PXI-1006 system crahes-Blue Screen

Problem: System Crash - Blue Screen - PXI 1006
I am using NI IPX-1006. Environment: Win NT 4.0 with CVI 5.5.
Problems
1. Everytime the system crashes the .Prj file is lost from the project folder.
2. This time nipalk.sys and nibffrk.dll got corrupted (no entry point found). I replaced those from other system. The corrution message do not come anymore, but as soon as I try to run my test program, it crahses again ....
Blue Screen Message: "KMODE_EXCEPTION-NOT-HNADLED ...Adress FD337FAC has base address at FD327000-NYPALK.SYS ..."
Does anyone has any solutions/ update!
Thank YOU.

Hi Anna:
Primarily it crahses when I open the Measurement and Automation Explorer (as well as run when I run application which uses Digital IO-PXI-6527, GPIB, Relays PXI-2565..). It is NOT a new setup, but the problem is new. Initially it was related to "failure to find entry point to a dll >> nibffrk.dll". Then I copied the dll from another PXI-1006 chasis and replaced in this machine. But problem is still there!
Please note the environment is as follows: PXI-1006 chasis with PXI-6527, 2565, 6070, 4060, 5102; OS WinNT 4.0 - CVI 5.5-Measurement and Automation Explorer 2.0. In my application I am using NI-DAQ driver.
Should I reinstall the machine ?
Thank you very much.
Delowar

Similar Messages

System crash (blue screen) during CD burn

Hello All,
I need your advise due to serious problem with my PC. Per technical specification located in the following site CPU support: the motherboard supports 133/266 MHz FSB and Ratio 12.5.
Unfortunately, I found out that my recently purchased computer doesn’t work at such frequency(FSB=133, Ratio = 12.5), namely, all operation related to the DVD-ROM (Pioneer DVD-120) or Samsung CD-R/RW eventually caused system crash. I tryed to reinstall the OS, however it has not solved the problem. Only frequency decreasing allows to avoid the crash(blue screen of death). The proper volatages and temperature value are as follows: Vcore = 1.74V. PS_3v = 3.25V, PS_5v = 4.95V, PS_12v = 12.24V, Tcpu = 48C, Tsys = 33C.
Please advise,
Thanks, Raz Noam
Here is my configuration:
Athlon XP 2000+
KT4V MS6712 motherboard
256 Mb DDR 333 Smasung
40 Gb IDE master on IDE1
60 Gb IDE slave on IDE1
Samsung SW 248F master
Pioneer DVD-120 slave
Windows XP Home Edition

System crash that I have experienced occurs only during CD Burner or DVD activities. It is very random, however I have notice that when I am burning CD (test mode only) the system crash occurs quite often. I attribute it to the fact that this mode is perhaps harder than only play. However, system crash occurs also during play mode. The crash is actualy stop mode with different error core, I mean, stop 0xd1, 0x0A, 24, 77. BTW, I dissabled autoreboot option. So far it was no problem with reboot after crash. So, I suspected some problem with mainboard, however, perhaps, that PSU can impcat as well. Unfortunately, I have no experience with PC hardware, therefore I need your advice based on rich experience. What I dare to assume that the problem rather in hardware than in SW.

K8N neo Platinum Win XP SP2 random system crashes/Blue screen

I have recently built a new pc with the items as listed in my signature. Some of the compontents were new (RAM, HDD and VIdeo) and some were second hand (CPU, M/B, Keyboard and Mouse). I found that when I install WIN XP the system seems ok. But after I install any SP1 or SP2 which are required to run the USB2.0 my system crashes randomly and I get a windows blue screen and an auto restart. in the last week it sometimes lasts a day or so then it crashes. Other times it will crash within 5 minutes of start-up. I found a forum topic about a similar problem the other day but when I went looking for it again I couldn't find that topic. In that topic there were comments about PSU's and their ability to run the K8N Neo Platinum. In my specs are my PSU details. Can anyone advise if my PSU may be the problem or if there is any other problem.
I have made a WIN XP boot disk with SP1 and I have an SP2 disk I was given by a PC shop. If you are able to help or need further info to be able to help please let me know.
Regards
Kewlcop

Quote from: PStang on 18-March-05, 05:14:57
i had random shutdowns and blue screens until i uninstalled core center
LOL!
Yet another reason NOT to use Core Center!
This ought to have it's own sticky - Experiencing random reboots & blue screens? Uninstall Core Center first!

H8-1360t w/ Intel Core i7-3770 CPU @ 3.40 GHz w/ 16.0 GB RAM SYSTEM BLUE-SCREENED 3 TIMES SO FAR

HP Pavilion HPE h8-1360t CTO Desktop PC
h8-1360t w/ Intel Core i7-3770 CPU @ 3.40 GHz w/ 16.0 GB RAM was first turned on 5 days ago.
All updates, HP & Microsoft have been installed.
The SYSTEM has BLUE-SCREENED THREE (3) times today, actually over the last FIVE (5) hours.
3 TIMES SO FAR that is, it was first turned on @ 5 days ago.

Yes, i know what you are talking about, i have had my HP 1360t for about a month now and since day 1 when i turned it on it has been going to the HP blue screen of death here and there....and then when i click on find a solution when the computer boots back up there isnt one..... very dissapointing especially seeing as how it was a early christmas present for me and my wife because she started college at my duty station here away from family in japan. h8-1360t w/ Intel Core i7-3770 CPU @ 3.40 GHz w/ 8GB ram.... amd hd radeon 7950, i have no clue what this may be if anybody could help, i would really appreciate it, this feels more and more like a waiste of 1,500 dollars everyday and my wife is mad at me for buying her a christmas present that she wanted but now in her eyes was a waiste of money..... {Personal Information Removed}

A blue screen error and suddenly shutdown on my Sat M70

i have a M70 laptop i buy it just 3 weeks ago. i start facing the following problems
- system exhibit blue screen with an error message that i do not understand ( ) just when i slightly move my laptop or even when just changing the screen angle!!!!!!!!!!!! ( sometimes with a stange noise from the right highspeaker)
- sometimes the screen shutdown but the system is usually running ( i can hear noise and LED is brightning)
i am recognizing your help and interest

Hi
Usually if the Blue Screen error message occurs, so it could be a serious software fault or a hardware malfunction.
There is no generally solution for this problem. In my opinion you should check, if the software is responsible for this malfunction.
Try to install new OS or recover the unit with the delivered recovery CD.
Maybe this will solve the problems.
If not so it must be something wrong with the hardware. You should contact the Toshiba service. He can run some diagnostic test and you will get a detailed answer what its wrong.

Blue Screen When using Magic Bullet Instant HD in Premiere Pro CC

When using Adobe Premiere Pro CC, using Magic Bullet Instant HD to convert a 720p video to a 1080p. The system will blue screen and the problem dll file seems to be hal.dll.
What is the cause of this?
and how to fix it?
System Specs:
OS: Win 7 Ultimate 64 bit
CPU: i7 3770k 3.5 Ghz
RAM: 16 GB
GRAPHICS: AMD Radeon HD 7700
MOTHERBOARD: ASRock Z77 Extreme6
STORAGE: 1 TB local disk, 3 2TB Expanded driver attached to 3.0 port
Wireless mouse and keyboard

Hi Kris,
I have checked all the three dumps, they all showed the same bugcheck 124.
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 124, {0, fffffa8010821028, be200000, 21136}
Probably caused by : GenuineIntel
Followup: MachineOwner
6: kd> !analyze -v
* Bugcheck Analysis *
WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa8010821028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000be200000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000021136, Low order 32-bits of the MCi_STATUS value.
Debugging Details:
BUGCHECK_STR: 0x124_GenuineIntel
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
PROCESS_NAME: Adobe Premiere
CURRENT_IRQL: f
ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
STACK_TEXT:
fffff880`0350ab58 fffff800`03413a3b : 00000000`00000124 00000000`00000000 fffffa80`10821028 00000000`be200000 : nt!KeBugCheckEx
fffff880`0350ab60 fffff800`035d6463 : 00000000`00000001 fffffa80`10817950 00000000`00000000 fffffa80`108179a0 : hal!HalBugCheckSystem+0x1e3
fffff880`0350aba0 fffff800`03413700 : 00000000`00000728 fffffa80`10817950 fffff880`0350af30 fffff880`0350af00 : nt!WheaReportHwError+0x263
fffff880`0350ac00 fffff800`03413052 : fffffa80`10817950 fffff880`0350af30 fffffa80`10817950 00000000`00000000 : hal!HalpMcaReportError+0x4c
fffff880`0350ad50 fffff800`03412f0d : 00000000`00000008 00000000`00000001 fffff880`0350afb0 00000000`00000000 : hal!HalpMceHandler+0x9e
fffff880`0350ad90 fffff800`03406e88 : 000007ff`fda7f140 00000000`00000b40 00000000`00000000 00000000`00000000 : hal!HalpMceHandlerWithRendezvous+0x55
fffff880`0350adc0 fffff800`034be4ac : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : hal!HalHandleMcheck+0x40
fffff880`0350adf0 fffff800`034be313 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KxMcheckAbort+0x6c
fffff880`0350af30 00000000`0352f2c9 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiMcheckAbort+0x153
00000000`36c0cdd0 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x352f2c9
STACK_COMMAND: kb
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: GenuineIntel
IMAGE_NAME: GenuineIntel
DEBUG_FLR_IMAGE_TIMESTAMP: 0
IMAGE_VERSION:
FAILURE_BUCKET_ID: X64_0x124_GenuineIntel_PROCESSOR_CACHE
BUCKET_ID: X64_0x124_GenuineIntel_PROCESSOR_CACHE
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:x64_0x124_genuineintel_processor_cache
FAILURE_ID_HASH: {270f58cb-a20a-a72d-6d81-eb8c82f01f7a}
Followup: MachineOwner
Information for Bugcheck 124:
Bug Check 0x124: WHEA_UNCORRECTABLE_ERROR.
Bugcheck 124, This bug check indicates that a fatal hardware error has occurred. This bug check uses the error data that is provided by the Windows Hardware Error Architecture (WHEA).
Which is probably caused by "GenuineIntel". Make sure we have updated the BIOS drivers, take a check with the hardware tool provided by the manufacturer, or you may take a check with them.
Best regards
Michael Shao
TechNet Community Support

MDT 2012 U1 Blue Screen on task sequence ??

My Customer have MDT 2012 U1, so when he start a task sequence when the task start apply operating system, after the system restart and when the computer install the system the blue screen appear. It is very strange beacause the same task sequence work on
some other model but in this Lenove M82 (3306-G1F) and M82 (M3395-AB4) we have the same error. But on other Lenovo model the same task work very fine. Why?
SMSTS.log
We do not find an available volume to store the local data path TSManager 2014-09-11 08:54:07 1892 (0x0764)
Set a global environment variable _SMSTSNextInstructionPointer=24 TSManager 2014-09-11 08:54:07 1892 (0x0764)
Set a TS execution environment variable _SMSTSNextInstructionPointer=24 TSManager 2014-09-11 08:54:07 1892 (0x0764)
Set a global environment variable _SMSTSInstructionStackString=22 TSManager 2014-09-11 08:54:07 1892 (0x0764)
Set a TS execution environment variable _SMSTSInstructionStackString=22 TSManager 2014-09-11 08:54:07 1892 (0x0764)
Save the current environment block TSManager 2014-09-11 08:54:07 1892 (0x0764)
pszPath[0] != L'\0', HRESULT=80070057 (c:\qfe\nts_sms_fre\sms\framework\core\ccmcore\path.cpp,58) TSManager 2014-09-11 08:54:07 1892 (0x0764)
Filesystem::Path::Add(sEnvPath, EnvDataFileName, sEnvPath), HRESULT=80070057 (e:\nts_sms_fre\sms\framework\tscore\environmentlib.cpp,639) TSManager 2014-09-11 08:54:07 1892 (0x0764)
Failed to save environment to (80070057) TSManager 2014-09-11 08:54:07 1892 (0x0764)
TS::Environment::SharedEnvironment.saveEnvironment(szPath), HRESULT=80070057 (e:\nts_sms_fre\sms\client\tasksequence\executionengine\executionenv.cxx,842) TSManager 2014-09-11 08:54:07 1892 (0x0764)
Failed to save the current environment block. This is usually caused by a problem with the program. Please check the Microsoft Knowledge Base to determine if this is a known issue or contact Microsoft Support Services for further assistance.
Unknown error (Error: 80070057; Source: Unknown) TSManager 2014-09-11 08:54:07 1892 (0x0764)
SaveEnvironment(), HRESULT=80070057 (e:\nts_sms_fre\sms\client\tasksequence\executionengine\executionenv.cxx,420) TSManager 2014-09-11 08:54:07 1892 (0x0764)
Failed to persist execution state. Error 0x(80070057) TSManager 2014-09-11 08:54:07 1892 (0x0764)
Failed to save execution state and environment to local hard disk TSManager 2014-09-11 08:54:07 1892 (0x0764)
Start executing an instruciton. Instruction name: New Computer only. Instruction pointer: 24 TSManager 2014-09-11 08:54:07 1892 (0x0764)
Set a global environment variable _SMSTSCurrentActionName=New Computer only TSManager 2014-09-11 08:54:07 1892 (0x0764)
Set a global environment variable _SMSTSNextInstructionPointer=24 TSManager 2014-09-11 08:54:07 1892 (0x0764)
Evaluating an AND expression TSManager 2014-09-11 08:54:07 1892 (0x0764)
Evaluating a variable condition expression TSManager 2014-09-11 08:54:07 1892 (0x0764)
Variable = DeploymentType TSManager 2014-09-11 08:54:07 1892 (0x0764)
Value = NEWCOMPUTER TSManager 2014-09-11 08:54:07 1892 (0x0764)
Operator = equals TSManager 2014-09-11 08:54:07 1892 (0x0764)
Expand a string: equals TSManager 2014-09-11 08:54:07 1892 (0x0764)
Expand a string: DeploymentType TSManager 2014-09-11 08:54:07 1892 (0x0764)
Expand a string: NEWCOMPUTER TSManager 2014-09-11 08:54:07 1892 (0x0764)
The variable condition expression is evaluated to be TRUE TSManager 2014-09-11 08:54:07 1892 (0x0764)
The AND expression is evaluated to be TRUE TSManager 2014-09-11 08:54:07 1892 (0x0764)
The condition for the group (New Computer only) is evaluated to be true TSManager 2014-09-11 08:54:07 1892 (0x0764)
The group (New Computer only) has been successfully started TSManager 2014-09-11 08:54:07 1892 (0x0764)
Sending status message . . . TSManager 2014-09-11 08:54:07 1892 (0x0764)
Executing in non SMS standalone mode. Ignoring send a task execution status message request TSManager 2014-09-11 08:54:07 1892 (0x0764)
User did not specify local data drive TSManager 2014-09-11 08:54:07 1892 (0x0764)
Volume D:\ is not a fixed hard drive TSManager 2014-09-11 08:54:07 1892 (0x0764)
Volume X:\ is not a fixed hard drive TSManager 2014-09-11 08:54:07 1892 (0x0764)
Volume Z:\ is not a fixed hard drive TSManager 2014-09-11 08:54:07 1892 (0x0764)
BDD.log
Property LogPath is now = X:\MININT\SMSOSD\OSDLOGS LiteTouch 2014-09-11 08:53:34 0 (0x0000)
Microsoft Deployment Toolkit version: 6.1.2373.0 LiteTouch 2014-09-11 08:53:34 0 (0x0000)
Property Debug is now = FALSE LiteTouch 2014-09-11 08:53:34 0 (0x0000)
ZTIUtility!GetAllFixedDrives (Faux) LiteTouch 2014-09-11 08:53:34 0 (0x0000)
ZTIUtility!GetAllFixedDrives = LiteTouch 2014-09-11 08:53:34 0 (0x0000)
No task sequence is in progress. LiteTouch 2014-09-11 08:53:34 0 (0x0000)
New ZTIDisk :
\\MININT-KGJQ3PL\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0" LiteTouch 2014-09-11 08:53:34 0 (0x0000)
Found Possible OS TargetDisk:
\\MININT-KGJQ3PL\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0" LiteTouch 2014-09-11 08:53:34 0 (0x0000)
GetPartitions: 0 LiteTouch 2014-09-11 08:53:34 0 (0x0000)
Did not find disk. LiteTouch 2014-09-11 08:53:34 0 (0x0000)
Property SMSTSLocalDataDrive is now = LiteTouch 2014-09-11 08:53:34 0 (0x0000)
Unable to connect to BCDStore. LiteTouch 2014-09-11 08:53:40 0 (0x0000)
Not running within WinPE or WinRE. LiteTouch 2014-09-11 08:53:40 0 (0x0000)
Property DeploymentMethod is now = UNC LiteTouch 2014-09-11 08:53:40 0 (0x0000)
DeploymentMethod = UNC LiteTouch 2014-09-11 08:53:40 0 (0x0000)
Property DeployRoot is now = X:\Deploy LiteTouch 2014-09-11 08:53:40 0 (0x0000)
Using a local or mapped drive, no connection is required. LiteTouch 2014-09-11 08:53:40 0 (0x0000)
DeployRoot = X:\Deploy LiteTouch 2014-09-11 08:53:40 0 (0x0000)
Property DeployDrive is now = X: LiteTouch 2014-09-11 08:53:40 0 (0x0000)
DeployDrive = X: LiteTouch 2014-09-11 08:53:40 0 (0x0000)
Property PHASE is now = PREINSTALL LiteTouch 2014-09-11 08:53:40 0 (0x0000)
Property DeploymentType is now = NEWCOMPUTER LiteTouch 2014-09-11 08:53:40 0 (0x0000)
Phase = PREINSTALL LiteTouch 2014-09-11 08:53:40 0 (0x0000)
About to run command: wscript.exe "X:\Deploy\Scripts\ZTIGather.wsf" /inifile:Bootstrap.ini LiteTouch 2014-09-11 08:53:40 0 (0x0000)
Property inifile is now = Bootstrap.ini ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Microsoft Deployment Toolkit version: 6.1.2373.0 ZTIGather 2014-09-11 08:53:40 0 (0x0000)
------------------------- Object Initialization ------------------------- ZTIGather 2014-09-11 08:53:40 0 (0x0000)
------------------------- Initialization ------------------------- ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Synchronizing the environments. ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Property DeployRoot is now = X:\Deploy ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Property DeployDrive is now = X: ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Finished synchronizing the environments. ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Property definition is now = BDD_Welcome_ENU.xml Wizard 2014-09-11 08:53:40 0 (0x0000)
Microsoft Deployment Toolkit version: 6.1.2373.0 Wizard 2014-09-11 08:53:40 0 (0x0000)
Getting OS info ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Property OSCurrentVersion is now = 6.1.7601 ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Property OSCurrentBuild is now = 7601 ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Property OSVersion is now = WinPE ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Property IsServerOS is now = False ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Property IsServerCoreOS is now = False ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Finished getting OS info ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Getting HAL information ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Not Wizard = Faux Wizard 2014-09-11 08:53:40 0 (0x0000)
Property WizardComplete is now = N Wizard 2014-09-11 08:53:40 0 (0x0000)
Property HALName is now = acpiapic ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Finished getting HAL information ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Getting network info ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Checking network adapter: [00000000] Intel(R) 82579LM Gigabit Network Connection ZTIGather 2014-09-11 08:53:40 0 (0x0000)
MAC address = 44:37:E6:D0:8F:EF ZTIGather 2014-09-11 08:53:40 0 (0x0000)
IP Address = 10.26.33.23 ZTIGather 2014-09-11 08:53:40 0 (0x0000)
IP Address = fe80::8d70:f039:f93f:e5e9 ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Default Gateway = 10.26.32.1 ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Property IPAddress001 is now = 10.26.33.23 ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Property IPAddress002 is now = fe80::8d70:f039:f93f:e5e9 ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Property MacAddress001 is now = 44:37:E6:D0:8F:EF ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Property DefaultGateway001 is now = 10.26.32.1 ZTIGather 2014-09-11 08:53:40 0 (0x0000)
Finished getting network info ZTIGather 2014-09-11 08:53:41 0 (0x0000)
Getting DP info ZTIGather 2014-09-11 08:53:41 0 (0x0000)
Unable to determine ConfigMgr distribution point ZTIGather 2014-09-11 08:53:41 0 (0x0000)
Finished getting DP info ZTIGather 2014-09-11 08:53:41 0 (0x0000)
Getting WDS server info ZTIGather 2014-09-11 08:53:41 0 (0x0000)
Unable to determine WDS server name, probably not booted from WDS. ZTIGather 2014-09-11 08:53:41 0 (0x0000)
Finished getting WDS server info ZTIGather 2014-09-11 08:53:41 0 (0x0000)
Property HostName is now = MININT-KGJQ3PL ZTIGather 2014-09-11 08:53:41 0 (0x0000)
Getting asset info ZTIGather 2014-09-11 08:53:41 0 (0x0000)
Unable to determine asset tag via WMI. ZTIGather 2014-09-11 08:53:41 0 (0x0000)
FindFile(...\Microsoft.BDD.Utility.dll) Result : 0 ZTIGather 2014-09-11 08:53:42 0 (0x0000)
RUN: regsvr32.exe /s "X:\Deploy\Tools\x86\Microsoft.BDD.Utility.dll" ZTIGather 2014-09-11 08:53:42 0 (0x0000)
FindFile: The file x64\Microsoft.BDD.Utility.dll could not be found in any standard locations. ZTIGather 2014-09-11 08:53:42 0 (0x0000)
FindFile(...\Microsoft.BDD.Utility.dll) Result : 1 ZTIGather 2014-09-11 08:53:42 0 (0x0000)
RUN: regsvr32.exe /s "" ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property AssetTag is now = ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property SerialNumber is now = MJ24PLX ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property Make is now = LENOVO ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property Model is now = 3306G1F ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property Product is now = MAHOBAY ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property UUID is now = 4C5C19C8-5CD9-11E3-8E8B-153233E31400 ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property Memory is now = 3891 ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property Architecture is now = X86 ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property ProcessorSpeed is now = 3300 ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property CapableArchitecture is now = AMD64 X64 X86 ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property IsLaptop is now = False ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property IsDesktop is now = True ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property IsServer is now = False ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property IsUEFI is now = False ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property IsOnBattery is now = False ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property SupportsX86 is now = True ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property SupportsX64 is now = True ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property SupportsSLAT is now = False ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Finished getting asset info ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Getting OS SKU info ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Unable to determine Windows SKU while in Windows PE. ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Determining the Disk and Partition Number from the Logical Drive X:\WINDOWS ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property OriginalArchitecture is now = ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Getting virtualization info ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property IsHypervisorRunning is now = False ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property SupportsVT is now = True ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property SupportsNX is now = True ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property Supports64Bit is now = True ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property SupportsHyperVRole is now = True ZTIGather 2014-09-11 08:53:42 0 (0x0000)
This computer does not appear to be a virtual machine (BIOS is 'LENOVO - 14c0'). ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property IsVM is now = False ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Finished getting virtualization info ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Connection succeeded to MicrosoftVolumeEncryption ZTIGather 2014-09-11 08:53:42 0 (0x0000)
There are no encrypted drives ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property IsBDE is now = False ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Processing the PREINSTALL phase. ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Determining the INI file to use. ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Finished determining the INI file to use. ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Using from [Settings]: Rule Priority = DEFAULT ZTIGather 2014-09-11 08:53:42 0 (0x0000)
------ Processing the [DEFAULT] section ------ ZTIGather 2014-09-11 08:53:42 0 (0x0000)
Property DEPLOYROOT is now = \\10.26.32.40\DeploymentShare$ ZTIGather 2014-09-11 08:53:43 0 (0x0000)
Using from [DEFAULT]: DEPLOYROOT =
\\10.26.32.40\DeploymentShare$ ZTIGather 2014-09-11 08:53:43 0 (0x0000)
Property USERID is now = Administrateur ZTIGather 2014-09-11 08:53:43 0 (0x0000)
Using from [DEFAULT]: USERID = Administrateur ZTIGather 2014-09-11 08:53:43 0 (0x0000)
Property USERDOMAIN is now = crdiq03 ZTIGather 2014-09-11 08:53:43 0 (0x0000)
Using from [DEFAULT]: USERDOMAIN = crdiq03 ZTIGather 2014-09-11 08:53:43 0 (0x0000)
<Message containing password has been suppressed> ZTIGather 2014-09-11 08:53:43 0 (0x0000)
<Message containing password has been suppressed> ZTIGather 2014-09-11 08:53:43 0 (0x0000)
Property KEYBOARDLOCALEPE is now = 0c0c:00001009 ZTIGather 2014-09-11 08:53:43 0 (0x0000)
Using from [DEFAULT]: KEYBOARDLOCALEPE = 0c0c:00001009 ZTIGather 2014-09-11 08:53:43 0 (0x0000)
Property SKIPBDDWELCOME is now = YES ZTIGather 2014-09-11 08:53:43 0 (0x0000)
Using from [DEFAULT]: SKIPBDDWELCOME = YES ZTIGather 2014-09-11 08:53:43 0 (0x0000)
------ Done processing X:\Deploy\Scripts\Bootstrap.ini ------ ZTIGather 2014-09-11 08:53:43 0 (0x0000)
Remapping variables. ZTIGather 2014-09-11 08:53:43 0 (0x0000)
Property TaskSequenceID is now = ZTIGather 2014-09-11 08:53:43 0 (0x0000)
Property DeploymentType is now = NEWCOMPUTER ZTIGather 2014-09-11 08:53:43 0 (0x0000)
Finished remapping variables. ZTIGather 2014-09-11 08:53:43 0 (0x0000)
ZTIGather processing completed successfully. ZTIGather 2014-09-11 08:53:43 0 (0x0000)
Command completed, return code = 0 LiteTouch 2014-09-11 08:53:43 0 (0x0000)
Property WizardComplete is now = Y Wizard 2014-09-11 08:53:44 0 (0x0000)
About to run command: wpeutil.exe SetKeyboardLayout 0c0c:00001009 LiteTouch 2014-09-11 08:53:44 0 (0x0000)
Command completed, return code = 0 LiteTouch 2014-09-11 08:53:44 0 (0x0000)
Validating connection to \\10.26.32.40\DeploymentShare$ LiteTouch 2014-09-11 08:53:44 0 (0x0000)
Mapped Network UNC Path Z: =
\\10.26.32.40\DeploymentShare$ LiteTouch 2014-09-11 08:53:44 0 (0x0000)
Found Existing UNC Path Z: =
\\10.26.32.40\DeploymentShare$ LiteTouch 2014-09-11 08:53:44 0 (0x0000)
Successfully established connection using supplied credentials. LiteTouch 2014-09-11 08:53:44 0 (0x0000)
About to run command: wscript.exe "X:\Deploy\Scripts\ZTIGather.wsf" /nolocalonly LiteTouch 2014-09-11 08:53:44 0 (0x0000)
Property definition is now = WelcomeWiz_Initialize.xml Wizard 2014-09-11 08:53:44 0 (0x0000)
Microsoft Deployment Toolkit version: 6.1.2373.0 Wizard 2014-09-11 08:53:44 0 (0x0000)
Property nolocalonly is now = ZTIGather 2014-09-11 08:53:44 0 (0x0000)
Microsoft Deployment Toolkit version: 6.1.2373.0 ZTIGather 2014-09-11 08:53:44 0 (0x0000)
------------------------- Object Initialization ------------------------- ZTIGather 2014-09-11 08:53:44 0 (0x0000)
------------------------- Initialization ------------------------- ZTIGather 2014-09-11 08:53:44 0 (0x0000)
Synchronizing the environments. ZTIGather 2014-09-11 08:53:44 0 (0x0000)
Property DeployRoot is now = \\10.26.32.40\DeploymentShare$ ZTIGather 2014-09-11 08:53:44 0 (0x0000)
Property DeployDrive is now = X: ZTIGather 2014-09-11 08:53:44 0 (0x0000)
Finished synchronizing the environments. ZTIGather 2014-09-11 08:53:44 0 (0x0000)
Skipping local settings gathering because it has already been done. ZTIGather 2014-09-11 08:53:44 0 (0x0000)
Processing the PREINSTALL phase. ZTIGather 2014-09-11 08:53:44 0 (0x0000)
Determining the INI file to use. ZTIGather 2014-09-11 08:53:44 0 (0x0000)
Not Wizard = Faux Wizard 2014-09-11 08:53:44 0 (0x0000)
Property WizardComplete is now = N Wizard 2014-09-11 08:53:44 0 (0x0000)
Using DEFAULT VALUE: Ini file =
\\10.26.32.40\DeploymentShare$\Control\CustomSettings.ini ZTIGather 2014-09-11 08:53:44 0 (0x0000)
Finished determining the INI file to use. ZTIGather 2014-09-11 08:53:44 0 (0x0000)
Added new custom property MYCUSTOMPROPERTY ZTIGather 2014-09-11 08:53:44 0 (0x0000)
Using from [Settings]: Rule Priority = DEFAULT ZTIGather 2014-09-11 08:53:45 0 (0x0000)
------ Processing the [DEFAULT] section ------ ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property EVENTSERVICE is now = http://10.26.32.40:9800 ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: EVENTSERVICE = http://10.26.32.40:9800 ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property OSINSTALL is now = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: OSINSTALL = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property JOINWORKGROUP is now = GROUPE ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: JOINWORKGROUP = GROUPE ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property TIMEZONE is now = 035 ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: TIMEZONE = 035 ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property TIMEZONENAME is now = Eastern Standard Time ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: TIMEZONENAME = Eastern Standard Time ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property KEYBOARDLOCALE is now = 0c0c:00001009 ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: KEYBOARDLOCALE = 0c0c:00001009 ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property USERLOCALE is now = fr-CA ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: USERLOCALE = fr-CA ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property UILANGUAGE is now = fr-CA ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: UILANGUAGE = fr-CA ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property SKIPCAPTURE is now = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: SKIPCAPTURE = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
<Message containing password has been suppressed> ZTIGather 2014-09-11 08:53:45 0 (0x0000)
<Message containing password has been suppressed> ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property SKIPAPPLICATIONS is now = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: SKIPAPPLICATIONS = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property SKIPCOMPUTERBACKUP is now = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: SKIPCOMPUTERBACKUP = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property SKIPDOMAINMEMBERSHIP is now = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: SKIPDOMAINMEMBERSHIP = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property SKIPCOMPUTERNAME is now = NO ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: SKIPCOMPUTERNAME = NO ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property SKIPDEPLOYMENTTYPE is now = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: SKIPDEPLOYMENTTYPE = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property SKIPUSERDATA is now = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: SKIPUSERDATA = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property SKIPPACKAGEDISPLAY is now = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: SKIPPACKAGEDISPLAY = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Property SKIPLOCALESELECTION is now = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000)
Using from [DEFAULT]: SKIPLOCALESELECTION = YES ZTIGather 2014-09-11 08:53:45 0 (0x0000

Hi,
I agree with Damon.
Might be the ConfigMgr Driver Injector will help you.
This tool will allow you to capture installed drivers on your workstations and then will automatically import them in ConfigMgr 2012.
http://gallery.technet.microsoft.com/ConfigMgr-Driver-Injector-aae7d17d
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I did not install bonjour when I installed itunes now everytime I go to the itunes store I get the blue screen. How to download bonjour? Do I have to re install itunes? If I do, will my music be lost?

I did not install bonjour when I installed itunes now everytime I go to the itunes store I get the blue screen. How to download bonjour? Do I have to re install itunes? If I do, will my music be lost?

I'd try the following document first:
iTunes for Windows: System restarts, blue screen, or quits unexpectedly when accessing iTunes Store

Live CAM Video IM Pro - Blue Screen (KS.SYS)

Just purchased Live CAM Video IM Pro first creative product.
My System: WinXP SP2, GB, Over 8 GB system space free.
Installation went fine (no errors) post install requested reboot .. rebooted system. Blue Screen with KS.SYS.
Uninstalled all software. re-installed with bare minimum. Troubleshooted the system multiple times. Finally got the culprit (Live Cam Video IM Pro driver).
Without driver system works fine with drivers Blue Screen. Tried backup copy of KS.sys no success (seems KS.sys is dinged!)
Result: The cam is useless.
Any help is greatly appreciated.

no one can help me? plz thx

Cisco VPN Client Blue Screen Windows Vista

I am using Cisco Client IPSec VPN version 5.0.07.0410. Installed on a Windows Vista operating system. Blue screen in Windows occurs after I have entered userid and password. Can anyone shed any light on this? I know that Cisco operates fine with XP and Windows 7 but has had issues with Vista?
Thank you
Carlos

Andrew,
Thank you. As soon as we upgraded Vista to SP2, it worked. The issue was with the OS not having the proper updates to interact with the Cisco VPN client.
Appreciate all the support.
Carlos

Screen fades to blue screen continually (video attached)

Here is what is going on. On boot the computer would lock up after the spinning gear. Or it seem to. It would get past the apple logo, flash pink for a second and go to a white screen. I could hear the hard drives being accessed but it never seemed to come out of this white screen after waiting 10 or minutes. So I ran the hardware test on this computer. It found no problems, so rebooted and oddly enough I the computer booted fine. However occasionally after being logged in the computer would flash to a blue screen and fade back in. This is the same animation you see when you log into your machine right before you see the desktop. In some cases it will continue over and over (see the youtube link bellow). Even booting off the original restore disc this issue kept continuing. Which leads me to believe its a hardware issue. Ive tried, resting the PRAM, SMC, ran the hardware test a second time, ran a check on the hard drive using disk utility, fixed the permissions, swapped out dvi cables, and changed out the power strip. I am leaning towards it being a video card issue, but i cant be for sure. The problem is intermittent, so its hard to track down. Has anyone seen an issue like this before?????
http://www.youtube.com/watch?v=jtN6pU0eW5A
Computer specs:
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 2
Total Number Of Cores: 4
Memory: 5 GB
Chipset Model: NVIDIA GeForce 7300 GT
PCI-E audio card: http://www.motu.com/products/pciaudio/2408/

Have you figured out the solution for this? I'm experiencing the same problem with almost the same setup.
Model Name:          Mac Pro
Model Identifier:          MacPro3,1
Processor Name:          Quad-Core Intel Xeon
Processor Speed:          3.2 GHz
Number Of Processors:          2
Total Number Of Cores:          8
Chipset Model:          NVIDIA GeForce 8800 GT
MOTU PCIe-424 2408mk3
I've just recently upgraded to Snow Leopard 10.6.3, when this blue screen issue started to bug me. I tried resetting the
RAMs and GFX card, but to no good result. I also tried to remove the PCIe-424 card, and found out that this causes to stuck the system in blue screen. I was wondering maybe MOTU has new released driver for OS X 10.6. I only downloaded the latest driver for mac which is for 10.4 and up. But whenever I'm plugging back the PCI card in, the blue screen problem still occurs and cannot continue with the installation procedure anymore.
Hope someone could give me idea on any solution for this.

Blue Screen Blue Screen Blue Screen

YOU ARE NOT ALONE!

Have you figured out the solution for this? I'm experiencing the same problem with almost the same setup.
Model Name:          Mac Pro
Model Identifier:          MacPro3,1
Processor Name:          Quad-Core Intel Xeon
Processor Speed:          3.2 GHz
Number Of Processors:          2
Total Number Of Cores:          8
Chipset Model:          NVIDIA GeForce 8800 GT
MOTU PCIe-424 2408mk3
I've just recently upgraded to Snow Leopard 10.6.3, when this blue screen issue started to bug me. I tried resetting the
RAMs and GFX card, but to no good result. I also tried to remove the PCIe-424 card, and found out that this causes to stuck the system in blue screen. I was wondering maybe MOTU has new released driver for OS X 10.6. I only downloaded the latest driver for mac which is for 10.4 and up. But whenever I'm plugging back the PCI card in, the blue screen problem still occurs and cannot continue with the installation procedure anymore.
Hope someone could give me idea on any solution for this.

W700 Win7 x64 blue screen after screen replacement

Hopefully somebody has a solution for this issue. Recently I sent my W700 in for a screen replacement and when I received it back, I installed my HD (Win7 x64 Ultimate) and the system would blue screen.
I tried all the different start up options and all failed with a blue screen
The blue screen goes away so fast I cannot see what it is telling me
Sometimes as it is attemption to boot I will see a screen that states "The boot selection failed because a required device is inaccessible"
I attempted a repair and see the following (the repair fails)
Windows Boot Mgr
ID 9DEA862C-5CDD-4E70-ACC1-F32B344D4795
Startup option will be added
Name: Win Recovery Env (Recovered)
Path: Recovery\103c3ec-e604-11de-a4f7-8c999d1797b9\Winre.wim
Windows Device: Partition-E476835 MB)
A copy of the current boot configuration data will be saved as D:\Boot\BCD.Backup.0001
I click Repair & Restart, the system blue screens when it boots
In that I was using my "production disk" I switched to the previous Win7 x64 Ultimate drive I had in the system - same failure and results with this drive as well
I then switched to the Vista drive that was in the system when I received it 0 same failure and results with this drive as well
I then installed a new 500GB drive and started a new build - this worked but I'm having trouble getting Outlook x32 2010 to work with my previous Outlook.pst file
I've restored the MBR and the 100MB partition on one of my Win7 drives using the MBR and 100MB partition from the new working drive - still I get the blue screen.
I need one of two solutions (as I see it)
Get my production Win7 x64 drive working (this is the drive that blue screens)
Get the new HD with the new Win7 build working with Outlook.
I've talked to the support center they don't know what is going on but offered to ship the W700 back and look at it. If they could not resolve the issue they would reimage the HD. This is not an acceptable solution. I already know that if I rebuild the HD it will work.
jgt1942

Your computer is experiencing problems with the installed updates. Do check existing updates list and remove all recently installed updates. There is a good possibility that some updates wouldn't work properly or they are not properly installed. For diagnostic information please visit here.
1. Click Start, type "installed updates" in the Search Box.
2. Press ENTER.
3. Right click an update, select Uninstall.

Blue screen--how to resolve

      Blue screen. The problem was not resolved at all.
      I do not know what on earth happen to my notebook, I just use the Quicktime player to see Apple laptop advertisement in apple website, when I were watching the advertisement, there was a stop, and show "window Explore has encountered a problem, and needs to close" subsequently, Blue screen. I just changed the Region and Language from English to Chinese in control panel. Sometimes, I just let the computer stand there for a long time, the blue screen appeared. I had no choice but to use the recovery system to restore the system, even when I use the ThinkVantage to recover the system, the Blue screen appeared again and again. I used the Pc-doctor to detect whether the hardwares are OK or not, but the notebook always locks up and Blue screen when I used the recovery system. It is so frequently that the whole restore can not finished. Just fortunate few times the computer can finish the detection.
All items of memory:                          failure,
CPU: register test:                             abnormal exit
CPU: math register test                     abnormal exit
then blue screen,so other items can not displayed.I need your help.thanks!

Hello Squirrel,
i think, you should call Lenovo Service and tell them the infos PC Doctor have shown to you.
Regards
Andreas
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community      Deutsche Community      Comunidad en Español

Windows "Blue screen of Death" when booting computer attached to LabVIEW PXI realtime system

Good Morning (at least in the western hemisphere)!
I'm having a problem on two test systems where intermittently, at least on one machine, I get a Windows "Blue Screen of Death" error message when booting the machine connected to a PXI RT system. I reloaded the RT systems software yesterday (LV RT 7.1.1, NI-VISA 3.3.1) and am having this problem on two different setups, two laptops, two PXI chassis. Our short term work around has been to boot with the network cable removed at one end or the other, but these are the baseline models for a larger test system in the design/construction stage that will not be used by knowledgeable engineers but by (probably more knowledgeable!) technicians. Any ideas would be a help
Thanks again,
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

Blue screens are almost always caused by drivers and not by applications, so chances are there's a problem on the driver level. The crash log file will be instrumental to diagnosing this problem.
Turn on the crash event logging as described in this Microsoft KB:
http://support.microsoft.com/kb/314084/EN-US/
...and then post the details from the crash found in the Windows Event Viewer here. That will help us narrow the problem down.
--Paul Mandeltort
Automotive and Industrial Communications Product Marketing

PXI-1006 system crahes-Blue Screen

Similar Messages

Maybe you are looking for