PXI configuration first time

Hi everyone
I was working with RT target ( PXI) and by mistakes we have removed/deleted some folders which I think includes ethernet as well, now we are unbale to communicate with target? what we can do ?
how I set up the device again as everything was preinstalled on device?
thanks
Solved!
Go to Solution.

Hello EricMgNiBh,
Do you happen to know which files you delete? Did you delete these files through ftp? One option is to first verify if you can see the device in Measurement and Automation Explorer, format the Real time target, and reinstall the software. If you are completely unable to communicate with the device and have exhausted any networking troubleshooting steps another option would be to create a Real Time Disk Utility USB Drive from your development machine and format the PXI system. This knowledge base walks through how to create the Real-Time Disk Utility and how to format and reinstall Real Time to the system.
Wear
National Instruments
Product Support Engineer

Similar Messages

BCM System Configurator First Time Logon Issue

Hi Experts,
After creating all Virtual Units successfully on BCM 7.0 SP6 batch 1, I tried to open SC using 32-bit Java and 32-bit IE on a laptop on which the certificate Authority and connection certificates installed..
I used the default credentials written at BCM Basic Installation example which is "BCM.Admin" and "12345678"..
I got error message stating "Error during log on, Check username and password".
I tried to log on with BCMAdmin user credentials with no luck..
I tried to open IA from the web it opened with no issues..
Any ideas??

Hi Agur,
I found "SQL Server does not exist or access denied" error message in Agent Server log file.
I searched for that error and got the following link:
Potential causes of the "SQL Server does not exist or access denied" error message
It states: "SQL Server does not exist or access denied" is a generic Microsoft Data Access Components (MDAC) message that indicates that the computer that is running Microsoft SQL Server cannot be contacted."
So, I tried to run SC from the BCM DB Server itself and it worked.
Now, I believe there is a connection error (eg:access denied) between BCM Database Server and (BCM Application Server and other clients)..
However, I am not able to figure it out...
Any Ideas??
Kindly find below the Complete log file for Agent server:
10:16:47.959 (02876/main) ALW> Started [AgentServer] version [7.0.6.100] in virtual unit [AMER_Administrator] in computer [BCMAPP] with process id [2a96c2d5-e005-4146-8a5c-7c5d2fa10c98]
10:17:19.921 (00588/DBConnectionPoolThread) ERR> Exception in CheckDBConnectivity(). Reason: SQLDriverConnect failed (DIRECTORY/08001/[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied.|DIRECTORY/01000/[Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Connect()).)
10:17:19.921 (01104/DBConnectionPoolThread) ERR> Exception in CheckDBConnectivity(). Reason: SQLDriverConnect failed (OPERATIVE/08001/[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied.|OPERATIVE/01000/[Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Connect()).)
10:17:19.921 (02548/DBConnectionPoolThread) ERR> Exception in CheckDBConnectivity(). Reason: SQLDriverConnect failed (CONFIG/08001/[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied.|CONFIG/01000/[Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Connect()).)
10:17:19.921 (01100/DBConnectionPoolThread) ERR> Exception in CheckDBConnectivity(). Reason: SQLDriverConnect failed (OUTBOUND/08001/[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied.|OUTBOUND/01000/[Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Connect()).)
10:17:19.974 (02876/main          ) ERR> AgentServer: Access control information loading failed...
10:17:38.016 (02876/main          ) ERR> SQLDriverConnect failed (CONFIG/08001/[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied.|CONFIG/01000/[Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Connect()).) : Connected = [false]
10:17:38.016 (02876/main          ) ERR> Database = [CONFIG], SQLState = [08001], errorCode = [17] : [Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied.
10:17:38.016 (02876/main          ) ERR> Database = [CONFIG], SQLState = [01000], errorCode = [53] : [Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Connect()).
10:17:38.016 (02876/main          ) ERR> AgentServer: Failed to load services configuration from database
10:21:13.716 (02876/main          ) ERR> SQLDriverConnect failed (CONFIG/08001/[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied.|CONFIG/01000/[Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Connect()).) : Connected = [false]
10:21:13.716 (02876/main          ) ERR> Database = [CONFIG], SQLState = [08001], errorCode = [17] : [Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied.
10:21:13.716 (02876/main          ) ERR> Database = [CONFIG], SQLState = [01000], errorCode = [53] : [Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Connect()).
10:21:32.709 (03784/main) ALW> Started [AgentServer] version [7.0.6.100] in virtual unit [AMER_Administrator] in computer [BCMAPP] with process id [8feb41e2-3253-4d49-ab08-6b253d2deb9b]
10:21:49.248 (03784/main) ERR> AgentServer: Access control information loading failed...
10:21:51.805 (03232/DBConnectionPoolThread) ERR> Exception in CheckDBConnectivity(). Reason: SQLDriverConnect failed (DIRECTORY/08001/[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied.|DIRECTORY/01000/[Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Connect()).)
10:21:51.806 (03224/DBConnectionPoolThread) ERR> Exception in CheckDBConnectivity(). Reason: SQLDriverConnect failed (CONFIG/08001/[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied.|CONFIG/01000/[Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Connect()).)
10:21:51.806 (03116/DBConnectionPoolThread) ERR> Exception in CheckDBConnectivity(). Reason: SQLDriverConnect failed (OUTBOUND/08001/[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied.|OUTBOUND/01000/[Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Connect()).)
10:21:51.808 (03240/DBConnectionPoolThread) ERR> Exception in CheckDBConnectivity(). Reason: SQLDriverConnect failed (OPERATIVE/08001/[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied.|OPERATIVE/01000/[Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Connect()).)
10:22:05.474 (03784/main          ) ERR> SQLDriverConnect failed (CONFIG/08001/[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied.|CONFIG/01000/[Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Connect()).) : Connected = [false]
10:22:05.474 (03784/main          ) ERR> Database = [CONFIG], SQLState = [08001], errorCode = [17] : [Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied.
10:22:05.474 (03784/main          ) ERR> Database = [CONFIG], SQLState = [01000], errorCode = [53] : [Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Connect()).
10:22:05.474 (03784/main          ) ERR> AgentServer: Failed to load services configuration from database
10:22:23.596 (03784/main          ) ERR> SQLDriverConnect failed (CONFIG/08001/[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied.|CONFIG/01000/[Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Connect()).) : Connected = [false]
10:22:23.596 (03784/main          ) ERR> Database = [CONFIG], SQLState = [08001], errorCode = [17] : [Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied.
10:22:23.596 (03784/main          ) ERR> Database = [CONFIG], SQLState = [01000], errorCode = [53] : [Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Connect()).
10:22:25.339 (03784/main          ) ERR> SQLDriverConnect failed (CONFIG/37000/[Microsoft][ODBC SQL Server Driver][SQL Server]Cannot open database "AMER" requested by the login. The login failed.) : Connected = [false]
10:22:25.339 (03784/main          ) ERR> Database = [CONFIG], SQLState = [37000], errorCode = [4060] : [Microsoft][ODBC SQL Server Driver][SQL Server]Cannot open database "AMER" requested by the login. The login failed.
10:22:27.278 (03784/main          ) ERR> SQLDriverConnect failed (CONFIG/37000/[Microsoft][ODBC SQL Server Driver][SQL Server]Cannot open database "AMER" requested by the login. The login failed.) : Connected = [false]
10:22:27.278 (03784/main          ) ERR> Database = [CONFIG], SQLState = [37000], errorCode = [4060] : [Microsoft][ODBC SQL Server Driver][SQL Server]Cannot open database "AMER" requested by the login. The login failed.
10:22:27.278 (03784/main          ) ERR> AgentServer: Failed to load configuration from database
10:22:27.278 (03784/main          ) ALW> LogManager: Application [AgentServer] version [7.0.6.100] in virtual unit [AMER_Administrator] in computer [BCMAPP] with process id [8feb41e2-3253-4d49-ab08-6b253d2deb9b] since [2014-03-06 10:21:32]
10:22:27.278 (03784/main          ) ALW> LogManager: Audit log = [TODO]
10:22:27.278 (03784/main          ) ALW> LogManager: Audit event mask = [failure, presence, system, ]
10:22:27.278 (03784/main          ) ALW> LogManager: Global log level = warning
10:22:27.278 (03784/main          ) ALW> LogManager: LibIpcThreading log level = inherited
10:22:27.279 (03784/main          ) ALW> LogManager: LibIpc log level = inherited
10:22:27.279 (03784/main          ) ALW> LogManager: BcmApi log level = inherited
10:22:27.279 (03784/main          ) ALW> LogManager: CommonLib log level = inherited
10:22:27.279 (03784/main          ) ALW> LogManager: ObjectManagement log level = inherited
10:22:27.279 (03784/main          ) ALW> LogManager: Security log level = inherited
10:22:27.279 (03784/main          ) ALW> LogManager: Database log level = inherited
10:22:27.279 (03784/main          ) ALW> LogManager: Network log level = inherited
10:22:27.279 (03784/main          ) ALW> AgentServer: Server address     = 192.168.82.131:21018
10:22:27.279 (03784/main          ) ALW> AgentServer: Server peer ID     = [AgentServer:AMER_Administrator]
10:22:27.279 (03784/main          ) ALW> AgentServer: Server certificate = []
10:22:27.279 (03784/main          ) ALW> AgentServer: Agent Server mode = Admin-only
10:22:27.279 (03784/main          ) ALW> AgentServer: Config database    = [Driver=SQL Server;Server=BCMDB\BCM00SQL;Database=AMER;Trusted_Connection=yes;UID=EGYPT\BCMAdmin;]
10:22:27.279 (03784/main          ) ALW> AgentServer: Operative database = [Driver=SQL Server;Server=BCMDB\BCM00SQL;Database=AMER_Operative;Trusted_Connection=yes;UID=EGYPT\BCMAdmin;]
10:22:27.279 (03784/main          ) ALW> AgentServer: Directory database = [Driver=SQL Server;Server=BCMDB\BCM00SQL;Database=AMER_Directory;Trusted_Connection=yes;UID=EGYPT\BCMAdmin;]
10:22:27.279 (03784/main          ) ALW> AgentServer: Outbound database = [Driver=SQL Server;Server=BCMDB\BCM00SQL;Database=AMER_Outbound;Trusted_Connection=yes;UID=EGYPT\BCMAdmin;]
10:22:27.279 (03784/main          ) ALW> AgentServer: Max concurrent sessions       = 0
10:22:27.279 (03784/main          ) ALW> AgentServer: Max concurrent sessions exceed= 0
10:22:27.279 (03784/main          ) ALW> AgentServer: Max service channels per user = 10
10:22:27.279 (03784/main          ) ALW> AgentServer: Change track update interval = 10 seconds
10:22:27.279 (03784/main          ) ALW> XMLServer: Workspace update interval = 0 seconds
10:22:27.279 (03784/main          ) ALW> XMLServer: Delay per channel         = 1 seconds
10:22:27.279 (03784/main          ) ALW> BCMAPIServer: External password encryption certificate = []
10:22:27.279 (03784/main          ) ALW> BCMAPIServer: Session idle timeout = 0 seconds
10:22:27.279 (03784/main          ) ALW> MediaContentServer: Voicemail prompts   = [Prompts\]
10:22:27.279 (03784/main          ) ALW> MediaContentServer: Voicemails          = [VoiceMails\]
10:22:27.279 (03784/main          ) ALW> MediaContentServer: Recordings          = [Recordings\]
10:22:27.279 (03784/main          ) ALW> MediaContentServer: Voicemail greetings = [VoiceMailGreetings\]
10:22:27.279 (03412/AgentServer   ) ALW> ASApp: Agent server running in ACTIVE mode...
10:22:29.060 (03700/Hac           ) ALW> ASApp: Agent Server stopping (HAC)...
10:22:30.287 (03412/AgentServer   ) ALW> ASApp: Agent server closed
10:22:31.062 (03784/main          ) ALW> Watchdog: Application instance stopped
10:24:42.310 (04836/main) ALW> Started [AgentServer] version [7.0.6.100] in virtual unit [AMER_Administrator] in computer [BCMAPP] with process id [e80d24c6-d238-40f8-87c7-404858b453d7]
10:24:47.608 (04836/main) ALW> LogManager: Application [AgentServer] version [7.0.6.100] in virtual unit [AMER_Administrator] in computer [BCMAPP] with process id [e80d24c6-d238-40f8-87c7-404858b453d7] since [2014-03-06 10:24:42]
10:24:47.608 (04836/main) ALW> LogManager: Audit log = [TODO]
10:24:47.608 (04836/main) ALW> LogManager: Audit event mask = [failure, presence, system, ]
10:24:47.608 (04836/main) ALW> LogManager: Global log level = warning
10:24:47.608 (04836/main) ALW> LogManager: LibIpcThreading log level = inherited
10:24:47.608 (04836/main) ALW> LogManager: LibIpc log level = inherited
10:24:47.608 (04836/main) ALW> LogManager: BcmApi log level = inherited
10:24:47.608 (04836/main) ALW> LogManager: CommonLib log level = inherited
10:24:47.608 (04836/main) ALW> LogManager: ObjectManagement log level = inherited
10:24:47.608 (04836/main) ALW> LogManager: Security log level = inherited
10:24:47.608 (04836/main) ALW> LogManager: Database log level = inherited
10:24:47.608 (04836/main) ALW> LogManager: Network log level = inherited
10:24:47.608 (04836/main) ALW> AgentServer: Server address     = 192.168.82.131:21018
10:24:47.608 (04836/main) ALW> AgentServer: Server peer ID     = [AgentServer:AMER_Administrator]
10:24:47.608 (04836/main) ALW> AgentServer: Server certificate = [INT&BCM-CA&HKLM/My]
10:24:47.608 (04836/main) ALW> AgentServer: Agent Server mode = Admin-only
10:24:47.608 (04836/main) ALW> AgentServer: Config database    = [Driver=SQL Server;Server=BCMDB\BCM00SQL;Database=AMER;Trusted_Connection=yes;UID=EGYPT\BCMAdmin;]
10:24:47.608 (04836/main) ALW> AgentServer: Operative database = [Driver=SQL Server;Server=BCMDB\BCM00SQL;Database=AMER_Operative;Trusted_Connection=yes;UID=EGYPT\BCMAdmin;]
10:24:47.608 (04836/main) ALW> AgentServer: Directory database = [Driver=SQL Server;Server=BCMDB\BCM00SQL;Database=AMER_Directory;Trusted_Connection=yes;UID=EGYPT\BCMAdmin;]
10:24:47.608 (04836/main) ALW> AgentServer: Outbound database = [Driver=SQL Server;Server=BCMDB\BCM00SQL;Database=AMER_Outbound;Trusted_Connection=yes;UID=EGYPT\BCMAdmin;]
10:24:47.608 (04836/main) ALW> AgentServer: Max concurrent sessions       = 0
10:24:47.608 (04836/main) ALW> AgentServer: Max concurrent sessions exceed= 0
10:24:47.608 (04836/main) ALW> AgentServer: Max service channels per user = 10
10:24:47.608 (04836/main) ALW> AgentServer: Change track update interval = 10 seconds
10:24:47.608 (04836/main) ALW> XMLServer: Workspace update interval = 600 seconds
10:24:47.608 (04836/main) ALW> XMLServer: Delay per channel         = 1 seconds
10:24:47.608 (04836/main) ALW> BCMAPIServer: External password encryption certificate = []
10:24:47.608 (04836/main) ALW> BCMAPIServer: Session idle timeout = 10800 seconds
10:24:47.608 (04836/main) ALW> MediaContentServer: Voicemail prompts   = [\\XXX\prompts\]
10:24:47.608 (04836/main) ALW> MediaContentServer: Voicemails          = [\\XXX\prompts\]
10:24:47.608 (04836/main) ALW> MediaContentServer: Recordings          = [\\XXX\REC\]
10:24:47.608 (04836/main) ALW> MediaContentServer: Voicemail greetings = [\\XXX\prompts\]
10:24:47.610 (03980/AgentServer) ALW> ASApp: Agent server running in ACTIVE mode...
10:16:47.959 SYSTEM> Started [AgentServer] version [7.0.6.100] in virtual unit [AMER_Administrator] in computer [BCMAPP] with process id [2a96c2d5-e005-4146-8a5c-7c5d2fa10c98]
10:21:32.709 SYSTEM> Started [AgentServer] version [7.0.6.100] in virtual unit [AMER_Administrator] in computer [BCMAPP] with process id [8feb41e2-3253-4d49-ab08-6b253d2deb9b]
10:22:31.062 SYSTEM> Application stopped
10:24:42.310 SYSTEM> Started [AgentServer] version [7.0.6.100] in virtual unit [AMER_Administrator] in computer [BCMAPP] with process id [e80d24c6-d238-40f8-87c7-404858b453d7]
10:24:47.803 SYSTEM> Session opened with peer [Cos:AMER_AdminFrontEnd]
10:24:47.845 SYSTEM> Session opened with peer [Cos:AMER_AgentFrontEnd]
10:24:47.956 SYSTEM> Session opened with peer [ChatServer:AMER_Administrator]
10:24:48.930 SYSTEM> Session opened with peer [Etc:AMER_Agents]
10:25:08.351 SYSTEM> Session opened with peer [Cem:AMER_Core]

How do i set up/configure time machine and my first time capsule ?

I want to set up my time machine. When I click at the top of my toolbar it says time machine not configured.
When I turn time machine on through system preferences/time machine - it then prompts me to set up my first time capsule.
When I press 'select back up disk' it prompts me to a page where I cannot 'use disk' I can only click on cancel or 'other time capsule'.
When I click on 'other time capsule' I get taken to a screen with a globe on it and although it says 'internet connected' it also says 'no airport base stations have been found'.
How do I do up time machine/set up my first time capsule ?

See KB Articles;
http://support.apple.com/kb/HT1427
http://support.apple.com/kb/VI29 (video)

First time configuring Sol9 built-in SunONE Directory Server

Hi!
I'm using Solaris 9 Sparc and I'm trying to configure the SunONE Directory Server included with Sol9.
When I type :
directoryserver startconsole , it asks for :
UserID
Password
Administration URL
but how can I specify these info if it's a first time configuration ?

Because I have it on a Netra T1 AC200 without video card and I can't find the Directoryserver binary...

Doubt on first time configuration

good eve everyone,
sir this is the first time i installed times ten on windows 7.after installing i done config by going to administrative tools->ODBC then i created the imdb name and the database character set as same as my oracle set and under first connection tab i configured permanent data size as 40 ,temporary data size as 32,replication parallelism buffer MB as 64 and under IMDB cache tab i named the oracle net service as orcl_db then i went to ttisql then this follows
C:\>ttdaemonadmin -start
System error 5 has occurred.
Access is denied.can any one help me...
thanking you,
prakash

ChrisJenkins wrote:
So can you now start the daemon with ttDaemonAdmin -start? Can you conform that it is running with 'ttStatus'?
This forum is not really the vehicle to provide detailed tutorials. To understand how to get started with TimesTen you need to invest a little time to (a) read some of the documentation and (b) follow the various 'how to' tutorials included in the TimesTen QuickStart. The documentation and the QuickStart are installed automatically when you install TimesTen on Windows.
Regards,
Christhank you for showing me where the vehicle is.now i got the fantastic vehicle .as,im in race need your help in the pitstops.
i hope u will help me....
i finally found that the log directory is missing after installation.then i reinstalled the ttdb and confirmed that the log directory is available this time.
then i connected using
Command> connect "dsn=my_ttdb";
Connection successful: DSN=my_ttdb;UID=oomsys;DataStore=C:\TimesTen\DataStorePat
h\my_ttdb;DatabaseCharacterSet=AL32UTF8;ConnectionCharacterSet=US7ASCII;DRIVER=C
:\TimesTen\TT1122~1\bin\ttdv1122.dll;LogDir=C:\TimesTen\logs;PermSize=40;TempSiz
e=32;TypeMode=0;OracleNetServiceName=XE;
(Default setting AutoCommit=1)thank you chris :)
Edited by: Prakash T Soundappan on Jun 7, 2013 7:00 PM
Edited by: Prakash T Soundappan on Jun 7, 2013 7:00 PM

Computer keeps Configuring and setting up for first time use

I have a toshiba A505-S6980 that has been working fine for a couple years. Recently I had performance issues and suspected virus, spyware so I did a recovery with the original discs I made when I first got the computer. Four of the six discs reloaded fine. It did not ask for the last two discs "Environment 64 bit and Applications and Drives. I also have a System Repair disc. After loading the four recovery discs the computer now keeps recycling between preparing for first time use, configuring system, reboot and then back to preparing for first time use,etc. I think I'm close to getting this, but need a last bit of help.
Thanks

It's been a couple days since you posted this problem. Did you get anywhere, or are you still stuck in that loop? If it's still stuck, you may just want to perform the recovery again.
- Peter

Configuring Environment for first time

Each time I start of SQL Server Management Studio, I get the following message "Microsoft SQL Server Management Studio configuring environment for first time".
I had a simiiliar message with Visual Studio 2005 and fixed it by setting the setting to look on local disk drive. I cannot find a similiar setting in SQL Server 2005.
Any suggestions on how to resolve?

Anybody still want this answered?
Thanks!
Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

SQL Server Management Studio - Configuring the environment for first time use

Hi
I have recently switched my local 'My Documents' folder location to a network drive that I 'make available off line' to allow on-line/off-line work and synchronisation when I am working in and out of the office.
When I load my SQL Server Management Studio 2005 I frequently get 'Microsoft SQL Server Management Studio is configuring the environment for first time use'.
Management Studio them loads and I can continue without problem.
I am guessing it is trying to make reference to some settings file. Any ideas? I wonder if I can change/move these settings elsewhere to a local drive?
Thanks

Hi,
There is bug report of this issue:
http://connect.microsoft.com/SQLServer/feedback/details/126364/configuring-enviroment-for-the-first-time-every-time-in-ms-sql-server-management-express
"SQL Server Management Studio Express saves the settings for the user in ...\Documents and Settings\<User Profile>\Local Settings\Application Data\Microsoft\Microsoft SQL Server\90\Tools\ShellSEM
and in ...\Documents and Settings\<user profile>\Application Data\Microsoft\Microsoft SQL Server\90\Tools\ShellSEM
if any of these files are not available or unusable, SSMSE will generate new ones."
Hope this helps.
BR,
JoukoK

First time update windows 8 is fine after second time i get failure message to configuring

my tablet pc is ativ smart pc pro. first time I wanted to updat my tablet bios it stuck and i turn it off after that i reinstall windows everything was fine first time i update my windows and its done but for second time it shows me that " failure
update configuring, reverting changes" I dont know what to do. I restore my system to first day but again give me same error. last time i just restore windows and didnt install any program and start to update again i get same problem.

Hi,
For your problem, firstly, I would like to suggest you contact Samsung to verify whether the BIOS upgrade would effect system ，
Secondly, if updates configuration failed, can you access into system? if so, please check which updates configure failed.
Thirdly, you can check WindowsUpdates log and CBS log to find the reason of this problem. if you had difficult to analyze these log, you can provide them to us.
C:\Windows\WindowsUpdate.log
C:\Windows\Logs\CBS\CBS.log
Roger Lu
TechNet Community Support

After downloading updates for the first time, i was asked to restart my mac. it starting writing configuring installation. the staus bar just showed a little and remained like that for more than 3 hrs. i tried several times wit no success.

after downloading updates for the first time, i was asked to restart my mac. it started writing configuring installation. the staus bar just showed a little and remained like that for more than 3 hrs. i tried several times wit no success. it has not updated my mac OS X 10.5.

My clean install worked out alright, although I don't think it really fixed anything, rather gave me a couple more days of use 'till I have to send it in. Someone please help my get it running properly again...

Music Centre encountered a problem whilst configuring for the first time ref x912

Music Station, pre loaded on my HP pavillion g6, encountered a problem when trying to register my account/configuring for the first time and gave a referemce as X912 recommending I contact customer support. Please direct me to the site where I may remedy this

Do the following articles help at all?
Trouble installing iTunes or QuickTime for Windows
iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues

Configure NWBC for the first time

Hi,
I tried to configure NWBC for the first time and i am having problem at the login configuration on the URL. I am not sure what is the correct URL i should put here. I followed the guide on http://help.sap.com/saphelp_nw70ehp2ru/helpdata/en/31/8dd113b8ba4832aeaafb4b756e1eed/frameset.htm and read through sap note 900000 but still cannot get this URL resolve.
If can, please provide me step by step on how to obtain the information on the URL syntax as provided the in the configuration guide
http(s)://<server>.<domain>.<ext>:<port>/<path>
Thank you

Hi,
The URL should ideally be:
http://<fully qualified host name>:<http port>/sap/bc/nwbc/nwbc_launch.
But if you run the transaction 'nwbc' from the SAPGui, that should automatically open up this link. What is the error you get while opening this link?
To find the fully qualified domain name and http port details:
- goto tcode smicm
- click services icon or shift+f1, here http port number is shown
- goto -> parameters -> display -> check icm/host_name_full, here the fqdn is shown
Regards,
Srikishan

HT2500 mail starts like the first time asking to configure account

After restarting mya mac book when it froze ... I opened Mail and started as if I was using it for the first time, asking to configure email accounts.
Is there a way to get back all my accounts and emails?

Check & see how many Users accounts are in the Users folder at root of the drive, perhaps your home folder got renamed?
Return to default desktop, apparent "loss" of home directory, (it can happen spontaneously too)...
http://docs.info.apple.com/article.html?artnum=107854

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
When Charter Tech goes to your site, have them connect the modem up, but do not connect the modem to your iMAC or MacBook Pro. What you want to do is connect the Airport Extreme to the iMac or MacBook Pro first with the Ethernet Cable. You have to do this to configure via Airport Utility to set up the Base Station Name & Base Station Password.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple Tv, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.
WHAT TO DO IF YOUR AIRPORT EXTREME WAS PREVIOUSLY SET UP FOR USE WITH ANOTHER CARRIERS ROUTER OR MODEM.
NOTE: If you already had your Airport Extreme connected for example, I previously had ATT Uverse and the Airport Extreme was connected to the Wireless Router Model 3801HGV, I disabled the Uverse Wireless and used the Airport Extreme for the Wireless signal in bridge mode, as the Airport extreme Signal is much stronger than the Uverse router, and I was able to obtain a Wireless signal with the Airport Extreme way much better with no signal loss which was very very frustrating with the Uverse router.
Anyhow if you had it hooked up like this, now that you will be using it with the Charter ARRIS Modem TM902A, you will need to reset the Airport Extreme to clear out the old data it has in memory, with the previous set up otherwise it will not work. Trust me I spent 6 hours trying to make it work reading all Apple Support Community questions and answers relating to this type issue/problem others have been having trying to get their set up working. I tried all the tips, and I finally decided just to see if by chance I would be able to connect with someone with Charter Tech support who might be familiar with Apple to be able to assist me and by luck I did. He told me why it was not working and was all due the previous configuration with the ATT Uverse router was still in memory with the Airport Extreme. Finally it was 10:30 PM when I decided to call Charter Tech Support and I had been working on this since 3:00 pm pacific. I did not call them earlier as all the post I read said they never received any good help from Charter. After calling them I finished up by 11:00 PM and was able to finally connect Apple Tv, iMac, iPhones and Macbook Pro. We love our Apple Product and Happy all is connected with the new
Internet Provider Charter. I must say the speed is way way much better than it ever was with AT&T Uverse.
THIS IS WHAT YOU WILL NEED TO DO:
First you will need to unplug the Airport Extreme, then by taking the tip of a pen or paper clip end you need to push the reset button on the back of the Airport Extreme and hold it
down and at the same time plug the power cord back into the Airport Extreme count to 5 or 10 then release the reset button. Then once he light in front of the Airport Extreme stops blinking you need to plug the Ethernet cable from the Airport Extreme to your iMAC or Macbook Pro, and restart which ever one you have, then open the Airport Utility once it is back up. If you see airport extreme pop up with the old network name or it shows and yellow triangle click on the Airport Extreme ICON it will not let you configure it but will ask if you want to get rid of it or remove and just do it. Then Again restart your iMAC or MacBook Pro, open up Airport Utility again, and on the top left you should see under “Other Airport Base Stations” the MAC ID for the Airport Extreme.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple TV, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.

I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
I have a Linksys WRT320N I used for the initial Charter setup.
I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
Hasn't caused any issues so far but one thing I did notice.
On the Linksys there were 3 DNS servers listed.
The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
I tried everything above, but light on modem still flashes yellow.
I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO.

Trials and Tribulations of a First Time MSI Builder

I'll try to keep this short and sweet (IMPOSSIBLE!), but hopefully this may make sense to some of you out there who have sought and found solice here on the MSI boards....
First off....I'm a first-time MSI MB user.....my system specs are as follows:
Voyeurmods Verge X case
MGE Vigor 500 PS
Athlon 64 2800
MSI K8T Neo FSRII
1 gig Kingston 400DDR (KVR400X64)
1- 80 gig Barracuda SATA
Thermalright SLK948U and TT UFO fan
Aopen DVD/CDR combo drive
TT Hardcano 12
Enermax 6 fan controller
Asus 9800xt
Audigy Platinum
and assorted other fans, belts, and whistles......
Now...the story and the point behind this post:
I have only built one other comp....2.4 Pentium Platform......nice, stable rig.....a few extra goodies to qualify it as a "semi-mod"...but it was a great system to cut my teeth on, and in all fairness, I had a lot of extra help with cables/bios/cpu install, etc. I wouldnt call it a "from-scratch" set up...Never one to NOT jump into the deep end of the pool, I decided to move up a bit and try a new build from scratch....I wanted a decent rig...strictly gaming......as close to state of the art as my budget would allow, but I was prepared to make exceptions......
My original MB of choice once I settled on an Athlon 64 was the Abit KV8. It was a great-looking MB; I thought the OATES cooling system was a significant upgrade from a lot of others...and I liked their "UGURU" system management tool...unfortunately, the Abit MB is now sitting in a trash bin....I have to say that, all emotion aside, Abit wont be seeing my cash any time in the future.....to call the OATES system a total failure would be an understatement...only AFTER I started reading the Abit boards did I realize that virtually every builder was removing the plastic OATES shroud and tossing it away.......the screw alignment in the OATES portion of the board, coupled with almost any aftermarket HS/fan alignment warps the board slightly and doesnt allow multiple sticks of memory to sit properly in the slots......if you folks think thats a joke, just check out the Abit forums.....I'd say that right now, the negative reviews of the KV8 boards are surpassing the "positive" reviews by a ratio of 2 or 3 to 1. And then try RMA'ing the board once its warped!
Now granted, the Thermalright SLK puts a hell of a stress load on the CPU section of the MB through sheer weight alone, but the MSI board, TO ME, seems to be a bit "beefier"....a tad thicker in construction. I dunno...maybe its the layout, or weight distribution. But I digress and this was "supposed" to be short and sweet....
Many hours of bareboning the build with the Abit board resulted in me switching manufacturers and trying MSI. Everything I tried....all the tech support....all the forums and Abit messageboards.....litterally swapping out every piece of equipment....nothing got that Abit board to boot up. I was getting error messages that werent even acknowledged by the manufacturer! Folks, you have NO idea how much better a product MSI is putting out compared to Abit.
For starters.....the board sits damned near perfectly on the standoffs.....one does NOT have to remove the video card to get at the memory slots (the Abit board requires MOST if not all video cards to be removed if swapping memory in slot 1)...the layout of the SATA and IDE brackets seemed a bit more ergonamically proficient on the MSI board.....about the only thing that appealed to me (initially)more on the Abit board was an "on board" LCD error check system that seemed to be a bit easier to use than the MSI D Bracket system. I say "seemed to be", but again, going back to basic board layout and design, the LCD's are virtually covered by the IDE cables that have to sit over the LCD's because of their close proximity to each other. Nice idea. Poorly executed.
So....if any of you first-timers have concerns about choosing the MSI board, start breathing easier.....once I switched boards, and used the exact same components as my first try with the Abit board, the K8T Neo started up first time out of the box.....everything about this board (knock wood), so far, has been great, and I also have to say that the help that all of you here dish out has made this experience nothing short of amazing.
Jocko, whoever the hell you are, you are my new Obi Wan Kenobi! Your advice in a few threads to newbies like myself was so damned "dead-on" ....so accurate...its like you know these boards and systems from the circuit on up! And I have to thank you right now for helping me even though we never exchanged emails or posts......many, many, many thanks!
Also, Mike...your thread for first-timers......it should be part of the itinerary for ALL newbies. Thanks for taking the time to share....
Finally...some additional thoughts that may help others ( or may not):
1. Configuring the BIOS is, to me anyway, always a bit scary. I like pointing and clicking...I hate pressing enter and using arrow keys...there are just too many damned choices and I'll always wonder if I made the right ones......scan back a few threads and search out any of Jocko's advice regarding the initial load of Windows and SATA drives...he makes this part easy. Also, there are several websites that give advice on optimum BIOS configs....you can find many links here on these forums.
2. If any of you want custom modded cases at decent pricing, dont be afraid to use Voyeurmods. Everything about Brian and his crew is top notch.....the customer service....the shipping.....the Verge X case is simply perfection.....I cant say enough nice things about them.
3. Kingston memory can be purchased directly from their USA website at fairly discounted pricing from just about anyone else on the web.....I paid $139.00 for 2 512 sticks of 400 DDR(not per stick...$139.00 total) a while back...pricing changes weekly so if you like Kingston product, check them weekly for specials...so far it has worked perfectly in my rig, and because you are buying direct, the warranty is as good as it gets.
4. The Thermalright SLK 948 is one hell of a heatsink, and the TT UFO fan that sits on top of it makes for one nice combo! My CPU refuses to overheat under load, and I cant say enough about how easy it was to install on the board. If any of you want a superb aftermarket product this does the trick nicely.
5. Any idea why the 2 power slots on the MSI MB are on opposite sides of the board? That was the one glitch I found on these boards that Abit did right...place the 2 power connections side by side for better cable management.
6. If on the first power up the entire system stays dark, chances are it AINT a bad Power supply...more than likely its front panel headers in the wrong slots..check your wiring. If there is just a slight glimpse of power and it cuts out immediately, its almost assuredly wrong wiring....the PS is shorting itself out.
7. On the HOT topic of power supplies....my MGE has 20 amps on the 12 volt line...I know, I know....its barely adequate to some of you....but I have to say this in as nice a way as possible: folks, it AINT always the power supply when a problem develops. I have read countless.....COUNTLESS posts/threads on both Board forums where a problem is "diagnosed" as being a crappy power supply. Some folks wont even discuss any other issue until a different PS is installed. The sad/funny thing is....if you read back through the threads here, as well as the Abit boards, I'd say 90% of the solutions to the problems didnt end up being the PS at all! Its more like: 30% user error....20% memory...10% CMOS clearing....20% component failure(including MB)....10% CPU seating.....10% PS.
8. Do....regardless of how much extra work is involved here....DO utilize a barebones build BEFORE you install in the case and hook up all the peripherals.....it cuts out SO many potential problems before they happen, and just makes so damned much sense. I know its extra effort, but if youre a first timer, and you want that first boot to take place; you want that main screen once you press "DELETE", this is the way to go.
9. Clearing CMOS. LOL! Yup......oh the errors of first- timers like myself!!!!!! Dont even bother posting here until you make sure you cleared the CMOS properly, and if youre not sure how, dont be afraid to ask stupid questions like I did here.
10. Dont be afraid to use cardboard as your anti-static material under a barebones...it works well...costs nothing...and your only potential issue is heat build up if your CPU freaks out.
11. DONT overuse your Artic Silver 5 on the CPU.....forget all the advice about "spreading out evenly" a thin layer of silver all over the CPU cover.....use the "grain of rice" method in the center.....a very small amount spreads out like you cant imagine! After I removed the HS from the CPU on the Abit board, I couldnt believe how thoroughly well the paste had spread over the CPU cover. If I had used more, or spread it out, the TR SLK would have forced it well over the sides of the CPU.
12. DONT be afraid of the BIOS. The MSI manual actually does a pretty decent job of guiding one through the initial set up, and YES...do NOT forget to press F10 to save all your changes.....it took me a couple of tries to make sure the changes "took".
13. DONT panic if you miss the F6 move on Windows install for SATA drivers.....it seems that on XP home, pressing F6 when prompted to made no difference.....30 seconds later the "add 3rd party drivers" screen comes up anyway.....for reference sake, my total Windows XP install took 16 minutes from start to finish.
14. Loading the VIA SATA drivers at that point in Windows is tricky for one very simple reason: the floppy doesnt have any "scroll down" arrows for multiple driver install. They are hidden UNDER the initial screen....press "S" when prompted for the initial driver....and then scroll down under the first batch to find the second one...highlight it and press "S"....dont panic if the screen doesnt change immediately...it "feels" like Windows lags a bit but the screen DOES change.
15. SATA cables dont always "sit" snugly in Barracuda drives...I tried 3 different cables from legit manufacturers in 2 different Seagates....they all fit...they all work...but just a tiny amount of pressure unseats them....use caution and try to keep any other cables from pressing OVER the SATA near the HD.
16. Bench test your system for at least 24 hours of continuous useage before you move it or do anything else with it......it just makes sense to see if anything shorts out or heats up......
Feel Free to email me ([email protected]) if you have any questions or want any ideas.....MSI has made my first real build a blast!
JJ

Hi
Welcome, glad you got some benefit from the threads, it all so easy once you've done it a few times, aint it.
Glad your going well, now you can help others
you could also join the folding team and help medical research.
enjoy
cheers
jocko

PXI configuration first time

Similar Messages

Maybe you are looking for