PXEover IPV4 have new hard drive and still doing it

Help
I have the HP all in one pavilion 23, It s tarted having problems and I received the PXE over IPv4 message. THe computer was under warranty so HP sent someone out to install anew hard drive. WIthin a month I started getting the same
message, and of course the computer is now out of warranty. I am not savy
enough to have reset any thing. WHat do I do now?

Hello @lostinpc,
I just sent you a private message. If you are not sure how to check your forum messages, this post has instructions.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Similar Messages

Brand new hard drive and still can't get past the gray screen

i was having problems with my mac last night going to the gray screen, sometimes i'd get the folder with the question mark. i looked up for solutions and i tried every one i could find short of reformatting the hard drive. nothing worked, getting the start-up disk causes the mac to freeze on the screen with the picture of a disk and an arrow after i press the arrow to go into disk utilities. i took it to the apple store, which i wasn't really happy with my service there- i was called up immediately but then was never able to explain what was happening to the guy he just plugged in the computer, went back to helping someone else and periodically looked at my screen. i understand that they probably take care of multiple people at once so they don't get complaints about wait times, but i don't think i was really helped at all, he just ended up saying that i needed a new hard drive and if i knew how to put one in i was better off doing it myself then sent me on my way. well i bought a new hard drive and upon installing it and putting in the mac os x disk it still freezes and no solution has worked yet.

So all you need then is to know how to format the drive and install Snow Leopard.
How to erase and install Snow Leopard 10.6
https://support.apple.com/kb/HT3910

New hard drive, mac still does not work

Mac stopped working so took it to a mac store and they said its most likely the hard drive. Sent the hard drive back because it was still under warranty and they sent me a new one.
Installed new hard drive in the computer and when I turn it on I cant find the HD anywhere so that I can format it. The install disc is the only thing that shows up and when it asks where I want to have the disc installed there is nothing for me to click because the HD is not there.
Am I missing something or is the HD not the issue? Thanks

Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. Upon completion quit DU and return to the installer. Complete installing Snow Leopard.

I just need to know how you get an iTunes library off the original hard drive of a mac and onto an external hard drive and still have it work normally?

I just need to know how you get an iTunes library off the original hard drive of an imac and onto an external hard drive and still have it work as it normally would?

http://support.apple.com/kb/HT1449

I sent my 17inch mac pro to apple to install a new hard drive and my mountain lion was not on it when i got it back, using the same apple id i tried to re download it but it says i have to pay

i sent my 17inch mac pro to apple to install a new hard drive and my mountain lion was not on it when i got it back, using the same apple id i tried to re download it but it says i have to pay

never mind i got it by going into my account and veiwing hidden items and there it was

I have a pc running vista and the hard drive crashed how can i transfer my songs from Ipod nano 5th gen to my new hard drive and into itunes

I have a pc running vista and the hard drive crashed how can i transfer my songs from Ipod nano 5th gen to my new hard drive and into itunes

Right click on your device in the device list and choose "transfer purchses" to copy all music bought in iTunes to your new iTunes library.
For all other media you'll have to use 3rd party software, examples are mentioned in this thread:
http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0

New hard drive and have a question about photo stream.

My hard drive recently crashed. I have a new hard drive and am trying to organize my iphoto again. There are 1,000 photos on my iphone (photo stream) how do I get these onto my mac? My mac only has the last 30 days. Do I have to save each individual photos to the camera roll?

G9daniel wrote:
Is there a way to get user settings returned to what they were before?
Not unless you have a Time Machine backup of your system.
If you kdo you can just boot from the SL install disc and use that yo restore your system to the new HDD.

I have nearly 9,000 Images on my I Mac and I wish to move them over to a 2TB external hard drive and still be able to access them from Aperture and or iPhoto?

I have nearly 9,000 Images on my I Mac and I wish to move them over to a 2TB external hard drive and still be able to access them from Aperture and or iPhoto. How is the best way of doing this?

Here is how to do it with iPhoto:
http://support.apple.com/kb/PH2506
As for Aperture, you'll need to do a search on the support website yourself because the result is a download so I couldn't post a link - the instructions are in the user manual. I believe the settings are within Aperture's Preferences.

Can I delete a song from mu PC hard drive and still have it in the icloud?

Can I delete a song from my PC hard drive and still have it in the icloud?

Of course. This will only work if you are using iTunes Match or with the songs you purchased in the iTunes Store, because with iTunes 11, you can listen to them without having them saved on your Mac or PC

Can I keep photos on external hard drive and still use iPhoto?

I have virtually no space left on my eMac's 80GB hard drive. For a long time, I have kept my sizable iTunes library on an external hard drive connected to the eMac. It takes a bit of extra time to open up the iTunes library and to upload music from newly purchased CDs, but generally the external hard drive and eMac perform well together. My question is: Can I do the same with my photos (put them on the external hard drive) and still use iPhoto to access them and edit them? I have checked some of the Apple knowledge base documents, and there seem to be warnings against this. I am currently using iPhoto 6.0.6. I have purchased iPhoto 7.0 (with iLife '08) but haven't put the new software on the computer because there is not enough space. I would like to straighten out this space problem and get the benefits of the new software. (I have backed up quite a few of the photos onto CDs, but I like to have them handy--therefore on the eMac or on a hard drive connected to the eMac.) Thanks ahead to anyone with some good ideas on this topic.

winesmile
Yes it is, but you cannot access the at the same time as iPhoto can only open one library at a time.
So, a solution might be to have the entire library on the external, and to carry the smaller subset on the laptop.
To do this, follow the instructions above to move the library, but instead of deleting the library on the laptop (in the final step), put the pics from the earlier years into the iPhoto trash and empty it. (iPhoto Menu -> Empty Trash. Hint: Don't so them all at one go! Better a few a a time.)
Now you have the full library on the external (and if you want to access the full library, use that) and the 07 & 08 years on your laptop.
To switch between libraries, simply hold down the option (or alt) key when launching.
As you add photos to the Library you can use iPhoto Library Manager to move pics and albums /events between libraries, and so keep them up-to-date with each other.
Please note this is the only way to sync the libraries, there is no app that can do this automatically.
Regards
TD

IPhoto events and pictures missing from iPhoto after restoring new hard drive and upgrade to iLife11

My iPhoto events and pictures are ALL missing from my iPhoto Library after I tried restoring my programs on a new hard drive AND upgrading to iLife11! Over the last few months, I upgraded my 2008 Macbook Pro's hard drive from a 250 GB to a 500 GB hard drive and since then have been manually installing and restoring programs and software. I decided to do things manually because I had problems with doing Time Machine backups/restores in the past, so before I upgraded the drive, I manually saved everything to a Western Digital MyStudio 1 TB hard drive that I had just for the purposes of a second back up. Anyway, I tried importing the pictures onto the new library, but couldn't find the hard copies at first, so that didn't work. I then tried deleting the iPhoto Library that came with new operating system, then copying my old backup onto the new hard drive...that didn't work either. However, when I right clicked on the iPhoto Library icon on my external hard drive (the original) and clicked on "show package contents," the folder not only contained the originals, but they were still organized by year and event just as I had them originally!
So, then I thought "why don't I try just importing the pictures directly into the new iPhoto Library!"
I tested it out, and sure enough, it worked! I then tried importing an entire folder (which, was actually the name of the event), and again it worked! So, I literally clicked and dragged my entire 2007-2009 library of pictures (which was about 35 GB) back into my iPhoto Library! AND, this only took about 30 minutes to download, enough time for me to write this post and the following instructions to Recap:
          1. Open your new iPhoto Library
          2. Go to wherever your ORIGINAL iPhoto Library is saved/backed up, then Right-click (or Control click) on the iPhoto icon
          3. Click on "Show Package Contents"
          4. Go to the folder called "Originals" or "Master"
          5. Click and drag everything INSIDE the folder (not the folder itself) to your new iPhoto Library
          6. DO NOT try Importing from inside iPhoto! For some reaseon, iPhoto can't see these images, but I promise, they're there!
I assume this could work on other iLife programs, but luckily I have MobileMe and my iCalendar updated itself, though I did have to do some tweeking...
Hope this helps other people out, GOOD LUCK!

I'm re-posting the answer to this problem so I can show it has been answered:
Open your new iPhoto Library
Go to wherever your ORIGINAL iPhoto Library is saved/backed up, then Right-click (or Control click) on the iPhoto icon
Click on "Show Package Contents"
Go to the folder called "Originals" or "Master"
Click and drag everything INSIDE the folder (not the folder itself) to your new iPhoto Library
DO NOT try Importing from inside iPhoto! For some reason, iPhoto can't see these images, but I promise, they're there!
          GOOD LUCK!!!

Re: My Macbook 2009 model was recently upgraded with a new hard drive and upgraded to Mountain Lion OS. I am battling to retrieve all my photos that were ''saved'' in iCloud. Can someone help?

Re: My Macbook 2009 model was recently upgraded with a new hard drive and upgraded to Mountain Lion OS. I am battling to retrieve all my photos that were ''saved'' in iCloud. Can someone help?

If you are trying to recover photo stream photos, they are only held in iCloud for 30 days. All you would be able ro recover is photo stream photos from the last 30 days.
If you have an iOS device that still has the photo stream photos one it, you can save them to the camera roll by opening the my photo stream album, tapping Edit, tap the photos, tap Share, tap Save to Camera Roll. Once in the camera roll, they can be imported to iPhoto on your Mac as explained here: http://support.apple.com/kb/HT4083.

Windows 7 won't load after installing new Hard Drive and Recovery software

HP G72 Notebook PC
xz218UAR
I guess a virus crashed my hard drive so I bought a new one. I installed the new drive and loaded the recovery disks that I also bought from HP. Apparently Windows didn't load properly and it keeps telling me to RELOAD WINDOWS. I've tried starting over from Disk 1 but it's not doing anything different to fix it.
I removed the new hard drive and reinstalled it but it's still doing the same thing.
What am I doing wrong and HOW DO I FIX IT?

Hi,
Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
Assuming that this is just a problem with the Recovery process, there is a straight forward work around if you have ( or can borrow ) a retail Windows 7 installation disc that is exactly the same version as your OEM installation - ie if your notebook came with Windows 7 Home Premium 64bit this is the exact retail version you would need.
If you don't have access to a retail disc, you can create an installation disc yourself using another PC - just download the correct Disc Image from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here. These Images are clean and from a well-respected source, however there are only limited versions available.
Windows-7 sp1-iso-official-32-bit-and-64-bit
Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional drivers you may need can be found Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Installed new hard drive and windows 7 at the same time. Left old hard drives in computer but unable to get bookmarks from old drives to new.

Installed new hard drive and windows 7 at the same time. Left old hard drives in computer, installed firefox however I have no idea in which file the old bookmarks are located. I still have the old files for firefox in the old drives.

Your "Firefox personal data", like bookmarks, are stored in your Profile folder in Firefox. See this support article about how to recover that data from that old hard drive and transfer it your your new Profile.
http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile

My old hard drive crashed. How do you reload CS2 on new hard drive and get it activated?

My old hard drive crashed. How do you reload CS2 on new hard drive and get it activated?

You'll need to get onto Support and explain, and if you have not made a habbit of asking, they'll reset your activations limit back to zero. Or if you have only ever installed it once, you'll still have an activation to use.
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

PXEover IPV4 have new hard drive and still doing it

Similar Messages

Maybe you are looking for