PXI-2503 SFP not showing correct COM"X" number?

Hi,
I have some PXI-2503 that I am using for the first time. Using it in 2-wire 24x1 mode
1) It seems to me like the SFP is always showing "COM0" whichever channel is used. My understanding is that it should be routing signals via COM0 for chan 0-5, COM1 for chan 6-11 COM2 for chan 12-17 etc and measurements show that too. But in the SFP it always indicates routing via COM0?
2) Question; is the pinout number of the TB2605 screw terminals, the asme as the numbers for the pinout of the PXI-2503? It seem to be so. Can someone confirm?
Thanks
Solved!
Go to Solution.

Hi janaf
1. Using the 2-wire 24x1 topology you are multiplexing 24 inputs to a single line. So you should only have one Common port. I guess the schematic on page 3 in the PXI-2503 Specifications has you confused. Please note the BC01, BC02 and BC03 relays in the schematic. If you switch to the Relays tab in the Soft Front Panel you will see that they are all closed in the mode your are using, meaning that signals from all inputs can reach com0.
If you change the topology to "2-Wire Dual 12x1 MUX" you will notice that bc02 turns open and in the Schematic tab you will now have an option to change bank in the top right corner. In this case Bank 0 uses com0 and Bank 1 uses com2
2. Please see this document, the pinout changes with topology
Best Regards
David
NISW

Similar Messages

SharePont 2013 Document Library lookup Column Properties not Showing Correctly when editing in Word

Hi
I keep seeing this issue albeit intermittently. I have set up a doc library for my users which has a custom content type (lookup, metadata columns, etc) . They all appear perfectly most of the time except the lookup column. Sometimes is just
decides to display the title field of the current library and not the lookup list title . It is weird as it has been working perfectly for ages given the library is populated with valid documents.
There are some fixes listed here. Has anyone got any experience of this?
https://social.msdn.microsoft.com/Forums/azure/en-US/e0b55531-509c-4219-8113-61b3e488de69/document-library-metadata-properties-of-a-content-type-do-not-show-correctly-when-editing-in-word?forum=sharepointdevelopmentprevious
Freelance consultant

Hi,
According to your post, my understanding is that the lookup column not display well while editing in word.
Did you customize the Document Information Panel?
I recommend you edit your custom document information panel or create a new document information panel, then re-publish it to check whether it works.
https://support.office.com/en-gb/article/Create-or-edit-a-custom-Document-Information-Panel-for-a-content-type-b701a9af-3ea6-4c1a-9e1c-75363bd987c9?ui=en-US&rs=en-GB&ad=GB
Or you can also use the methods in the post you have pasted to check whether it works.
As the limitation of the environment, we could not reproduce the issue in our environment.
I would suggest you open a case to Microsoft Customer Service via Phone.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

Characters codes are not showing correctly in my wesbite. I use other browser it works but her ein mozilla its not. Please help

This is my site http://globaledsource.com/ then the characters is not showing correctly. This is what happen in my site http://globaledsource.com/wp-content/uploads/2013/03/MAS_ThemeProbleme-1024x1024.jpg

Hi paulique, the simplest next test would be to disable all plugins and extensions (except Shockwave Flash, which is pretty much indispensable) here, restart Firefox, and see whether your font works without them:
orange Firefox button (or Tools menu) > Add-ons > Plugins category<br>
orange Firefox button (or Tools menu) > Add-ons > Extensions category

Fonts not showing correctly only when on my account page on app store

fonts not showing correctly only when on my account page on app store

Firstly, make sure that your device is not hidden (left hand pane). If it just reads device then toggle between SHOW and HIDE.
Secondly, try all the other ports on your computer, even a number of times.
Thirdly, if you have another computer try plugging your device into it without taking any action, give it a moment, remove it and try it back in your other computer again.
Failing all that, see here - http://support.apple.com/kb/TS1538 for Windows and http://support.apple.com/kb/TS1591 for Macs
And failing all that put the device into Recovery mode. See here and note the paragraph 'If you restore from a different computer.... ' down near the bottom of the page -
http://www.apple.com/support/ipad/assistant/itunes/

How do I report a video not showing correctly?

I tried to find a Contact Us to "Report an issue" but ended up chasing my tail.
This video is not showing correctly in the frameset during preview.
http://itunes.apple.com/us/music-video/medley-surfer-girl-wouldnt/id504074645
at least ... not for when whenever I tried to watch it.

Most every product Mozilla has is from say a mozilla.org site link.
https://mozillalabs.com/en-US/projects/
https://www.mozilla.org/en-US/products/
The only real video related thing Mozilla has is https://wiki.mozilla.org/Shumway and more info at http://mozilla.github.io/shumway/
The site you downloaded this NewVideoPlayerSetup.exe from was a scam as it uses the inexperience of users and popularity of Mozilla and the Firefox browser to trick people into installing stuff like this.
Next time if you are uncertain you should ask as somebody will then tell you if it is legitimate or not for example.

Site does not show correct on Samsung Tablet

Hi all,
I've seen a few questions regarding Muse sites not being displayed correct on a Samsung Tablet. My problem is similar but still different. The site is displaying correct on the desktop/ipad/iphone but not on the Samsung Tablet.
In the previewt his is not shown. Now I also know that the preview more or less simulates how a site should look.
This is the site: www.uwpersoonlijkeoptieadviseur.nl (a dutch site).
I have looked at the links and they seem to be ok. I mean all the links link to the Tablet version.
cheers,
Larry

Hi sanjit, the thing is that on a samsung tablet from around 3 years old the problem occurs. But on a samsung tablet almost a year /2years old the site displays correct.
Both of them has got android 4.04
See the image with the specs in which it loads correct.(white background)
And here the specs of a older one (dark grey one And arround 3 years old)
And this problem occurs:
So on a newer tablet it shows correct.
Verstuurd vanaf mijn iPhone
Op 1 apr. 2014 om 17:22 heeft Sanjit_Das <[email protected]> het volgende geschreven:
Re: Site does not show correct on Samsung Tablet
created by Sanjit_Das in Help with using Adobe Muse CC - View the full discussion
Hi Larry
Please let me know if there is any specific page element not showing up correctly on Tablet.
Also which browser are you using , browser version would help. Do you see the same problem with any other browser on same tablet.
The device details would also help.
Thanks,
Sanjit
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6261109#6261109
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6261109#6261109
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6261109#6261109. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Help with using Adobe Muse CC at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Dreamweaver codes does not show correctly

Hi, i have a problem with dreamweaver.
İ use last version Adobe CC. When i use dreamweaver for my job, codes does not show correct.
look ss please. letters cut of middle. look letter "g" "j" "y " Look MysQl letter. you see "y" is cut of
Thank you for help.

Are you using frames?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"David Powers" <[email protected]> wrote in message
news:f9hns3$soa$[email protected]..
> FlashRenaissance wrote:
>> When I try to preview my .html pages in Dreamweaver
8 it does not know
>> the page. The only thing that shows up is a page
that "Cannot be found"
>> with a strange extension (TMPztriqmk5y3.htm).
>
> See the TMP at the beginning? It stands for temporary.
>
>> Any suggestions on how I can get the pages to show
up again in preview
>> mode? Maybe something went wrong in the preferences?
>
> Go to Preferences, select Preview in Browser, and
deselect the option to
> preview using temporary files.
>
> --
> David Powers, Adobe Community Expert
> Author, "The Essential Guide to Dreamweaver CS3"
(friends of ED)
> Author, "PHP Solutions" (friends of ED)
>
http://foundationphp.com/

Not showing correct output when parsing the date

//WAP the gives the details of employees
import java.io.*;
import java.util.*;
import java.text.Format;
import java.text.DateFormat;
import java.text.ParseException;
import java.text.SimpleDateFormat;
class employee
private String nm,curr_dt;
private Date dob,doj;
private int salary;
           employee()
              nm="\0";
              dob=null;
              doj=null;
              curr_dt=null;
              salary=0;
           void getdata()throws IOException
              String dt;
              BufferedReader br=new BufferedReader(new InputStreamReader(System.in));
              //we can create date with these 3 type of objects
              Format fm=new SimpleDateFormat("dd-mm-yyyy");
              DateFormat df=new SimpleDateFormat("dd-mm-yyyy");
   //object of base class are type compatible with the object of derived class
              SimpleDateFormat sdf=new SimpleDateFormat("dd-mm-yyyy");
              System.out.print("\nEnter the name of Employee : ");
              nm=br.readLine();
              try{
              System.out.print("\nEnter the date of birth of Employee : ");
              dt=br.readLine();
              dob=(Date)fm.parseObject(dt);
              System.out.print("\nEnter the date of joining of Employee : ");
              dt=br.readLine();
              doj=df.parse(dt);
              }catch(ParseException e){
              Date d=new Date();
              curr_dt=sdf.format(d);
              System.out.print("\nEnter the salary of employee : ");
              salary=Integer.parseInt(br.readLine());
           void putdata()
              System.out.println("\n\n\nEmployee Name : "+nm);
              System.out.println("\nDate of birth : "+dob);
              System.out.println("\nDate of joining : "+doj);
              System.out.println("\nCurrent date : "+curr_dt);
              /*if((doj-curr_dt)>1)
                   salary+=3000;
              System.out.println("\nSalary of Employee : "+salary);
class emp
public static void main(String str[])throws IOException
       employee emp[]=new employee[1];
       System.out.println("\nEnter the detail of employees \n\n");
       for(int i=0;i<1;i++)
            emp=new employee();
emp[i].getdata();
System.out.println("\n\nDetail of employees are\n\n");
for(int i=0;i<1;i++)
emp[i].putdata();
}*Output:*
Enter the detail of employees
Enter the name of Employee : Rajendra Sharma
Enter the date of birth of Employee : 10-10-1979
Enter the date of joining of Employee : 05-09-2004
Enter the salary of employee : 2000
*it is not showing date in the "dd-mm-yyyy" format and not showing correct month as well*
Detail of employees are
Employee Name : Rajendra Sharma
Date of birth : Wed Jan 10 00:10:00 IST 1979
Date of joining : Mon Jan 05 00:09:00 IST 2004
Current date : 17-08-2008
Salary of Employee : 2000

Hi,
Use below code that will help u to sort ur problem.
import java.io.*;
import java.util.*;
import java.text.Format;
import java.text.DateFormat;
import java.text.ParseException;
import java.text.SimpleDateFormat;
class employee
private String nm,curr_dt;
private Date dob,doj;
private int salary;
private String dobb,dojj;
employee()
nm="\0";
dob=null;
doj=null;
curr_dt=null;
salary=0;
void getdata()throws IOException
String dt;
BufferedReader br=new BufferedReader(new InputStreamReader(System.in));
//we can create date with these 3 type of objects
DateFormat fm=new SimpleDateFormat("dd-mm-yyyy");
DateFormat df=new SimpleDateFormat("dd-mm-yyyy");
//object of base class are type compatible with the object of derived class
SimpleDateFormat sdf=new SimpleDateFormat("dd-mm-yyyy");
System.out.print("\nEnter the name of Employee : ");
nm=br.readLine();
try{
System.out.print("\nEnter the date of birth of Employee : ");
dt=br.readLine();
dob=(Date)fm.parseObject(dt);
dobb= fm.format(dob);
System.out.print("\nEnter the date of joining of Employee : ");
dt=br.readLine();
doj=df.parse(dt);
dojj = df.format(doj);
}catch(ParseException e){
Date d=new Date();
curr_dt=sdf.format(d);
System.out.print("\nEnter the salary of employee : ");
salary=Integer.parseInt(br.readLine());
void putdata()
System.out.println("\n\n\nEmployee Name : "+nm);
System.out.println("\nDate of birth : "+dobb);
System.out.println("\nDate of joining : "+dojj);
System.out.println("\nCurrent date : "+curr_dt);
/*if((doj-curr_dt)>1)
salary+=3000;
System.out.println("\nSalary of Employee : "+salary);
class emp
public static void main(String str[])throws IOException
employee emp[]=new employee[1];
System.out.println("\nEnter the detail of employees \n\n");
for(int i=0;i<1;i++)
emp=new employee();
emp[i].getdata();
System.out.println("\n\nDetail of employees are\n\n");
for(int i=0;i<1;i++)
emp[i].putdata();
thanks,
prabhu selvakumar.

The web site of Adobe does not show correctly in FireFox

I have a bizarre problem. The site of Adobe (including where I can download the flash player) does not show correctly in FireFox and I only see it as a text HTML page, but without most images (typically, for instance, I do not see the image "Download now" but see a text line "Dowload now", and so on...
This seems to specifically affect the Adobe web site as I have no problme for other web sites (so far).
It is something specific to FireFox as I do have the problem with Internet Explorer.
The problem persis even if I restart FireFox without any add-on (safe mode).
Any suggestion ?

Does this only happen in Firefox? What do you see with Internet Explorer or Chrome? If it is only Firefox, I'd try these steps in this order:
1. Clear your cookies and cache
2. Reset your Firefox settings
3. Make a new profile
Chris

Spot colors not showing correctly in acrobat 11

Spot colors not showing correctly in the output preview as well as the page correctly. I have a spot pms
295 on a page in a few different areas of text and backgrounds. The spot color shows on 1 of my backgrounds
and text and a spot color on another background does not. These items are on the same page. Although I
can use the eyedropper to check the color of these items and it states the spot color is present. The page
also prints correctly. Previews not happening.

I included 3 screen shots from Acobat 11 of the test requested. Also, included the last screen shot from Acobat 9 of same file.
Which shows correct preview. To eliminate possible ICC profile issue. I did change profiles to all that were in the profile list
with no change in either test.

Photo events do not show correctly in my iPhone

Photo events do not show correctly in my iPhone. I have 21 events in my iPhoto but they appear in many different groups in my iPhone.

Mine too. Anyone have a clue how to fix this?

Few of the text in Tibetan language subtitle is not showing correctly

Dear frds, I am working on 2 hours project which consist of 3 language i.e. English, Russian and Tibetan. Both English and Russian is showing correct while importing in Encore DVD 2 but few of the text which is in Tibetan Subtitle is not showing correctly. I have choosen the font correctly still few of the text is not correct format.
Is there any way to correct my Tibetan language text either by disabling speeling or grammer check or something else ???
Or is there any other way to import the subtitle is Picture format ???
Will be thankful for your kiind help. I stuck my project, please help me...

did you get a solution to this?
We had Encore cs3 and that didn't handle Tibetan well.
Did you use Encore Cs6 to get Tibetan to work ?

Account Balance not showing correctly

Sir,
Suppose , i have posted an invoice of Rs.200 against a customer and after some times i recieved payment from this customer of Rs.200 So, accout balance of this customer should be zero.. But when i see the account balance from business partner master data , it should me Rs.-400 in accout balance field but when i navigate through orange arrow in to accoutn balance details , there i get zero in balance due field?? ie. it is showing coorectly in details of account ballance but in the business partner master data it is not showing correctly??

hi divya,
Check SAP Note 904002 - Customer account balance is displayed with negative sign
Summary
Symptom
Customer Balance is displayed with minus.
Other terms
Customer balance, Supplier Balance, Credit Balance, Debit Balance, Display Credit Balance with Negative Sign, Company Details, System Initialisation, business partner, accounts, SAP Business One
Reason and Prerequisites
Customer balance is displayed in negative though you expect it to be positive.
Solution
Under Administration->System Initialisation->Company Details and the 'Basic Initialisation' tab you will find the setting 'Display Credit Balance with Negative Sign'. This setting decides how Customer and Supplier balances will be displayed.
NOTE!
When creating a company it is important to know that this setting is irreversible once transactions have been made in the company.
When this box IS checked the following applies:
Customer balances will be displayed as Positive.
Supplier balances will be displayed as Negative.
When this box IS NOT checked the following applies:
Customer balances will be displayed as Negative.
Supplier balances will be displayed as Positive.
This setting also influences the entry of opening balances for the G/L accounts. Depending on this setting, the opening balances must be entered as positive or negative numbers.
By default this box is checked when a new company is created.
Header Data
Release Status: Released for Customer
Released on: 02.12.2005 10:42:10
Master Language: English
Priority: Recommendations/additional info
Category: Consulting
Primary Component: SBO-ADM-INI-DET Company Details
Secondary Components: SBO-BP Business Partners
Affected Releases
Release-Independent
Hope it solves problem.
Jeyakanthan

The onhand quantity at sub inventory level it is not showing correctly

For an item the org level quantityt is showing correctly but at sub inventory level it is not showing correctly.
1)For an item org level the avilablty as below :
               On Hand / Avail to Reserve / Avail to Transact are
     oRG level          7     7          7
STAGING           7     7          7
     STORES          0     0          0
2) Created an Sales order with quantity 5 ,then STAGING decreased by 5 which is correct.
          the avilablty as below :
               On Hand / Avail to Reserve / Avail to Transact are
     oRG level          7     7          7
STAGING           2     2          2
     STORES          0     0          0
3) Shipping Transaction not completed,Received 4 into Stores – Staging avail increased by 6 and even STORES also increased by 4 . Here we do not understand why STAGING increased to 6.
     the avilablty as below :
               On Hand / Avail to Reserve / Avail to Transact are
     oRG level          7     7          7
STAGING           6     6          6
     STORES          4     4          4
4)Ship Transaction Completed sucessfully now the values are showing correctly.
     The avilablty as below :
               On Hand / Avail to Reserve / Avail to Transact are
     oRG level          7     7          7
STAGING           2     2          2
     STORES          4     4          4

Hi Patel,
You can create a confirmations using CO11N for sub-operations, but you can only confirm hours, not yield quantity. The yield quantity requried to be confirmed in the operation. You can partially or fully confirm sub-operations.
Enter the order number, sub -operation number all the related data will be displayed execpt greyed quantity fields.
Can you see the "sub-operation" entry field below "oper./activity" in CO11N ?
Thanks & Regards,
Ramagiri

Finder is not showing correct file in cover flow mode. The files shown in the top panel are one file off.

finder is not showing correct file in cover flow mode. The files shown in the top panel are one file off.

This problem occurs after I move a file or files to trash. If I remove one file, then the sequence is one file off, if I move two files to trash then the sequence istwo file off. For example, if I delete file 1 and highlight (click on) file 3, then the cover flow panel shows file 2, when it should show file 3.

PXI-2503 SFP not showing correct COM"X" number?

Similar Messages

Maybe you are looking for