = /System/Library/Frameworks/Security.framework/Versions/A/XPCServices/XPCKeychai nSandboxCheck.xpc/Contents/MacOS/XPCKeychainSandboxCheck error = 1: Operation not permitted, origin = /System/Library/Frameworks/Security.framework/Versions/A/XPCServices/SecurityAg ent.xpc
        Apr 12 22:20:06 com.apple.xpc.launchd.domain.pid.SecurityAgent.205: Path not allowed in target domain: type = uid, path = /System/Library/Frameworks/IOKit.framework/Versions/A/XPCServices/IOServiceAuth orizeAgent.xpc/Contents/MacOS/IOServiceAuthorizeAgent error = 1: Operation not permitted, origin = /System/Library/Frameworks/Security.framework/Versions/A/XPCServices/SecurityAg ent.xpc
        Apr 12 22:20:06 com.apple.xpc.launchd.domain.pid.SecurityAgent.205: Path not allowed in target domain: type = uid, path = /System/Library/PrivateFrameworks/SpeechRecognitionCore.framework/Versions/A/XP CServices/com.apple.SpeechRecognitionCore.brokerd.xpc/Contents/MacOS/com.apple.S peechRecognitionCore.brokerd error = 1: Operation not permitted, origin = /System/Library/Frameworks/Security.framework/Versions/A/XPCServices/SecurityAg ent.xpc
        Apr 12 22:20:06 com.apple.xpc.launchd.domain.pid.SecurityAgent.205: Failed to bootstrap path: path = /System/Library/Frameworks/Security.framework/Versions/A/XPCServices/XPCTimeSta mpingService.xpc, error = 1: Operation not permitted
        Apr 12 22:20:06 com.apple.xpc.launchd.domain.pid.SecurityAgent.205: Failed to bootstrap path: path = /System/Library/PrivateFrameworks/DataDetectorsCore.framework/Versions/A/XPCSer vices/DataDetectorsDynamicData.xpc, error = 1: Operation not permitted
        Apr 12 22:20:06 com.apple.xpc.launchd.domain.pid.SecurityAgent.205: Failed to bootstrap path: path = /System/Library/PrivateFrameworks/SpeechRecognitionCore.framework/Versions/A/XP CServices/com.apple.SpeechRecognitionCore.brokerd.xpc, error = 1: Operation not permitted
        Apr 12 22:20:06 com.apple.xpc.launchd.domain.pid.SecurityAgent.205: Failed to bootstrap path: path = /System/Library/Frameworks/AppKit.framework/Versions/C/XPCServices/SandboxedSer viceRunner.xpc, error = 1: Operation not permitted
        Apr 12 22:20:06 com.apple.xpc.launchd.domain.pid.SecurityAgent.205: Failed to bootstrap path: path = /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Diction aryServices.framework/Versions/A/XPCServices/com.apple.DictionaryServiceHelper.x pc, error = 1: Operation not permitted
        Apr 12 22:20:06 com.apple.xpc.launchd.domain.pid.SecurityAgent.205: Failed to bootstrap path: path = /System/Library/Frameworks/IOKit.framework/Versions/A/XPCServices/IOServiceAuth orizeAgent.xpc, error = 1: Operation not permitted
        Apr 12 22:20:06 com.apple.xpc.launchd.domain.pid.SecurityAgent.205: Failed to bootstrap path: path = /System/Library/Frameworks/Security.framework/Versions/A/XPCServices/XPCKeychai nSandboxCheck.xpc, error = 1: Operation not permitted
        Apr 12 22:20:06 com.apple.xpc.launchd.domain.pid.SecurityAgent.205: Path not allowed in target domain: type = uid, path = /System/Library/Frameworks/AppKit.framework/Versions/C/XPCServices/SandboxedSer viceRunner.xpc/Contents/MacOS/SandboxedServiceRunner error = 1: Operation not permitted, origin = /System/Library/Frameworks/Security.framework/Versions/A/XPCServices/SecurityAg ent.xpc
        Apr 12 22:20:06 com.apple.xpc.launchd.domain.pid.SecurityAgent.205: Path not allowed in target domain: type = uid, path = /System/Library/PrivateFrameworks/SpeechRecognitionCore.framework/Versions/A/XP CServices/com.apple.SpeechRecognitionCore.brokerd.xpc/Contents/MacOS/com.apple.S peechRecognitionCore.brokerd error = 1: Operation not permitted, origin = /System/Library/Frameworks/Security.framework/Versions/A/XPCServices/SecurityAg ent.xpc
        Apr 12 22:20:06 com.apple.xpc.launchd.domain.pid.SecurityAgent.205: Path not allowed in target domain: type = uid, path = /System/Library/PrivateFrameworks/DataDetectorsCore.framework/Versions/A/XPCSer vices/DataDetectorsDynamicData.xpc/Contents/MacOS/DataDetectorsDynamicData error = 1: Operation not permitted, origin = /System/Library/Frameworks/Security.framework/Versions/A/XPCServices/SecurityAg ent.xpc
        Apr 12 22:20:06 com.apple.xpc.launchd.domain.pid.SecurityAgent.205: Path not allowed in target domain: type = uid, path = /System/Library/PrivateFrameworks/GeoServices.framework/Versions/A/XPCServices/ com.apple.geod.xpc/Contents/MacOS/com.apple.geod error = 1: Operation not permitted, origin = /System/Library/Frameworks/Security.framework/Versions/A/XPCServices/SecurityAg ent.xpc
        Apr 12 22:28:22 com.apple.xpc.launchd.user.501.100006.Aqua: Could not import service from caller: caller = otherbsd.214, service = com.apple.photostream-agent, error = 119: Service is disabled
        Apr 13 00:53:38 com.apple.xpc.launchd.user.501.100006.Aqua: Could not read path: path = /Library/LaunchAgents/com.bitdefender.antivirusformac.plist, error = 2: No such file or directory
        Apr 13 00:53:38 com.apple.xpc.launchd.user.501.100006.Aqua: Could not read path: path = /Library/LaunchAgents/com.bitdefender.EndpointSecurityforMac.plist, error = 2: No such file or directory
        Apr 13 00:53:39 com.apple.xpc.launchd.domain.system: Could not read path: path = /Library/LaunchDaemons/com.bitdefender.upgrade.plist, error = 2: No such file or directory
        Apr 13 00:53:39 com.apple.xpc.launchd.domain.system: Could not read path: path = /Library/LaunchDaemons/com.bitdefender.epag.plist, error = 2: No such file or directory
        Apr 13 00:53:39 com.apple.xpc.launchd.domain.system: Could not read path: path = /Library/LaunchDaemons/com.bitdefender.AuthHelperTool.plist, error = 2: No such file or directory
        Apr 13 00:53:41 com.apple.xpc.launchd.domain.system: Could not read path: path = /Library/LaunchDaemons/com.bitdefender.epag.plist, error = 2: No such file or directory
    Console log
        Apr 10 22:42:36 fontd: Failed to open read-only database, regenerating DB
        Apr 10 22:44:05 mbloginhelper: Property list invalid for format: 200 (property lists cannot contain NULL)
        Apr 12 22:28:23 fontd: Failed to open read-only database, regenerating DB
    Loaded kernel extensions
        com.Cycling74.driver.Soundflower (1.6.6)
        com.hzsystems.terminus.driver (4)
        net.kromtech.kext.Firewall (2.3.7)
    System services loaded
        com.adobe.fpsaud
        com.apple.Kerberos.kdc
        - status: 1
        com.apple.mtrecorder
        - status: 78
        com.apple.spirecorder
        - status: 78
        com.apple.watchdogd
        com.bitdefender.AuthHelperTool
        com.bitdefender.CoreIssues
        com.bitdefender.Daemon
        com.bitdefender.UpdDaemon
        com.bitdefender.upgrade
        com.bombich.ccc
        com.macpaw.CleanMyMac2.Agent
        com.microsoft.office.licensing.helper
        com.oracle.java.Helper-Tool
        com.oracle.java.JavaUpdateHelper
        com.zeobit.MacKeeper.AntiVirus
    System services disabled
        com.apple.mtmd
        com.apple.mrt
        com.apple.mtmfs
    Login services loaded
        com.adobe.CS5ServiceManager
        com.apple.mrt.uiagent
        com.bitdefender.antivirusformac
        com.divx.dms.agent
        com.divx.update.agent
        com.google.keystone.user.agent
        com.macpaw.CleanMyMac2Helper.diskSpaceWatcher
        com.macpaw.CleanMyMac2Helper.scheduledScan
        com.macpaw.CleanMyMac2Helper.trashWatcher
        com.oracle.java.Java-Updater
        com.wacom.wacomtablet
        com.zeobit.MacKeeper.Helper
    Login services disabled
        com.macpaw.CleanMyMac.volumeWatcher
        com.macpaw.CleanMyMac.trashSizeWatcher
        com.apple.photostream-agent
        com.macpaw.CleanMyMac.helperTool
        com.adobe.AAM.Scheduler-1.0
        com.spotify.webhelper
    User services disabled
        com.macpaw.CleanMyMac.volumeWatcher
        com.macpaw.CleanMyMac.trashSizeWatcher
        com.apple.photostream-agent
        com.macpaw.CleanMyMac.helperTool
        com.adobe.AAM.Scheduler-1.0
        com.spotify.webhelper
    Startup items
        /Library/StartupItems/MySQLCOM/MySQLCOM
        /Library/StartupItems/MySQLCOM/StartupParameters.plist
    User login items
        Mail
        - /Applications/Mail.app
        Dropbox
        - /Applications/Dropbox.app
    Safari extensions
        iMedia Converter Deluxe 
        - com.wondershare.iskyvc
        iTube Studio
        - com.wondershare.safari.itubestudio
    Firefox extensions
        Clear Console
        QBurst
    iCloud errors
        cloudd 51
        comapple.CloudPhotosConfiguration 27
        cloudphotosd 8
        storedownloadd 2
        accountsd 2
        Finder 2
        Spotlight 1
        Mail 1
        CallHistorySyncHelper 1
    Continuity errors
        sharingd 3
    Restricted files: 1610
    Lockfiles: 178
    High file counts
        Desktop: 61
    Contents of /Library/LaunchAgents/com.bitdefender.antivirusformac.plist
        - mod date: Feb 23 15:39:54 2015
        - size (B): 690
        - checksum: 2783812254
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.bitdefender.antivirusformac</string>
        <key>Nice</key>
        <integer>1</integer>
        <key>KeepAlive</key>
        <dict>
        <key>PathState</key>
        <dict>
        <key>/private/var/db/.AVXupgRunning</key>
        <false/>
        </dict>
        </dict>
        <key>Program</key>
        <string>/Library/Bitdefender/AVP/AntivirusforMac.app/Contents/MacOS/Antivirusfo rMac</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Bitdefender/AVP/AntivirusforMac.app/Contents/MacOS/Antivirusfo rMac</string>
        </array>
        </dict>
        </plist>
    Contents of /Library/LaunchAgents/com.divx.dms.agent.plist
        - mod date: Nov 17 09:11:48 2014
        - size (B): 426
        - checksum: 637650676
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.divx.dms.agent</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Application Support/DivX/DivXMediaServer.app/Contents/MacOS/DivXMediaServer</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        </dict>
        </plist>
    Contents of /Library/LaunchAgents/com.divx.update.agent.plist
        - mod date: May 19 23:24:29 2014
        - size (B): 498
        - checksum: 3867571547
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.divx.update.agent</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Application Support/DivX/DivXUpdate.app/Contents/MacOS/DivXUpdate</string>
        <string>/silent</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>StartInterval</key>
        <integer>10800</integer>
        </dict>
        </plist>
    Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist
        - mod date: Jan 15 14:05:43 2014
        - size (B): 104
        - checksum: 1039097793
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.oracle.java.Java-Updater</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
        <string>-bgcheck</string>
        </array>
        <key>StandardErrorPath</key>
        <string>/dev/null</string>
        <key>StandardOutPath</key>
        <string>/dev/null</string>
        <key>StartCalendarInterval</key>
        <dict>
        <key>Hour</key>
        <integer>50</integer>
        <key>Minute</key>
        <integer>52</integer>
        <key>Weekday</key>
        <integer>2</integer>
        </dict>
        </dict>
        ...and 1 more line(s)
    Contents of /Library/LaunchAgents/com.wacom.wacomtablet.plist
        - mod date: Oct 12 00:37:46 2013
        - size (B): 712
        - checksum: 2972905917
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>EnvironmentVariables</key>
        <dict>
        <key>RUN_WITH_LAUNCHD</key>
        <string>1</string>
        </dict>
        <key>KeepAlive</key>
        <dict>
        <key>SuccessfulExit</key>
        <true/>
        </dict>
        <key>Label</key>
        <string>com.wacom.wacomtablet</string>
        <key>LimitLoadToSessionType</key>
        <array>
        <string>Aqua</string>
        <string>LoginWindow</string>
        </array>
        <key>Program</key>
        <string>/Library/Application Support/Tablet/WacomTabletSpringboard</string>
        <key>RunAtLoad</key>
        <true/>
        ...and 4 more line(s)
    Contents of /Library/LaunchDaemons/com.bitdefender.AuthHelperTool.plist
        - mod date: Feb 23 15:39:55 2015
        - size (B): 801
        - checksum: 329828832
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.bitdefender.AuthHelperTool</string>
        <key>KeepAlive</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Bitdefender/AVP/common.bundle/AuthHelperTool</string>
        <string>/Library/Bitdefender/AVP/common.bundle/Common.plist</string>
        </array>
        <key>Sockets</key>
        <dict>
        <key>MasterSocket</key>
        <dict>
        <key>SockFamily</key>
        <string>Unix</string>
        <key>SockPathMode</key>
        <integer>438</integer>
        <key>SockPathName</key>
        <string>/var/run/com.bitdefender.AuthHelperTool</string>
        <key>SockType</key>
        <string>Stream</string>
        ...and 4 more line(s)
    Contents of /Library/LaunchDaemons/com.bitdefender.upgrade.plist
        - mod date: Feb 23 15:39:55 2015
        - size (B): 609
        - checksum: 972189573
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.bitdefender.upgrade</string>
        <key>Nice</key>
        <integer>1</integer>
        <key>KeepAlive</key>
        <dict>
        <key>SuccessfulExit</key>
        <false/>
        </dict>
        <key>Program</key>
        <string>/Library/Bitdefender/AVP/antivirus.bundle/BDUpgDaemon</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Bitdefender/AVP/antivirus.bundle/BDUpgDaemon</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        </dict>
        </plist>
    Contents of /Library/LaunchDaemons/com.bombich.ccc.plist
        - mod date: Nov 25 14:27:44 2012
        - size (B): 770
        - checksum: 3730953884
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Disabled</key>
        <false/>
        <key>Label</key>
        <string>com.bombich.ccc</string>
        <key>OnDemand</key>
        <true/>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/PrivilegedHelperTools/com.bombich.ccc</string>
        </array>
        <key>ServiceIPC</key>
        <true/>
        <key>Sockets</key>
        <dict>
        <key>MasterSocket</key>
        <dict>
        <key>SockFamily</key>
        <string>Unix</string>
        <key>SockPathMode</key>
        <integer>438</integer>
        <key>SockPathName</key>
        ...and 7 more line(s)
    Contents of /Library/LaunchDaemons/com.macpaw.CleanMyMac2.Agent.plist
        - mod date: Nov 13 14:21:09 2014
        - size (B): 801
        - checksum: 3775555851
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.macpaw.CleanMyMac2.Agent</string>
        <key>MachServices</key>
        <dict>
        <key>com.macpaw.CleanMyMac2.Agent</key>
        <true/>
        </dict>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/PrivilegedHelperTools/com.macpaw.CleanMyMac2.Agent</string>
        </array>
        <key>Sockets</key>
        <dict>
        <key>MasterSocket</key>
        <dict>
        <key>SockFamily</key>
        <string>Unix</string>
        <key>SockPathMode</key>
        <integer>438</integer>
        <key>SockPathName</key>
        <string>/var/run/com.macpaw.CleanMyMac2.Agent.socket</string>
        ...and 6 more line(s)
    Contents of /Library/LaunchDaemons/com.zeobit.MacKeeper.AntiVirus.plist
        - mod date: Nov 26 20:34:16 2012
        - size (B): 455
        - checksum: 4244331265
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
            <dict>
        <key>Disabled</key>
        <false/>
        <key>Label</key>
        <string>com.zeobit.MacKeeper.AntiVirus</string>
        <key>Program</key>
        <string>/Library/Application Support/MacKeeper/AntiVirus.app/Contents/MacOS/AntiVirus</string>
        <key>OnDemand</key>
        <false/>
        </dict>
        </plist>
    Contents of /private/etc/hosts
        - mod date: Nov 29 21:28:38 2012
        - size (B): 1194
        - checksum: 1440585190
        127.0.0.1 localhost
        255.255.255.255 broadcasthost
        ::1             localhost
        fe80::1%lo0 localhost
        127.0.0.1 activate.adobe.com
        127.0.0.1 practivate.adobe.com
        127.0.0.1 ereg.adobe.com
        127.0.0.1 activate.wip3.adobe.com
        127.0.0.1 wip3.adobe.com
        127.0.0.1 3dns-3.adobe.com
        127.0.0.1 3dns-2.adobe.com
        127.0.0.1 adobe-dns.adobe.com
        127.0.0.1 adobe-dns-2.adobe.com
        127.0.0.1 adobe-dns-3.adobe.com
        127.0.0.1 ereg.wip3.adobe.com
        127.0.0.1 activate-sea.adobe.com
        127.0.0.1 wwis-dubc1-vip60.adobe.com
        127.0.0.1 activate-sjc0.adobe.com
        127.0.0.1 hl2rcv.adobe.com
        127.0.0.1 activate.adobe.com
        127.0.0.1 practivate.adobe.com
        127.0.0.1 ereg.adobe.com
        127.0.0.1 activate.wip3.adobe.com
        127.0.0.1 wip3.adobe.com
        127.0.0.1 3dns-3.adobe.com
        ...and 9 more line(s)
    Contents of Library/LaunchAgents/com.google.keystone.agent.plist
        - mod date: Mar 17 00:58:04 2015
        - size (B): 805
        - checksum: 2902800363
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.google.keystone.user.agent</string>
        <key>LimitLoadToSessionType</key>
        <string>Aqua</string>
        <key>ProgramArguments</key>
        <array>
         <string>/Users/USER/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bu ndle/Contents/Resources/GoogleSoftwareUpdateAgent.app/Contents/MacOS/GoogleSoftw areUpdateAgent</string>
         <string>-runMode</string>
         <string>ifneeded</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>StartInterval</key>
        <integer>3523</integer>
        <key>StandardErrorPath</key>
        <string>/dev/null</string>
        <key>StandardOutPath</key>
        <string>/dev/null</string>
        </dict>
        </plist>
    Contents of Library/LaunchAgents/com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist
        - mod date: Apr 11 01:00:25 2015
        - size (B): 639
        - checksum: 2857823656
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.macpaw.CleanMyMac2Helper.diskSpaceWatcher</string>
        <key>ProgramArguments</key>
        <array>
        <string>/usr/bin/open</string>
        <string>-F</string>
        <string>-g</string>
        <string>/Users/USER/Library/Application Support/CleanMyMac 2/CleanMyMac 2 Helper.app</string>
        <string>--args</string>
        <string>-watchDiskSpace</string>
        </array>
        <key>RunAtLoad</key>
        <false/>
        <key>StartInterval</key>
        <integer>3600</integer>
        </dict>
        </plist>
    Contents of Library/LaunchAgents/com.macpaw.CleanMyMac2Helper.scheduledScan.plist
        - mod date: Apr 11 01:00:25 2015
        - size (B): 738
        - checksum: 766325059
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.macpaw.CleanMyMac2Helper.scheduledScan</string>
        <key>ProgramArguments</key>
        <array>
        <string>/usr/bin/open</string>
        <string>-F</string>
        <string>-g</string>
        <string>-n</string>
        <string>/Users/USER/Library/Application Support/CleanMyMac 2/CleanMyMac 2 Helper.app</string>
        <string>--args</string>
        <string>-scheduled</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>StartCalendarInterval</key>
        <dict>
        <key>Hour</key>
        <integer>13</integer>
        <key>Minute</key>
        <integer>25</integer>
        </dict>
        ...and 2 more line(s)
    Contents of Library/LaunchAgents/com.macpaw.CleanMyMac2Helper.trashWatcher.plist
        - mod date: Apr 11 01:00:25 2015
        - size (B): 664
        - checksum: 4001678413
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.macpaw.CleanMyMac2Helper.trashWatcher</string>
        <key>ProgramArguments</key>
        <array>
        <string>/usr/bin/open</string>
        <string>-F</string>
        <string>-g</string>
        <string>/Users/USER/Library/Application Support/CleanMyMac 2/CleanMyMac 2 Helper.app</string>
        <string>--args</string>
        <string>-watchTrash</string>
        </array>
        <key>RunAtLoad</key>
        <false/>
        <key>WatchPaths</key>
        <array>
        <string>/Users/USER/.Trash</string>
        </array>
        </dict>
        </plist>
    Contents of Library/LaunchAgents/com.zeobit.MacKeeper.Helper.plist
        - mod date: Mar 16 11:47:58 2015
        - size (B): 619
        - checksum: 1794757485
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Disabled</key>
        <false/>
        <key>EnvironmentVariables</key>
        <dict>
        <key>ZBTimeStamp</key>
        <string>20150305190134</string>
        </dict>
        <key>Label</key>
        <string>com.zeobit.MacKeeper.Helper</string>
        <key>LimitLoadToSessionType</key>
        <string>Aqua</string>
        <key>OnDemand</key>
        <false/>
        <key>Program</key>
        <string>/Applications/MacKeeper.app/Contents/Resources/MacKeeper Helper.app/Contents/MacOS/MacKeeper Helper</string>
        </dict>
        </plist>
    Bad plists
        /Library/Preferences/com.epson.Epson Customer Research Participation.UnInstallList.plist
        /Library/Preferences/com.epson.Epson Event Manager.UnInstallList.plist
        /Library/Preferences/com.epson.EPSON Scan.UnInstallList.plist
        /Library/Preferences/com.epson.Epson Scanner ICA Driver.UnInstallList.plist
        /Library/Preferences/com.epson.Inkjet Printer Driver.UnInstallList.plist
    Extensions
        /System/Library/Extensions/EMUUSBAudio.kext
        - com.emu.driver.EMUUSBAudio
        /System/Library/Extensions/JMicronATA.kext
        - com.jmicron.JMicronATA
        /System/Library/Extensions/MacVideAudioConnectorDriver.kext
        - com.macvide.driver.MacVideAudioConnectorDriver
        /System/Library/Extensions/RoxioBluRaySupport.kext
        - com.roxio.BluRaySupport
        /System/Library/Extensions/SiLabsUSBDriver.kext
        - com.silabs.driver.CP210xVCPDriver
        /System/Library/Extensions/SiLabsUSBDriver64.kext
        - com.silabs.driver.CP210xVCPDriver64
        /System/Library/Extensions/Soundflower.kext
        - com.Cycling74.driver.Soundflower
        /System/Library/Extensions/Terminus.kext
        - com.hzsystems.terminus.driver
        /System/Library/Extensions/Wacom Tablet.kext
        - com.wacom.kext.wacomtablet
    Applications
        /Applications/Adobe After Effects CS5/Adobe After Effects CS5.app
        - com.adobe.AfterEffects
        /Applications/Adobe After Effects CS5/Adobe After Effects Render Engine.app
        - N/A
        /Applications/Adobe Fireworks CS5/Configuration/Mac/Shared/AdobeAIR/SDK/runtimes/air/mac/Adobe AIR.framework/Versions/1.0/Resources/Template.app
        - com.adobe.air.NativeTemplate
        /Applications/Adobe Flash CS5/AIK2.0/lib/nai/lib/naib.app
        - APP_ID
        /Applications/Adobe Flash CS5/AIK2.0/runtimes/air/mac/Adobe AIR.framework/Resources/Template.app
        - com.adobe.air.NativeTemplate
        /Applications/Adobe Flash CS5/AIK2.0/runtimes/air/mac/Adobe AIR.framework/Versions/1.0/Resources/Template.app
        - com.adobe.air.NativeTemplate
        /Applications/Adobe Flash CS5/AIK2.0/runtimes/air/mac/Adobe AIR.framework/Versions/Current/Resources/Template.app
        - com.adobe.air.NativeTemplate
        /Applications/Adobe Media Encoder CS5/PCI/AMEPCI/resources/uninstall/Uninstall Product.app
        - com.Adobe.Uninstall Product
        /Applications/Adobe Media Encoder CS5/PCI/Dolby/resources/uninstall/Uninstall Product.app
        - com.Adobe.Uninstall Product
        /Applications/Adobe Media Player.app
        - com.adobe.amp.UUID.1
        /Applications/Adobe/Adobe Help.app
        - chc.UUID.1
        /Applications/Audacity/Audacity.app
        - net.sourceforge.audacity
        /Applications/AudioXplorer.app
        - ch.curvuspro.audioxplorer
        /Applications/BitTorrent.app
        - com.bittorrent.BitTorrent
        /Applications/Creative Professional/E-MU USB Audio/E-MU USB Audio Control Panel.app
        - com.creative-professional.E-MU USB Audio Control Panel
        /Applications/Creative Professional/E-MU USB Audio/E-MU USB Audio Uninstaller.app
        - com.emu.Uninstaller
        /Applications/DivX/DivX Preferences.app
        - com.divx.divxprefs
        /Applications/DivX/Uninstall DivX for Mac.app
        - com.divxinc.uninstalldivxformac
        /Applications/Epson Software/EPSON Scan Settings.app
        - com.epson.scan.settingutility
        /Applications/Epson Software/EPSON Scan.app
        - com.epson.scan.standalone
        /Applications/Epson Software/Event Manager.app
        - com.epson.ProjectManager
        /Applications/Google SketchUp 8/SketchUp.app
        - com.google.sketchupfree8
        /Applications/Img2icns.app
        - net.shinyfrog.img2icns
        /Applications/Lucien.app
        - N/A
        /Applications/MacScan 2/MacScan Scheduler.app
        - com.securemac.MacScan Scheduler
        /Applications/MacScan 2/MacScan.app
        - com.securemac.MacScan
        /Applications/Microsoft Communicator.app
        - com.microsoft.Communicator
        /Applications/Microsoft Messenger.app
        - com.microsoft.Messenger
        /Applications/Microsoft Office 2011/Microsoft Document Connection.app:́n de documentos de Microsoft:
        - N/A
        /Applications/Microsoft Office 2011/Microsoft Excel.app
        - com.microsoft.Excel
        /Applications/Microsoft Office 2011/Microsoft Outlook.app
        - com.microsoft.Outlook
        /Applications/Microsoft Office 2011/Microsoft PowerPoint.app
        - com.microsoft.Powerpoint
        /Applications/Microsoft Office 2011/Microsoft Word.app
        - com.microsoft.Word
        /Applications/Microsoft Office 2011/Office/Alerts Daemon.app
        - com.microsoft.AlertsDaemon
        /Applications/Microsoft Office 2011/Office/Equation Editor.app
        - com.microsoft.EquationEditor
        /Applications/Microsoft Office 2011/Office/Microsoft Chart Converter.app
        - com.microsoft.openxml.chart.app
        /Applications/Microsoft Office 2011/Office/Microsoft Clip Gallery.app:́a de imágenes de Microsoft:
        - N/A
        /Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app
        - com.microsoft.outlook.database_daemon
        /Applications/Microsoft Office 2011/Office/Microsoft Database Utility.app
        - com.microsoft.outlook.database_utility
        /Applications/Microsoft Office 2011/Office/Microsoft Graph.app
        - com.microsoft.Graph
        /Applications/Microsoft Office 2011/Office/Microsoft Office Reminders.app
        - com.microsoft.outlook.office_reminders
        /Applications/Microsoft Office 2011/Office/Microsoft Office Setup Assistant.app:́n de Microsoft Office:
        - N/A
        /Applications/Microsoft Office 2011/Office/Microsoft Query
        - N/A
        /Applications/Microsoft Office 2011/Office/Microsoft Upload Center.app
        - com.microsoft.office.uploadcenter
        /Applications/Microsoft Office 2011/Office/My Day.app
        - com.microsoft.myday
        /Applications/Microsoft Office 2011/Office/Open XML for Excel.app
        - com.microsoft.openxml.excel.app
        /Applications/Microsoft Office 2011/Office/SyncServicesAgent.app
        - com.microsoft.SyncServicesAgent
        /Applications/Pure Analyzer System.app
        - com.gaelyvan.flux.pureanalysersystem
        /Applications/Remote Desktop Connection.app:́n a Escritorio remoto:
        - N/A
        /Applications/Sample Manager.app
        - com.audiofile.SampleManager
        /Applications/Smaart.app
        - Rational Acoustics
        /Applications/Soundflower/Soundflowerbed.app
        - com.cycling74.Soundflowerbed
        /Applications/StellarPhoenix.app
        - com.StellarInformationSystemLtd..StellarPhoenix
        /Applications/StuffIt 12/DropStuff.app
        - com.stuffit.DropStuff
        /Applications/StuffIt 12/MagicMenu.app
        - com.stuffit

Maybe you are looking for

  • Can't find Audible Audiobook on Iphone 4s

    Hey everyone, First post here, so hopefully I get this right.  I've searched around and can't find anyone with a problem similar to mine. So I downloaded a book from audible.  And when I put the book on my iphone, i went to the audiobooks section to

  • How can I wipe purchases from my icloud

    My purchases on my iCloud account span several years and the list is large, several items were files for my nieces used on their iPads, and iPods which were under my user info that have outgrown their use. Is there a way I can actually delete the fil

  • Where is the SQL Developer download for Linux

    Can some one help provide a URL link to download the SQL Developer for Linux? The official link on the Oracle Website is pointing the Windows zip instead. Many thanks!

  • Calling a screen without bdc

    Hi,     I m entering sales order no and language in the selection screen.if header text doesn't exists in that language for that given sales order.then i want to goto that screen where I can create header text for taht given language. i don't want to

  • Airdrop is not on my favorites. What do i do?

    I have a 2012 MBP Retina 15 in. Recently, I wanted to use airdrop to easily transfer things from my iphone 5s to my MBP, but i realized that my airdrop is not on my favorites in finder. What can i do to put airdrop on my favorites in my finder? I am