PXI-4110 Cards failing since upgrading to Calibratio​n Executive 3.4
Since we upgraded to Calibration Executive 3.4 all of our PXI-4110 Cards have been failing the following:
Calibration
As Found
Channel
As Found DMM Reading
As Left DMM Reading
Test Value
Low Limit
Reading
High Limit
PassFail
2
0.999942
A
0.999942
A
0.25000
A
0.99557
A
0.94065
A
1.00432
A
Failed
2
0.999991
A
0.999991
A
0.50000
A
0.99524
A
0.93736
A
1.00474
A
Failed
2
0.999761
A
0.999761
A
0.75000
A
0.99370
A
0.94076
A
1.00582
A
Failed
This failure occurred on 3 brand new cards and I have even tried the last PXI-4110 before upgrading and it also failed these test and when an adjustment is attempted I receive the following error:
Error -300010 occurred at Get UserField Data.vi
Complete call chain:
cex_UtilityGetUserFieldData.vi
cex_UtilityGetUserFieldDataByIndex.vi
_NI 4110_Get Channel Range and Level.vi
Adjust_NI 4110_Current Out Accuracy.vi
at step Adjust Current Output Accuracy
I am using a Agilent 34401 for the DMM.
JVP
Here are the files you wanted. Sorry this took so long. The hard drive on the computer that we have the Calibration Executive software on died and we had to reinstall everything. So and I tried to run another card with the same results the calibration report I am sending you is from today. I sent the reoprt in two formats XLS and PDF.
Attachments:
ni_support.zip 197 KB
71517 Wednesday, January 11, 2012 8-28-29.xls 49 KB
71517 Wednesday, January 11, 2012 8-28-29.pdf 30 KB
Similar Messages
-
Domain Controller Authentication Fail Since Upgrade
When I boot my Mac Pro at the office, the network's domain controller prompts me for my domain login. Since upgrading to Yosemite, the domain controller rejects my credentials. However, I can go to "Connect To Server" and browser the entire network despite the domain controller not authenticating me as a user.
To summarize, since switching to Yosemite:
1. Can't login to the network when I submit my credentials
2. Can browse the network without my credentials
My theory is that the only reason #2 works is because #1 is working but Yosemite is just mistakenly telling me I wasn't authenticated.
So what's the problem you may ask if I can browse the network anyway? The problem is that I can't mount any of the network drives to my desktop because Yosemite doesn't think I'm authenticated to do such. If I can solve this authentication problem, then I should get my mounted network drives back.
Thanks in advance.Hi,
TEST: Basic (Basc)
Warning: Adapter 00:0D:3A:00:0D:01 has dynamic IP address
(can be a misconfiguration)
Do you have any NIC conifgured to get dynamic IP on your DC which is having issue? If yes, please disable that NIC. Also, please provide me the result of the below
1) On your DC which is having issue, run "ipconfig /all"
2) Repadmin /showrepl
Thanks,
Umesh.S.K
Thanks, there is only 1 nic card. It is getting a dhcp address because this is an AZURE Hyper-v machine and I have set an IP reservation for it. I have no way to hardcode the IP because it gets shut off/on all the time
C:\Users\Administrator>repadmin /showrepl
Repadmin: running command /showrepl against full DC localhost
Default-First-Site-Name\GP2010-A
DSA Options: IS_GC
Site Options: (none)
DSA object GUID: 007c755c-f56c-4e51-a211-fd4431f63927
DSA invocationID: 007c755c-f56c-4e51-a211-fd4431f63927 -
Batch Processing fails since upgrading tree
I've got a customer who has a custom legacy dos executable that runs a
batch file, maps a drive, and sends an attachment to one of their remote
4.11 servers. Until recently, this has worked wonderful for them.
However, in the past week, we have added a 6.5 server to the tree and
before doing so, we had to upgrade all the servers to run DS 6.21.
Since doing this, some (not all) of the runs have stopped working. For
some reason, some of the servers we try to connect to, we're getting an
error now when we attempt to run our batch commands. The error is 89FC
(Can not get connection status) and our map fails, and then our batch
fails. Actually, what happens is is the user we're trying to map with
has no password, but when we run our batch file, it now asks us for a
password for about 5 of the servers we do this with. The other servers
work fine, just these 5 servers no longer work.
We use a very old version of map.exe because our application is memory
bound and this map.exe is 48K.
Any ideas would be appreciated.I am having some of the same problems except the server that is requiring a password (and did not used to) is the master replica. Any ideas? We use this server to store document images and we have a user that we used to connect to through DOS batch files (up until we upgraded the server to NW 6.5/OES sp7). It now requires a password no matter what we do. Even if we have a password on the user login, it gets the following error :
Can not get connection status (89fc)
I cannot find a way around this. Any ideas would be great. -
Sim card locks since upgrading to 1.1.3
since i upgraded firmware to 1.1.3 iPhone locks sim card if no connection 2 provider. Could it be an issue of 1.1.3?
Matthias Stoll,
Locked SIM indicates either a SIM Pin has been set. When a SIM PIN is set, the SIM card will lock and require the PIN to use cell services.
This is a good feature for some situations, but it sounds like it doesn't meet your needs. I would recommend consider disabling the SIM PIN in your situation. Go to Settings -> Phone -> SIM PIN, and turn off the SIM PIN.
If you didn't change the SIM PIN the default SIM PIN varies by carrier and is listed in this article:
http://docs.info.apple.com/article.html?artnum=306230
Hope this helps,
Nathan C. -
IBook Battery Failing Since Upgrade to 10.4.10
I use my iBook heavily for class. I regularly allow the battery to discharge fully before recharging - usually every week or so. Since the last update to 10.4.10 I've noticed the battery seems to be discharging rapidly. Nothing else has changed. I have Applecare and was talked thru resetting the battery (remove battery, hold down power button). I was advised if this didn't fix the problem to go to the Genius Bar. If anything it seems to be worse over the course of a week. I went to the Genius Bar and was told I had to buy a new battery. Now according to the Apple web site the battery should still be at 80% at 300 cycles. Currently I have less than an hour at 290.
Suggestions?You could try resetting the PMU if you haven't already. Otherwise if you aren't covered by the iBook G4 Battery Extension program, your best bet may be to talk to Applecare again and do your best to convince them that your battery is failing prematurely. It is getting a lot of cycles, so this might be a hard case to make. But you never know--sometimes a different person will give you a different answer.
Good luck! -
Facetime fails since upgrading to lion
I've tried everything in the book...calls to Lion or out of Lion to our iphones int the family all fail once picked up...rings fine but will not connect.
This is not the registration or login concerns...
Any suggestions?Check the thread below, there are other with slightly different symptoms that you might want to search for too. Good luck!
John
can not connect to internet after installing lion -
Print menu is different since upgrading to Lion 10.7.4. Pop up menu no longer has Preview and lost paper size selection. Photos are all printing credt card size and I can't get it changed. (Have tried changing in Page Setup.) Have upgraded my printer drivers, but still no luck. Still using iPhoto 6.0.6.
A slow boot time can be caused by login items.
User Login Items:
Flux
NoSleep
ClipMenu
Canon IJ Network Scanner Selector2
BetterTouchTool
USBOverdriveHelper
TotalFinder
Gmail Notifr
Open System Preferences > Users & Groups > Login Items
Remove one login item noted above then restart your Mac to test. It may be one or multiple items causing the slow boot. -
What has happened to the iPad 2 finger select and drag technique?
Since upgrading to iOS7 it does not work?
I used this all the time to select multple images, approx 75 from an SD card containing 1000 images. Its painful indvidually selecting the imagesWhat would you like us to tell you? If it doesn't work, there is nothing that we users can do about it.
Please submit your feature request to Apple at this link: http://www.apple.com/feedback -
SD card cannot be formatted or written to since upgrade to Mountain Lion.
Since upgrading to mountain lion, I cannot format (write) to any of my MS-DOS (FAT 32) formatted SD cards. Prior to the upgrade this was never a problem. Apple Genius bar and calls to support have been no help so far. Can someone here solve this issue ?
Hi and Welcome to the Forums! If by "device", you mean your BB, probably not. If, by "device", you mean the card, then probably yes. You can keep diagnosing by trying other things:
A known-good card in your BB
This potentially bad card in a different card reader
This potentially bad card in a known-good BB (one that for sure can read it's Media Card)
But, given how short a time you've had it, taking it in for evaluation might actually be your best bet.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Since upgrading my Macbook to Lion, the time machine backups are failing - error message: "The backup disk image “/Volumes/Jackie Scanlon's Time Caps/Jacqueline Drabczynska’s MacBook.sparsebundle” could not be accessed (error -1)." I have rebooted the TIme Capsule and it worked OK, but don't want to do that every time. Any suggestions? Thanks
Any new info on this?
I had the exact same problem and went crazy and spent a hecka lot of time trying to deal with my brand new 2TB Time Capsule and almost brand new MacBook Pro. Then I thought I fixed it...and I tried SO MANY things, I don't really know what did it...except taking out any apostrophe's in names of stuff that Apple puts in there...BUT...now it's back.
Grrr... -
Hi I Run Windows 7. Since upgrading to Firefox 4.0 I am unable to "clear history" and get the message "QuickTime failed to initialize". I can delete history when in safe mode with plug-ins disabled. Re-installing quick time fails to resolve the issue. Any ideas or suggestions?
i have that quicktime problem too
-
Sync from iPhone to iCal on MacBook has failed since the latest iPhone upgrade, yesterday. It's worked in reverse, and all other sync operations appear to have worked. Any solutions, that I may not have already tried (over and over)
(Sorry, first time user of these forums, and it's confusing in it's own right)You may have to try deleting all the music from your phone (by going to Settings>General>Usage>Music, swipping All Music and tapping Delete), then sync it all back on with iTunes in order to fix this.
-
ADLink PXI fails after upgrade to Windows 7
Dear all,
Our ADLink 9846 PXI card does not work anymore after upgrading to windows 7.
After a reset of the system the Analog-Digital card sometimes measures one trace, after that it always gives a time out.
I installed all latest drivers and Labview(s), from ADLink (DAQPilot and DAQmaster) and NI, see attached screen shot.
The PXI-GPIB card works well. The ADLink expert says it all works fine in their lab.
What else (besides from downgrading to Windows XP) can I try?
Many thanks in advance for suggestions,
Willem
Attachments:
NImax.png 156 KBI did not mention that the optical link (MXI-4) and the PXI-1031 are National Instruments.
That is why I was hoping someone at the forum might have experience with a similar setup.
regards,
Willem -
Since upgrading to current version I lost my card log in feature
I used to be able to save my usernames and passwords so that I wouldn't have to manually type them in. Why don't I have that since upgrading to current version?
Firefox 4 uses a new build-in home page called about:home
That about:home page only shows some snippets and has a button to restore the previous session if applicable.
If you want a home with extras then set another page as the home page like www<i></i>.google<i></i>.com or www<i></i>.google<i></i>.com/firefox used in Firefox 3 versions. -
Since upgrading my mid-2010 MacBook Pro from the original Snow Leopard to Yosemite 10.10.2 there have been multiple instances of restart (crash) also slow operation & pop up message stating web content has failed. Any suggestions?
Many thanks for your interest, I've downloaded & run the app as suggested, report copies & pasted below.
Problem description:
Following upgrade from Snow Leopard to Yosemite 10.10.2 machine is slower & suffers from shut down / reboot and closing web pages due to unexpected error
EtreCheck version: 2.1.8 (121)
Report generated 6 February 2015 08:40:29 GMT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (15-inch, Mid 2010) (Technical Specifications)
MacBook Pro - model: MacBookPro6,2
1 2.4 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1067 MHz ok
BANK 1/DIMM0
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 75
Video Information: ℹ️
Intel HD Graphics - VRAM: 288 MB
Color LCD 1440 x 900
NVIDIA GeForce GT 330M - VRAM: 256 MB
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: 0:13:14
Disk Information: ℹ️
Hitachi HTS545032B9SA02 disk0 : (320.07 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 318.84 GB (134.68 GB free)
Core Storage: disk0s2 319.21 GB Online
MATSHITADVD-R UJ-898
USB Information: ℹ️
BUFFALO HD-PVU2 500.11 GB
EFI (disk2s1) <not mounted> : 210 MB
Time Machine Backups (disk2s2) /Volumes/Time Machine Backups : 499.76 GB (257.33 GB free)
Apple Internal Memory Card Reader
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] jp.co.buffalo.driver.turbousbhdd (1.0.0) [Click for support]
Launch Agents: ℹ️
[loaded] com.hp.help.tocgenerator.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
Skype UNKNOWN (missing value)
Safari Application (/Applications/Safari.app)
Dropbox Application (/Applications/Dropbox.app)
Android File Transfer Agent Application (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
ConnectService Application (/Library/Application Support/ArcSoft/Connect Service/ConnectService.app)
Internet Plug-ins: ℹ️
Flip4Mac WMV Plugin: Version: 2.4.4.2 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
Google Earth Web Plug-in: Version: 7.1 [Click for support]
Silverlight: Version: 4.0.60129.0 [Click for support]
iPhotoPhotocast: Version: 7.0
User internet Plug-ins: ℹ️
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Click for support]
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Flip4Mac WMV [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 318.84 GB Disk used: 184.16 GB
Destinations:
Time Machine Backups [Local]
Total size: 499.76 GB
Total number of backups: 184
Oldest backup: 2010-12-10 15:37:39 +0000
Last backup: 2015-02-06 02:49:24 +0000
Size of backup disk: Too small
Backup size 499.76 GB < (Disk used 184.16 GB X 3)
Top Processes by CPU: ℹ️
5% WindowServer
1% ConnectService
1% Skype
0% systemstatsd
0% launchd
Top Processes by Memory: ℹ️
193 MB Skype
168 MB mds_stores
132 MB com.apple.WebKit.WebContent
107 MB Mail
99 MB ocspd
Virtual Memory Information: ℹ️
889 MB Free RAM
1.99 GB Active RAM
455 MB Inactive RAM
825 MB Wired RAM
1.11 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Feb 6, 2015, 08:27:32 AM /Library/Logs/DiagnosticReports/com.apple.AmbientDisplayAgent_2015-02-06-082732 _[redacted].crash
Feb 6, 2015, 08:25:19 AM Self test - passed
Feb 5, 2015, 04:37:08 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-05-163708_[redacted].crash
Feb 5, 2015, 10:01:02 AM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-05-100102_[redacted].crash
Feb 5, 2015, 12:03:59 AM /Library/Logs/DiagnosticReports/HP Scan_2015-02-05-000359_[redacted].cpu_resource.diag [Click for details]
Feb 4, 2015, 11:58:58 PM /Library/Logs/DiagnosticReports/HP Scan_2015-02-04-235858_[redacted].cpu_resource.diag [Click for details]
Feb 4, 2015, 11:54:35 PM /Library/Logs/DiagnosticReports/HP Scan_2015-02-04-235435_[redacted].cpu_resource.diag [Click for details]
Feb 4, 2015, 11:49:03 PM /Library/Logs/DiagnosticReports/HP Scan_2015-02-04-234903_[redacted].cpu_resource.diag [Click for details]
Feb 4, 2015, 09:40:16 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-214016_[redacted].crash
Feb 4, 2015, 09:38:12 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-213812_[redacted].crash
Feb 4, 2015, 09:27:56 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-212756_[redacted].crash
Feb 4, 2015, 09:25:25 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-212525_[redacted].crash
Feb 4, 2015, 09:20:16 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-212016_[redacted].crash
Feb 4, 2015, 09:18:10 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-211810_[redacted].crash
Feb 4, 2015, 09:12:54 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-211254_[redacted].crash
Feb 4, 2015, 08:40:48 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-204048_[redacted].crash
Feb 4, 2015, 08:22:04 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-202204_[redacted].crash
Feb 4, 2015, 12:11:35 AM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-001135_[redacted].crash
Feb 3, 2015, 09:44:33 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-03-214433_[redacted].crash
Feb 3, 2015, 05:40:21 PM /Library/Logs/DiagnosticReports/HP Scan_2015-02-03-174021_[redacted].cpu_resource.diag [Click for details]
Feb 3, 2015, 09:05:45 AM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-03-090545_[redacted].crash
Jan 28, 2015, 06:10:42 PM /Library/Logs/DiagnosticReports/Kernel_2015-01-28-181042_[redacted].panic [Click for details]
Jan 21, 2015, 10:51:25 PM /Library/Logs/DiagnosticReports/Kernel_2015-01-21-225125_[redacted].panic [Click for details]
Jan 20, 2015, 11:12:47 AM /Library/Logs/DiagnosticReports/Kernel_2015-01-20-111247_[redacted].panic [Click for details]
Jan 18, 2015, 09:57:31 AM /Library/Logs/DiagnosticReports/Kernel_2015-01-18-095731_[redacted].panic [Click for details]
The only observations are that the backup drive is deemed too small and the quite long list of diagnostic reports dated between Jan 18, 2015 (which I believe is the day I upgraded to Yosemite) & today the latest Yosemite update was installed on Jan 28, 2015
Any further assistance will be appreciated
Maybe you are looking for
-
Nvidia GeForce 8600M GT question
Is anyone running Vista 32 bit using Bootcamp on their SR MBP with the Nvidia GeForce 8600M GT? I ran a vista compatibility scan on the MBP and it said that the card would not work in Vista. I am curious whether this is true or whether others with th
-
Problem showing atf in air 3.4 captativeruntime
Hi, I can't show atf images in my captative runtime version of a game for android, but yes in the non captative runtime version . What can be wrong? It is possible that the air bundled version was not 3.4 version? Edit: NativeApplication.nativeAppli
-
we have a bpel proces which reads a file using file adapter and insert records into DB. my requirement is to schedule the process to run in every 20 mints. I am able to schedule the process using DBMS_SCHEDULER. Now I wanted to schedule the same proc
-
What is the "Backup IP" reboot reason on the Cisco SPA 50x IP phones?
Hi, We have a customer, at a remote site with SPA504G phones, they have a problem with the phones rebooting once in a while, typically once an hour. In the reboot history on the phones the reason is "Backup IP". I cant find any reference to this in t
-
Hide/Disable My Account - BI Publisher Preferences Tab
Hi, Anyone know if its possible to hide/disable the 'BI Publisher Preferences' tab under 'My Acount' in OBIEE 11.1.1.6.0 portal? Rgds