PXI 8176 Controller Display Blanks Out.

The Monitor goes on standby (blanks out) randomly while my computer is still on. I've narrowed the problem down to the controller. I just want to know what options I have. Is there a part in the controller itself that I can replace?

I face the same problem with PXI 8196. The whole system hangs up but power supply still ok. HD LED also not lights up.

Similar Messages

  • How to use TRG pine in PXI-8176 controller

    Dear All,
            I have Thermocouple data acquisition system. In which there are 2 chassis, (1) PXI 1002 with
    PXI8176 controller with RT, PXI 6071E DAQ card (2) SCXI 1001 with  SCXI 1125 card  and SCXI1327 block.
    PXI 6071E  connected to SCXI 1125 with SH1006868 cable and adapter SCXI1349.
    I am using Labview 8.6 , DAQmx9.0
    I have develop program for continuous thermocouple acquisition. Now i want to make program on trigger based data acquisition.  When trigger pulse comes system starts to acquire data ( and log in file) for userdefine time and stop acquisition. Again when trigger pulse comes   system again starts to acquire and stop at define time.
    There is one TRG pin on  PXI-8176 controller, Can i use that one and how i can use it? Or i have to use separate DIO line for trigger?
    Can you guide me how i can develop such system.
    Thank you.
    --Vishnu
    Solved!
    Go to Solution.

    Thanks Shreyas,
              Once again you help me to solve my problem. 
               As i have already mention you i have develop temperature measurement system with-out trigger. Here i am attaching my project. Now, how i can make it trigger based, means when trigger pulse comes acquisition start and target send data after some time for example 5minutes stop acquisition and restart acquisition again when next trigger pulse comes and so on.
    Thanks
    --Vishnu
    Attachments:
    host_target.zip ‏81 KB

  • My 6070 navigation display blanks out after 5 seco...

    My 6070 navigation display blanks out after 5 seconds. Not enough for a 'silver surfer' I am not able to find the adjustment, and it is not in the handbook. Can anyone help. Many thanks
    Solved!
    Go to Solution.

    A reply from service would indicate this a feature of the 6070, back light being turned off. The time out cannot be altered. This feature is unsatisfactory as it times out too soon for slow fingers!

  • Pxi-8176 controller to read data from an instrument controlled by another controller

    can i use pxi-8176 controller to read instrument data on the gpib bus from an instrument controlled by another pc gpib controller?

    Thanks.
    I understand what you're saying, but I'm also trying to understand why the following is not possible or is not more readily available:... Just as NI IO Trace (NI Spy) listens/eavesdrops to the GPIB real time, one would think that Labview would be able to do it also. One would think that just as NI IO Trace (NI Spy) publishes to a window/file/memory it shouldn't be impossible to publish to a string so that it can be processed real-time by some VI algorithm. If I think about NI IO Trace as a VI, I would think that it is already in a string format before it is published to the NI IO Trace window... why isn't that string available to Labview VIs block diagram?

  • How to configure Intel Pro/100 ethernet in PXI-8176 controller for RedHat Linux kickstart installation?

    I have trouble configuring the Intel Pro/100 ethernet for the PXI-8176 controller during the kickstart installation. Did anyone have better luck?

    Not with Linux but...
    I had trouble setting it up for RT.
    There is an issue with the chipsets used and the firmware of the 8176 when sizing the bus.
    There was a KB article.
    NI support should be able to chase down your details for you.
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Solved: Display blanks out and does not turn on untill reboot.

    Hardware:
    ======
    Intel i7 prossesor (x86)
    Asus motherboard with UEIF
    ATI radeon 5770 graphics
    Partitioneng:
    ========
    sda: windows file system partitions
    sdb1: /boot (FAT32) - GRUB UIEF
    sdb2: / (ext4)
    sdc: windows bootloader and os
    Software:
    =====
    Regular instal acording to Beginers guid and ATI drivers page.
    Graphics drivers are the big free ATI driver package.
    Problem.
    ======
    After a random amount of time, usialy a fiew minutes after the computer starts, the display turns of.
    This happens in the BIOS menu, the live arch tty, arch tty and gnome.
    This does not happen if i boot into windows or a Ubutu live cd.
    When the display blanks out in a tty i am still able to interact with it,  eg: if i blindly type 'reboot[enter]' the stystem reboots, ore 'man[space]ls[up][up]' computer peeps.
    When the display blanks out in Gnome the keyboard gets disabled aswell.
    I am able to ssh into the computer if it blanks out while i am runnig arch.
    When the computer blanks out nothing but a hardware shutdown and restart seams to turn on the dispaly again. doing a reboot comand (while blanked out) thorugh ssh causes the computer to reboot but the display is still disabled after the reboot.
    Atempted fix
    =======
    attempted to run in bash:
      xset s off
      xset -dpms
    no aperent efect.
    Coment
    ======
    It might be some motherbord fiture that blanks out the screen, what is curious though is thet Windows and Ubuntu never blankout, not even temporarely. So there must be somthing that can be done from the OS side.
    Another weird thing is that I would exect it to blank out when the user input is inactive if it was a pawer saving fiture, but it usialy blanks out while i am typing.
    I am grateful for all the help I can get.
    Last edited by pintjuk (2013-12-23 18:42:14)

    okej, found something interesting.
    this is from a more resent blanking
    not sure what it meens though, is it bugs in the video drivers?.
    dec 23 16:49:26 localhost kernel: radeon 0000:01:00.0: GPU lockup CP stall for more than 10000msec
    dec 23 16:49:26 localhost kernel: radeon 0000:01:00.0: GPU lockup (waiting for 0x0000000000002633 last fence id 0x0000000000002632)
    dec 23 16:49:26 localhost kernel: [drm] Disabling audio 0 support
    dec 23 16:49:26 localhost kernel: BUG: unable to handle kernel paging request at ffffc9040bcbcffc
    dec 23 16:49:26 localhost kernel: IP: [<ffffffffa0880b18>] radeon_ring_backup+0xc8/0x160 [radeon]
    dec 23 16:49:26 localhost kernel: PGD 22680f067 PUD 0
    dec 23 16:49:26 localhost kernel: Oops: 0000 [#1] PREEMPT SMP
    dec 23 16:49:26 localhost kernel: Modules linked in: nls_utf8 isofs fuse btusb iTCO_wdt iTCO_vendor_support snd_hda_codec_hdmi snd_hda_codec_realtek x86_pkg_temp_thermal intel_powerclamp co
    dec 23 16:49:26 localhost kernel: ehci_pci xhci_hcd ehci_hcd firewire_ohci scsi_mod firewire_core crc_itu_t usbcore usb_common
    dec 23 16:49:26 localhost kernel: CPU: 2 PID: 297 Comm: Xorg Not tainted 3.12.5-1-ARCH #1
    dec 23 16:49:26 localhost kernel: Hardware name: System manufacturer System Product Name/P8Z68 DELUXE, BIOS 3603 11/09/2012
    dec 23 16:49:26 localhost kernel: task: ffff88000c394e30 ti: ffff88000c118000 task.ti: ffff88000c118000
    dec 23 16:49:26 localhost kernel: RIP: 0010:[<ffffffffa0880b18>] [<ffffffffa0880b18>] radeon_ring_backup+0xc8/0x160 [radeon]
    dec 23 16:49:26 localhost kernel: RSP: 0018:ffff88000c119ca0 EFLAGS: 00010246
    dec 23 16:49:26 localhost kernel: RAX: ffff880211d00000 RBX: ffff88022185d2d0 RCX: 0000000000000000
    dec 23 16:49:26 localhost kernel: RDX: ffffc9000bcbd000 RSI: 0000000000000000 RDI: ffffc9040bcbcffc
    dec 23 16:49:26 localhost kernel: RBP: ffff88000c119cd0 R08: 0000000000031e04 R09: 0000000000000006
    dec 23 16:49:26 localhost kernel: R10: 0000000000000040 R11: 0000000000000000 R12: 00000000ffffffff
    dec 23 16:49:26 localhost kernel: R13: ffff88022185d2a0 R14: 000000000000c781 R15: ffff88000c119d18
    dec 23 16:49:26 localhost kernel: FS: 00007f2dca10b880(0000) GS:ffff88022f280000(0000) knlGS:0000000000000000
    dec 23 16:49:26 localhost kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    dec 23 16:49:26 localhost kernel: CR2: ffffc9040bcbcffc CR3: 000000000c152000 CR4: 00000000000407e0
    dec 23 16:49:26 localhost kernel: Stack:
    dec 23 16:49:26 localhost kernel: ffff88000c119cb8 ffff88022185c000 ffff88022185d2d0 0000000000000000
    dec 23 16:49:26 localhost kernel: 0000000000000000 ffff88000c119d18 ffff88000c119d70 ffffffffa08513d7
    dec 23 16:49:26 localhost kernel: ffff88022185d2d0 000000010c119cf8 ffff88022185ca38 ffff88022185c018
    dec 23 16:49:26 localhost kernel: Call Trace:
    dec 23 16:49:26 localhost kernel: [<ffffffffa08513d7>] radeon_gpu_reset+0xa7/0x240 [radeon]
    dec 23 16:49:26 localhost kernel: [<ffffffff814f221d>] ? ww_mutex_unlock+0x3d/0xa0
    dec 23 16:49:26 localhost kernel: [<ffffffffa087ea5e>] radeon_gem_handle_lockup.part.5+0xe/0x20 [radeon]
    dec 23 16:49:26 localhost kernel: [<ffffffffa087f528>] radeon_gem_wait_idle_ioctl+0x98/0xf0 [radeon]
    dec 23 16:49:26 localhost kernel: [<ffffffffa05dcc62>] drm_ioctl+0x502/0x630 [drm]
    dec 23 16:49:26 localhost kernel: [<ffffffff810725e2>] ? __set_task_blocked+0x32/0x70
    dec 23 16:49:26 localhost kernel: [<ffffffff81074e2c>] ? signal_delivered+0x5c/0x80
    dec 23 16:49:26 localhost kernel: [<ffffffff81074e8c>] ? signal_setup_done+0x3c/0x60
    dec 23 16:49:26 localhost kernel: [<ffffffff8101462a>] ? do_signal+0x19a/0x940
    dec 23 16:49:26 localhost kernel: [<ffffffff8101f7a7>] ? __restore_xstate_sig+0x87/0x640
    dec 23 16:49:26 localhost kernel: [<ffffffff811b7275>] do_vfs_ioctl+0x2e5/0x4d0
    dec 23 16:49:26 localhost kernel: [<ffffffff811b74e1>] SyS_ioctl+0x81/0xa0
    dec 23 16:49:26 localhost kernel: [<ffffffff814fcfed>] system_call_fastpath+0x1a/0x1f
    dec 23 16:49:26 localhost kernel: Code: 48 85 c0 49 89 07 74 7b 41 8d 56 ff 31 c9 4c 8d 04 95 04 00 00 00 eb 06 0f 1f 00 49 8b 07 48 8b 53 08 41 8d 74 24 01 4a 8d 3c a2 <8b> 3f 89 3c 08 23
    dec 23 16:49:26 localhost kernel: RIP [<ffffffffa0880b18>] radeon_ring_backup+0xc8/0x160 [radeon]
    dec 23 16:49:26 localhost kernel: RSP <ffff88000c119ca0>
    dec 23 16:49:26 localhost kernel: CR2: ffffc9040bcbcffc
    dec 23 16:49:26 localhost kernel: ---[ end trace 1a11fa07f6928c93 ]---
    Last edited by pintjuk (2013-12-23 15:59:03)

  • Macbook a1181 display blanks out replaced the lcd inverter still blanking out

    Replaced inverter still blanking out.

    OK--so this is an original MBP. You are in the late 2008-early 2009 section of the forum, so I am going to request that your post be relocated to the original MBP section.
    Have you tried an external display? If you get good graphics on an external, it will be further conformation that the graphics chip is OK.
    I am puzzled as to why the original display worked, but two separate replacements did not. I have heard of the brightness indicator getting stuck all the way to the left, so that the display remains black. Can you see the desktop at all by shining a bright light through the apple? If so, maybe you could go to System preferences>Desktop and see if the slider is stuck, and if so, move it to the right.
    Good luck!

  • Display "blank-out" when using Maya with a GF 7800?

    I have a problem where my LCD display occasionally blinks off for about 5-10 seconds when using Maya with a scene displaying about 100,000 polys. Has anyone else encountered this? This only seems to happen when I am quickly rotating the camera in a grey shaded perspective panel?
    My LCD is a Dell 20" LCD (set at 1600x1200) connected to a Geforce 7800 in a Quad G5 with 4.5GB of ram.
    I have never seen this issue before in Maya (I have been using Maya for years, on other machines), so I suspect it is hardware or driver related?

    OK, have completed several tests. I definately seems that the my Geforce 7800 has problems when running some applications. I wonder if anyone else has encountered this problem?
    The easiest way to cause the display to momentarily shut off is to use Maya in the full screen perspective camera window in shaded mode. Proceed to rapidly move a 20,000 poly model (or greater) both zooming and rotating (the polys need to fill the entire screen and shake the mouse).My display (Dell 20" 2001fp) will blink-off for a few seconds. Of course, this in not "normal" work flow, but I have this issue happening when working normally, it can sometimes take time to occur.
    I have tried the Geforce 6600 (256mb ver) and this does not occur with that video card. I have tried several mice both wired and wireless, plus changed the Energy Saver options for Processor performance (from comments I read on Macintouch.com). The problem is consistent to my Geforce 7800. This problem will also occur in Photoshop CS, by moving images and resizing, but I found it much harder to induce.

  • MacBook Pro/Thunderbolt Monitor blanking out

    I have a MacBook Pro with 2 Thunderbolt monitors.  My system is connected up like this:
    MacBook Pro (running in clamshell mode) -------> Thunderbolt Port on MBP -------> Thunderbolt Display ------> Built in Display Thunderbolt Cable ------>Thunderbolt Display 2.
    I also have a Thunderbolt disk drive attached to a thunderbolt port on the back of display 2. 
    I have a couple of problems every now and then.  At times that second display blanks out for a second.  I have noticed, it is most likely to happen when I put some IO on that thunderbolt disk drive.  It just seems to me like the bandwidth of thunderbolt should be able to handle this.
    Secondly.  Sometimes when I boot up, the system considers that second display as the first which screws up my screens.  I usually have to reboot to get it to work right.  I notice that if I boot up with my MBP open, the system always considers the 2nd monitor in the chain the first display. Seems like it would always default to the first monitor.
    Any help you could provide would be appreciated,
    Rob

    The Thunderbolt drive should be the first device on the chain, with the Displays being the last devices on the chain.
    That should solve both of the problems.
    If not, call back or post in the Apple Thunderbolt Display forum.
    Good luck,
    Clinton

  • Black mackbook a1181 screen blanks out

    My Macbook A1181 Black Edition display blanks out. Replaced lcd inverter.

    And yet some more information:
    I wanted to test something. Namely, was the computer "on" or not? So I inserted a blank DVD. The slot-loading machinery accepted it just fine. However, pushing the "eject" button does nothing.
    The only conclusion I seem to be able to draw is that the computer is still in sleep state (does a sleeping Mac allow DVD's to be inserted? I don't know!). If that is indeed the case, then I have no idea how to wake it up; the power button does nothing (except holding it down until the unit shuts off), and opening/closing the lid has no effect.

  • HT5219 Apple thunderbolt display blacks out and blinks

    Hi,
       I have a macbook pro (2.5GHz Intel core i7, 16GB RAM and 10.8.5) for which I use Apple Thunderbolt display as my extended monitor and almost everyday after connecting my external monitor for 3 or 4 hours, Apple thunderbolt display blacks out and starts blinking or displaying weird colors on every blink.
    To stop it from doing that, I have to disconnect and reconnect my thunderbolt display.
    Is this is universal problem or something wrong with my macbook pro ?

    I've got two 27" Thunderbolt displays hooked up to my Mac Pro. Both displays blank out irregularly multiple times per hour.
    I've exchanged one of the displays for a brand new display and the problem continues.
    I've updated both displays using the firmware update a few months back and the problem continues.
    I'm using separate Thunderbolt cables rather than the built-in cables and the problem continues.
    Bullocks.

  • Blank out Display?

    Hi there!
    When I am listening to music on my notebook, I do not really need the display. So I was currently thinking about turning it off. Is there an easy way to completely blank out the display? I am running a Zepot Znote 6214w with an nvidia7600 with the latest drivers installed.
    thx in advance
    armin

    This does the trick for me. Immediately turns screen back on mouse or key input.
    xset dpms force off

  • I just upgraded to Lion 10.7.2 and it says that it will not support Power PC programs so my 2008 version of Mac Office and Intuit Quickbooks are blanked out.  I need these programs.  How do I proceed?

    I just upgraded to Lion 10.7.2 and it says that it will not support Power PC programs and has blanked out my 2008 version of MS Office for Mac and Intuit's Quickbooks.  How do I proceed to get these programs back?

    Upgrade to newer versions compatible with Lion or downgrade to Snow Leopard:
    Downgrade Lion to Snow Leopard
    1.  Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Quit DU and return to the installer. Install Snow Leopard.
    This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
    If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions.  If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

  • In my Iphone 5, Nothing on my App Store is working its displaying blank (Except for Genius section). I've tried to uninstall and install itunes and all its component but still it doen't fix. Not sure if its problem with apple servers. Someone help please!

    In my Iphone 5, Nothing on my App Store is working,  its displaying blank (Except for Genius section). I've tried to uninstall and install itunes and all its component in my desktop but still it doesn't fix the app store issue. Not sure if its problem with apple servers. Someone help please!

    settigns>itunes and app store to make sure you are signed in.. If  you are, you will see your account name..... anyhow, click your account name, sign out and sign back in
    also go to to settings>general>reset and reset network settings... if that doesnt work settings>general>reset and reset all settings!
    one of those shall work. The last step would be to restore your device (apple.com/support) HT1414

  • When using private browsing to view image results in Safari 5.1.3, only the first two rows of results are visible, the following four or so rows display greyed out place holders, and the safe search button is inoperable. Suggestions?

    When using private browsing to view image results in Safari 5.1.3, only the first two rows of results are visible, the following four or so rows display greyed out place holders, the remainder of the results page is blank, and the safe search button is inoperable. When I turn off private browsing and refresh the page, everything works again.
    Anyone else having this problem?

    I have got the same behaviour after the last Safari Update to 5.1.3. It seems that Safari now handles some scripts in a new way. If you debug the Google Website, you will see, that there is some Javascript Error, that seems to prevent to write into local cache. After some searching I wasn't able to finde a solution for this problem, other then disabling Javascript while private browsing to prevent the script loading. You then are able to use Google with the old layout. The option to disable JavaScript can be found in the Menu "Developer", wich has to be enabled in Safari in the options first.
    In my opinion this is a bug that is now occuring, because Apple changed something in private browsing and that has to be fixed by Google now, to run again. Or we will have to wait for 5.1.4, as you can read online Apple will change and bugfix the javascript engine in that version, perhaps this fixes the problem as well. I hope so!
    If anyone is in the developer program perhaps you could test this with the beta of 5.1.4 and tell us if it works.

Maybe you are looking for