PXE E53 error, and windows 7 start up problem error

recently, i have been getting an error called PXE E53 - no boot filename recieved. is the problem the hard drive? sometimes i get "windows 7 has failed to start. a recent hardware or software change might be the cause" and i choose start up repair, but then its just a black screen. any ideas of the problems im having?

Hi
This error comes if the OS or any boot device is not found in network boot, where the system tries to boot from Network or Boot Rom. Seems that teh BIOS setting is lost. To resolve teh issue. Enter BIOS by pressing F10 or F1 and reach the Boot tab (on the top with right arrow key). In the Boot tab there should be an option related to boot device priority, Select First Boot as HDD and then save settigs by pressing F10, select Yes for confirmation.
Now PC PC will reboot and hope the windows will boot.
Checkurtech
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

Similar Messages

Both xp and windows 7 have video problems with my VGA connection using TV

both xp and windows 7 have video problems with my VGA connection using TV as my monitor when it gets to starting up windows no matter what version it will not I have let my mac on all night and still says starting windows or the windows 7 logo and nothing else will happen also when I use a 3rd patty software like peraills or other it works like a charm how to fix it?

To map the drive on your computer click on Start - RUN - type "\\192.168.1.1" and click ok... When prompted for Username and Password type "admin" and click ok... Now you will be able to see the folder which you have shared on your router, right click on it and select "Map network drive" and click on finish.
Now it will map the drive on your computer and you should be able to transfer the file from your computer to the USB drive.

Upgraded to 10.8.3 and now having start up problems on MacBook Pro. Help?

Upgraded to 10.8.3 and now having start up problems on MacBook Pro. Help?

Please elaborate. What do you mean by "start up problems" ? How far does it get?
Chime? Fans? gray screen? Dark Apple? spinner? spinner spins for usual amount of time and screen goes dark? question mark? tones? flashing power light? smoke? what?

Work Resources and Windows 8 Start Menu

Is there any way to get the Work Resources folder content to automatically Pin to the Start Menu.

Hi,
I'm afraid there is no way to pin or map the content to Windows 8 Start Screen or desktop. Only two methods are allowed to access the RemoteApp, Desktop Connection and Web Access.
Niki Han
TechNet Community Support

Office 2013 and Windows 7 Starter Edition

Can you tell me if Office 2013 purchase via a HUP licence will work on a minibook with Windows 7 Starter Edition installed?

Hi,
Office 2013 is supported on Windows 7 Starter Edition, for more information about the System requirements for Office 2013, please refer to this article below:
http://technet.microsoft.com/en-us/library/ee624351(v=office.15).aspx
Regards,
Melon Chen
TechNet Community Support

Photoshop CC2014 and Windows 8 - click "drag" problem

Hey there!
So, I have recently started using the latest version of Photoshop CC2014 under windows 8.1 and I'm having this weird problem.
I'm using a Cintiq 24HD touch with latest drivers, and touch disabled. I have also disable any kind of click and hold windows has - for tablets and for touch input.
Cursor Drag problem in Photoshop CC2014 - YouTube
Still, when I try to make fine adjustments on sliders, I click and the slider simply does not move. This does not happen every click, but it happens often enough to be annoying as hell. It is happening everywhere, from panels to liquify window, to using the hand tool to navigate the image, and not only in sliders! Trying to make fine adjustments in liquify with your brushstroke jumping around is not fun.
I'm not sure what and where the problem is, but this simply does not happen in any other application (Photoshop CC; Sketchbook Pro, Paintstorm Studio, Krita).
Does anyone have any idea?
Thanks in advance,

I have been using Photoshop on windows for more then 20 years on windows. Windows 95, Windows 2000, Windows XP and Windows 7. I never installed Windows ME, Windows Vista or Windows 8. I have never seen any version of Photoshop change a displays brightness or even the image color when scaling or going from float to tab to single image with PS UI to full screen. However I hardly ever use Photoshop in full screen mode.
At different zoom views image may seem like the color change because of the scale of the image or the portion of the image that is on screen or the color of the border around the image.

Windows Vista start-up problem

Please help!!! I have hp pavilion p6152f with vista 64-bit. I used windows 7 upgrade program to upgrade to windows 7. After several OS freezing i decided to recover to Vista using hard drive partition. So i did it but vista never started. I am unable to run it. I haven't any access to safe mode. It redirects me to startup repair but it is unable to repair computer automatically ant it give me that:
Problem Event Name: StartupRepairV2
Problem Signature 01: AutoFailover
Problem Signature 02: 6.0.6001.18000.6.0.6001.18000
Problem Signature 03: 5
Problem Signature 04: 196611
Problem Signature 05: CorruptRegistry
Problem Signature 06: CorruptRegistry
Problem Signature 07: 2
Problem Signature 08: 3
Problem Signature 09: RollbackRegistry
Problem Signature 10: 0
OS Version: 6.0.6001.2.1.0.256.1
locale ID: 1033
so please help

Hi,
This process will allow you to make a Vista Repair Disc. This is not an installation disc but will allow you to use the Vista Recovery Console that is available on retail versions of Vista.
Download the file on the link below.
Vista 64 bit
This is a zipped file. If you don't have an extraction utility installed, download and install 7-Zip which can be used to open this file. Simply right click the zipped file, select 7-Zip, select Extract Files and then click Ok. You should now see another folder containing the ISO file.
You will need software to burn the ISO to a CD. If you don't have this type on software installed, download and install ImgBurn and use this to burn the ISO to a CD.
Once you have created the Vista Repair Disc, follow the guide on the link below to see if this will repair your installation. If the initial startup repair doesn't work, try running windows System Restore from the Advanced Options as this may correct the registry corruption.
http://www.bleepingcomputer.com/tutorials/tutorial148.html#
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

ASA 5510 and Windows Vista/7 VPN problems

Hi, I'm a programmer that's had to take over the sysadmin position (thank you economy) and our boss can't get access to the VPN with his new Windows 7 laptop. I've been banging my head trying to figure this out but I can't.
I think it gets past the phase 1 stuff, because windows stops the connection process when it hits "Authenticating username/password."
It works on our old XP systems and on OSX. It just doesn't seem to work on Windows 7.
Can anybody help? What do I have to add or change to get it to work?
Thanks so much in advance!
ciscoasa# sh run crypto
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set TRANS_ESP_3DES_SHA mode transport
crypto ipsec ikev1 transform-set TRANS_ESP_3DES_MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set TRANS_ESP_3DES_MD5 mode transport
crypto ipsec ikev1 transform-set TRANS_ESP_AES128_SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set TRANS_ESP_AES128_SHA mode transport
crypto ipsec ikev1 transform-set TRANS_ESP_AES256_SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set TRANS_ESP_AES256_SHA mode transport
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 1 set ikev1 transform-set TRANS_ESP_AES128_SHA TRANS_ESP_AES256_SHA TRANS_ESP_3DES_SHA
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set TRANS_ESP_3DES_MD5 TRANS_ESP_AES128_SHA TRANS_ESP_AES256_SHA ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5
crypto map outside_map 1 match address outside_cryptomap
crypto map outside_map 1 set pfs group5
crypto map outside_map 1 set peer 11.22.33.44
crypto map outside_map 1 set ikev1 transform-set ESP-AES-192-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ikev1 enable outside
crypto ikev1 policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 30
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 65535
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
ciscoasa# sh run tunnel-group
tunnel-group DefaultRAGroup general-attributes
address-pool l2tp_iprange
default-group-policy DefaultRAGroup
tunnel-group DefaultRAGroup ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group 11.22.33.44 type ipsec-l2l
tunnel-group 11.22.33.44 ipsec-attributes
ikev1 pre-shared-key *****

> What can we do?
Let your Cisco rep know that this is an important feature. The word I have is that stateful firewall is not in the Vista feature set for Cisco.
The readme for the Cisco VPN client 5.0 bears this out:
Known Issues:
CSCsh02887 Vista: Stateful firewall does not start.
CSCse44616 Vista: VPN Client should not install Zone Lab Firewall on Vista platform
CSCsf07334 Vista: Stateful Firewall Not Supported on Vista VPN Client

Windows 7 Starter share problems

I have a simple home network, has MYW7 (Starter), MYVISTA, MYXP and MYSAMBA(Linux) systems. No domain controller. I did the LmCompatibilityLevel registry hack to make Samba work.
Same user/pswd accounts on all systems.
MYW7 firewall is a 'Home' network.
MYVISTA, MYXP, MYSAMBA all can see each others shared disks, C, D, E(dvd), I've shared everything.
MYW7 can see drive C, D, E(DVD) on MYVISTA, C and D on MYXP, and all files on MYSAMBA. That works fine.
When I try to access anything from MYXP or MYVISTA to MYW7, I get a user/pswd request but there's nothing that I can type to satisfy it. When I type a valid user/pswd, it comes back with 'unable to log in' and suggests a user name of 'MYVISTA\mylogin' instead
of what I typed which was 'mylogin'.
I've turned on:
File and printer sharing
turn on sharing so anyone with network access can read and write files in the Public folders
Enable file sharing for devices that use 40- or 56-bit encryptino
password protected sharing
allow Windows to manage homegroup connections
I'd like to be able to see MYW7 files from MYXP and MYVISTA, and I'd like to be able to look at drive D from MYW7 to MYVISTA.
Also, when browsing the network using Windows Explorer, I often cannot see *some* systems, but I can get to them by doing a search for \\MYXP. This has been an ongoing problem. Is there some way I can cause the network browser to refresh the display and
find the missing nodes so it can display them in the tree of available nodes?
Thanks!

Please try the following steps in your Windows 7:
1. Launch regedit from Start Search box.
2. Find the following branch.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
3. Create a DWORD key under Lsa and set:
Name: LmCompatibilityLevel
Value: 1
4. Restart.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Acrobat 8 and Windows 8.1 Registration Problems

I have installed on a Windows 8.1 operating system an Adobe Acrobat 8 Professional Product. The user is not administrator on his computer. Each time the program opens he has the error for Registration Unsuccessful. The product is activated properly. Does Windows 8.1 has compatibility issues with Adobe Acrobat 8 Professional or i have to do the registration with administrator profile and then the user works properly with his account?
Thanks in advance

Hi g.argridiotis,
Acrobat 8 has never been tested on windows 8.
I would suggest to upgrade to the latest version of Acrobat, which has lot more features and is fully tested with windows 8.
~Ajlan Huda.

Iconia 700P and Windows 10 Technical Preview Problems

I've had mixed success installing the Windows 10 Technical Preview (64-bit) on my Iconia 700P. The first few iterations worked fairly well, but around build 9943, things went terribly wrong, and the machine would not boot. After a while (and a few peripheral purchases), I managed to restore Windows 8.1 from an Acronis recovery image. I downloaded the most recent "stable" build (10030, I think) before I signed up to reserve a copy of Windows 10. It installed fine from a DVD, but things went really downhill once we got to the settings portion of the installation. After rebooting a couple times during the process, the touch screen would not work at all (nor would the bluetooth keyboard). A USB mouse allowed me to click on the screen, but the tablet shut down every time I clicked on Continue. Has anyone had success installing the WIndows 10 Technical Preview on an Iconia 700P? I searched the forum, but couldn't find anything with the Iconia 700/WIndows 10 combination. Thanks!

I have an acer w700 now running windows 10 pro, (upgraded from 8.1 pro). The only issue i found was that after upgrading, i would get the following error on booting the system; "Unhandled exception has occurred in your application. If you click Continue, the application will ignore this error and attempt to continue. If you click Quit, the application will close immediately.
The wait operation timed out. (Exception from HRESULT: 0x80070102)." I too thought that this was a Net Framework 3.5 problem, but in fact, it is an Acer problem.................. i found a solution to resolve this; Go into your Task Scheduler (by using Windows search). The Task Scheduler runs applications according to a schedule. The MEMS application is crashing Windows 10 (since it is doing Windows 7 related things). In the Task Scheduler Manager, go to the Task Scheduler Library and find MEMS_Schedule. Right click on that line and left click on Disable. Now restart your computer. This is an Acer issue, and until Acer issues an update, the MEMS_Schedule needs to be kept disabled. If Acer ever gets around to issuing an update for this, then you can re-enable the MEMS_Sschedule, the same way as diasabling it. Other than this annoying issue, the W700 runs very well under Windows 10...........so far.............

Veriface 3 and windows 7 rc login problem

I have u110 notebook, Veriface 3 doesnt work on the windows 7 login screen... its shows veriface login window and trying to connect a webcam then its shows only black screen in the veriface login window... But when i login manually then veriface application working good...
How can i resolve this problem?

When i selected "super energy sever mode" from the power options, veriface works on the login screen.... but when i selected other power options, veriface doesnt work.
Message Edited by raid on 06-21-2009 12:52 PM

Idea Centre A600 Window 7 start up problem

I am using A600 all-in-one desktop.
Recently when i switch on my computer, after loading the lenovo screen, the machine automatically switch off by itself.
I don't know what is wrong about my computer
Is the programme in my computer causing the issue?

Try to start in safety mode, if it still doesn't start your pc could be faulty.
You can try to start from windows disc to fix os problems.

Windows Mobile 6.1 and Windows Media Player URL Problem

Is anyone having a problem playing videos or music by URL (Menu/Library/Menu/Open URL)?
I am trying to open an audio only HTTP URL at port 8080. If I use the IP based URL (example: http://xxx.xxx.xxx.xxx:8080), I get a "Cannot Find the File" error message. If I use a DNS based URL (example: http://abc.xyz.com:8080), I get a "The parameter is Incorrect" error message. Both URLs are verified to work on XP desktops on both DSL & cable modem networks.
The Treo Pro network here is 850MHz CDMA formerly Alltel, now Verizon. The Treo Pro is an original owner Alltel branded handset.
Post relates to: Treo Pro T850 (Alltel)

930383 wrote:
i cant run it. I need help, this issue is realy important for me.And what kind of help do you expect when your problem is hardly Java related?
The only thing I can think of is that the software does not match the CPU architecture that is used in the phone.

I updated to ios 6 and afterwards I started having problems.

My 4th gen ipod touch is skipping and pausing music randomly and is not allowing me to purchase apps directly from the app store. I can, however, purchase apps via itunes on the computer and download to my ipod. I have yet to purchase music directly from my ipod, but I assume it won't work, based on previous experiences.

I've had same problem and fix it visiting this page then click on Manage your Apple ID button. Follow the instructions in order to have your email address verified. After that my iPhone 4S updated do iOS 6 works fine with iCloud.

PXE E53 error, and windows 7 start up problem error

Similar Messages

Maybe you are looking for