PXI-4070 with PXIe-1062Q+NIe-8360+Labtop Why? Max not found instrument.

Dear all
my condition
PXI-4070 with PXIe-1062Q+NIe-8360+Labtop
Window XP SP3
NI-DMM 3.1
Why? Max not found instrument.
found PCI Device "PXI10:15::INSTR
see picture
How to fix this problem?
Best Regard,
Sermsak.
Attachments:
PXI-4070.jpg ‏42 KB

Hello, 
Is it possible to take another picture of MAX? That one is very pixilated and I can't quite make out the configuration/error. Does the chassis show up? Every now and then MXI compatibility software is needed for certain BIOS versions so this may be the cause. Did the system work ever before?
Thanks,
Eric E.

Similar Messages

  • Hi am trying to save Data into a write to measurement file vi using a NI PXI 1042Q with a real time mode but it is not working but when i run it with uploading it into the PXI it save in to the file

    Hi am trying to save Data into a write to measurement file vi using a NI PXI 1042Q and DAQ NI PXI-6229 with a real time mode but it is not working but when i run it without uploading it into the PXI it save in to the file please find attached my vi
    Attachments:
    PWMs.vi ‏130 KB

     other problem is that the channel DAQmx only works at real time mode not on stand alone vi using Labview 8.2 and Real time 8.2

  • Compilation error - FPGA NI PXI-7951R board - ERROR: Xst: 2472 - Top module Puma15Top was not found.

    I'm trying to compile a "user CLIP socket" for the NI PXI board - 7951R which has a Virtex-5 LX30 FPGA from Xilinx, but I got the bellow message from NI Compiler, this message is in error report Xilinx.log.
    It says that module Puma15Top was not found.
    But this module is a NI property and is automatically compiled by NI Compiler.
    The compiler automatically generates these files (Puma15Top...) that are passed to the compiler of Xilinx. The Puma15Top files are in the path, i.e: C: \ NIFPGA \ compilation \ Told_F_I_CC5DC260 \ source_files.
    This folder name is automatically generated by labview (Told_F_I_CC5DC260) for each different project or compilation.
    So I have no way to configure in CLIP files where it'll be Puma15Top, once the path is automatically generated during compilation by Labview.
    Does anyone have any idea how to solve this problem? Or have you experienced some like this?
    Following error log:
    ### XstSynthesis ###
    Puma15Top
    Reading design: Puma15Top.prj
    =========================================================================
    *                          HDL Compilation                              *
    =========================================================================
    Compiling vhdl file "C:/NIFPGA/jobs/Cm9xA8x_LaF6U1d/CLUC001_Conf.vhd" in Library work.
    Entity <CLUC001_Conf> compiled.
    Entity <CLUC001_Conf> (Architecture <behavioral>) compiled.
    Compiling vhdl file "C:/NIFPGA/jobs/Cm9xA8x_LaF6U1d/CLUC001_CLIP.vhd" in Library work.
    Entity <CLUC001_CLIP> compiled.
    Entity <CLUC001_CLIP> (Architecture <rtl>) compiled.
    Entity <CLUC001_CLIP> (Architecture <behavioral>) compiled.
    ERROR:Xst:2472 - Top module <Puma15Top> was not found.
    ERROR:Xst:2469 - Please specify the correct library via the -work_lib switch.
    -->
    Total memory usage is 149596 kilobytes
    Number of errors   :    2 (   0 filtered)
    Number of warnings :    0 (   0 filtered)
    Number of infos    :    0 (   0 filtered)
    Process "Synthesis" failed
    Thanks in advanced!

    Hi Guilherme,
    Thanks your suggestion, I upgraded NI-RIO to 13.1.1 version but the problem persists, as shown below:
    Project: T_old.lvproj
    Target: F (RIO0, PXI-7951R)
    Build Specification: I_2
    Top level VI: I.vi
    Compiling on local compile server
    Compilation Tool: Xilinx 11.5
    Start Time: 2/9/2014 18:03:51
    Run when loaded to Fpga: FALSE
    JobId: z8Cq8B4
    Working Directory: C:\NIFPGA\compilation\Told_F_I2_F3177096
    Compilation failed due to a Xilinx error.
    Details:
    ERROR:Xst:2472 - Top module <Puma15Top> was not found.
    ERROR:Xst:2469 - Please specify the correct library via the -work_lib switch.
    -->
    Total memory usage is 149596 kilobytes
    Number of errors   :    2 (   0 filtered)
    Number of warnings :    0 (   0 filtered)
    Number of infos    :    0 (   0 filtered)
    Process "Synthesis" failed
    Start Time: 18:03:51
    End Time: 18:05:19
    Total Time: 00:01:27,414
     Best,
    JEMP

  • Problem with Vision Builder and LabView: Error -1074395995, File not found

    I have created an inspection with Vision Builder AI 2009 SP1. In it I load some pictures from the HDD and run some checks over it. It works fine. Then I have migrated it to LabView 2010, I get a message that the migration is successfull, but when I run the VI on LabView I get a fail status. I have been checking my program and I have found and error when I try to load the picture from file: Error -1074395995 occurred at IMAQ ReadImageAndVisionInfo
    Possible reason(s): IMAQ Vision:  File not found.
    But I am not sure which file it refers to. At first I thought it was the picture I wanted to load, but I have checked the path and it is correct, so maybe it refers to another thing. What puzzles me most is that it works perfectly on Vision Builder and I have changed nothing in LabView, maybe it is a problem with the migration. Any clues?

    Here's a screenshot of what I'm talking about. Put a break point here and see what the path is and compare that with what Vision Builder AI is using (described where to find this in the previous post). You could find where this global is used to make debugging easier.
    Hope this helps,
    Brad
    Attachments:
    Generated Code.png ‏43 KB

  • BRARCHIVE fails with BR0017E error message: "off line redo log not found"

    After upgrade, archive format was changed to introduce resetlogs id in archive log file name
    Archive destination            /oracle/GDD/oraarch/GDDarch
    Archive format                 %t_%s_%r.dbf
    NOTE: %s log sequence number, %t thread number, %r resetlogs ID that ensures unique names are constructed for the archived log files across multiple incarnations of the database
    We did have problems with this upgrade so database was recovered once and started with resetlogs (new incarnation created).
    Now when we run brarchive it is trying to archive archive_log_file
    BR0017E Offline redo log file '/oracle/GDD/oraarch/GDDarch1_853_544272161.dbf' not found
    while on archive_log_dest we have files like "/oracle/GDD/oraarch/GDDarch1_853_618656359.dbf"
    Can you please help me to find out from where brarchive is picking parameter for log_archive_format and why it is not picking up current one causing missmatch between archvie_redo_log_file create and one BRARCHIVE is trying to back up.

    I already tried it (renamed archGDD.log to andrija.archGDD.log) and rerun
    brarchive -c -u / -r initGDD.utl.nbkp.bdhp4320 -cs
    it gave me output:
    brarchive -c -u / -r initGDD.utl.nbkp.bdhp4320 -cs
    BR0002I BRARCHIVE 7.00 (14)
    BR0006I Start of offline redo log processing: advfexyn.cps 2007-05-08 08.33.13
    BR0477I Oracle pfile /oracle/GDD/102_64/dbs/initGDD.ora created from spfile /oracle/GDD/102_64/dbs/spfileGDD.ora
    BR0013W No offline redo log files found for processing
    BR0007I End of offline redo log processing: advfexyn.cps 2007-05-08 08.33.15
    BR0280I BRARCHIVE time stamp: 2007-05-08 08.33.15
    BR0004I BRARCHIVE completed successfully with warnings
    and in archGDD.log that is created there is againreference to 0544272161 which seems to be still reference to old resetlog ID:
    bdhp4320:ac8558 41> vi archGDD.log
    "archGDD.log" 4 lines, 322 characters
    GDD  util_file  advfexyn cps  2007-05-08 08.33.13  2007-05-08 08.33.15  9  ...........         0        0        0
         0  -
    7.00 (14)  @0544272161
    GDD  util_file  advfexyn cps  2007-05-08 08.33.13  2007-05-08 08.33.15  1  ...........         0        0        0
         0  -
    7.00 (14)  @0544272161
    and in /oracle/GDD/saparch/advfexyn.cps file there is output like:
    Name                           Value
    oracle_sid                     GDD
    oracle_home                    /oracle/GDD/102_64
    oracle_profile                 /oracle/GDD/102_64/dbs/initGDD.ora
    sapdata_home                   /oracle/GDD
    sap_profile                    /oracle/GDD/102_64/dbs/initGDD.sap
    backup_dev_type                util_file
    util_par_file                  /oracle/GDD/102_64/dbs/initGDD.utl.nbkp.bdhp4320
    system_info                    oragdd/oragdd bdhp4320 HP-UX B.11.11 U 9000/800
    oracle_info                    GDD 10.2.0.2.0 8192 862 2969171885
    sap_info                       640 SAPGDD GDD W1381514715 R3_ORA 0020195637
    make_info                      hp_64 OCI_101 May 27 2006
    command_line                   brarchive -c -u / -r initGDD.utl.nbkp.bdhp4320 -cs
    BR0013W No offline redo log files found for processing
    BR0007I End of offline redo log processing: advfexyn.cps 2007-05-08 08.33.15
    BR0280I BRARCHIVE time stamp: 2007-05-08 08.33.15
    BR0004I BRARCHIVE completed successfully with warnings

  • Problem with connection to SQl Server ( charecter set cp1255 not found )

    Hello my name is Ron ,
    i want to connect to SQL SERVER with the microsoft driver
    from Java ( with jDeveloper ) .
    then i did the following steps:
    1) i download and install the jdbc driver for Sql server
    on my machine ( windows XP with , JDK 1.3 )
    2) i update my classpath with the .Jar lib file of the driver .
    3) when creating the connection
    i'm using the
    Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver");
    this is Ok , the driver was loaded .
    4) when trying the GetConnction
    Connection conn = DriverManager.getConnection
    ("jdbc:microsoft:sqlserver://server1:1433","username","secret");
    i get the following error:
    [Microsoft][SQLServer 2000 Driver for JDBC]Character set CP1255 not found in com.microsoft.util.transliteration.properties.
    please help me with this . any idea ?
    thanks in advance
    Roni

    Ron,
    Try following this document
    http://otn.oracle.com/products/jdev/howtos/bc4j/bc_psqlserverwalkthrough.html
    from the how-tos archive.
    Also, try to change the compiler encoding to UTF-8. you do this in the project setting window.
    http://otn.oracle.com/products/jdev/htdocs/vcmigration/weblogic/unicode.gif
    http://otn.oracle.com/products/jdev/htdocs/vcmigration/weblogic/unicode2.gif
    good luck

  • PXI-5402 IVI in TestStand 4.2 returned "niFgen_InitWithOptions" Resource not found

    Hi, i'm very new in TestStand.
    I hope someone could help me.
    I have a complete Sequence in which an ivi should initiate a PXI-5402.
    (It's an old sequence i inherited. It's now my job to get it working again).
    We have another System with an PXI-5401 (appears in MAX as Traditional-DAQ) which works fine with this Sequence.
    I created a new Sequence to simplify troubleshooting with just the "IVI Fgen" step.
    When in click on "Validate" and uncheck "Simulate" and hit "Init" i get:
    niFgen_InitWithOptions returned an error: -1073807343 (0xbfff0011). Insufficient location information or the requested device or resource is not present in the system. If the resource descriptor is an IVI name, it must match the entry in the IVI Configuration Store in a case sensitive manner.
    Source: TSIviStepTypes [Error Code: -31619]
    In NI-Spy i get following Error
    > Status: 0xBFFF0011 (VI_ERROR_RSRC_NFOUND)
    I think i have configured everything correct. Please see attached Screenshot.
    I tried different IVI-Logical Names...
    To eliminate this as root cause, i reference direct the Driver-Session which is displayed correctly on the iviConfiguration.
    Thanks in advance
    Solved!
    Go to Solution.
    Attachments:
    ivifgen-teststand.jpg ‏482 KB

    Ok, i got it ...
    It's the well known problem with DAQmx-Configuration within MAX.
    Described under:
    http://digital.ni.com/public.nsf/allkb/22CF7E6B27B6995B86256DDB0058F39B
    I had to link Logical-Name with DAQmx-Device instead of PXI-Device.
    Thanks anyway.

  • Can I use Adobe CS4 with Mavericks? I get message: Document Types Not Found

    Not able to open CS4 after moving from 2006 MacBook to newer MacBookPro with Mavericks already installed.

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Trying to set up airport extreme with a dsl modem and get DSN server not found message .   Get a green light on airport but no internet modem and get

    Am attempting to set up a Wi Fi network with an airport extreme.    Get most of the way through the setup  (have a dsl modem) but get an error that it cannot connect to the internet.   Says I have a problem with a DSN server and asks for  what appears to be a series of numbers.    I had an old airport express working for some time and never saw this.  
    Decided to upgrade since the express was not powerful enough to work in the whole house.

    It is always a good idea when changing out networking hardware to perform a complete power recycle of all of your networking gear.
    Please try the following:
    Power-down the modem, AirPort Extreme Base Station (AEBS), and computer(s). Leave them powered-off for at least 10-15 minutes.
    Power-up the modem; wait at least 10-15 minutes to make sure that is has enough time to initialize.
    Power-up (plug into power) the AEBS; wait at least 5-10 minutes or until its status light is a solid green. (Note: The status light may continue to flash amber after this timeframe. This is ok as it may just be letting you know that some additional configuration items need to be taken care of like setting up wireless security.)
    Power-up the computer(s).
    Computers connected to the AEBS by either wire or wireless should now be able to access the Internet. Please post back your results.

  • I can not get to my yahoo email with F4. Everything I click on comes up "Not found. The requested URL /mc/showMessage was not found on this server."

    MF4 doesn't work with yahoo email

    Since something is not being found on the server the problem here is not with Firefox most likely. There may be some type of caching going on here. I would suggest clearing your cache and if the problem persists contacting Yahoo. You can clear your cache by following the instructions found on this page [[How to clear the cache]].

  • Can some one help me with diagnostic test result " apple mobile device driver not found"?

    I bought an iPhone 4gs 32gb from Singapore. iso 4. I'm living in Chennai, India. To connect it to my computer (windows XP,), I have downloaded iTunes 10.6.1.7. Unfortunately iTunes is not recognizing my iPhone.  I had tried to troubleshoot it by reinstalling iTunes (2 times). I have restarted the apple mobile device from control panel. I try connecting my iphone in another usb port. but no use. I don't know what am I missing?.  iTunes opens on my computer. but doesn't recognize my device. when I click on help. it says an "unknown error has occurred. your computer is not connected to internet. please check your internet connection and try again later". I don't know what to do? could you please help me? thank you so much for your help and time.
    when I update the usb driver (C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.Double-click the usbaapl file.) I followed the procedure from this site. http://support.apple.com/kb/TS1538 when I finished, it says "the specified location does not contain information about your software"
    I did the apple's diagnostics test on my computer. I'm pasting the result for your info.
    Microsoft Windows XP Professional Service Pack 3 (Build 2600)
    System manufacturer System Product Name
    iTunes 10.6.3.25
    QuickTime not available
    FairPlay 1.14.43
    Apple Application Support 2.1.9
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 5.2.0.6
    Apple Mobile Device Driver not found.
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 0013AC2C08548378
    Current user is an administrator.
    The current local date and time is 2012-06-28 15:23:45.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    Intel(R) G41 Express Chipset
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:        {D85300A1-330D-41ED-AC5A-EC032B22FBF0}
    Description:            Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller - Packet Scheduler Miniport
    IP Address:             192.168.1.3
    Subnet Mask:          255.255.255.0
    Default Gateway:    192.168.1.1
    DHCP Enabled:      Yes
    DHCP Server:         192.168.1.1
    Lease Obtained:     Thu Jun 28 15:17:19 2012
    Lease Expires:       Fri Jun 29 03:17:19 2012
    DNS Servers:         192.168.1.1
    Active Connection: LAN Connection
    Connected:             Yes
    Online:                    Yes
    Using Modem:        No
    Using LAN:             Yes
    Using Proxy:           No
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was unsuccessful.
    The network connection timed out.
    Basic connection to the store failed.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    The network connection timed out.
    iTunes has never successfully accessed the iTunes Store.
    **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    UpperFilters: GEARAspiWDM (2.2.0.1),
    G: Optiarc DVD RW AD-7220A, Rev 1.01
    Drive is empty.
    **** Device Connectivity Tests ****
    iPodService 10.6.3.25 is currently running.
    iTunesHelper 10.6.3.25 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) N10/ICH7 Family USB Universal Host Controller - 27C8.  Device is working properly.
    Intel(R) N10/ICH7 Family USB Universal Host Controller - 27C9.  Device is working properly.
    Intel(R) N10/ICH7 Family USB Universal Host Controller - 27CA.  Device is working properly.
    Intel(R) N10/ICH7 Family USB Universal Host Controller - 27CB.  Device is working properly.
    Intel(R) N10/ICH7 Family USB2 Enhanced Host Controller - 27CC.  Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.

    I have the same problem. I think that someone tried my iphone before me because when I want to reset it, I'm invited to enter a password that I didn't set. Also, when I go the Map application, the iphone indicate that I'm locateded in China while I'm in Tunisia. Now, I can't connect to my iphone to itunes, and I can't reset it because it ask me to enter a password that I didn't set.
    This is my post:
    https://discussions.apple.com/thread/4063223
    Please, we need your help.

  • Firefox will open a 1Mb PDF file. With 30Mb PDF file Firefox gives error "File not found". Both PDFs from Adobe web site. Using PC with XP-sp3. Firefox 3.6.13

    Option in "Tools/Options/Applications/Adobe Acrobat Document" is set to "use Adobe Acrobat in Firefox". If I change the option to "Use Adobe Reader 9.2 (default)" then the large file gets downloaded and then opens in Reader.
    Any help appreciated.

    I originally posted this nearly 2 months ago. Is no-one else having this problem...???
    I upgraded to Firefox V3.6.16; problem still happening.
    Anyone got any ideas please...???

  • What is going on with Safari?  Getting a lot of site not found errors.

    Why am I getting lots of site not found errors recently on Safari?

    What you describe is not a typical case, but try working through the suggestions here:
    http://www.thesafemac.com/eliminating-browser-redirects-and-advertisements/

  • ACS50001: Relying party with identifier was not found.

    Hi,
    I set up Azure ACS that uses ADFS for single sign on based on the article from Ben Morris below.
    http://www.ben-morris.com/set-up-a-federated-identity-provider-on-azure-using-active-directory-and-adfs-2-0/
    When I try to run my MVC application, it gives the following error. Any help will be highly appreciated.
    An error occurred while processing your request.
    HTTP Error Code:  400 
    Message:  ACS20000: An error occurred while processing a WS-Federation sign-in request. 
    Inner Message:  ACS50001: Relying party with identifier 'https://tftestacs.accesscontrol.windows.net/' was not found. 
    Regards,
    Vinod.

    Greetings, Vinod!
    Here's an article which talks about creating a MVC application using ACS on Azure AD:
    http://azure.microsoft.com/en-in/documentation/articles/active-directory-dotnet-how-to-use-access-control/
    For reference on error codes, please follow:
    https://msdn.microsoft.com/en-us/library/azure/gg185949.aspx
    Thank you,
    Arvind

  • -107418650 error with PXI-4070 even W/O autorange.

    I have a PXI-1033 that includes a PXI-4070 in slot 5. I am using a version of the Switch Scanning with DMM - Handshaking.vi but I changed it to read a fixed scan list and replaced the meter while loop with a fixed read of 144 samples.  After this VI runs approximately 47 times I get this error:
    I have NI-DMM 3.0.4, NI-DAQmx 9.3.0f2 LabView 2101SP1 and am running Vista Business 32 bit. I am using 4 wire resistance and tried both auto and fixed range with the same results. Before this loop the only DMM related functions is to read 4 wire resistance readings and close the DMM. That seems to loop forever without any problems.
    Rebooting dozens of times a day is getting old fast, any ideas?
    Solved!
    Go to Solution.

    Here is the code that causes the error. I can run the Switch Scanning with DMM - Handshaking.VI all day without problems. It's the version I modified that I seem to be unable to fix. The test VI will run from for sometimes as few as 2 loops and hang the system.
    Attachments:
    Scan list and measure.vi ‏48 KB
    Run switch to error.vi ‏15 KB

Maybe you are looking for