PXI 6711: setting a default analogue output value

Is it possible to set a default voltage for the analogue output of the PXI 6711? I would like to have this default voltage every time I start up my PXI platform and every time there aren't LabView programs that controls those outputs.

Hi,
Unfortunetely, the power on state for the analog outputs of the 6711 is 0V and you are not able to change that. You can make sure that the card is at a set voltage every time LV exits if you put in code that sets the voltage to a specific point every time LabVIEW exits. But, you will be at 0V until LV or another program sets the voltage to something different,
Andrew

Similar Messages

  • How to set a default tabular form value?

    I am trying to set a default value for a tabular form.
    In Tabular Form Element:
    ========================
    Display as: Date Picker
    Formet: Date Picker (DD-MON-RR)
    Default Type: Item (application or page item name)
    Default P2_DATE
    My item P2_DATE is set as:
    ==========================
    Date Picker (DD-MON-RR)
    However when I try to add a row with a default date I get this error:
    report error:
    ORA-01790: expression must have same datatype as corresponding expression
    Any ideas?
    Regards,
    Pawel.

    Sorry for spamming but found a solution:
    which was to change the type into PL/SQL Expression like so:
    to_date(:P301_PROJECT_XFR_DATE,'DD/MM/YYYY')
    This is the format I used in P2_DATE...
    Regards.

  • How do I set the default audio output for all users

    Here's the story. I have a Mac Pro in a classroom that is connected to the audio system via the digital (Toslink) output. The systems are bound to AD and OD with some minor management being performed via MCX (printers, login, etc...)
    When a new user authenticates to the system the output defaults to the internal speakers not the Digital Out.
    My assumption was that I could configure default 0 key in the com.apple.audio.SystemSettings.plist to AppleHDAEngineOutput:1B,0,1,4:2, which is the digital output.
    However it seems that new users are still generated with the Internal Speakers which is AppleHDAEngineOutput:1B,0,1,2:0.
    Is there somewhere else that I can configure that default such that all users will default to the Digital Out, AppleHDAEngineOutput:1B,0,1,4:2? Or am I perhaps not configuring the SystemSettings plist correctly?
    Most of these tasks were previously taken care of by another technician but he has left and I'm quickly trying to pickup the slack for configuration of our Macintosh environment.
    Thanks,
    -alex-

    Best answer I could find: [https://mike.kaply.com/2012/03/16/customizing-firefox-autoconfig-files/#comment-132668]
    If you can figure out how to add the printer name, this can be used to lock the margins.

  • Set default analog output in MAX

    Hi,
    I would like to set a default value (e.g. 10V) to my analog output of my NI6251 card. The current value is (I assume) 0 V.
    Is there a way to change the default value without using labview?
    Many thanks

    I'm pretty sure you can't set the default analog output of a DAQ card to something other than 0V even using LabVIEW.  When the device powers up it will reset and set all outputs to an inert state which is a good thing for safety conserns.  
    I'd recommend you redesign your system so it too uses this standard of using the inert state of a startup condition.  What kind of system do you have that you want the off state to be 10V?
    Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
    If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

  • How to set default sound output

    How do I set the default sound output?  I'm outputting to a USB converter but Mavericks switches to internal speakers on its own with no warning, most times in the middle of a song. Doesn't matter whether I'm using iTunes or a 3rd party music playback app.

    I too have the same setup as you and use my streamer with all of my Apple devices. I've found it necessary to turn off Bluetooth in the devices I don't want to connect to when they are all within range of one another. If you don't need Bluetooth on your Mac turn it off. I've also found that if I'm connected to my Mac and a call comes in to my iPhone that the phone will take priority.
    Mick

  • How to set a default value for a drop down list box and then apply cascading based on the default value in Infopath 2010.

    Hello Everyone
    I have two drop downs. Both are coming from look up fields from two lists. i want to set a default value(first list item) for the first drop down list box and then apply cascading based on the default value for the next drop down list box. I found one article(http://www.bizsupportonline.net/infopath2010/display-first-item-drop-down-list-box-infopath-2010.htm)
    where in i can set a default value but i can't apply cascading based on that default value. Any suggestions would be highly appreciated.
    Thanks
    Ramanjulu Naidu N

    Hey Ramanjulu,
    Take a look at the below article which I believe will answer your question.
    http://basquang.wordpress.com/2010/03/29/cascading-drop-down-list-in-sharepoint-2010-using-infopath-2010/
    Daniel Christian (MCTS)

  • SRM 4.0- How to set the default values for product type (01) only for SC

    The radio button “Service” should not be visible.
    Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
    How to set the default values for product type (01) only for SC
    We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
    Here we can set defalut value 01 but it is not correct one since same search help is using several places.
    We need to limit the search help results only for SC.
    Kindly help out me ASAP.

    The easiest way to set defautl values is to edit the batch class.
    Goto the characteiristic and go to update values.
    In here you probably have something like 0 - 100 as a spec range.
    On the next line enter the default value within this range.  At the end of the line, click in the box in the column labelled "D".  This indicates the defautl value for the characteristic.
    If you need to you can do this in the material classification view as well.
    Just to be clear, these values will only show up in the batch record.  You can not have defautl values in resutls recording screens.
    FF

  • Setting a Default Value in SQL Query Report

    Hello:
    We are using a SQL Query Report to provide a mass update to a table. We are using the apex.collection and having it display a number of records in a SQL Query Report for mass update. We have 14 columns in the report, for which the first 11 are populated via the collection. The remaining 3 are open for input but the individual making the updates. We've were able to provide a default value for 2 of the remaining 3 columns using a named LOV's - however the fourth column we would like to default a sysdate - but we are not successful.
    We've attempted many things but none seem to work, including adding that column to the collection and assigning it a default sysdate value. We've also tried changing the settings in the report attributes --> Tabular Form Elements by setting the Display as to: Datepicker, Default type to PL/SQL Expression and setting the default to sysdate. We've also tried caputuring a date on the previous page and loading it onto the report page and trying to default the date column to a page item default.
    I'd appreciate any help.
    Thanks
    FYI - we are using version 3.2

    use as default
    to_char(sysdate, 'dd/mm/yyy') where the format is your application or item date format

  • How to set the default value of a LOV that is found in a view criteria

    HI,
    I need to set the default value of an LOV that is found in a view criteria. I tried to set a groovy expression but unfortunately it wasn't read. i also tried to bind the LOV to a bind variable and set the value of the bind variable in the constructor of my backing bean but unfortunately the default value appeared the second time i entered the screen and not on page load.
    Can anyone advise where can i set the default value,
    Thanks

    if you want some default value in LOV. you go to edit list of value wizard-> UI hint->include no selection Item checkbox -checked.use labeled item first of list- and beside that put the label. but when you try to get value, it will show null.but you can manipulate in ur java , if it default value

  • How do I set ical default values in lion?

    I have just upgraded to Lion and so far, so good.  In the new iCal, how do I set the default values?  In the old version, when you clicked on the calendar, the default value was a 1 hour meeting around the current time of day.  The new version defaults to an all-day meeting.  I like the old way better, or best would be to have it as a preference. 
    Is there a way to set this that I'm not seeing?

    Mike,
    It sounds to me like you are using the "Month" view for that entry.
    Default event creation in Month view results in an all day event.
    Lion iCal Help (Add events to a calendar) says: "Add a new event in Month view by double-clicking within the day you want the event to appear. Enter a name and time duration for the event in the event’s title field, and then press Return."
    Try entering "Meeting at 9am"...that will create a one hour event named Meeting.

  • Possible to set a default column value to an expression?

    Hi,
    Is it possible to set a default column name to an expression when creating a table?
    For example, I wish to set the default value of a column to read from another table's column and do some arithmetic....is this possible?
    Thanks.

    Yes, you can, with trigger Before Insert for Each row
    But be carefull, you can hit the mutating table problem...

  • How to set a default value in my DropDown using the key  ?

    Hello All,
      Can someone advose how I can achieve the above ? I will like to know how to select a default value for the dropdown by key using the key value instead of description.
      The reason why I need to do so instead o fusing description is because my application will populate the dropdown using web services based on the language selection. Hence, if I were to set the default value using description, den other languages will not work anymore.
      Any help will be greatly appreciated. Thank you !!
    from
    KWok Wei

    Kwok,
    Assuming that:
    1. You have a node NodeX, where attribute TargetAttr defined
    2. You have a DropDownByKey UI control, its property selectedKey bound to NodeX.TargetAttr attribute
    Then:
    Place in your code:
    wdContext.currentNodeXElement().setTargetAttr("yourKey");
    VS
    P.S. This topic was raised several times, and forum search works good enough to find an answer

  • How to set a default value in a form, for a current record.

    Hello,
    I have created a form to store the details of an employee, details include employee id, name and lan id. I am wondering if it's possible to set the default value for an e-mail address. The e-mail address would be in the format '[email protected]'. So If I press 'create', I am directed to a form.
    In the forename field, if i type 'stewart'
    In the surname field, if I type 'Young'
    Then in the e-mail field, I should see '[email protected]'
    Furthermore, if I change 'stewart' to 'stuart', while still in the form, the e-mail address field is automatically updated to '[email protected]'
    Would anyone be able to help with this problem?

    Hi,
    to do this you need kind of interactivity in your form.
    You can achieve this either by:
    1) using JavaScript onchange-events on forename and surname items, or
    2) use the AJAX Computations option of ApexLib, see: http://www.oracle-and-apex.com/ajax-computations-rich-client-feeling/
    brgds,
    Peter
    Blog: http://www.oracle-and-apex.com

  • How to set a default value in a dropdownlistbox

    Hi,
    In CRM 2007 WEBUII have created a dropdownlistbox (ddlb)  filled with currency codes.
    Now I want the default value of the ddlb to be the currency of the country of the loggedin user, ie : 'EUR'
    Anyone an creative idea how I can achieve this ?
    In first place I need to know how I can set a default value of a ddlb.
    --> ddlb type ref to CL_CRM_UIU_DDLB.
    regards,
    Abjuh

    Hello Wolfgang,
    If the method does not exist yet, you can create it in your enhanced (Z) context node.
    Definition:
    ATTRIBUTE_PATH Importing     Type                  STRING
    ITERATOR          Importing           Type Ref To     IF_BOL_BO_COL_ITERATOR
    VALUE                    Returning        Type                  STRING
    Implementation:
    method GET_BP_GROUP.
        DATA: current TYPE REF TO if_bol_bo_property_access.
        DATA: dref    TYPE REF TO data.
        if iterator is bound.
          current = iterator->get_current( ).
        else.
          current = collection_wrapper->get_current( ).
        endif.
      TRY.
        TRY.
            dref = current->get_property( 'BP_GROUP' ). "#EC NOTEXT
          CATCH cx_crm_cic_parameter_error.
        ENDTRY.
        CATCH cx_sy_ref_is_initial cx_sy_move_cast_error
              cx_crm_genil_model_error.
          RETURN.
      ENDTRY.
        IF dref IS NOT BOUND.
          value =''
          RETURN.
        ENDIF.
        TRY.
            value = if_bsp_model_util~convert_to_string( data_ref = dref
                                        attribute_path = attribute_path ).
          CATCH cx_bsp_conv_illegal_ref.
            FIELD-SYMBOLS: <l_data> type DATA.
            assign dref->* to <l_data>.
    *       please implement here some BO specific handler coding
    *       conversion of currency/quantity field failed caused by missing
    *       unit relation
    *       Coding sample:
    *       provide currency, decimals, and reference type
    *       value = cl_bsp_utility=>make_string(
    *                          value = <l_data>
    *                          reference_value = c_currency
    *                          num_decimals = decimals
    *                          reference_type = reference_type
            CONCATENATE <l_data> '-CURR/QUANT CONV FAILED-' INTO value
                        SEPARATED BY space.                 "#EC NOTEXT
          CATCH cx_root.
            value = '-CONVERSION FAILED-'.                  "#EC NOTEXT
        ENDTRY.
        if value is initial.
         value = 'Your default value'.
        endif.
    endmethod.
    Regards,
    Fabian

  • How to set a default value in a Value Help Drop Down List

    Hi,
    I used an age Range field in my adobe form, the control  is a Value Help Drop Down List. i am populating the drop down using following code.
    IWDAttributeInfo ageInfo = wdContext.nodePersonalData().getNodeInfo().getAttribute("CTAgeRange");
         ISimpleTypeModifiable ageType = ageInfo.getModifiableSimpleType();     
         IModifiableSimpleValueSet ageValueSet =  ageType.getSVServices().getModifiableSimpleValueSet();
         ageValueSet.put("1","21-29");
         ageValueSet.put("2","30-34");
         ageValueSet.put("3","35 or Above");
    My requirement is to set a default value e.g. 30-34 in the age range field.
    I want to give input to iform from my Implementation code only.
    Please help.
    Thanks in advance

    hi Ranjan,
    that means you have to set at design time,
    to set default drop down value you will have to set the value for particular attribute (which is linked to the dropdown element) in the context
    like
    wdContext.currentContext<nodeName>Element.set<FieldName>(<default value>)
    This generally done in Initialization method of the controller.

Maybe you are looking for